IDOCHRMD - Task TS00408178 not triggered
Hi,
We are in a scenario where the HR hierarchy is synchronised with SRM.
The IDOCS type are HRMD_ABA,and I wanted to set up a task to monitor them, I have found the TS00408178 HRMD_Error.
It seems to be the appropriate one.
I have activated the object type IDOCHRMD event INPUTERROROCCURRED on the task
I have maintained the possible agent, set up the same agents (Organisation) on the IDOC in WE20.
However when the IDOCS are in status 51(error in the application) the worklfow is not triggered
When I set up the trace on the event nothing is recorded
Do you have any thought on this ?
Regards
Stephane
Hi
I have done all that.
And nothing is in the event log .
I wonder if the object IDOCHRMD is corresponding to the IDOC type HRMD_ABA;
In transaction BD87 if I select the IDOC and press the Object Key button (MAJ +F9) in the type of Object and object key field nothing appears ..
Similar Messages
-
IDOCHRMD - TS00408178 not triggered
Hi,
We are in a scenario where the HR hierarchy is synchronised with SRM.
The IDOCS type are HRMD_ABA,and I wanted to set up a task to monitor them, I have found the TS00408178 HRMD_Error.
It seems to be the appropriate one.
I have activated the object type IDOCHRMD event INPUTERROROCCURRED on the task
I have maintained the possible agent, set up the same agents (Organisation) on the IDOC in WE20.
However when the IDOCS are in status 51(error in the application) the worklfow is not triggered
When I set up the trace on the event nothing is recorded
Do you have any thought on this ?
Regards
StephaneHi
I have done all that.
And nothing is in the event log .
I wonder if the object IDOCHRMD is corresponding to the IDOC type HRMD_ABA;
In transaction BD87 if I select the IDOC and press the Object Key button (MAJ +F9) in the type of Object and object key field nothing appears .. -
Dependent process task is not triggering - OIM 11.1.2
Hi All,
In 'AD User' process definition, I have added a process task 'send email' which will send a e-mail notification on User profile location change.
I made it a dependent task of 'Change AD OU' (process defined by me, triggers when user profile location is changed).
Test performed
1) changed User profile location attribute from identity self service.
Test Result
1) User profile Location is updated.
2) 'Change AD OU' process task is triggered and executed successfully. And process task returned success and the status value is 'C'
3) Dependent task 'send email' is not triggered.
Verified following
1) both process task are made unconditional.
Please help me in knowing, why the dependent task is not being triggered.
Thanks in advance
PraveenHi Rajiv,
Thanks for reply.
I configured it according the link provided.
Now facing below issue.
When I changed first name of a user from identity console, 'Change First Name' process task is triggered and is assigned to XELSYSADM (coz, in the assignment tab I added only XELSYSAD). But the status of the process task is Rejected. Also, the changed 'First Name' value is not updated in the process form of the user. Hence the change is not reflected into AD.
Please tell me why the status is Rejected and changes are not reflecting.
Also, Please provide the solution to auto provision the modifications into AD.
Thanks in Advance. -
Task Does not get triggered when User is created through API
Hi,
Each new user in our OIM environment is supposed to have a iPlanet account. I have configured the access policy for the same and it works.There is also a process task which needs to be triggered once the user is successfully created in the DS. Following is my issue:
1.When the new user is created through the admin console, the user is provisioned successfully to DS as well because of the access policy and the task also gets triggered successfully.
2. There is an approval workflow for another resource, at the end of which a user needs to be created through APIs in OIM. The user gets created successfully in OIM and also get provisionined to DS just like in the above use case. However, the task fails in this case. I see that the task is being triggered from the user's resource profile, but the status is rejected.
Can someone please tell me why is this happening. I initially though there was some issue with my adapter for the task, but in case 1 it works just fine.
Following is the exception I get as soon as the iPlanet connector finishes creating the user in DS:
java.lang.ClassCastException: java.lang.String
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSETFIELDSONUSERCREATE.implementation(adpSETFIELDSONUSERCREATE.java:51)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
Thanks,
SupreethaHi,
Have you checked the process data that you are passing to this adapter and check the mapping of process data to the adapter variable. Try to log the value which you get from process data. I got this error when I was trying to use the literal value from process data as "true" for a boolean value. This is a bug. This value is not actually a boolean value. It threw me error too sometimes back. Either you pass the boolean value from adaptor factory as a literal value or change the type boolean both in your code and the adapter.
OIM works strangely. ;) All the best,
Manila -
When a task expires is not triggered in SharePoint designer workflow
Hi all,
I am using sharepoint designer workflow for document approval and the tasks are assigned in serial.. but the when a task expires event is not triggered.. I have set due date for the task process but still it is not triggered.. Can anyone tell me how
to resolve this issue..
