IDoc - XI (BPM) - File, Successful status but no message generated

Hi,
I am trying to do Sravya's blog for BPM correlation.
I am sending IDocs from R/3 system to XI, even though message shows successful status there is no message is created on the receiver.
One strange thing is when I go into the SXI_MONITOR -> process (radio button) -> messages -> PE is taking me to the <b>Inbound Queue</b> not to the workflow log.
The next button is outbound status has green flag (message scheduled on outbound side).
Could you please help me resolving this problem.
Thanks
Kiran
Message was edited by: Kiran Reddy

Thanks and that solved the problem.
Now my multi source mapping is not working any ideas ?

Similar Messages

Error in idoc of basic type artmas05 - status 51 with Message no. MG537

Hi all,
I tried to upload the material master table through idoc creation of basic type artmas05. But when i'm trying to do that i'm getting status 51 with Message no. MG537. then I analysed the application log which displays the following
*The field MARA-MEINS/BAPIE1MARART-BASE_UOM(_ISO) is defined as a required
field; it does not contain an entry
*The field MARA-TAKLV/BAPIE1MARART-TAX_CLASS is defined as a required field; it does not contain an entry
*The field MARA-TRAGR/BAPIE1MARART-TRANS_GRP is defined as a required field; it does not contain an entry
*You have not fully maintained the tax classifications
*The field MAW1-WLADG/BAPIE1MAW1RT-LOADINGGRP is defined as a required field; it does not contain an entry
But i hv given values for all the above fields in their respective segments.So can any1 suggest me how to proceed further.
It would be helpful if someone could tel me the required fields in idoc to upload material master table through idoc.
Thanks in advance,
Revathi.

Hi,
Anybody please tell me the reason for the following error, despite giving all the field values mentioned there. The same error occurs even if I run the BAPI (which the ARTMAS iDoc uses) directly by passing values.
The field MARA-MEINS/BAPIE1MARART-BASE_UOM(_ISO) is defined as a required field; it does not contain an entry
The field MARA-TAKLV/BAPIE1MARART-TAX_CLASS is defined as a required field; it does not contain an entry
The field MARA-TRAGR/BAPIE1MARART-TRANS_GRP is defined as a required field; it does not contain an entry
The field MAW1-WLADG/BAPIE1MAW1RT-LOADINGGRP is defined as a required field; it does not contain an entry
Regards,
Gowri.S

BPM Mapping scheduled status in SXI_MONITOR Message scheduled on outbound

Hi All,
Please help me how can i solve following issue.
My Scenario WebService - PI - Proxy.
One of the message gets an error in the moni. where I get an green flag 'Message Scheduled on the outbound side".
The design was working fine earlier. It is giving problem now.
I tried following options:
1) I tested the mapping - it is working fine.
2) I checked Cache - the status is fine.
3) I checked Inbound queue(SMQ2) there are no messages stucked in the queues or saved in (smq3). Here i am using EOIO.
4) I checked SWWL - there are message with COMPLETED and STARTED but there are not ERROR messages.
Could any one please tell me - Can i DELETE - COMPLETED messages from SWWL? If i delete what is going to happen.
Please advice
Thanks
VR

Hi,
In SXMB_MONI click on "PE" and open the Graphic Flow to see where actually your BPM has failed
Also suggesting to check both the Queues....SMQ1 and SMQ2.....
delete an instance from SWWL only if it is in error state.....
regards,
Abhishek.

Create IDoc from flat file - How to do the message mapping

Hi everybody,
I want to create an IDoc from a flat file.
The file structure looks like this:
MT_XYZ
- Node001       0...1
- Leaf001
- Node002       0...unbounded
   - Node003    0...1
      - Leaf002
      - Leaf003
   - Node004    0...1
      - Leaf004
   - Node005    0...1
      - Leaf005
I have created a mapping and all the other stuff to set up the IDoc adapter.
Now when I try to test the interface the IDoc is created properly but obviously no information from the nodes "Node003" to "Node005" is inserted in the IDoc. Only the information kept in the elements (leafs) of "Node001" are inserted.
All IDoc segments and their "Segment" elements are linked to the root node of the file structure "MT_XYZ". I tried to link some IDoc segments only to "Node002" but then this segment is not created.
So how can I set up the message mapping in a way that the information from "Node003" to "Node005" is transported to the IDoc? Can anyone help me here?
Thanks in advance for all answers!
Regards,
Torben
Edited by: Torben Hönemann on Dec 14, 2009 4:26 AM

