Idocs are not received in Destination side.
Hi Friends,
I have a small doubt regarding SM58.
I have 2 dev systems.
client 100 & 200 we are send the Material data from 100 to 200.
In 100 system all are fine and the status is 12 and green but those are not received in 200.
When we check in 200 all the IDOCs are strucked in SM58(TRFC queue).
Please suggest me?
Regards,
Venkat.
Hi,
Please check the system RFC connection in WE21 and resend.
Regards,
Nandha
Similar Messages
-
Delivery reports are not received to MMS which are...
Hi,
I am currently using a nokia supernova 7210 handset & I am able to send & receive MMs without any problems .
but the delivery reports are not received by the senders for the MMs which are sent to me.
In MMS settings , I have configured to retrieve incoming MMS messages.
The delivery reports are received by the senders if retrieve MMs manually.
Please let me know if anyone knows the answer for this.
thanks.DB version :
SQL> select * from v$version;
BANNER
Oracle7 Server Release 7.3.4.3.0 - Production
PL/SQL Release 2.3.4.3.0 - Production
CORE Version 3.5.4.0.0 - Production
TNS for IBM/AIX RISC System/6000: Version 2.3.4.0.0 - Production
NLSRTL Version 3.2.4.0.0 - Production
Alert log :
SID>tail -f alert_SID.log
Tue Sep 25 14:35:03 2012
Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
Tue Sep 25 14:35:03 2012
Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
Tue Sep 25 14:35:03 2012
Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
Tue Sep 25 15:09:18 2012
create tablespace tbs datafile '/stage/software/APRD/oradata/tbsnew.dbf' size 10 0m
Tue Sep 25 15:09:27 2012
Completed: create tablespace tbs datafile '/stage/software/AP...
Trace file :
SID>tail -f ora_84426_aprd.trc
on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
Entire contents of block is zero - block never written
Reread of block=2101d366 file=33. blocknum=119654. found same corupted data
table scan: segment: file# 15 block# 84
skipping corrupt block file# 33 block# 119654
Corrupt block dba: 0x2101d367 file=33. blocknum=119655. found during buffer read
on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
Entire contents of block is zero - block never written
Reread of block=2101d367 file=33. blocknum=119655. found same corupted
For this above :
SQL> select segment_type,owner,segment_name from dba_extents where file_id=33 and 119654 between block_id and block_id+blocks -1;
SEGMENT_TYPE OWNER
SEGMENT_NAME
TABLE GL
GL_JE_LINES
Regards
Hamid -
Windows users are not receiving attachments sent out of Mail
I am a consultant. I use Mail in Snow Leopard. Software is up to date.
Our business uses Microsoft Exchange Server 2003. All other consultants in the company are using Windows. In Mail I connect via IMAP. It has worked flawlessly until recently.
Recently, my corporate clients (various clients not related to one another nor using the same email server) have complained that they are not receiving my email attachments. It is not universal. It is inconsistent, even with the same client. Sometimes the attachments are there and sometimes not.
I have verified two things. 1) That the attachments are present in the emails in my outbox. 2) That the emails leave our server with the attachment (I accomplished this by contacting our Microsoft Exchange service provider and giving them examples, which they tracked down and verified that the emails left them with the attachments.).
Our service provider suggested that Mail is adding something to the email that is causing Outlook (the common denominator is that the clients receiving the emails are all on Outlook) to strip the attachment. Or, the antivirus is stripping it. Something about the Mail email is causing Outlook or some antivirus software to strip the attachments.
Has anyone else encountered this? Is there something that can be done?
Right now I've had to go to Thunderbird in order for my attachments to be received. I'd rather stay with Mac all the way, but I cannot trust that my clients will receive attachments.
I'm hoping that when our company changes to MS Exchange Server 2007, that the problem will go away, since Mail can interface with the 2007 version directly. But, until then, I would really like to stick with Mail, if I can find a work around.
Thanks.
MattI am now having exactly the same problem. But here is a new wrinkle. ALL the persons having the problem you describe - that attachments are stripped off - are using cox.net as their e-mail provider. I am not saying that all cox.net mail users are having the problem, but those having the problem are among the cox.net e-mail users. None of my recipients using aol.com, yahoo.com, gmail.com, verizon.net, zona.net, etc. are having any problems. Only some of the cox.net e-mail users.
I suspect but have not checked that they are all PC users (I use a Mac with Mail) and, now that I have become aware of this thread, I will check if they use Outlook.