I am using this option to escalate the task to the next approver if it is not completed within the specific duration.. Can anyone tell me if there is any alternative way to do this..Hi ,
I understand that when a task expires ,the workflow doesn’t create the tasks for next approval .This is how serial tasks works .You
need to complete the first task first before the next task is generated .So you can add actions by change the behavior of a single task .
Open the workflow in SharePoint Designer .Click Approval(1) to modify the approval process .
Choose ‘Change the behavior of a single task ’ on next page .Find the ‘When a task expires ’ section .
Add actions like ‘Rescind task’ (this action completes the task without an outcome) ,’Reassign Task’(reassign current task to another people ), ‘escalate task ’(escalate current task to manager) .
In this way ,the current task is whether completed or reassigned for completion ,then the next task will be created after current task is completed .
For more information about this task action ,please refer to this site:
Workflow actions in SharePoint Designer 2010: A quick reference guide :
http://office.microsoft.com/en-us/sharepoint-designer-help/workflow-actions-in-sharepoint-designer-2010-a-quick-reference-guide-HA010376961.aspx
Thanks
Entan Ming
TechNet Community Support -
Enable User task is not getting triggered
Hi All
We have a provisioning workflow configured. "Enable User" task is not getting triggered while the user is enabled in OIM. Can anyone give a clue as to how to get it triggerd? Rest all the tasks are fine (Create, Disable, Delete, and other custom tasks)
Thanks,
VinayThere is a OOTB scheduled Task "Enable After Start Date". once the user get enabled in OIM user profile. You have to run this task manually to have effect on corresponding RO for enablement. Else it will execute automatically as per scheduled time.
if the version of OIM is 11.1.1.5. There is an issue. update patch BP02. for same
--nayan -
Terminating Event Not Triggering
HI Guys,
I have added a custom task to call MRBR screen and set a Terminating Event for this task. It is a Asynch Method.
Through SAP_WAPI_CREATE_EVENT i am calling the terminating event but my task is not getting terminated.
I checked in SWEL i could see evnt log for my terminating event without Receiver type.
Kindly help me to sort out this issue.
Regards,
DheepakHi
Where have you written the code for triggering the termination event?
Also in your task have you created an entry:
WIOBJECT_ID FIPP TerminatingEvent Name.
When everything is done properly in SWEL you would see the receiver as workitem.
Thanks and Regards
Aman -
WF not triggering in Quality System
Hi,
We moved the Workflow to Quality System, but the event is not triggering.The event linkage is active and workflow customizing has been done.The WF-Batch user is having SUPER user group.Kindly help on this issue.
Thanks,
MohanOne reason were workflow is not triggered, WF and Event link not enabled.
Hope you are using BOR QMSM and triggering task for notification created in QM02,
1) try to simulate with SWUE and check whether WF is triggered or not for a dummy task created in QMSM
2) Check did you made WF Generic otherwise it will not trigger the WF
If you designate your workflow task as a "general task", this means that all users are authorized to start this task.
To restrict the number of authorized persons, you can assign the task to an object from the organizational plan (organizational unit, job, user,...). This is a general procedure and can be used with all types of tasks. If you assign the task directly to a user, only this person is authorized to start the task.
3) check for user authorization
4) Check for WF consistence swu5/swu4 -
Hi,
I have a web service in my BPM. This web service is an automated activity to send an e-mail based on user's decision. Everything works fine, except the e-mail is not triggered.
I configured this e-mail using Logical Destination and when I tested in the WSNavigator, it sent an e-mail.
So, my question here is, how to make sure this web service is getting called and how to trouble shoot this.
1. I checked in NWA, there is nothing related to this e-mail Web Service.
2. Checked in Process Composer: Manage Tasks, I cant see anything here.
3. Web Service is working fine with both Logical Destination and without.
I appreciate any help. Thanks.
Sunita.Hi Sunita,
You didn't say whether you configured the application communication via NWA->SOA Management->Application and Scenario Configuration->Application Communication' (CE 7.2). Since your BPM process is calling a web service you have to assign a profile to it. More information is available here: http://help.sap.com/saphelp_nwce72/helpdata/en/0B/EF46DBC6FA43C580E58EF2A829E343/content.htm
O. -
BDOCs not triggering on changin Contract Account thrU FM FKK_ACCOUNT_UPDATE
Hi,
We have integrate SAP ISU and CRM system. My scenario is, on Dunning til a specific level, customer is removed from Direct Debit if he's on an active Incoming Payment Method in a dunning activity.
