Idocs are unable to transfer from R3 to PI system, IDOC status is 03

Hello Gurus,
Idocs are unable to transfer from R3 to PI system, IDOC status is 03
in sm58 getting below error
RFC  are working fine
"EDISDEF: Port SAPCEP segment defn Z2SH_DESCR000 in IDoc type MATMAS03 CIM"
Regrds
vamsi

Hi,
I am also facing same problem, Can any one suggest me what is the issue..

Similar Messages

  • We are trying to transfer files from PS Elements 13 to our web builder.  We are getting a '?' in the top left hand corners of some of the image boxes. It seems that we are unable to transfer images with this ? on the image.  We have spent a long time taki

    We are trying to 'reconnect' files.  we seem incapable to do so, for some reason.  Try as we might, we aren't able to do it.  can anyone help?

    Please see other thread
    Re: We are trying to transfer files from PS Elements 13 to our web builder.  We are getting a '?' in the top left hand corners of some of the image boxes. It seems that we are unable to transfer images with this ? on the image.  We have spent a long time

  • Users are unable to print from Adobe Reader X

    Hi,
    Multiple users in our environment report that they are unable to print from Adobe Reader X. They receive the following error messages (translated from Dutch) Document cannot be printed. There are no pages selected.
    We are using Reader version 10.1.3
    What we have tried to resolve the issue (without any positive results):
    - Repair the installation of Adobe Reader.
    - Update Adobe Reader to the latest version for Vista (x86) (10.1.7)
    - Created new user profile for the affected users.
    The documents can be printed without any errors from Foxit Reader.
    At the moment we use the following workaround:
    Open the document in Internet Explorer, and then print the document from there.
    Does anyone have any idea how we can resolve this?
    Best regards,
    Duncan

    James,
    I'm sorry to hear that you were having the same problem under 9.5.  I had recently updated to Adobe Reader 10 under Windows 7 and yesterday my "default printer" simply disappeared from the options on my control panel.  I re-installed my printer, but today whenever I would open a PDF document and try to print it, the document would simply close with no further ado.  After a bit of trial and error, I ended up uninstalling Adobe Reader 10 and going back to Adobe Reader 9.5.  Now everything is working just fine. 
    nlncmjd

  • Error in RBDMIDOC report run in E-REC, for data transfer from HR to EREC system

    Hi,
    We are on EHP5, EREC 605, SP0007. EREC is on a standalone, separate instance. HR in a separate instance.
    We have created new org.units & positions, which we are trying to move from HR to EREC system for starting the EREC process.
    In the report message type, gave input "HRMD_ABA", The output throws this error. (Screenshot attached)
    Please provide your helps on the reasons for the error and corrective action to be taken.
    Regards,
    ER.

    Thank Nicole for the reply.
    Just extending my query,
    I have  created newly 2 org.units & 2 positions under the org.units in HR system.I
    If i want to create a requisition as a recruiter from EREC portal,  for that newly created vacant positions, what needs to be done?
    How  to move that new vacant org.unit with position to EREC system ?
    Should I run the org.unit with positions using PFAL (Insert/update mode) or use RBDMIDOC method ?
    Look for inputs.
    Regards,
    ER.

  • BI  IDOC type ZSBS042  is not the same as source system idoc type ZSBM023.

    Hi  Evrybody,
    I got an error when trying to initialize the delta load.
    Error Message :
    BI  IDOC type ZSBS042  is not the same as source system idoc type ZSBM023.
    Thanks for  the promt responses
    Regards,
    Zakir SM

    Hi ,
    I checked the IDOC with status 51.. I have this message
    " No status record was passed to ALE by the application ".
    what to do now...
    Rgds,
    Zakir

  • Purchase Order Data transfer from one old sap system to new sap system

    hi all,
    Suppose i have created some purchase orders in one client( old sytem) that are accurate according to our need .
    Now instead of creating same purchase orders again in in new system is a useless task.
    SO i want to upload these purchase order directly from SAP old system to
    SAP new system.
    How to execute this task.
    CAN anybody help me out with simple example  plz..
    thnx & rgds

    using ALE & IDOCS you can trasfer data from one system to another

  • Reg: IDoc is u0091pushedu0092 into SAP from the external EDI system

    Iam facing one issue in our system for message type DESADV (inbound). please read through .
    "When an IDoc is pushed in from the external EDI system & even though the inbound Partner Profile is set to immediate processing mode:
    The IDoc stays in status 64 - 'IDoc ready to be transferred to application'. This assumes that the IDoc has not been processed yet and still needs to be processed with program RBDAPP01 (or via the “process” button in BD87).
    We don't want to again run this program "RBDAPP01". What was the problem.
    I appreciate ur help.

