Idocs are not reaching to midleware or external Vendor

Hi Everyone,
We are sending delivery forecast idocs through a customising transaction, the idoc status is 12 but it does not reached to midleware or external vendor. When we create a new idoc through test tool(WE19) by copying the above idoc(which was created by customising transaction), its reaching midleware and vendor. Could you please tell, whats going wrong with the idocs which were created through customising program/transaction.
Thanks in advance.
Thanks and Regards
Raghu

sorry, no ideas at the moment.
You are using the same IDoc (which is in Status 12) and process it with WE19 and it´s working ?
Go to your IDoc Monitor.
OPen both IDocs and go to the STATUS Information.
Open all Status Data and read through longtext and Details, maybe you can locate it there.

Similar Messages

IDocs are not transfering to XI

Hi,
When we create Shopping cart, in the back PO will create and it woould convert to IDoc and send to XI. But PO's are creating, IDocs are not reaching to XI, please let me know what would be the issue.
Thanks

HI,
Try this URL , i hope it will help u ,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09b775e-e56e-2910-1187-d8eba09c7a4a?quicklink=index&overridelayout=true
Regards,
S.Saravana

Messages are not reaching to Adapter Engine (JMS receiver)

Hi Friends,
We have one scenario running on Production env.
Scenario is: R3(IDOC) -> XI ->JMS Provider
IDOC to JMS.
Sometime we found messsages are successful in SXMB_MONI, but those messages entries are not found under AE.
Means they are not reaching to JMS.
Communication channel is green, without any error.
This happens sometime only, and no changes have been done to JMS adapter parameters.
What might have happen to these messages, which are successful in MONI but not visible under AE.(Even not in Archived option)?
I searched on SDN, but most of the questions are unanswered.
Please let me know your inputs.
Divyesh Vasani

Hi Divyesh,
check under message monitoring in RWB
if u r not finding the message there , those might be archived.
did u confirm with the destination system .. if they got the messages?
if at all messages are stuch in AE ... and if u search the correct message u should be able to see the message.
if the Integration engine unable to put messages in AE , then in some pipeline step in MONI it will show error

E-REC-Job Postings are not reaching to internal career channels

Hi All,
Recruiter Published job postings are not reaching to internal career sites.
Can any one share their experiences on this pls.
We already executed the HCM_ER_Jobpostings as well...but still...!!!
Thanks,
Asha...
Edited by: Sikindar on Jan 24, 2012 9:53 PM

Hi Asha
Re-check the period for which Job Posting is open. The posting may not be valid for the current date.
Also you could test and see if the same is reflecting in another channel (external). Let us know!
Also check link: http://wiki.sdn.sap.com/wiki/display/ERPHCM/Aparticularobjectisnotshownintheresulthitlist
It might help!

Idocs are not processed in the right order.

Hi,
I face a problem that when there are a large number of IDocs (Inbound) posted the Idocs are not processed in the right order.
Msg type: MBGMCR
any idea how this can happen?
what is the solution?
br
Karen

No answer

Outbound Idocs are not generated for some material number MATNR

Hi all,
We are using a custom program to process the IDOCS to some other thirdparty systems.
but the problem is the IDOCS are not generated and also we can't find the IDocs in TRFC also.
But it is working for the other matnr.
I have already debug the custom program, and it is taking all the inputs correctly.
plz guide me guys

Hi Praveen,
This is the code I am using
LOOP AT GS-MATNR_WERKS ASSIGNING <MATNR_WERKS>
GS-COUNT = GS-COUNT + 1.
    GS-TEXT = 'IDOC for Material & & (& of &) is just being created'(001).
    REPLACE '&' WITH <MATNR_WERKS>-MATNR INTO GS-TEXT.
    REPLACE '&' WITH <MATNR_WERKS>-WERKS INTO GS-TEXT.
    REPLACE '&' WITH GS-COUNT            INTO GS-TEXT.
    REPLACE '&' WITH GS-LINES            INTO GS-TEXT.
    CONDENSE GS-TEXT.
    CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
              TEXT = GS-TEXT
validation code for the MATNR & WEKRS
CALL FUNCTION 'Z_MASTERIDOC_DISTRIB_ZCOPEBOM'
         EXPORTING
              MATNR        = <MATNR_WERKS>-MATNR
              WERKS        = <MATNR_WERKS>-WERKS
              MESSAGE_TYPE = P_MESTYP
GS-CREATED = GS-CREATED + 1.
    GS-COMMIT = GS-COMMIT + 1.
    IF GS-COMMIT >= 100.
      GS-COMMIT = 0.
      COMMIT WORK.
    ENDIF

Graphs: columns are not reaching the correct axis data.

