IDOCs delayed when being sent out to Biztalk
Hi Experts,
We are facing a bit of an issue where we are trying to send out a bunch of IDOCs(300+ Orders) to Biztalk. All the IDOCs do go through to Biztalk, however, they are delayed and are delivered sort of every 15 minutes.
Was wondering if anyone has faced something like this? Is there a setting somewhere that needs to be checked or ??
All help appreciated.
Regards,
Manish
Have you checked if 'Trigger Immediately' has been selected in your partner profile?
Similar Messages
-
Summary Alert Issues - Summary Alert Being Sent Out as Multiple Emails
I'm sure many of you have seen the various posts online about Summary Alerts that are supposed to show changes over the last 24hrs in a single email being sent out as either multiple emails containing a random number of items per email, or individual emails
for each item that was updated. The question I have is... Has this issue been resolved with SP2 or any of the Post-SP CUs?
One of my users mentioned that the August 2014 CU was supposed to have a fix for this issue, but I am unable to find any documentation specifically mentioning alert handling or the Summary Alert issue mentioned above.
Current Environment is SP1 + Aug 2013 CU (We're a tad behind -- but I'm working on that)
Any information would be helpful.
Thank you!
MHHi,
I suggest you to delete the existing Rule and setup a New Rule.
I have tested this on my lab and it works fine.
You might want to refer to the below article on Setting up Alert Notifications
https://msdn.microsoft.com/en-us/library/azure/dn306638.aspx?f=255&MSPPError=-2147217396
Hope this helps !
Regards,
Sowmya -
TS4002 emails are being sent out without my knowledge
emails are being sent out without my knowledge, do I have a virus?
Are you getting bounced spam messages? This simply means that someone is forging your address as the 'From' address, which is very easy to do. It's very annoying but it doesn't mean you've been hacked; unfortunately you can't really do anything about it but it usually stops after a bit as they move on to some other victim. As long as you don't have messages you didn't send in your 'sent' folder this is the most likely explanation, though changing your password might be a good idea on general principles (and make it a stong one).
-
How can I attach several images to my Outlook Mac 2011 email message and have all of the images reduced in size while they are being sent out. Thank you
https://discussions.apple.com/message/11994130#11994130
-
I have the 4s and my texts are being sent out by my email...not my cell
I have the 4s and my texts are being sent out by my email...not my cell
Hi,
1. Go into Settings
2. Messages
3. Send and Receive
4. Start conversations from > Tap you phone number
Cheers -
My Scenario 3files to BPM-XI- r3(one file)
when i run my scenarion I have a clock symbol saying " Message being sen6t out" and it does not change even aftre some time. and i also dont see a message sent out from BPM to r3There will be something called "PE" next to the symbol. Click on that. It w2ill take you to the BPM monitoring. then click on the symbol which looks like a table on the screen. This will show you where exactly your message is stuck. Then check the errror, fix it and your scenario should work fine.
-
Invitations not being sent out on Calendar Server 6.3
We would be grateful for any help on this. We can give further details if needed, please just let us know.
Thanks very much.
Issue:
To our customers the calendars server appears to be fully operational and without error. However, when a customer creates a new event and invites other people to attend, no invites are sent out. The event creator, however, believes all is in order as no error messages appear and the list of invitees appears on the event. This was working recently. We have looked for things which have changed (e.g. disk space, size of files, corruption, recent patching, licenses expiring, etc) but have not yet found anything that has changed.
Some details of our system:
./cal/sbin/csversion
Oracle Communications Calendar Server 6.3-27.01 (built Feb 15 2011)
SunOS xxxx 5.10 Generic_142909-17 sun4u sparc SUNW,Sun-Fire-V440
In /var/opt/SUNWics5/logs/watcher.log , we get these notices and errors when we restart the service.
[20/Feb/2012:12:35:56 +1300] (Notice) Received request to restart: store admin http
[20/Feb/2012:12:35:56 +1300] (Notice) Connecting to watcher ...