In my scenario, I'm reading Contract Account Details using FKK_ACCOUNT_READ, deleting incoming payment locks if any, clearing three fields of Incoming Payment Method Id, Bank ID and Credit Card ID (EZAWE, EBVTY, CCARD_ID) and then passing the new structure in FM FKK_ACCOUNT_UPDATE in below format:
CALL FUNCTION 'FKK_ACCOUNT_UPDATE' IN UPDATE TASK
EXPORTING
x_fkkvk = wa_fkkvk
y_fkkvk = wa_fkkvk_old
vk_upd_mode = lc_change
udate = sy-datum
planned_or_real_changes = lc_real
TABLES
x_fkkvkp = lit_fkkvkp
y_fkkvkp = lit_fkkvkp_old.
But it is not triggering any BDOCs and therefore DD details can still be seen in CRM system.
I checked the standard process (CAA2), also uses the same FM in same format but it triggers BDOCs. I believe after this FM is called, some other FMs are being called to trigger BDOCs.
Can someone help me in finding out, where am I going wrong. Thanks.
RaviUse BAPI_ISUACCOUNT_CHANGE instead.
-
Running Function Module in Background with Update Task is not working
Hello Friends,
I have a "Z" Report Program where I am running this Report in Background using JOB_OPEN, JOB_SUBMIT, JOB_CLOSE. I am calling this in BADI.
In this Report I am calling another Function Module PRICES_POST which is a standard Function Module and in this FM there is another FM 'CKML_UPDATE_MATERIAL_PRICE IN UPDATE TASK'. Now when I am running the BADI these values are not being updated.
Friends I would like to know whether can we run Function Modules which are included with UPDATE TASK as Background Job program?
Kindly help me in providing your valuable suggestions in proceeding further.
Thanks and Regards
Pradeep GoliUsually the sequence of CALLs in your report should look like
CALL FUNCTION 'CM_F_INITIALIZE'
EXPORTING
msg_on_screen = c_x.
CALL FUNCTION 'CKMS_BUFFER_REFRESH_COMPLETE'.
CALL FUNCTION 'PRICES_CHANGE'
EXPORTING
actual_bdatj = f_matpr-pp-bdatj
actual_poper = f_matpr-pp-poper
bukrs = p_bukrs
budat = p_date
xblnr = p_xblnr
TABLES
t_matpr = t_matpr.
READ TABLE t_matpr WITH KEY pp-xerror = ' '
TRANSPORTING NO FIELDS.
IF sy-subrc <> 0.
MESSAGE i046(ckprch).
ELSE.
CALL FUNCTION 'PRICES_POST'
EXPORTING
i_bktxt = p_bktxt
bukrs = p_bukrs
lis_update = 'X'
TABLES
t_matpr = t_matpr.
ENDIF.
COMMIT WORK.
If you forget the COMMIT-WORK each and every FM called in UPDATE TASK will not be triggered.
Regards,
Raymond -
Office 2013 C2R Update Scheduled Task does not work
Hi all.
I am having difficulty getting network deployed updates to work correctly. I installed and older version of Office 2013 with the ODT from a network share and set the update path. I then downloaded an update via ODT.
The issue is the scheduled task does not update office. If I trigger or manually run from a command prompt "C:\Program Files\Microsoft Office 15\ClientX64\integratedoffice.exe RUNMODE RERUNMODE modetorun updatedetection modeargs reschedulemode tasktrigger
scheduledtask updateuitype background” from Task Scheduler nothing seems to happen. Monitoring Task Manager it looks like integratedoffice is called albeit very briefly.
But, if I run "C:\Program Files\Microsoft Office 15\ClientX64\integratedoffice.exe RUNMODE RERUNMODE modetorun updatedetection background” from a command prompt Office updates, but if I edit the Scheduled Task to above Office does not update if the
task is triggered.
As Office can update if the right command is given it would appear that my config.xml etc is correct. Any ideas on why the Scheduled Task does not work?
Cheers
JakesWhat permissions are set on the location of the updates ? C2R currently needs permissions granted for machine accounts as it runs under that context. This will change at some point that C2R gets updated.
-
Provisioning in OIM Not Triggering
Hello All
I have an OIM/ORM install up and running with a custom role request module installed. I am able to run the role request and put people into groups as it should, but when people are put into the groups, provisioning is not triggered as it should and the group membership is just changed. i am running the 'Evaluate User Policies' scheduled task but it never completes. if I go to the user and edit the account then save it, all the triggering is happening as normal. I am not getting any errors in the log but I am wondering what could be causing this. Has anyone had this issue or know of a way to resolve this? I am running 9.1.0.2 of OIM. Any help you can give would be appreciated.