I am so frustrated with Illustrator's graphs and charts!
I've watched the Lynda.com videos and created several graphs. But in particular is not working correctly. I've entered the data correctly but the column are not reaching correct Value Axis. For example: one value is 11%, instead of the column reaching just above the 10% tick mark it is below it. This is happening for all the data in the chart.
I have created a column design with the %00 code to display the values above the columns and it seems to be including the height of the text in the column height.
Any suggestions to fix this?
HELP!

Have you already read this: http://help.adobe.com/en_US/illustrator/cs/using/WS3f28b00cc50711d9fc86fa8133b3ce158e-8000 .html#WS714a382cdf7d304e7e07d0100196cbc5f-61a3a
"Create a sliding column design"
The text will be part of the design no matter where the invisible rectangle is located.

Outbound IDocs are not visuible in Middleware system(SeeBeyond)

Hi Experts,
We need need your expertise help on this issue.
Issue:
The Outbound IDocs which are in status 12 in SAP system are not visuible in Middleware system(SeeBeyond) for customized message type( forecast -ZFOSHT)
If we create a IDoc by using customized program, IDoc(eg.0000000012345678) is successfully created and the status of IDoc is 12. but not visible in Seebeyond.
but If we are re sending the same IDoc(0000000012345678) through WE19(IDoc creation) without changing any thing,the newely created IDoc reached to the Seebeyond.
Please look the issue and help me on this.
Raghavendrarao.R
+91 9739006564

Hi,
After your Function module for IDoc creation either it is Z function module or standard one "MASTER_IDOC_DISTRIBUTE" write these
CALL FUNCTION 'DB_COMMIT'.
CALL FUNCTION 'DEQUEUE_ALL'.
COMMIT WORK.
This should solve your problem.

Vendor IDOCs are not uploading in LFA1 table

Hi All,
We have a SAP system where Vendor IDOCS are coming from MDM through SAP PI middleware. The problem we are facing is we are not able to see all Vendors in LFA1 table.
In WE05 IDOCS are posting successfully but when we check for respective vendors in LFA1 table only few vendors are available there.
Can anybody guide us to solve this issue? Also pls let us know the process of uploading master data into table as we are very new in ABAP.
Regards,
Sarita

be open minded. SAP gives several import methods to load vendors. one of them is per IDOC.
But the vendor master IDOC does not automatically create the adress master.
And even more important, if you migrate data from one SAP system to another, the IDOC method is more straight forward than the batch input, because you can send the IDOCs from legacy system to new system, you will then have a 1:1 relation of the structure in LSMW and you can create vendor masters by knowing the new vendor number from an internal number range already in LSMW, long before you actually post the vendor. With batch input you can either post with numbers from external number range, or you just dont know the new number already in LSMW.
And you dont need to download the data to Excel. And further, the LFA1 adress data has less information than the ADRC adress data.

Some of the error idocs are not falling into Workflow Inbox

The extract of IDOC list with status 51 from WE02 transaction is not matching with Workflow inbox column "object", some of the idocs which are errored are not showing in the workflow inbox. Here we are in need to get all the errored idocs into the inbox. Please suggest me to proceed further.

Hi Smita,
Thanks for your reply.
I have maintained the suggested role SAP_GRC_SPC_SCHEDULER in backend for an user id and i can able to see a job is getting completed in SM37.
However, the task in the inbox hasnt come yet.Any idea you may have as to how much time it will take for task to come into inbox.Or is that i need to do any more extra task.
Please advice.
Thanks
Ashok S

Sent mails from CRM are not reaching to destination..