[20/Feb/2012:12:36:00 +1300] (Notice) 7698
[20/Feb/2012:12:36:00 +1300] (Notice) Stopping http server 7704 ..... done
[20/Feb/2012:12:36:02 +1300] (Notice) Stopping http server 7705 ... done
[20/Feb/2012:12:36:02 +1300] (Notice) admin server is not running
[20/Feb/2012:12:36:02 +1300] (Notice) Stopping store server 7700 ............................................................... timeout
[20/Feb/2012:12:37:03 +1300] (Error) Cannot stop server store with SIGTERM, now retrying with SIGKILL
[20/Feb/2012:12:37:03 +1300] (Notice) Stopping store server 7700 ..... done
[20/Feb/2012:12:37:05 +1300] (Notice) Starting store server .... 7718
[20/Feb/2012:12:37:05 +1300] (Notice) Checking store server status ..... ready
[20/Feb/2012:12:37:07 +1300] (Notice) Starting admin server ....Watched 'csadmind' process 7725 exited abnormally
7725
[20/Feb/2012:12:37:08 +1300] (Notice) Starting http server ....[20/Feb/2012:12:37:08 +1300] (Notice) Received request to restart: store admin http
[20/Feb/2012:12:37:08 +1300] (Notice) Connecting to watcher ...
... 7727
[20/Feb/2012:12:37:13 +1300] (Notice) 7698
[20/Feb/2012:12:37:13 +1300] (Error) store failed twice in 600 seconds, will not perform restart
Watched 'csadmind' process 7844 exited abnormally
What we've done:
We have run db_verify and csdb -v check on the databases. ics50deletelog.db did have corruption, so we fixed that by using db_dump and db_load to export then import the databases.
We also purged the ics50deletelog.db database using cspurge afterwards when the dump and load didn't seem to have had an effect.
We tried putting the log level up in the /opt/SUNWics5/cal/config/ics.conf , but didn't get any more details when restarting the service (through /etc/init.d/sunwics5 restart)
Before we did the db_dump, db_load and purge:
Calendar database version: 4.0.0
Sleepycat Software: Berkeley DB 4.2.52: (December 3, 2003)
Total database size in bytes: 1465503744
Total number of calendars: 14964
Total number of events: 830842
Total number of tasks: 17351
Total number of alarms: 57181
Total number of gse entries: 9
Total number of master component entries: 24100
Total number of deletelog entries: 1779967
Total logfile size in bytes: 79262
Session database version: 3.0.0 [BerkeleyDB]
Total database size in bytes: 0
Total logfile size in bytes: 0
Counter database version: 1.0.0 [Memory Mapped Files]
Total database size in bytes: 0
After the db_dump, db_load and purge:
Calendar database version: 4.0.0
Sleepycat Software: Berkeley DB 4.2.52: (December 3, 2003)
Total database size in bytes: 1201864704
Total number of calendars: 14964
Total number of events: 830845
Total number of tasks: 17351
Total number of alarms: 55116
Total number of gse entries: 9
Total number of master component entries: 24100
Total number of deletelog entries: 1779967
Total logfile size in bytes: 5251612
Session database version: 3.0.0 [BerkeleyDB]
Total database size in bytes: 0
Total logfile size in bytes: 0
Counter database version: 1.0.0 [Memory Mapped Files]
Total database size in bytes: 0
Thanks again.Sounds like we talking about 'Event Invitations Notifications'. These are the notifications that gets sent when some one invite you to an event. Whether you receive the notification or not depends on your preference that is stored in ldap. This can be set using the Convergence by navigating through Options-> Calendar -> Notifcations (Check "Notify me via email of new invitations or invitation changes"). The actual ldap attributes that gets stored in user's entry is below.
icsExtendedUserPrefs: ceNotifyEnable=1
icsExtendedUserPrefs: ceNotifyEmail=[email protected]
In the following cases, the user (attendee) will not get notifications even if the above preference is set.
a> Creating an event with attendees in the past. CS6, by default, suppresses notifications for past events. You can enable notifications for past events by setting the config "ine.pastnotification.enable" to "yes" in ics.conf
b> If the client creating the event requests server not to send notifications. (smtpNotify wcap param for storeevents.wcap). Outlook Connector uses this wcap param, so you won't get server notifications for the events invited using Outlook Connector. Outlook Connector sends it's own notifications directly.
I think, you are looking for these kind of notifications. The process responsible for sending these notifications is "csadmind" on the Frontend. So, you need to check admin.log on the Frontend to see if it is sending notifications or not.
Edited by: dabrain on Feb 21, 2012 9:26 AM -
Emails being sent out even while I haven't had the computer on.
Last week I had a worm email that come to my mac and sent out junk emails. I scanned the system but it couldn't find anything. It didn't bother me because I had order the new 27" iMac which came on Thursday.