It started a few months ago. I had no problems before and now this, with the same people. Obviously something must have changed but what?
Please let me know if you have found anything more about this - or even a solution? :-) -
IDocs are not transfering to XI
Hi,
When we create Shopping cart, in the back PO will create and it woould convert to IDoc and send to XI. But PO's are creating, IDocs are not reaching to XI, please let me know what would be the issue.
ThanksHI,
Try this URL , i hope it will help u ,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09b775e-e56e-2910-1187-d8eba09c7a4a?quicklink=index&overridelayout=true
Regards,
S.Saravana -
Dears,
We have recently implemented MS EPM 2013 where we started to face some strange behavior with the standard alerts and reminders sent from the system.
Minor number of the users (with different levels of privileges from administrators to team members) are receiving emails and alerts normally (either when they are assigned on project schedule tasks or SharePoint list items alerts) without any issues however
the. on the other hand the other majority number of resources are not receiving any kind of alerts from the system (neither from Project Server Nor from SharePoint).
knowing that, all the resources/users have their emails configured properly, and their other attributes are almost the same for all users. all the emails are stored on the same exchange server.
Anyone can help on this please.
Appreciate your cooperation.
Ibrahim Al-Masri Technology Manager at MethodCorpThanks Dinesh,
Actually the users have this global permissions configured for them and yet they weren't receiving emails.
We Just could solve this puzzle, all what we needed to do is to configure the
RBS for the majority for the users who weren't receiving emails.
Welcome to EPM 2013 UN-unannounced changes.
Ibrahim Al-Masri Technology Manager at MethodCorp -
Vlans dhcp status are not received
Hello,
I am configuring vlan on sg300-20 in dhcp mode.
One vlan that is directed connected to the adsl router get ip address and when I connect host to the ports in this vlan they also receive ip address and can go on internet.
The other four vlans dhcp status are not received.
Kindly help me check this. Thanks
Below is the config log:
switch4ba497#sh running-config
config-file-header
switch4ba497
v1.2.9.44 / R750_NIK_1_2_584_002
CLI v1.0
file SSD indicator encrypted
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
vlan database
vlan 5,10,20,30,40
exit
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
ip dhcp relay address 192.168.3.1
ip dhcp information option
no boot host auto-config
bonjour interface range vlan 1
hostname switch4ba497
line telnet
exec-timeout 0
exit
no passwords complexity enable
username cisco password encrypted 7af78c911d5b48bea1dc2449d9d89513abeb4be5 privilege
15
ip http timeout-policy 0 http-only
ip name-server 192.168.1.1 192.168.3.1
ip telnet server
interface vlan 1
ip address 192.168.2.254 255.255.255.0
no ip address dhcp
interface vlan 5
name WAN
ip address dhcp
interface vlan 10
name Studio
ip address dhcp
interface vlan 20
name Service
ip address dhcp
interface vlan 30
name Admin
ip address dhcp
interface vlan 40
name Data
ip address dhcp
interface gigabitethernet1
switchport mode access
interface gigabitethernet2
switchport mode access
switchport access vlan 10
interface gigabitethernet3
switchport mode access
switchport access vlan 10
interface gigabitethernet4
switchport mode access
switchport access vlan 10
interface gigabitethernet5
switchport mode access
switchport access vlan 10
interface gigabitethernet6
switchport mode access
switchport access vlan 10
interface gigabitethernet7
switchport mode access
switchport access vlan 10
interface gigabitethernet8
switchport mode access
interface gigabitethernet9
switchport mode access
switchport access vlan 20
interface gigabitethernet10
switchport mode access
switchport access vlan 20
interface gigabitethernet11
switchport mode access
switchport access vlan 20
interface gigabitethernet12
switchport mode access
switchport access vlan 20
interface gigabitethernet13
switchport mode access
switchport access vlan 30
interface gigabitethernet14
switchport mode access
switchport access vlan 30
interface gigabitethernet15
switchport mode access
switchport access vlan 30
interface gigabitethernet16
switchport mode access
switchport access vlan 30
interface gigabitethernet17
switchport mode access
interface gigabitethernet18
switchport trunk native vlan 40
interface gigabitethernet19
switchport mode access
switchport access vlan 5
interface gigabitethernet20
switchport trunk native vlan 5
switch4ba497#sh ip int
IP Address I/F Type Directed Precedence Status
Broadcast
0.0.0.0/32 vlan 10 DHCP disable No Not
received
0.0.0.0/32 vlan 20 DHCP disable No Not
received
0.0.0.0/32 vlan 30 DHCP disable No Not
received
0.0.0.0/32 vlan 40 DHCP disable No Not
received
192.168.2.254/24 vlan 1 Static disable No Valid
192.168.3.102/24 vlan 5 DHCP disable No Valid
switch4ba497#
Also i do not understand why the ip address is 0.0.0.0/32 because the dhcp server ip address is 192.168.3.1Dear Customer,
Thank you for reaching Small Business Support Community.