Hi Torben,
>>I want to create an IDoc from a flat file.
So you are using File content Conversion on the sender side. Right?
>>no information from the nodes "Node003" to "Node005" is inserted in the IDoc.
Are these information available in the source XML (you can check in transaction SXMB_MONI-> Input Payload).. There is a limitation in File Content Conversion of File adapter and it is that I can make an XML structure of 3 level.. Since these nodes details are in level 4 and 5 they should be missing in Source XML structure itself (after content conversion of File adapter). check that
>>So how can I set up the message mapping in a way that the information from "Node003" to "Node005" is transported to the IDoc? Can anyone help me here?
So you need to take an alternate approach where you do File Content Conversion and make 3 level structure.. then using a mapping convert this three level structure to your 5 level one and then try to map with the idoc.
Check this blog for an idea
http://www.riyaz.net/blog/xipi-file-content-conversion-for-complex-structures/
http://www.riyaz.net/blog/xipi-convert-flat-file-to-deeply-nested-xml-structures-using-only-graphical-mapping/
Regards
Suraj

When I open iPhoto it always tries to download files automatically. But the message is always that they can't be downloaded. I can't turn this auto action off and it is driving me crazy. Any help?

Is there anyone that can help me with this problem? The files are always nothing I recognise and they won't download. I always have to manually stop iPhoto from trying to download them. Is there a way to stop this auto downloading?

Quit iPhoto and to to the iPhoto library (by default in your pictures folder) - right click (control click) on it and select show package contents - find the folder named import (or importing) and drag it to the desktop - DO NOT MAKE ANY OTHER CHANGES - launch iPhoto and you will be fine.
Open the import(ing) folder and if there is nothing in it that you need move it to the trash and empty the trash
LN

BPM Status "In Process" - Message reached ECC successfully ??!!!

Hi,
I need help to resolve one issue which we are facing : (this is kinda strange)
==========================================================================
We are using a BPM in one of our scenario where acknowledgements are sent in and out from PI to ECC. The BPM is relatively complex.
The issue we are facing is : -
The BPM shows status "In Process" but the messages have reached ECC and the functional team has confirmed the receipt of the message. All the tables / databases are updated as desired. We were yet to receive the response from ECC but strangely the BPM is not completed but the message has moved out of PI to ECC and updated the tables!!
My question is : - How come the messages reached ECC even though it showed that the BPM is not completed?
==========================================================================
Action points which I have taken : -
1.) I have digged in sxmb_moni_bpe and went through the messages in the payload couldn't find anything there which could have answered my question.
2.) Matched the data and went through all the message flow comparing the time stamp - didnt find much here too!
3.) The graphical message flow shows "Response from ECC" - in Wait state and a white block but still the messages got updated. Found it really strange!! .. If the BPM does not get completed, the messages should not move out!!
============================================================================
workaround :-
1.) I thought of putting a wait step and an exception that if the messages do not reach PI within the stipulated time, it will throw and error in PI. But still the question needs to be answered as to "How come the messages reached ECC even though it showed that the BPM is not completed?"
Kindly suggest.

I didnt find anything much there .. and moreover it is a Production system where we faced the issue so anyway I did nt have access to it. We have confimed from ECC functional team on the same and have logically deleted the process from PI.
Thanks anyway!

Problems with multiple idocs in one file ( Inbound file )

HI,
Thanks in Advance for your suggestions.. Highly appreciated.
We have problems with multiple IDocs in one file.
We are using XIB ( Amtrix ) as Middleware to receive the files.
Curretenly When the file contains one IDoc then there is no problem. IDoc is created and everything is ok.
If file contains two IDocs ( for example two messages ORDERS and DELVERY ) then it is creating two IDocs but both IDocs contains ORDERS plus DELIVERY segements information. That is the problem. Some how SAP unable to differentiate the IDocs in the file.. But it knows that how many idocs are there in the file..because it is creating exact number of idocs.
We are using TRFC port ... Do I need to change it to File port..
When we have more than one idoc do we need set any parameter in the file ...

