IDOC - XI - HTTP/MAIL (How to get the http response and send an email?)
Hi David!
If you are able to send any Http message in reference to message from XI (eg. with Idoc number or msg-id) there is no problem to process it in your scenario (even if comunication is asynchronous).
Regards,
Radek
You need a 2:1 mapping. source interfaces are Idoc and Http response, target interface is the mail.
As you can do his only for abstract interfaces, you have to create an abstract message interface based on the IDoc structure.
For the http call you need abstract async message interfaces representing request and response which you can use for the mapping and for the container variables inside the BPM.
Regards
Stefan
Similar Messages
-
Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA
Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA
Hello,
Exactly which USB device are you referring to? Is the device a NI product?
The Product ID for National Instruments DAQPad-6020E is 0x12C0. The USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093) (that is decimal 4243).
Also, here's a document on our website that will help you in configuring NI-VISA to control your USB device:
http://zone.ni.com/devzone/conceptd.nsf/webmain/6792BAB18242082786256DD7006B6416?opendocument
Swapnil P.
National Instruments Engineer -
I have been charged 274.55 from 8-23-2013 - 8-26-2013. These are not my charges. I need to know how to get the charges reversed and put back on my account ASAP. Please confirm!
You can contact iTunes Support via this page (we are fellow users here on these forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA
Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA
This question has already been addressed in this thread:
Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa?
John M
National Instruments -
How to get the kerning value and set it to back use script?
hi,guys
I come back again.
I encountered a kerning problem.
how to get the kerning value and set it to back use script?
Thanks very much!For both cases, the filename can be found on the FILE.ReceivedFileName Context Property. You can access this Property in a Pipeline Component or Orchestration and take any action you want, such as apply to a database.
The value is accessed by: MyReceivedMessage(FILE.ReceivedFileName)
In the case of a duplicate EDI Interchange, you would use the Failed Message Routing feature to capture the error message with either an Orchestration or Send Port. -
When I went and connected my phone to my laptop and hit restore and it got rid of everything my photos my contacts everything and I don't know how to get the stuff back and if you need to know I have an IPhone4S
I take it you were replacing an older iPhone and this was the first time you plugged it in? If so, that's what happens. It restored the backup of your old phone. A backup of the current phone is not made in those circumstances.
If that's not what happened, you need to clarify. -
How to get the Equipements number and desciption for the contract item ?
Hi Gurus,
How to get the Equipements number and desciption for the contract item items? It would gr8 helpful to me...
VBAP,,EQUI,,,,,,?
Thanks
KrisnaCheck with below tables :
EQUI Equipment master data
EQKT Equipment short text
EQUZ Equipment time segment
Thanks
Seshu -
How come I don't get the whoosh when I send an email?
After I installed Mavericks I don't get the whoosh when I send an email. If I restart I'll have it until the machine goes to sleep and then it'll disappear agian.
Note: None is not an option in all Countries and/or Regions.
If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Please help me how concatenate all the error messages and send it as out parameter value.
Hi Experts,
Please help me how concatenate all the error messages and send it as out parameter value.
Thanks.Agree with Billy, exception handling is not something that is done by passing parameters around.
PL/SQL, like other languages, provides a suitable exception handling mechanism which, if used properly, works completely fine. Avoid misuing PL/SQL by trying to implement some other way of handling them. -
Apple Mail - how to get the first word in a sentence to auto-capitalize
How to get the first word in a sentence to auto-capitalize
Anwarsomething to look forward to then, because we get used not to use our shift button any more, since iPhone and iPad do it for us. entourage and other ms stuff do it. pages does it too now (put it on in the auto-correct in preferences). bizarre however some loose the capitalization when you copy the text. pages to stickies or mail does not. that's good !
-
How to get the client date and time ?
Dear Sirs...
Using jdeveloper 10.1.2.0
How can i get the client date and time using the HttpServletRequest ?
thanks for any help in advance
best regardsIf your code is running on the client pc you can just create a new instance of the java.util.Date class. That class automatically defaults to the current time of the client machine. Otherwise if you're running the code on the server, you could insert/post the client date/time by adding its string representation as a parameter to the HTTP request object.
Ronald -
How to get the class name and field name dynamically
Hi
I have a class (ex: Contract) the fields (ex : a,b,c) .i need to get the class name and field name dynamically
ex
if( validation file for the field Contract.a){
return contract.a;
}else if(validation file for the field Contract.b){
return contract.b;
how to pass the field name and object dynamically
Please help me .............