In Layer 2 system mode, only the management VLAN can be configured with a static or dynamic IP address. In Layer 3 system mode, all the interface types (ports,LAGs, and/or VLANs) on the device can be configured with a static or dynamic IP. Configuring the device to work in either mode is performed in the Administration >System Settings page
When a DCHP Client starts a discovery process, it assigns a dummy IP address 0.0.0.0 before the real address is obtained. This dummy address has the status of “Not Received”.
Pretty much your problem should be solved by changing to Layer3 system mode. Please let me know if anything comes up and/or if there is any further assistance I may help you with.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found. -
Dhcp status are not received on sg300-20
Hello,
I am configuring vlan on sg300-20 in dhcp mode.
One vlan (5) that is directed connected to the adsl router get ip address and when I connect host to the ports in this vlan they also receive ip address and can go on internet.
The other four vlans dhcp status are not received
Kindly help me check this. Thanks
switch4ba497#sh running-config
config-file-header
switch4ba497
v1.2.9.44 / R750_NIK_1_2_584_002
CLI v1.0
file SSD indicator encrypted
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
vlan database
vlan 5,10,20,30,40
exit
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
ip dhcp relay address 192.168.3.1
ip dhcp information option
no boot host auto-config
bonjour interface range vlan 1
hostname switch4ba497
line telnet
exec-timeout 0
exit
no passwords complexity enable
username cisco password encrypted 7af78c911d5b48bea1dc2449d9d89513abeb4be5 privilege
15
ip http timeout-policy 0 http-only
ip name-server 192.168.1.1 192.168.3.1
ip telnet server
interface vlan 1
ip address 192.168.2.254 255.255.255.0
no ip address dhcp
interface vlan 5
name WAN
ip address dhcp
interface vlan 10
name Studio
ip address dhcp
interface vlan 20
name Service
ip address dhcp
interface vlan 30
name Admin
ip address dhcp
interface vlan 40
name Data
ip address dhcp
interface gigabitethernet1
switchport mode access
interface gigabitethernet2
switchport mode access
switchport access vlan 10
interface gigabitethernet3
switchport mode access
switchport access vlan 10
interface gigabitethernet4
switchport mode access
switchport access vlan 10
interface gigabitethernet5
switchport mode access
switchport access vlan 10
interface gigabitethernet6
switchport mode access
switchport access vlan 10
interface gigabitethernet7
switchport mode access
switchport access vlan 10
interface gigabitethernet8
switchport mode access
interface gigabitethernet9
switchport mode access
switchport access vlan 20
interface gigabitethernet10
switchport mode access
switchport access vlan 20
interface gigabitethernet11
switchport mode access
switchport access vlan 20
interface gigabitethernet12
switchport mode access
switchport access vlan 20
interface gigabitethernet13
switchport mode access
switchport access vlan 30
interface gigabitethernet14
switchport mode access
switchport access vlan 30
interface gigabitethernet15
switchport mode access
switchport access vlan 30
interface gigabitethernet16
switchport mode access
switchport access vlan 30
interface gigabitethernet17
switchport mode access
interface gigabitethernet18
switchport trunk native vlan 40
interface gigabitethernet19
switchport mode access
switchport access vlan 5
interface gigabitethernet20
switchport trunk native vlan 5
switch4ba497#sh ip int
IP Address I/F Type Directed Precedence Status
Broadcast
0.0.0.0/32 vlan 10 DHCP disable No Not
received
0.0.0.0/32 vlan 20 DHCP disable No Not
received
0.0.0.0/32 vlan 30 DHCP disable No Not
received
0.0.0.0/32 vlan 40 DHCP disable No Not
received
192.168.2.254/24 vlan 1 Static disable No Valid
192.168.3.102/24 vlan 5 DHCP disable No Valid
switch4ba497#
I also do not understand why the ip address is 0.0.0.0/32.