Thanks for the swift response. Always ideas are useful.
As of now , Middleware cannot split the file.
Thing is SAP is creating two Idocs with different message types. Problem is First IDoc contains ORDERS message type but also DELIVERY segments as well. Second IDoc with DELIVERY message tyoe but ORDERS segments as well... This is the problem... I think we are missing some field activation in file for EDIDC record.
As far as I know file port supports the number of IDocs in one file.. Hope TRFC port also supports that

IDoc to Flat file scenario - abap mapping

Hi All,
I have to do some IDOC to Flat file scenarios. In Order to generate the file in required format I will have to add all segments(Nodes) of Idoc in FCC receiver. We also have other option of doing it through ABAP Mapping which I found in one blog.
Now my question is : Is it better way of doing it through FCC or ABAP Mapping?
Ofcourse from development point of view ABAP Mapping looks easier as FCC is very time consuming task.
Is there and performance issues in either of the approach?
Thanks and Regards,
Atul

Hi VJ and Harald,
Thanks for your replies.
I am not having PI7.1 however the given blog was very informative.
I will try using file port approach as suggested.
Thanks and Regards,
Atul

Jasper report issue report row 65535 but can't generated correctly

Hi All ,
We are trying to create report with jasper report . The issue is sometime generated report can be open.
Below is test case and result .
1.     when dummy all the returned field of procedure to 1 and 20000 rows are to printed in report. The file size is 7564K. The excel can be open after several minutes waiting.
2.     When dummy the procedure only return 5000 rows with actual data, the field type may be char, number. The file size is 2010K. The excel can be open quickly.
3.     When dummy the procedure only return10000 rows with actual data. The file size is 3999K. The excel cannot be open.
What the issue may be?
Below is our code.
     * Generate the the report, currently generate excel report.
     * @param results - data set return from procedure execution
     * @param parameters - input parameters for Jasper Report design
     * @param procName - Jasper file name
     * @param outputFile - used as report file name
     * @throws JRException - Jasper exception
private void ReportGenerator(List<ScriptParameterObject> results,HashMap<String, Object> parameters, String procName,String outputFile) throws JRException, Exception
logger.info("Creating report: " + outputFile + ".xls");
//URL en = ClassLoader.getSystemResource("jasper"+java.io.File.separator+procName + ".jasper");
          URL en = ClassLoader.getSystemResource(procName + ".jasper");
if(en==null)
throw new Exception("Can't find jasper file: " + procName + ".jasper");
logger.debug("Loading jasper file: " + en.getPath());
//InputStream isJasper = ClassLoader.getSystemResourceAsStream("jasper"+java.io.File.separator+procName + ".jasper");
InputStream isJasper = ClassLoader.getSystemResourceAsStream(procName + ".jasper");
JasperReport relatorio = (JasperReport) JRLoader.loadObject(isJasper);
          SapiData sapiData = new SapiData(results);
          logger.debug("Filling report file ..." + results.size());
JasperPrint impressao=null;
try{
          impressao = JasperFillManager.fillReport(relatorio,parameters, sapiData);
catch(Exception ex){
System.out.println(ex); ---never catch error. but not know why the .xls can't open
if (impressao == null) {
logger.debug("impressao == nul.");
logger.debug("Filled report file successfully.");
          impressao.setLocaleCode(Locale.getDefault().getCountry());
          JRAbstractExporter saida = null;
          saida = new JRXlsExporter();
          saida.setParameter(JRExporterParameter.JASPER_PRINT, impressao);
          saida.setParameter(JRExporterParameter.OUTPUT_FILE_NAME, outputFile     + ".xls");
          saida.setParameter(JRXlsExporterParameter.IS_ONE_PAGE_PER_SHEET,Boolean.FALSE);
          saida.setParameter(JRXlsExporterParameter.IS_WHITE_PAGE_BACKGROUND,Boolean.TRUE);
          saida.setParameter(JRXlsExporterParameter.IS_REMOVE_EMPTY_SPACE_BETWEEN_ROWS,Boolean.TRUE);
          saida.setParameter(JRXlsExporterParameter.IS_COLLAPSE_ROW_SPAN,Boolean.TRUE);
          saida.setParameter(JRXlsExporterParameter.MAXIMUM_ROWS_PER_SHEET, Integer.decode("5000"));
logger.debug("Exporting excel report file ...");
          saida.exportReport();
          logger.debug("Generated excel report file successfully: "+outputFile + ".xls");
          /* - used for generate html report
          JRAbstractExporter htmlExp = new JRHtmlExporter();
          htmlExp.setParameter(JRExporterParameter.JASPER_PRINT, impressao);
          htmlExp.setParameter(JRHtmlExporterParameter.OUTPUT_FILE_NAME,outputFile + ".html");
          htmlExp.setParameter(JRHtmlExporterParameter.IS_REMOVE_EMPTY_SPACE_BETWEEN_ROWS,Boolean.TRUE);
          htmlExp.setParameter(JRHtmlExporterParameter.IS_WRAP_BREAK_WORD,Boolean.TRUE);
          htmlExp.exportReport();
     }

I hava the same problem.Hava you solved it?