Hi experts, good afternoon.
I have configured an action to trigger an email when the document is saved. But the problem is action is shown as executed in transaction level, even in SCOT it is showing as completed but in SOST sent mails it is not shown and it is not reaching to my mail inbox also.
Please help me out in this regard. Please let me know what could be the problem.
Regards
Madhav

Hi Maddy,
I am facing the same issue. I was not able to see any of my entries in SOST. I went to the tab 'send status' in SOST and and clicked on the button 'Further' and selected 'Still Not Entered in Queue'. Now I can see it in SOST with status 'Still no entry in queue'.
Are you also facing the same problem? When you find the solution, please let me know.
Regards,
Neena

IDoc segment not reaching XI

Hi,
I have a peculiar problem where the values populated in an IDoc segment are not coming to XI, though the values are visible in the sender SAP system, they are not present in the IDoc XML generated in XI.
Please help if someone faced a similar problem.
Thanks
Pushpinder

Hi,
Check if problems are raised on Cache of Design side of your IB.
Environment - Cache Status Overview
Then "Clear Data Cache".
And try again.
Regards,
Giuseppe

IDOC is not reaching SAP from XI

Hi all,
The IDOC that I'm sending from XI is not reaching SAP.
I have tried all most all possibilies. In SXMB_MONI I'm able to see the IDOC gets created successfully (with no error).
I have re-checked the partner profile, SMQ1, Config etc.
Please help me to debug.
Thanks,
AJ.

AJ,
Check if you have a chequered flag on both sides of your message ibn SXMB_MONI?
Check the log of your TRFC in transaction SM58
gards,
Bhavesh
Message was edited by: Bhavesh Kantilal

Inbound Idocs are not Processing

Hi,
Inbound IDOCS queue is not processing if any one IDOC is showing amber(error) . Please let me know the resolution to avoid this issue or let me know the BASIS setting to avoid it.
Regards,
PVK.

Hello,
Can you please explain your issue is with "Trigger by Background program" or "Trigger immediately"?
For Trigger immediately, if there is no free dialog work process available than IDocs are posted with status 64.
For Trigger by Background program, Background job RBDAPP01 will process IDocs depending on variant you define to select & process IDocs(i.e., IDoc Status = 64).
It is always recommended to use "Trigger by Background program" for high volume interface which has large number of IDocs.
Help on RBDAPP01
Regards,
Sameer

Why IDocs are not arrived from Source System

Hi all,
Now a days we are facing regular problem to load master data?
We are getting Error Message - "No Idocs arrived from the Source system".
I need to know, Why this error will be occurred?
Is there any reason for this Docs are not arrived from the Source System?
Please help me to analyze this error, why its happened regularly? what could be possible reasons for this error?
Its very urgent, please help me as early as possible.
Thanks in Advance. I will asign the points for relevent answers.
Regards,
Sudharsan Reddy.

Hi ,
SOME OF THE CHECKS:
1.You can check the RFC destination using the transaction SM59 in the system. Then do Test connection and this should not cross more than 1000ms. The connection should establish within 1000ms.
If it crosses more than 1000ms the tRFC entries will not be cleared fast.There will not be any job to push Transaction recorded entries it will go through SMD(Shared Master Data) Tool.
So if it crossed more than 1000ms, then you can ask your Basis team to check the network connectivity b/w R/3 and BW system.
If there is no serialization for these IDocs then you can use button F6 to process these entries in tRFC manually.
2.Go to SM58 and check the LUW .If any error ..then selecting the failed Idoc, click edit in the menu and execute LUW.
3.If there are many Idocs with status red then check the system performance also. If performance os the system is bad then, we can put the mail to basis guys they will check and restart the BW system. (or) it may be due to problem in the coding,since data transfer is taking long time.
4. Some times it may be due to much parallel process at the info package level and make the Max parallel process into one process in RSCUSTV6, save and run the infopackage. This may be due to space problem.
( Or )sbiw>general settings>maintain control parameters for data transfer. Both in BW and R/3 we configure in the same way.
There we need to give
1.source Sys name
2.Maximum KB in one data package.
3.Maximum lines in one data package.
4. Frequency (specifies after how many no. of data records, status record should be sent)
5. Max processes ---Reduce the number process, save and try.
6.Target Sys name.
Regards,
Dhanya.

Idocs are not reaching to midleware or external Vendor

Similar Messages

Maybe you are looking for