    Hi Krishna,
    In some other scenarios if an IDocs remains in status 64, it means that the processing within the IDoc engines did not reach its end, where the new status could be set. There are two principal reasons:
    1. In the matching partner profile the processing is not set to "Trigger immediately"
    2. The application that processes the IDoc abnormally ends with a fatal error (crashes). If this happened you will see a trace in the system log (ST22). In this case have the satellite system write the file to disk but you trigger the EDI_DATA_INCOMING. Then start EDI_DATA_INCOMING from SE37 manually and debug yourself through the individual steps. A good start would be to set a break-point in the application handling function (in your case: IDOC_INPUT_DESADV ).
    If useful do reward.
    Regards,
    Adarsh Srivastava

  • Data Transfer from 4.7 version system to 6.0 version system

    Hello Experts ,
        We have our FICO system is on 4.7 version. But our HR System is on 6.0 version. FICO (4.7) system is old one with all data. And HR (6.0) is being newly implemented....
       We need some data from FI (4.7) system to HR (6.0) . In future if any changes happens in FI (4.7) system the same changes need to be done in HR (6.0) system too . For ex : If currency of particular country changed..Then as FI is imp we will make that chnage in FI box..We want to reflect the same change in HR box as well.....
      We found 2 ways for this :
    !) doing manually
    2) Doing either by transporting or using ALE /IDoc method
    We want to investigate ways to perform the same using 2 way as this is very simple. But we have doubts here... As HR is on 6.0 and FI is on 4.7 .....  Can we transport data using transports ??? (between2 different versions /??) 
    If transports are not done , then we do that using ALE/ IDocs? using IDoc's we gerenally send transctional data... This configuration settings comes under master data ... can we send this master data using ALE/ IDoc or LSMW..If yes suggest us the msg types ...or other needed info,.
    Thanks in advance. Reward points are garunteed...

    Hello Sampath,
    Yes, distribution of master data via ALE should be OK between these two systems, no problems whatsoever.
    You can use message type COSMAS to distribute cost centres for example which is necessary and is most common change scenario for both HR and FI systems. For all other message types see list of Message Types under transaction (Area Menu) WEDI.
    I think ALE should be the correct approach given your scenario.
    Hope this helps,
    Cheers,
    Sougata.

  • I'm unable to transfer iTunes Playlist to Sonos system.

    I am unable to transfer an iTunes Playlist to my new SONOS system. The SONOS website gives instructions, but they don't work. Anybody having a similar issue?
    Thanks,

    Suresh14 wrote:
    I wonder if I would loose my data (i.e., can't restore the data into my new phone), if I follow the uninstalling & re-installing steps.
    Uninstalling & Re-installing iTunes will not delete your iTunes Library Data.
    Do the following:
    Uninstall from Windows the following four programs: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support. You do this from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
    Download the latest version of iTunes from Apple and note the location you're saving it to so you can find it once it's done.
    Run the iTunes installation as an administrator, just Right click iTunes installer and Run as Administrator.

  • HT4889 Migration Assistant unable to transfer from OS 10.4.11 to Mountain Lion

    I am following the instructions here
    How to use Migration Assistant to transfer files from another Mac
    http://support.apple.com/kb/HT4889?viewlocale=en_US&locale=en_USto migrate from OS 10.4.11 to Mountain Lion, but Migration Assistant gets stuck looking for my old computer. This occurs after I select "From a Time Machine backup or other disk". 
    My old computer is in Target Disk mode and visible in the new Macbook's Finder, so the Firewire cable is OK.
    I also tried migrating from a 120 GB hard-drive backup through the USB port. Still no luck.
    I am running Tiger on my old Powerbook G4, and Mountain Lion on a MacBook Pro.
    Any ideas?
    Any good guides to transferring the files manually?
    Thanks
    Seth

    It is not a good idea to wholesale restore your entire home directory from Tiger to Mountain Lion. If Migration Assistant had worked, you would have a nightmare on your hands with incompatibilities in the home library folder.
    Here is what I would do:
    Use Target Disk Mode to mount the old Tiger Mac on the new Mountain Lion Machine installation.
    Ensure that the original files have the same user id and group ownership between both machines.
    Get the Tiger home directory files to the ML home directory
    Do not drag and drop folders from Tiger, that already exist on ML. Drag the contents between folders. The reason is that folders created by ML, may have different permissions and lower level access control list settings than their Tiger counterparts.
    Do not move the contents of the home Library folder on Tiger at all. You are asking for mayhem if you splatter this over its counterpart on ML.
    You can drag and drop any folders that you created on the Tiger home directory to your new home directory on ML.
    Do not drag any Tiger applications to the new Mountain Lion installation. They are incompatible, and you need current revisions with confirmed ML support.
    Unmount Firewire Target disk mode.
    Start using ML.

  • Excel files are locked since transfer from pc to mac

    I just transferred my excel files from pc to mac and now i can't open them, it says they are "locked for editing" by user (i did not lock them) i can only open as read only.  Is there a fix for this problem? Anyone else had this problem?