IDOC- BPM- File - Acknowledgements

The Scenario is to send IDocs from SAP through BPM to a file system. I want an acknowledgement to be sent back to SAP system incase of any error while writing the file. To simulate an error, I am giving an unauthorized file path. I have enabled application acknowledgements in the send step of BPM. I receive a negative acknowledgment from the File system to BPM saying unauthorized. But the acknowledgement from BPM to SAP system has the status 'Waiting for an acknowledgement' and the status of IDOC in SAP is still '03'.
Please note that in case of successful message, the acknowledgement is sent all the way back to SAP and the status of IDOC is set to '41' from '03'.

Vinoda, Are you sure the file system is sending you an Application acknowledgement ? To receieve an application acknowledgement in your send step, the receiver Business System should be capable of sending an acknowledgement back, i doubt whether a file system is capable of doing it, unless you have designed a clever mechanism of doing this. was just curious...
Thanks
Saravana

Idoc ---- BPM ------ file

hello experts,
I have Idoc to file scenario by using BPM,
I have generated IDoc and it generated successfully
Idoc reached from SAP to XI. but, it is not entering into BPM.
i have checked the queue, refreshed chache and restarted the BPM.
i was not able to reactivate BPM becuase it in Quality(4 days back only i have trasported from DEV to QA)
can anybody provide some idea to resolve this issue ASAP.
Thanks in Advance.
Radhika

Hi,
I hope you might have already confirm with the Receiver step parameters.
Is it working fine in your development system. Have you tested over there.
Check if all objects have properly transported to Q.
Thanks
Swarup

Idoc in 53 status but not processed completely. Missing authorisation error

Hi ,
Some of the ORDER Idocs are in 53 status, but the orders are not processed successfully and no PO created for these Idocs.
They got below warning message when I checked in WPER transaction code.
" Missing authorization: Purchase Order Create Purchasing Grou 110 " - "Workitems (tasks) were created for this IDoc"
This is happening once in a while for some of the idocs. Remaining all idocs are posting successfully.
These IDOCu2019s are processed via user background. Not sure why we have authorisation issues as this user has SAPALL. Any ideas?
Thanks
Deepthi.

done.

IDOC-BPM-FILE scenario ERRORS

Hi gurus,
I am trying to send IORDER01(pm order) from an R/3 system to a file, which works fine.
but when i try to use some business logic like if order type = 'PM01' then only i have to write to the file, using ccBPM, it fails...
this is my first BPM scenario and am having trouble....have read lot of blogs etc...can u please tell me where i am going wrong...
I have a data type DT_FILE for writing to the file.
I have interfaces:
si_oa_iorder(outbound asynchronous interface for file)
si_aa_iorder(abstract asynchronous interface for idoc)
si_aa_file( abstract asynchronous interface for file)
si_ia_file (inbound asynchronous interface for file)
I have message mapping MM_IORDER2FILE mapping IDoc to flat file structure
I have operation mapping OM_IORDER2FILE where I have mapped si_aa_iorder and si_aa_file
(( Is this right? are both abstract interfaces to be mapped? or do i need to create more mappings like si_oa_iorder to si_aa_iorder etc? please clarify...))
My IP is very simple with just a 'recv step' having container element of type si_aa_iorder and 'send step' having container element of type si_aa_file to start with..i haven't yet put the switch control etc...even such simple IP fails....
I have created Configuration objects like
Business System for file receiver
Business component for Idoc sender with adapter specific details set
Communication channels for Idoc and file adapters
No sender agreement as it is Idoc communication
Receiver agreement between the Integration Process(IP_IORDER2FILE) and the file server
2 Receiver determinations between BC_idoc_send to IP and other from IP to FileRecv system
2 interface determinations , one from si_oa_iorder of BC_idoc_send to IP and other from si_aa_file of IP to file recv system.
This is my setup and this fails....
My question is..is my message mapping and operation mappings correct? and can u see any obvious blunders i am doing?
please bear in mind that with same interfaces and sending and recv components, it runs fine without BPM....so please look at the BPM bit of mappings/config that i might have missed and please advice asap..
Thanks in advance and i am sure there would be lot of gurus for whome it is just a peanut...so please reply...
Regards
Jhansi

