Idoc2File- WE20 Configuration Details

Hi,
The scenario is IDoc to File , Please suggest below details for Outbound IDOCs
   IDOC --- REMADV.PEXR2002
   IDOC --- MBGMCR.MBGMCR03
*We20 --> Outbound Parameters --> Message Control*
Application -         ???
Message Type-    ???
Process Code -     ???
Thanks,

Hi,
Below T-codes can help you find information:
Check Transaction NACE to see what applicatios you can use for different objects.
Check transaction WE42 for all inbound process codes
Check transaction WE41 for all outbound process code.
Check transaction WE64 for inboud / outbound message types and related process codes.
Not sure if any standard process codes are avaialable for the mentioned outbound idocs.
Post you question in other forum like MM / SD .

Similar Messages

FI-Idoc2File: We20 Configuration

Hi,
For IDoc to File scenario , I have checked in T - code NACE but no entry is there for FI - Idoc, Please suggest below details for Outbound IDOCs
IDOC --- FIDCC1.FIDCCP01
*We20 --> Outbound Parameters --> Message Control*
Application - ???
Message Type- ???
Process Code - ???
Thanks.

HI ,
Hope This will help you.
Message Type FIDCC1
Inbound Event Code FID1
Function IDOC_INPUT_FIDCC1
Check this transection code to help youself. WE42
It will tell about the a proper/relevent process code for the inbound idoc in the partner profile.
Regards
Prabhat Sharma.

Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing : "mac os x snow leopard cannot be installed on this computer" And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1

Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing :
"mac os x snow leopard cannot be installed on this computer"
And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1
Intel Core 2 Duo
1.83Ghz
l2Cache: 2mb
Memory : 2GB
Bus Speed: 667MHz
Please help me......
Thanks

Actually i have Mac OS X 10.5.4 DVD, I need to upgrade it to Snow Loepard(OS X 10.6)...
Please suggest me what to do???
Thanks

Configuration Details for GL account, Fund and Funds center

Hi All
I am executing budget report by using FMRP_RFFMEP1FX. In this report shows the fundcenter wise invoice details. As I execute the report with different fund center I am getting different output that is not match with actual one for that I want to know which transaction code maintains the fund, Fundcenter configuration details.
1. Which transaction code maintained GL, FUND and Fund center configuration?
2. In SPRO where to find the fund and fundcenter configuration details.
Please let me know
Thanks & Regards
KRISHGUNA

In SPRO go to Public Sector Management to find the configuration details for Funds Management.
Thanks and regards
Kedar

Configuration details for RFID devices in warehouse while delivery

Please suggest me some configuration details for RFID devices in warehouse while delivery .
Regards,
Manish

I read the "Config" in "– Once the Non-Cisco Devices are moved to the managed state, it triggers the MIB II level of Inventory for Inventory, Config and Image Management support and data collection." as "config management", meaning any retrieval of configuration informations possible through polling MIB II.
OTOH, the "Config" in "– Config and SWIM functionalities are not supported. Only system and interface information (MIB II) is collected for Non-Cisco devices through Inventory." is probably referring to the act of deploying/pushing configurations to these non-Cisco devices.

CIN Condition types with full configuration details

Hi
Can any one tell me the Condition types (SD & MM) used in CIN Configuration.
please provide the configuration details of all Condition types Ex. Condition Class, Condition category, possitive or negitive ?
Thanks all
Sree

hi
refer following
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/cin%252bconfiguration
http://help.sap.com/erp2005_ehp_03/helpdata/EN/0e/db7eb4e9114d85a9335fb1df617504/frameset.htm
also check this doc the part after tax on goods movement is for CIN
http://help.sap.com/bp_bblibrary/600/html/J05_EN_IN.htm
http://www.scribd.com/doc/2527809/CINcustomizing-1
regards
KI

Sub-contract challan output- configuration details..?

Hi gurus
Can anybody send me the configuration details for sub contracting , and sub contracting challan output screen layouts in SPRO.
Because in my company i m not getting Company details in Sub-contract challan print out in front sheet,
1 challan with 2 pages.
Thanks
sap-mm

r u using std SAP format or Devoloped format
because if ur using std format unless and untill u put company details in config u cant create 57F4 challan
if ur using developed report then contact the ABAP person
regards,
snb

DB configuration details

Based on the below thread I am working on a JDBC Scenario.
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
The database I am using is a freeware. Now what are all the configuration details needed to fill my JDBC adapter, how to get that from my DB
Thanks.