Becuase the dhcp address 192.168.3.1/24
Thanks.Hello Tom,
Yes i can feel you taking me toward the solution.
Actually I have an ADSL router that has DHCP capability and my vlan interfaces are to receive ip address from it.
The adsl router Ip address is 192.168.3.1
Vlan 5 WAN which is directly connected to the adsl router get Ip address while the other vlan do not.
When I assign port from other vlan to vlan 5 and I attach host to the port they get ip address and go on internet. The strange thing is that the other vlan do not get ip address. Thanks. -
I recenly changed device from BB Curve 8530 to BB Bold 9900 and ever since then can't accept BBM invitations and Invites sent shows only as "Pending for Authorization" but recipients are not receiving them either. Tried sending PIN messages but I got a red x next to the message and the status says: "Service Blocked" .
When my phone got lost, I was lucky that I just synchronized my device to my BB Desktop. Not only was I able to retrieve my contacts (phonebooks and BBM) but also ALL txt msgs and even call logs
Anway, that happening, I assumed I don't need to re-send all my BBM friends invites since some were able to communicate with me. But for those who have deleted my profile (knowing it got lost) and were still on my contact were the ones affected. I tried deleting them and sent an invite only to find out that: I can't accept BBM invitations and Invites sent shows as "Pending for Authorization" but recipients are not receiving any. (they also have the same pending for authorization notice on their end)
When I tried to send them a PIN message I get a red x next to the message nd get the service blocked message.
Help I do not know what else to do.
** FYI: new contacts added with my new PIN have no prob sending invites and me accepting them all.Hello Lhea,
This issue is most likely Caused by the BlackBerry not being provisioned for BlackBerry Data Services.
Please have a look at the following article that covers "Service Blocked" when sending a PIN message:
http://btsc.webapps.blackberry.com/btsc/KB19244
I hope this helps.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Documents I forward are not received under the original document name. How do I solve this?
If you're referring to the name of the attatchment showing when viewing the entire email, that's there's no way to change how it's done. The title and body of the actual document is unchanged after it's opened.
Does this naming of the attachment really confuse the recipient? If so, put something in the body of the email to make it clear what's attached. -
Some clients are not receiving my mail attachments.
Some clients are not receiving my mail attachments. Other recipients of the same email DO receive these attachments. It doesn't matter whether it is a jpg, pdf, doc, or other. Sending from gmail or entourage works, only sending from apple mail is a problem. This has been an ongoing problem for me in Lion and Snow Leopard. I'm new to this forum, so not sure I'm posting in the right area, but I've searched for an answer and can't find anything. Do I need a plug-in or something? I like my apple mail and don't want to switch, but this is a real problem for me. Help, please!
We have the same problem in Snow Leopard, so the problem isn't new. I've been researching this for a while now. Based on what I've read in a whole load of discussions it seems it's an issue in the way Outlook reads the e-mails send by Apple Mail. I've no idea of the technicalities of this but one obvious difference is that Mail's default formatting is Rich Text and Outlook's is HTML, but what do I know.
We've done variuos test with our PC based clients but with no success: Send as Icon; Window's friendly attachement; Mail Attachement Iconiser, etc. Nothing gets rid of the problem entirely. We're a Mac based Public Relations agency and we send image to the media all of the time...and we have no guarantees that they are getting through.
It's frustrating that Mail doesn't have an option, as it does for plain text, to send in an outlook friendly way. To me it's a huge problem and if Apple isn't going to sort it, given that Outlook is the choice of Enterprise and 95% of our clients, then we're going to have to spend thousands and switch to Outlook. Apple have gone to great pains to promote cross-compatibility with PC's and perhaps this is one little example of where they could try harder.
Mail has not had much obvious love and attention for a while and if there's an Apple employee looking in on this thread, perhaps it's time to love it up, give it a few more bells and whistles (without over-complicating of course) and make it sing with Outlook.
My last attenpt is to try Thunderbird as a default mail client; I'm told it doesn't suffer from the same PC compatibility issues. -
Idocs are not processed in the right order.
Hi,
I face a problem that when there are a large number of IDocs (Inbound) posted the Idocs are not processed in the right order.
Msg type: MBGMCR
any idea how this can happen?
what is the solution?
br
KarenNo answer
-
Outbound Idocs are not generated for some material number MATNR
Hi all,
We are using a custom program to process the IDOCS to some other thirdparty systems.
but the problem is the IDOCS are not generated and also we can't find the IDocs in TRFC also.