I set up the new Mac and used time machine to transfer settings across from a back up I made on the 26 April which was three weeks before the worm email came to me from a PC user. Yesterday, I started getting messages sent to my iPhone about failed delivery of emails like before when I had the worm on my old system. How can this happen on a new system? I have a friend staying with me since Friday so I haven't used the new mac. Any ideas? Also what is the best bit of software for checking for worms? Is it possible that this could be an email issue at the server end?
I have made the assumtion that someone must have hacked my account because I can't see how a brand new machine would be infected by a virus of any kind. Further I was out all day on Saturday and my Mac was not on. Is it possible for viruses to be active on the servers at my email provider?
Any suggestions?
Thanks guys.They are using your email address as the return address and faking all the other headers, or they do have your password and are sending directly using your account.
If they are using your account directly, log into your web mail interface for that account and check the sent mail.
If you find anything in there that you didn't send, then they have your password.
Either way, change your password on the account.
If they just have your email address, you'll just have to wait it out. -
I write one email, Mail Activity shows 2 are being sent out
OK, where is a copy of my email (2 of 2) being sent?
Has General "Tap" Hayden of the NASA hacked my Mac?
[email protected]Hello X:
Welcome to Apple discussions.
As a suggestion, I would not post my E-mail address in any forum. You are opening yourself up for a spammer attack.
Oddly enough, I have a similar "doubling" of the count in my inbox. The system indicates 30 - I actually get 15. I have ignored it as I have not actually received double messages. In my case, it could be because I use a different mail source (AOL) and have Apple's mail application point to the AOL mail server.
Barry -
Helix rear camera flash missing after four being sent out
How do I get in contact with someone that can get something done correctly at Lenovo? Starting 11/24/13 we ordered a Helix Ultrabook for our company and a very pricey tablet at that. Lenovo had no problems taking our money but now after four failed attempts they still have not sent us the correct tablet. We have called and had their tech guy verify that we ordered the correct one and that it was an internal problem at Lenovo and they would get it corrected. They even refunded a around 150.00 dollars to make up for it and was going to get the correct one right out to us. That was number three that was also wrong. So we called up there and told them it was wrong again and they said they are going to get it right this time being this first invoice that we paid had the correct info on it they said it was a manufacturing issue on their end and would get back with us in 48 hours for some kind of payment for our time and to make amends. All of that being an internal problem and none of my concern I just need the product that I ordered and paid for. A company as big as they are and can't even get one order correct after four tries. One would think that someone would walk the assembly line and sign off that it is made and shipped to the specs on the invoice.
PLEASE SEND ME A HELIX WITH THE FLASH THAT IS ON THE SPEC AND IF YOU GOOGLE THE HELIX AND LOOK AT IMAGES IT WILL SHOW THEM WITH ONE.
Here is the last email I got from them and never heard anything else till another incorrect tablet was delivered.
In regards to your order, another replacement order has been created. It is order #4220484752
Please allow 48 hours to receive an update from Marielys Lee.
Thank you for choosing Lenovo.
Best regards,
Customer Service Agent
Lenovo North America
personal informations removedFirst, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting.
If this does not help, set it up as new device, explained here:
How to erase your iOS device and then set it up as a new device or restore it from backups
If still no luck, get it checked by visiting an Authorized Apple Service Provider or contact Apple Support to get it serviced:
iPhone - Contact Support - Apple Support -
Partial assembly of BOM being sent out as subcontracting
Dear All,
Please provide solution to the below given business process
Load Body (sub assembly) comprises of 51 component, once the scanning is done for the load body there is automatic consuption of the compnents through movement type 261 with tcode MFBF.
Now in the actual scenarion in the line partial assembly is done with 23 components and then it is sent to outside vendor (just like subcontracting) to do some quality testing and after testing when it comes back the balance component aare fitted and the scanning is done to product the load body.
Till now the business process of sending the partial assembly to outside is not configure,the contrain is that the existing BOM cannot be changed
Please suggestNaveen,
I think the question is whether you want to map the stock and material flow or not.
1. If not, you can simply create a new routing where you put in the subcontracting operation (using the proper control key - PP02 in standard system).