Hi Jenin,
The below is the exmaple of MS-Sql similarly u can configure with ur freeware database <go to their site>
Must see
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
After you install the driver you use the Sender or Reciver JDBC adapter to connect to the database.
The parameters in the JDBC adapter,
If you have already deployed the drivers (msbase.jar, mssqlserver.jar, msutil.jar).
Driver:
com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection for MS SQL Server:
jdbc:microsoft:sqlserver://<server>:1433;databaseName=<dbname>
If you are using the new SQL Server 2005 jdbc driver (sqljdbc.jar). Setup is basically the same, except the driver is now:
com.microsoft.sqlserver.jdbc.SQLServerDriver
And the URL is slightly different as well:
jdbc:sqlserver://host:1433;DatabaseName=name

***reward points if helpful
<a href="/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30:///people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Message was edited by:
Ajay Kumar

Table needed- Variant configuration details of a material in a sales order

Dear Friends,
I would like to display all variant configuration details/characteristics and values of a particular item in the sales order in a table. Is there any standard SAP table available to serve this purpose??
Ex: I would like to give the sales doc no and the item no and material. The system has to display all the variant configuration details (Characteristics and the values) for the particular item
could you please suggest any other methods to achieve this?
Regards,
Kali

HI Kali
There is no standard SAP table available for your requirement.
Instead use FM "VC_I_Get_Configuration", and pass your sales order and item number to fetch Variant char. value for that line item in sales order.
This is the only solution.

Cloud Control 12c: Configuration Details Error

Hi,
I'm currently in the process of installing the Oracle Enterprise Manager Cloud Control 12c, after typing the configuration details (step 5 of 8), I get an error popup window stating the following:
The following prerequisite check failed because the ORacle Database, where the Management Repository will be configured, does not meet the configuration requirements. Fix the issue manually base on the recommendation offered for this prerequisite, and click OK. For more details check the logs: /oraInventory/logs/emdbprereqs
Prereq Name:
Check the compatible instance prarameter value.
Recommendation:
The compatible instance parameter must be set to the same version value as the database instance of the EM repository.
When I check the repos_perf.log, I see the following fails:
Executing Prereq Action
executing Action: select count(*) from v$log where 300000000 > bytes
output: 3
Prerequisite failed
Running component repos_perf Done
Executing component :repos_perf
Running component repos_perf Done
How can I set parameter?
Thanks,
Olivares

Hi Olivares,
Assuming your question is about setting the compatible initialization parameter, you can connect to the repository database (e.g. using sqlplus as user system or sys) to execute the following command, then restart the database:
ALTER SYSTEM SET COMPATIBLE = <value> SCOPE=SPFILE;
EX:
ALTER SYSTEM SET COMPATIBLE = '11.2.0.0.0' SCOPE=SPFILE;
If necessary, see the following doc for guidance on the parameter value:
http://docs.oracle.com/cd/E24628_01/install.121/e22624/appdx_about_emprereqkit.htm#CIHHBGFD
Regards,
- Loc

AS2 adpater-- Configuration details for both SND and RCV.

Hi All,
I need some details for both AS2 sender and receiver adapter.
Sender AS2 adapter :
1. Use Proxy
      Use Authentication
Which one we need to use?
2. what is this Proxy Realm or Authentication Realm??
3. Whether we need to enable Hostname check & HTTP keep alive? what is the purpose of these settings?
4. what is this Message subject ?? the content of this comes from the file name or file data?
5. Server certificate and private key authentication?? do we need to get these from partner system??
Receiver AS2 adapter :
1. Here also the same question when we need to use Proxy settings and when we need to use Authentication settings.
2. Dynamic attributes??
     Use dynamic attributes
     Use non-empty attributes.
What are the information we need to ask partner system to get the connection??
Please reply if anyone worked on these AS2 settings.
Thank You.
Regards
Krupakar.