But it is working for the other matnr.
I have already debug the custom program, and it is taking all the inputs correctly.
plz guide me guysHi Praveen,
This is the code I am using
LOOP AT GS-MATNR_WERKS ASSIGNING <MATNR_WERKS>
GS-COUNT = GS-COUNT + 1.
GS-TEXT = 'IDOC for Material & & (& of &) is just being created'(001).
REPLACE '&' WITH <MATNR_WERKS>-MATNR INTO GS-TEXT.
REPLACE '&' WITH <MATNR_WERKS>-WERKS INTO GS-TEXT.
REPLACE '&' WITH GS-COUNT INTO GS-TEXT.
REPLACE '&' WITH GS-LINES INTO GS-TEXT.
CONDENSE GS-TEXT.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
TEXT = GS-TEXT
validation code for the MATNR & WEKRS
CALL FUNCTION 'Z_MASTERIDOC_DISTRIB_ZCOPEBOM'
EXPORTING
MATNR = <MATNR_WERKS>-MATNR
WERKS = <MATNR_WERKS>-WERKS
MESSAGE_TYPE = P_MESTYP
GS-CREATED = GS-CREATED + 1.
GS-COMMIT = GS-COMMIT + 1.
IF GS-COMMIT >= 100.
GS-COMMIT = 0.
COMMIT WORK.
ENDIF -
HT2736 recipients are not receiving gifted music
I've gifted music, but they are not receiving it?
Do the recipients have access to the folios?
-
Just got the Samsung Galaxy s5 and am very frustrated that I am not receiving text messages that were supposedly sent to me. Also, it says 'sent' but it is never delivered. Or it might get delivered but mine still just shows being sent. I re-started that phone and disabled my texting on my old iphone as some have suggested. I'm ready to go back to the iphone just because of this issue. Please fix this Verizon!
I'll tell you it is some marketing coup that a problem Apple has created and has control over is being passed off on Verizon.
This problem is the result of you migrating from iMessage, a messaging platform controlled completely by Apple, back to a more mainstream messaging system of SMS/MMS. Verizon has no control over other iPhones "thinking" you are still using iMessage. NOTHING Verizon can do will fix this problem.
Try texting the word "stop" to 48369. Others have reported this has worked. Doing this should de-register your number with the iMessage system. You should receive a confirmation reply. It may take a day or 2 for other iPhones to completely register that your number is no longer associated with iMessage. You can also try calling Apple support and let them know you are not receiving messages from iPhone users after switching to an android phone from an iPhone. -
All my BBM contacts are not receiving my broadcast messages
is there a message limit on the torch , i have 1500 contacts and alot of my contacs say tthey are not receiving the broadcast
In the past the limit was 1,000 contacts, and that was increased when BBM was upgraded to v 5.0.0.57, however that relates to the number of contacts in the Messenger.
I have a feeling that you sending 1500 broadcast messages is too many at one time. If I were you, I'd create contact Groups A, B, C, etc., maybe 500 in each and send less at a one time.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
BB Bold 9650 - DM Runtime Error "Cannot Find System in Table File"
I am new to these forums and have read as much as I understand without seeing a fix. I recently traded in my BB World Edition (loved it) for the Bold 9650. I uninstalled the old DM I was using and installed DM 6.0 - couldn't sync. Unistalled that and
-
File opening multiple times in a book
Hello. Something has gone crazy in indesign for me. Not sure if its the recent update. In osx if you open a book and double clikc one of the files, it opens, if you double click it again, it opens another copy, changes made in one reflect in the othe
-
IDVD 08 crashes right before burning
I installed this overtop of iDVD5, and ever since, I haven't been able to make a DVD. As it is encoding, the program abruptly turns off, no error messages, nothing. I've read some other threads about this, and I have plenty of hard drive space, I tri
-
100% cpu usage due to nio selector.open
Hello guys, I am developing a multiplayer game using nio.In the begging i read all document related to nio.I have never heared about this api uses 100% cpu at server side as well as client side. When i start my server which is non blocking the cpu us
-
Project Systems - Inter company stock transport orders
We are implementing SAP Project Systems module for our client as part of ECC 6.0 global roll out and we are looking for a solution to meet the with following business scenario: The sales company (CC : US01) receives a purchase order for large projec