Thanks in Advance..
Edited by: 849614 on Aug 11, 2011 6:49 AMYoungWinston wrote:
maheshguruswamy wrote:
Agreed, but IMO, i still feel its best if there is no tie in between consumer class level details and the database it talks to. A service layer is needed in between them.Sounds like you've done a bit of this before. Me, I've either been a modeller/DBA, doling out data, or a nuts and bolts programmer (and actually more toolmaker than apps, but did a bit of that too).
Do you know of a good book about the "middle ground" (ie, these service layers)? I understand it empirically, but haven't had a lot of exposure to it.
Winston
Edited by: YoungWinston on Aug 11, 2011 10:34 PM
PS: Apologies. Edited my previous post, presumably while you were composing your reply, when I finally realized what '.filed' meant.Most of my work is in web development, never been a DBA :) . The biggest 'concern' in my shop is 'separation of concerns'. The UI group reports up to a different IT head, the DB group reports up to a different IT head and so on. The looser the coupling between these systems, the lesser the project costs (Integration, QA etc) are. Martin Fowler's books contain good information about separation of concerns in an enterprise environment. The two books which i recommend are
[url http://www.amazon.com/Patterns-Enterprise-Application-Architecture-Martin/dp/0321127420]Enterprise Application Architecture and
[url http://www.amazon.com/Enterprise-Integration-Patterns-Designing-Deploying/dp/0321200683/ref=pd_sim_b_1]Enterprise Integration Patterns -
How to Get the Login Window and/or Bypass Login Items?
Greetings, folks!
This is a silly question, but the old standby of “hold down the shift key” doesn’t work in 10.6.1:
What key(s) need to be pressed to get the LogIn window and then after LogIn, to bypass LogIn Items?
Thanks!!
Richard FairbanksNot here, on a fresh (erased) install.
Pressed either before or after the initial gray Mac appears, the shift key does not access the LogIn screen. It is possible to bypass the account’s LogIn items by holding down the shift key after the LogIn screen has been called and successfully commenced, but how does one call the Login screen when the Mac is normally set up for automatic login?
It used to be the shift key . . .
Thanks! -
How to get the PO response number
hi,
i need to get the Purchase Order Response number for a given PO number and item.
i have checked BBP_PD_PO_GETHISTORY FM, for few of po numbers i'm not able to find the POR number in this FM.
can anyone suggest how to get the POresponse number.
help me soon.
thanks.hi all,
thanks for the valuable info, now i'm able to get the POR number.
could you please tell the DB table name, so that i can fetch directly and i can improve the performance.
thanks,
gupta. -
SDK : how to get the server adress and port ?
Almost everything is in the title, I'm look for code to get the server URL and port where the ME is running ;o)
There should be some standard API I guess.
Thanks
RegardsHi,
In the code that I write I usually have access to the HTTP Request Object.
String serverName = request.getServerName();
String serverPort = request.getServerPort();
Then I just do a compare on the returned value to see if I am on our Test or Production server.
if(request.getServerName().indexOf("prodservername") >= 0)
// PRODUCTION CODE HERE
else
// TEST CODE HERE
Hope this helps,
Mike
Maybe you are looking for
-
How to find combinations of a string
Hi Dear, How can we find the combination of a given string whatever input given by user. If the String is A1C the possible outcomes are: A1C AC1 1CA 1AC CA1 C1A Best Regards, Aditya
-
Rounding off differences for Vendor and Customer payment
Dear All, Rounding off differences for vendor payment in T Code F-53 is giving the following error when I want to post. Item category 06000 not allowed in accounting transaction 1000/0001 Message no. GLT2001 Diagnosis The online document splitting is
-
Does anyone know if it is possible to create an integrated report of all program / project risks, issues and opportunities as identified on project sites? We plan on having our project teams identify and manage these on their project sites but would
-
Restriction of Time-dependent data (Cost Center) according to a specific role
Dear experts, Has some one of you implemented a functionality to restrict Time-dependent data (for example, Cost Center) edition, according to a specific role assigned to an End user? I imagine it is possible, but we should develop an User-exit in or
-
Software update for the iPod Nano 6th Gen
Is there gonna be any software update for the iPod Nano 6th Gen for video playback??