This would be simple, however, you won't have information on stock level in the system.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/b1/c04ad5439a11d189410000e829fbbd/frameset.htm
2. If you want to have information on stock and material flow I think you have to solve this via purchasing.
Steps:
2a) You have to have a part number (let's say materialA) for the SFG that contains the 23 parts and issue PrdOrd for this
2b) You have to have a part number for the purchased part (that is produced by your sucpntractor, let's say materialB). You need:
- BOM, where header is materialB, children part is materialA (if there are other components to be provided to the vendor you have to insert them in this BOM as well)
- you need subcontracting info record
- you have to send out the components (materialA) to your subcontractor (e.g. MB1B+541 /w and w/o PO reference, ME2O)
- you receive the goods produced by your subcontractor in MIGO with reference to the PO - materialB will be received by mvt 101, materialA (and other components) will be consumed by mvt 543.
2c) You have to create a BOM for your final assembly process where components are materialB and other components, header material is the "load body", you have to have routing, work center (and maybe production version - based on your scenario). So, this last step goes through PrdOrd as normally.
You can find many threads on subcontracting via purchasing and PrdOrd on this forum (MM, SCM-PP)
Regards,
Csaba
Edited by: Csaba Szommer on Jul 14, 2009 8:04 AM -
PDF File corrupted when being sent by email by tomcat... what's wrong?
Hi,
I have been a little frustrated trying tomcat to send a pdf file by email after it have been uploaded to the server.
First case:
If i run the same code in windows, it works.
Second case:
If i run the same code manually in java in the tomcat linux server it works.
Third case:
The problem is when the code is running by tomcat in a jsp page.
In every situation the email goes to the sender, but in the last one, the reported size of the pdf file is not the same as the first and second case resulting in a pdf corruption. It cannot be opened.
I am running Tomcat 5.5.17 with jdk 1.5.0.10 in a Redhat Enterprise Linux 4 Server.
This is the code called by a jsp page.
package eor;
import java.util.Date;
import java.util.Properties;
import javax.activation.DataHandler;
import javax.activation.FileDataSource;
import javax.mail.Authenticator;
import javax.mail.Message;
import javax.mail.MessagingException;
import javax.mail.Multipart;
import javax.mail.PasswordAuthentication;
import javax.mail.Session;
import javax.mail.Transport;
import javax.mail.internet.InternetAddress;
import javax.mail.internet.MimeBodyPart;
import javax.mail.internet.MimeMessage;
import javax.mail.internet.MimeMultipart;
public class SendMailUsingAuthentication {
private static final String SMTP_AUTH_USER = "user";
private static final String SMTP_AUTH_PWD = "pass";
public void sendEmail() {
String from = "[email protected]";
String to = "[email protected]";
String subject = "Sendit from linux ";
String bodyText = "This is a important message with attachment";
String filename = "//home//test//HON-SOLMANT28AGO08.pdf";
Properties properties = new Properties();
properties.put("mail.smtp.host", "Testmailhost");
properties.put("mail.smtp.auth", "true");
properties.put("mail.smtp.port", "25");
Authenticator auth = new SMTPAuthenticator();
Session session = Session.getInstance(properties, auth);
session.setDebug(true);
try {
MimeMessage message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.setRecipient(Message.RecipientType.TO, new InternetAddress(to));
message.setSubject(subject);
message.setSentDate(new Date());
// Set the email message text.
MimeBodyPart messagePart = new MimeBodyPart();
messagePart.setText(bodyText);
// Set the email attachment file
MimeBodyPart attachmentPart = new MimeBodyPart();
FileDataSource fileDataSource = new FileDataSource(filename) {
@Override
public String getContentType() {
return "application/octet-stream";
attachmentPart.setDataHandler(new DataHandler(fileDataSource));
attachmentPart.setFileName(filename);
Multipart multipart = new MimeMultipart();
multipart.addBodyPart(messagePart);
multipart.addBodyPart(attachmentPart);
message.setContent(multipart);
Transport.send(message);
} catch (MessagingException e) {
e.printStackTrace();
private class SMTPAuthenticator extends javax.mail.Authenticator {
@Override
public PasswordAuthentication getPasswordAuthentication() {
String username = SMTP_AUTH_USER;
String password = SMTP_AUTH_PWD;
return new PasswordAuthentication(username, password);
}I will appreciate your help to solve this situation.
Regards,bshannon wrote:
Are you sure you're using the Sun implementation of JavaMail on RedHat? Some versions of
Linux come with the Gnu version of JavaMail included, which might behave differently.
If you turn on session debugging, what does the protocol trace show?