NickI have an OIM/ORM install up and running with a custom role request module installed. I am able to run the role request and put people into groups as it should, but when people are put into the groups, provisioning is not triggered as it should and the group membership is just changed. i am running the 'Evaluate User Policies' scheduled task but it never completes. if I go to the user and edit the account then save it, all the triggering is happening as normal. I am not getting any errors in the log but I am wondering what could be causing this. Has anyone had this issue or know of a way to resolve this? I am running 9.1.0.2 of OIM. Any help you can give would be appreciated.I have just one Question, which version of ORM you are using ?
Just raise an SR with Oracle because I faced this issue long back and this feature was not supported with ORM 10.1.4.2.
It works with ORM 10.1.4.1 -
BPM TASK IS not visible in UWL Inbox
Hi BPM Expert,
I am facing the big issues in BPM process Triggered problem. earlier i used to BPM start using Web service with Two entity as ID and Username but its was working fine .but i have some requirement to adding one element in Existing WSDL entity as casename , i have added that element and execute the web service using WEBDYNPRO application ,but Task is not visible in UWL inbox but earlier it was working perfectly, after adding that field ,BPm tax is not visible UWL inbox ..
Please guide me ,Its urgent...Plz plz..
Its showing error as
Technical issues is triggered during the process creation..
Thanks
sudhirHi ,
I am executing the WEbservice using WSNAVIGATOR but its not execute , its getting HTML log error as below..
1-Web service returned error. Fault Code: "(http://schemas.xmlsoap.org/soap/envelope/)Server" Fault String: "Could not retrieve SDO HelperContext for service_id nsn.com/claimbpmproject/PRINVOKE"
2-
HTTP/1.1 500 Internal Server Error
server: SAP NetWeaver Application Server 7.20 / AS Java 7.20
content-type: text/xml; charset=utf-8
date: Sat, 26 Nov 2011 11:40:56 GMT
transfer-encoding: chunked
Set-Cookie: <value is hidden>
2e4
<?xml version="1.0" encoding="UTF-8"?><SOAP-ENV:Envelope xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode>SOAP-ENV:Server</faultcode><faultstring>Could not retrieve SDO HelperContext for service_id nsn.com/claimbpmproject/PRINVOKE</faultstring><detail><yq1:com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException xmlns:yq1='http://sap-j2ee-engine/error'>Could not retrieve SDO HelperContext for service_id nsn.com/claimbpmproject/PRINVOKE</yq1:com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException></detail></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
0
Thnaks
Sudhir -
Dear All,
I have to update some table ( Not LTAK or LTAP) and I found the above mentioned user exit.
However, after creating and activating this enhancement , this enhancement is not triggering during the confirmation of the TO.
The description of the component is: User Exit at End of TO Confirmation (in Update Task)
I found from another SDN post that it directly will not get triggered during TO confirmation.But, I want to check what data at the run time system is capturing in this exit, how can I check that ?
I have tried by setting a breakpoint in the FM - CALL FUNCTION IN UPDATE TASK, but ultimately could not fathom anything.
Please help,
Thanks in advance.Hi Brad,
Many many thanks.
After I received your reply, I did a bit of google on Update debugging and learned how to set it on.
After that, I tested and this time the breakpoint triggered.
Thanks again, closing the issue.
N.B. - For switching on debugger in update mode, go to normal debugging mode, then go to settings > Display/Change debugger settings > Update debugging.
Helpful tip for functional consultants like me !!
Maybe you are looking for
-
How can I remove the deviation bars for my measurement data out of the legend. If I add x and y deviations to my data I also get a deviation cross in the legend above the signs (Square, circle etc.).
-
Calculation of consignment stock for a material ( ABAP/MM)
HI, I need information to find out consignment stock as per requirement. I doubt the requirement is not complete enough but they dont agree. I am using following logic.Please provide me your inputs.( i was asked to follow standard program logic of 'R
-
Apple PowerMac G5 Powers up Half way from desktop loading up screen goes
Hi All I have A Apple PowerMac G5, Just given free Powers up, i hear the apple chime, It starts to boot/load up, i can see the round spinning thing, happening, but then just about Half way from desktop loading up, the screen goes blank, I have tried
-
Total Number of Pages with page exception
Hi all, Currently a have a form that requires a page number to start on the second page. I've done this via DAL script #PCOUNT +=1; return(#PCOUNT); The problem now lies in the total number of pages. Is there a way for me to get the total number of p
-
Pathintosh : Need OS X to Stay in 640x480
Some might remember my "Pathintosh" project a few years ago (Mac installed in Nissan Pathfinder)? I'm back... and I'm trying to get my Mac+Pathfinder working with the latest version of OS X. I have a unique need to run OS X in 640x480, but the screen