Hello,
I am trying to implement one pi scenario :
File -> file adapter -> ccBPM -> soap receiver adapter -> web service request -> web service response -> ccBPM -> output file adapter.
The web service that I call works file from wsnavigator. I have created all the design and configuration objects
needed for the scenario.
I place a file with following contents:
<?xml version="1.0" encoding="utf-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SOAP-ENV:Body>
    <pns:GetSetNameWS xmlns:pns="urn:file2soap2fileWSVi">
     <pns:name1>ajeet</pns:name1>
      <pns:name2>phadnis</pns:name2>
    </pns:GetSetNameWS>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
When I look at the process monitor I get this:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
<SAP:P1>Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error when determining the receiver: Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have no clue about this error. Can you help me with this ?
If yes I can send you more details, if you liked 
Hoping to get help from you,
Cheers,
Ajeet Phadnis

Idoc-bpm-file scenario

Hi gurus,
I am trying to send IORDER01(pm order) from an R/3 system to a file, which works fine.
but when i try to use some business logic like if order type = 'PM01' then only i have to write to the file, using ccBPM, it fails...
this is my first BPM scenario and am having trouble....have read lot of blogs etc...can u please tell me where i am going wrong...
I have a data type DT_FILE for writing to the file.
I have interfaces:
si_oa_iorder(outbound asynchronous interface for file)
si_aa_iorder(abstract asynchronous interface for idoc)
si_aa_file( abstract asynchronous interface for file)
si_ia_file (inbound asynchronous interface for file)
I have message mapping MM_IORDER2FILE mapping IDoc to flat file structure
I have operation mapping OM_IORDER2FILE where I have mapped si_aa_iorder and si_aa_file
(( Is this right? are both abstract interfaces to be mapped? or do i need to create more mappings like si_oa_iorder to si_aa_iorder etc? please clarify...))
My IP is very simple with just a 'recv step' having container element of type si_aa_iorder and 'send step' having container element of type si_aa_file to start with..i haven't yet put the switch control etc...even such simple IP fails....
I have created Configuration objects like
Business System for file receiver
Business component for Idoc sender with adapter specific details set
Communication channels for Idoc and file adapters
No sender agreement as it is Idoc communication
Receiver agreement between the Integration Process(IP_IORDER2FILE) and the file server
2 Receiver determinations between BC_idoc_send to IP and other from IP to FileRecv system
2 interface determinations , one from si_oa_iorder of BC_idoc_send to IP and other from si_aa_file of IP to file recv system.
This is my setup and this fails....
My question is..is my message mapping and operation mappings correct? and can u see any obvious blunders i am doing?
please bear in mind that with same interfaces and sending and recv components, it runs fine without BPM....so please look at the BPM bit of mappings/config that i might have missed and please advice asap..
Thanks in advance and i am sure there would be lot of gurus for whome it is just a peanut...so please reply...
Regards
Jhansi

Firstly, you said you are not using any Switch, then how are you specifying the condition ?
Secondly, your interface is not dependent on the BPM, its dependent on the configuration. BPM is a representation on how the interface works in step-by-step manner.
So, while checking the condition order type = 'PM01', you must be using the Switch, i believe, which has to options Branch1 and Branch Oherwise. Branch1 means when the condition is TRUE and BranchOtherwise is when condition is FALSE.
If you can let me know the condition statement that you have given in the Switch, I can try to tell you more.
-Sid

Multiple files to idoc without bpm

Hi
I have gone through the previous threads and came to know that n:1 is not possible without bpm. But in case of idocs you can collect them in r/3 system itself using RSEOUT00 program. But if my scenario is like.......you have 10 files which are coming through ftp and we have to send the idoc to the target system. Is there any way to do this scenario without bpm ??
Thanks
kumar

Hi palnati !
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Multiple IDocs without BPM(occurance change)
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
In case you have multiple IDoc types ref:
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
Have a look at this blog.. Might be helps to you..
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2748. [original link is broken] [original link is broken] [original link is broken]
Pls reward if useful

IDoc - XI (BPM) - File, Successful status but no message generated

Similar Messages

Maybe you are looking for