Are you sure you're sending the same file in all cases?
Are you sure the file upload is complete before you send the file?Are you sure you're using the Sun implementation of JavaMail on RedHat?
Yes I am using JavaMail 1.4 from SUN.
If you turn on session debugging, what does the protocol trace show?
Yes. Below you will find the protocol trace.
Are you sure you're sending the same file in all cases?
Yes I am sure.
Are you sure the file upload is complete before you send the file?
Good point. I will check it out!
Protocol Trace output:
Grabando archivo en disco...
DEBUG: setDebug: JavaMail version 1.4.1
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
DEBUG SMTP: useEhlo true, useAuth true
DEBUG SMTP: useEhlo true, useAuth true
DEBUG SMTP: trying to connect to host "168.243.220.232", port 25, isSSL false
220 SMTP IM2 Proxy Server Ready
DEBUG SMTP: connected to host "168.243.220.232", port: 25
EHLO web2.enteoperador.org
250-ESMTP Server Ready
250-SIZE 0
250-DSN
250-AUTH LOGIN
250-AUTH=LOGIN
250-STARTTLS
250 TLS
DEBUG SMTP: Found extension "SIZE", arg "0"
DEBUG SMTP: Found extension "DSN", arg ""
DEBUG SMTP: Found extension "AUTH", arg "LOGIN"
DEBUG SMTP: Found extension "AUTH=LOGIN", arg ""
DEBUG SMTP: Found extension "STARTTLS", arg ""
DEBUG SMTP: Found extension "TLS", arg ""
DEBUG SMTP: Attempt to authenticate
AUTH LOGIN
334 VXNlcm5hbWU6
c3ZhbGxl
334 UGFzc3dvcmQ6
dmFsZXJpYW1pYW1vcg==
235 Authenticated successfully
DEBUG SMTP: use8bit false
MAIL FROM:<[email protected]>
250 +OK Sender OK
RCPT TO:<[email protected]>
250 +OK Recipient OK
DEBUG SMTP: Verified Addresses
DEBUG SMTP: [email protected]
DATA
354 Start mail input, end with "<CR><LF>.<CR><LF>"
Date: Fri, 26 Sep 2008 17:47:18 -0600 (CST)
From: [email protected]
To: [email protected]
Message-ID: <[email protected]>
Subject: Sendit from linux
MIME-Version: 1.0
Content-Type: multipart/mixed;
boundary="----=_Part_0_28970806.1222472838992"
------=_Part_0_28970806.1222472838992
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
This is a important message with attachment
------=_Part_0_28970806.1222472838992
Content-Type: application/octet-stream;
name="//www//tomcat//upload//oper-hon//HON-SOLMANT28AGO08.pdf"
Content-Transfer-Encoding: base64
Content-Disposition: attachment;
filename="//www//tomcat//upload//oper-hon//HON-SOLMANT28AGO08.pdf"
JVBERi0xLjANCg0KMSAwIG9iag0KPDwgL1R5cGUgL0NhdGFsb2cgL1BhZ2VzIDIgMCBSID4+DQpl
bmRvYmoNCg0KMiAwIG9iag0KPDwgL1R5cGUgL1BhZ2VzIC9LaWRzIFsgMyAwIFIgXSAvQ291bnQg
MSA+Pg0KZW5kb2JqDQoNCjMgMCBvYmoNCjw8IC9UeXBlIC9QYWdlIC9QYXJlbnQgMiAwIFIgL01l
77+9DC/vv73vv71YYO+/vVsMF20t77+977+9Nkg777+9bitg77+9KO+/ve+/ve+/ve+/ve+/vXw1
X++/vW8J77+977+9NQknfu+/vQgw77+9TX1177+9YSwS77+9
------=_Part_0_28970806.1222472838992--
250 +OK message queued for delivery.
QUIT
221 Service closing transmission channel closing connection -
Sharepoint Emails Sitting in Queue, Alerts not being sent out via email nor sms
I'm using Sharepoint 2013 Enterprise Edition on Windows Server 2008 R2. I have the mobile account setup correctly (account tested successfully) and I have the email setup for use with gmail (have configured the virtual IIS 6.0 manager to connect to gmail.
Currently when I set alerts they take on sharepoint but nothing is making it outside of the server. I have correctly mapped the mail and mobile phone functions and synchronized the user profiles from the active directory. Configured the Forms Based authentication
(All of which work).