    Where are these files saved??
    Maybe this will help...
    I found this post on a different web site - http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macexcel/office-files -locked-for-editing-in-mixed/d838b0d7-6b26-4206-b310-029c73cf0ba6.
    This problem is caused by a temporary file that was not deleted after a previous edit session was completed. The file is hidden and not normally visible through the Finder. The easiest way to view hidden files is to install the hidden files dashboard widget which is available here:
    http://www.apple.com/downloads/dashboard/developer/hiddenfiles_matthansen.html.
    Use the widget to show hidden files then use Finder to open the folder that contains the spreadsheet you wish to edit. If your spreadsheet is named abc.xlsx, you will also see a file named ~$abc.xlsx. Delete the file that begins with ~$ and you will be good to go.

  • Data transfer from EBP to external systems

    Hello everyone....am in a tizzy regarding BAPI's and IDOC's.Can someone clear my doubts please??
    Interface concept of R/3 is based on two strategies--RFC and IDocs.
    1.]When sending(to R/3) Purchase Order via RFC--Does this mean the PO is transferred by/as a BAPI??
    2.]And ALE mechanism is used to transfer IDOCs.Doesn't the ALE use RFC destination to distribute documents?Then why isn't IDOC/ALE referred to RFC like a BAPI?
    3.]Is this statement correct:loosely coupled applications(MM,SD,PP etc) are tightly integrated because of ALE??Is the integration of various modules due to ALE or a central Database or both??
    4.]Can a BAPI be used to communicate with non R/3 systems say send a PO to the vendor?
    5.]Where does XI feature in all the above??
    Thanks
    Priya

    Hi Priya,
    A lot of questions, but there are not specific to SRM,  General to all SAP Components. Let me try to answer what i can and know.
    1. When sending(to R/3) Purchase Order via RFC--Does this mean the PO is transferred by/as a BAPI??
    Yes. PO is transferred by/as a BAPI.
    2. ALE use RFC destination to distribute documents.  There are two kind of ALE Processes.
    a. Synchronous - Use RFCs or BAPIs.
    b. Asynchronous - IDocs
    Since ALE use RFC destination, it does not mean they use BAPI.
    RFC destination is Remote System you want to reach.
    What you use to carry the data that you decide is it a IDoc or RFC or BAPI. 
    How do you want the response from Remote System that you decide by Synchronous or Asynchronous.
    3. Is this statement correct:loosely coupled applications(MM,SD,PP etc) are tightly integrated because of ALE?? 
    No
    Is the integration of various modules due to ALE or a central Database or both?? They are thru Integration touch points thru program logic in the back. 
    4. Can a BAPI be used to communicate with non R/3 systems say send a PO to the vendor.
    Yes.
    5. Where does XI feature in all the above.
    XI is mapper, translator with Business Partner Network(BPN),EAI tool.
    One Simple Ex.:
    Your PO should turn into Sales Order into Vendor SAP system, then Vendor can do their backend ERP process using that Sales Order. Vendor can send Acknowledgement, Confirmation and Invoice from their system, inturn will be translated into your system on your PO.
    XI sit between any systems and works. It uses XML as communication language.
    Thanks,
    Jay

  • Photo's are pixelated when chosen from Aperture library in System Prefs.

    When I go to system preferences to choose my background image, all my Aperture Images are extremely pixelated when clicked on.
    Example: If I have a 1440 x 900 image to perfectly fit my background it appears as a stretched out 640 x 480 extremely low res image.
    But if I export the photo from Aperture than drag it into the background drop box in System Preferences/Desktop & Screen Saver the images looks like it should. It's just that this way takes way more time and is a hassle.
    Any idea? common problem?
    Aperture 2.1 on 10.5.3

    You my friend are a genius! worked like a charm!
    Thanks
    One more question not related the pixelation is that in System Preferences/Desktop & Screen Saver
    Two 'Aperture Projects' come up with identical content in them of my Aperture Library. Both with the little triangle expander to the left of them. I can't understand why there are two of the exact same thing.