hi..
Sender Adapter..
1.You can use both use proxy and use authentication.depends upon the requirement.
when you use proxy you have to give proxy server name and all parameters.That means proxy server acts like your actual server.To pass this data through the AS2 apdapter U hv to specify th following parameters.
Proxy Server : Your proxy server.
Proxy Port :The port of the proxy server.
Proxy User: User for optional authentication.
Proxy Password: Password for optional authentication.
Proxy Realm: Realm for optional authentication.
2. REALM
A realm is a part of Yanel which has its own configuration and repository. This allows you to run several subsites (which are independent of one another) in a single Yanel instance. For example, each department in your company can have its own realm. This allows one department to use its database as a content repository and another to use the filesystem to provide the content to Yanel
So proxy realm means u r authorized to use the proxy server
You use Use Authentication for -
>Used to enable/disable basic authentication.
Use Authentication Used to enable/disable basic authentication.
User: User for basic authentication.
Password: Password for basic authentication.
Realm: Realm for basic authentication.
3. if u check these options for the following purpose.
SSL Hostname Check: Validate common name with server name.
HTTP Timeout:Timeout in seconds for waiting for server
response.
4.Message Subject: This subject will be compared with the subject in the received message. This is used to find the
correct channel for the inbound message. Wildcards are allowed.Its the file data.
5. Your partne rwill provide u these details.
Receiver Adapter:
1.If u use the same in sender side then u hv to verify it again in the receiver system. Then only the communication is established.
3.u must have the AS2ID and the certificates.
THAnks
MAnas
reward points if helpful.

Seeburger AS2/EDI sender configuration details

Hello All,
I am working in EDI interface for ANSI X12 using Seeburger AS2/EDI , As I am new to B2B interface I have one doubt regarding Transaction set identifier code,interchange sender and receiver ID , In case of B2B add on it is clearly configured on EDISeparator Sender Adapter under filter
but in case of Seeburger AS2/EDI I am not understanding where we can add this details ,
Thanking you
Sridhar

Hello Sridhar,
for incoming data, the Seeburger BIC-Adapter uses a mapping in the Module-Chain which automatically detects the following parameters
- MessageType and Version (e.g. ANSIX12_850_V4010) from ST segment
- Interchange Sender ID (from ISA segment)
And the MessageSplitter then allows to forward each combination to a specific SenderAgreement for processing the data in PI.
This example shows an entry in the "MessageSplitter" that assigns an 850 V4010 message from a partner with the Sender ID 11111111111 to a specific SenderAgreement to process the data...
Kind Regards
Stefan

Configuration details about AS/2

Hi,
Please explain configuration steps for AS/2 adapter in both Outbound and Inbound side.
Thanks
Koteswara Rao

HI,
see the below links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/135b0b94-0701-0010-f6a9-86a14057544a
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
seeburger adapter configuration
Regards
Chilla

Configuration Detailed Level Navigation

Hi guys,
Does anyone know if it's possible to replace the words "Detailed Navigation" of the Tray's header to the name of a workset/folder that is at the 2nd-level navigation? (through configuration at portal)

Hi,
Yes, it is possible !
From the 'Content Administration' ->Portal Catalog->Portal Content ->Portal Users ->Standard Portal Users ->Default Framework Page ->Desktop Innerpage ->Detailed Naviagtion iView.
Replace the text 'Detailed Navigation' against the property 'Name'. Save the changes.
Hope this helps !
Regards
Srinivasan T

Configuration details for Collaboration

Hi, we have Collaboration installed without RTC at the moment. Portal vr. info, Ptl:6.0.2.4.7., CM:6.0.2.4.3. I have reviewed and implemented the Post installation tasks found in the help content (which are very vague). There does not appear to be any detailed documentation or "How To" Guides. Is anyone aware of more detailed instructions or examples for configuring the items found in the Collaboration Content/Related Links section? Ie. parameters for "Configure Room Backend",...
Default settings,
external_url_port * - 50000
external_url_protocol * - http://
external_url_servername * - p77728
room_repository * - /rooms
service_user * - collaboration_service
structure_link_name * - Structure
structure_repository * - /room_structures
Any help is appreciated.
Regards,
Scott

Hi Scott,
like you said, the post installation guide in the SP2 Administration Help Guide is quite vague, but you can also use the NW'04 Administration Guide. Maybe some parameters are not in your SP2 Patch 4 installation but the guide is more revised.
Here the link: http://help.sap.com/saphelp_nw04/helpdata/en/01/f7e626b95d8d46b8f4f7d764a726fc/content.htm
Concerning the Room Backend, change the default settings by adapting (external_url_)servername, port and protocol to the ones of your portal installation.
Hope this helps,
Robert

Idoc2File- WE20 Configuration Details

Similar Messages

Maybe you are looking for