When I look on the virtual smtp manager I can see a large number of connections from unknown IP addresses connecting as my public IP (Suspect bots or spammers spoofing my IP address). I have checked online and the server is not blacklisted. When I look in
the mail root file there I can find the emails / alerts sitting in the queue but going no where. If I manually move a .EML file to the drop folder after a small amount of time I see the file disappear so I know it's going somewhere. Can someone please help
me out here?
I've attached the SMTP Service log below as you can see there are a large number of code 550 which means unable to relay. I'm struggling to understand how that can be when my accounts are all configured correctly?Yes, it probably would be easier to use an existing relay (and easier to manage). I'd use that, instead.
You can also open one of those EML files to check the x-sender/x-receiver headers.
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Alright I'm set to relay through the internal mail server however in the EML file I'm not seeing an x-sender or x-recipient which is weird. Shouldn't SP2013 automatically populate that info? -
Multiple duplicate meeting invitations being sent out
One of exec. admins is experiencing the issue where she sets up meeting invitations (as a delegate on behalf of one of the VPs she supports) and sends them out via Outlook 2003 from her desktop PC. She also has her exchange account on her Iphone which has verion 3 on it. Within a 24 period and usually much sooner, the same meeting invite keeps sending itself out over and over with no way to stop it. We have tried reinstalling MS Office 2003 and reimaging her PC but no resolution, even swapping Iphones. We do know that when her exchange account is completely removed from her Iphone, the entire issue goes away? Anyone else experiencing this issue and if so, any way to resolve it?
We have a similar issue happening in our organization. Our project management team all use iPhone 3G (9 of them.) We manage a team of professionals from many companies and in many timezones, and the members have been receiving way too many copies of meeting invitations from us and are getting angry. Some are forming negative opinions about our organization because of this and blaming our IT team; this needs to stop ASAP. Does the 3.1 verison repair this problem Apple?? It isnt helpful that Apple hasn't been responding to people in their forums with Exchange calendaring problems and this problem Trumps the others by far.
Any assistance would be great! -
Replacement HH being sent out. Told it wouldn't be...
Hi everyone,
I'm on infinity with the infinity HH 2.0. Encountered issues of wireless dropping, on average up to 5 times a day... for months! I've used other routers and never encountered the same amount of problems as I have with this. Anyway.
After 2 ridiculous days of experiencing BT's 'Customer Service' (returned calls that were never returned and without doubt the most frustrating and infuriating customer service experience i've ever experienced!!!) and little to no headway made on fixing the problem, finally today I was offered a replacement HH which I would receive within 3 working days.
I was told it wouldn't be a HH3 even though I requested one. I'm incredibly concerned that this is going to be another 2.0 dud (having seen the absolutely shocking experiences people are having with this model) when I could be issues with the new and supposedly improved model....?
I really don't want to have to go through BT customer services again... *BT should really try to take a leaf out of Apple's customer services 'book'. It is absolutely shocking the difference in quality!!!*
Thanks very much and i'm hoping a mod can intervene and sort this out for me.
Kevin"Thanks very much and i'm hoping a mod can intervene and sort this out for me."
You could ask them
[email protected]
include a link to this topic account number and phone number
If any post helps tick the star box on the left
Just cause Im paranoid dont mean they are not out to get me
Maybe you are looking for
-
IPhone 3GS cannot be synced. An unknown error occurred (-39).
My iPhone 3GS won't sync. I get an error message in Step 5 of 5 when it's trying to delete photos. The message says "The iPhone "iPhone 3GS" cannot be synced. An unknown error occurred (-39)." How do I fix this? Is there anyone out there who can
-
Number of chars in the PR Release strategy
Hello gurus How many chars are allowed in the PR Release strategy? , Is it possible to set up the PR Release strategy with item wise and overall release. Thanks JJ
-
How can I get to know if a method is threads-safe?
Hi, there. How can I get to know if a method is threads-safe? For example, in two different threads, is System.out.print() method safe or not?And where can I find the information with regard to this? thanks very much.
-
How to get applescript or automator to ask system to "detect displays"
I want to know how to get automator or applescript to "detect displays" (which is found in Displays prefpane). Thanks.
-
Install photoshop elements 7 disc
My windows 7 will not install my photoshop elements 7 disc when I insert it. I tried double clicking the DVD rom drive but it just ejects the disc. Can anyone help please.I am a computer novice.