  • Data transfer from BW to other systems

    Hello experts,
                            I have 1 scenario where I have to transfer BW Query result to other system. I checked APD option for the same but I can't create flat file of the output and give it to other system. Can anyone help me for the XML option, where I can transfer my query result using XML to other system or may be by web service. Currently we are on BW 3.5 pack 17. I tried to search in forums but got info about 1 web service called GetQueryViewData but m not able to use it..please guide me.
    Thanks & Regards,
    Priyanka Joshi

    Hi,
    Please go through this link:Export query data to XML-File?
    You can create a ABAP Program with reference to this code:
    REPORT z_abap_to_xml.
    TYPE-POOLS: abap.
    CONSTANTS gs_file TYPE string VALUE 'C:\temp\customers.xml'.
    This is the structure for the data to go into the XML file
    TYPES: BEGIN OF ts_person,
      cust_id(4)    TYPE c,
      firstname(5) TYPE c,
      lastname(7)  TYPE c,
    END OF ts_person.
    Table for the XML content
    DATA: gt_itab        TYPE STANDARD TABLE OF char3000.
    Table and work area for the data to fill the XML file with
    DATA: gt_person      TYPE STANDARD TABLE OF ts_person,
          gs_person      TYPE ts_person.
    Source table that contains references
    of the internal tables that go into the XML file
    DATA: gt_source_itab TYPE abap_trans_srcbind_tab,
          gs_source_wa   TYPE abap_trans_resbind.
    For error handling
    DATA: gs_rif_ex      TYPE REF TO cx_root,
          gs_var_text    TYPE string.
    Fill the internal table
    gs_person-cust_id   = '3'.
    gs_person-firstname = 'Bill'.
    gs_person-lastname  = 'Gates'.
    APPEND gs_person TO gt_person.
    gs_person-cust_id   = '4'.
    gs_person-firstname = 'Frodo'.
    gs_person-lastname  = 'Baggins'.
    APPEND gs_person TO gt_person.
    Fill the source table with a reference to the data table.
    Within the XSLT stylesheet, the data table can be accessed with
    "IPERSON".
    GET REFERENCE OF gt_person INTO gs_source_wa-value.
    gs_source_wa-name = 'IPERSON'.
    APPEND gs_source_wa TO gt_source_itab.
    Perform the XSLT stylesheet
    TRY.
        CALL TRANSFORMATION z_abap_to_xml
        SOURCE (gt_source_itab)
        RESULT XML gt_itab.
      CATCH cx_root INTO gs_rif_ex.
        gs_var_text = gs_rif_ex->get_text( ).
        gs_var_text = gs_rif_ex->get_text( ).
        MESSAGE gs_var_text TYPE 'E'.
    ENDTRY.
    Download the XML file to your client
    CALL METHOD cl_gui_frontend_services=>gui_download
      EXPORTING
        filename                = gs_file
        FILETYPE                  = 'BIN'
       CODEPAGE                  = 'UTF-8'
      CHANGING
        data_tab                = gt_itab
      EXCEPTIONS
        file_write_error        = 1
        no_batch                = 2
        gui_refuse_filetransfer = 3
        invalid_type            = 4
        no_authority            = 5
        unknown_error           = 6
        header_not_allowed      = 7
        separator_not_allowed   = 8
        filesize_not_allowed    = 9
        header_too_long         = 10
        dp_error_create         = 11
        dp_error_send           = 12
        dp_error_write          = 13
        unknown_dp_error        = 14
        access_denied           = 15
        dp_out_of_memory        = 16
        disk_full               = 17
        dp_timeout              = 18
        file_not_found          = 19
        dataprovider_exception  = 20
        control_flush_error     = 21
        not_supported_by_gui    = 22
        error_no_gui            = 23
        OTHERS                  = 24.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    Transformation:
    <xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
      <xsl:output encoding="utf-8" indent="yes" method="xml" version="1.0"/>
      <xsl:template match="/">
        <CUSTOMERS>
          <xsl:apply-templates select="//IPERSON/item"/>
        </CUSTOMERS>
      </xsl:template>
      <xsl:template match="IPERSON/item">
        <item>
          <customer_id>
            <xsl:value-of select="CUST_ID"/>
          </customer_id>
          <first_name>
            <xsl:value-of select="FIRSTNAME"/>
          </first_name>
          <last_name>
            <xsl:value-of select="LASTNAME"/>
          </last_name>
        </item>
      </xsl:template>
    </xsl:transform>
    Thanks
    Sat

  • Data transfer from bw to another system usaing BAPI

    hi friends,
    ple explaing me how can i migrate data from bw to another sap-system or non-sap system usaing bapi.
    i have some idea bat bapi like steps for function modules . i dont have idea for bw.
    There are 5 different steps in BAPI.
    - Create BAPI Structure  
    - Create BAPI Function Module or API Method.  
    - Create BAPI object  
    - Release BAPI Function Module.  
    - Release BAPI object.
    and what abt badis for infospoke.
    Thanking u
    suneel.

    hi friends,
    ple explaing me how can i migrate data from bw to another sap-system or non-sap system usaing bapi.
    i have some idea bat bapi like steps for function modules . i dont have idea for bw.
    There are 5 different steps in BAPI.
    - Create BAPI Structure  
    - Create BAPI Function Module or API Method.  
    - Create BAPI object  
    - Release BAPI Function Module.  
    - Release BAPI object.
    and what abt badis for infospoke.
    Thanking u
    suneel.

Maybe you are looking for