IDOCS Delivery Notes (VL01NO)

Hi There,
Which is the iDoc for sending Delivery Note from R/3 ECC 6.2 ?
What are the below message control parameters for that.
Is that correct if I use
Message Type : SHP_OBDLV_CREATE_NOREF
Basic type  : SHP_OBDLV_CREATE_NOREF01
We usually use t-code VL01NO for Delivery Note.
Thanks

Thank you for your suggestion. But I mean not like that.
I usually use Delivery note without reference (VL01NO) for delivery article to another Site.
Now, I want to use IDOC or BAPI to upload data from outside SAP to SAP.
I've tried using IDOC which
Basic type       : SHP_OBDLV_CREATE_NOREF01
Message type : SHP_OBDLV_CREATE_NOREF
It work, but why if the item more than 1, system create more than 1 document number, when it was still one document ?
Can you help me ?
Thanks

Similar Messages

  • IDOC - Delivery note

    Hi All,
    there is a scenario, whenever a delivery note is created an IDOC has to be generated and the data is sent to the third party customer using XI.
    Message control method is used for the creation of the idoc with the standard output type 'LAVA'. I'm able to create the IDOC whenever i'm saving the delivery note but it is not posting to the XI port . its giving me the status as 30 - 'IDOC ready for dispatch'.
    can anybody help me in solving the issue.

    Swapna,
    Go to transaction WE20.  Click on the partner number for the IDOC you are creating.  Go into the Outbound Parameters of the message you are creating and make sure the "Transfer IDOC Immediately" and "Trigger Subsystem" boxes are checked.  This should make the status 30 IDOCs be processed when they are created.
    Aaron
    Points are always appreciated

  • Invoice and delivery notes - idocs..

    Hello SD experts,
    I am new to SD.
    Can any one tell me what is the invoice. I mean
    what are the table AND transaction codes I have to go and check ?
    What are delivery notes ?
    My functional consultant is telling that
    there is a consolidated invoice and there are 2 delivery notes that are being combined for this invoice. The invoice # is 6016186004
    For DN#   6073107044 there is a VICS BOL that was passed back that is = 04000000000016146 
                   6073107045 there is a VICS BOL that was passed back that is = 04000000000016023
    and he wants to know how the program selects which VICS BOL fields in IDOC.  He gave me to use IDOC #77122253 in quality system for testing.
    In this case , Idoc checking/testing...I need to go to RSNAST00 program ?
    If so then what are the I need to give
    Output application    (is it V1 or MR ?)       
    Output type    ??

    hi ..
    Please refer below..
    for invoice ,  tables: VBRK and VBRP
    AND transaction codes : VF01 to 03.
    What are delivery notes ?
    after goods issue, we need to issues delivery note to customer.
    In this case , Idoc checking/testing...I need to go to RSNAST00 program ?
    you need to go to VL70 or you can process with RSNAST00.
    Output application type : V2
    Output type : LD00
    Regards
    Venkat.. Ananth Technologies

  • STO - IDOC INVOIC - MM Receipt on Delivery note rather PO number

    Hi Gurus,
    I'm processing an MM Receipt INVOIC IDOC to create an Intercompany Vendor Invoice against a Purchase order.
    This is integrated in a standard Stock Transfer Order. This IDOC is generated using Output type RD04 from Intercompany billing.
    When SAP creates IDOC, it is based on the Delivery note number rather than the PO number, even I have the PO and Delivery in my PO historic, and even if I have IDOC segment E1EDP02 QUALF 001 with PO and segment E1EDP02 with QUALF 016 with Delivery note.
    I tried to managed PO item flags: "Invoice Receipt Indicator" or "Indicator: GR-Based Invoice Verification".
    But there is no impact.
    When I create the MM Receipt manually using TCode MIRO in reference to the PO. It works.
    When I create the MM Receipt manually using TCode MIRO in reference to the Delivery not. It doesn't work. I got the same error message "Delivery note/service entry sheet xxxx does not exist".
    I conclude that when SAP performs the IDOC, someting in the IDOC tells him to create a invoice in reference to the Delivery note rather than the PO. How can we change it?
    Please, could you help me to understand this blocking point and to allow to create the MM Receipt on PO?
    Many thanks.
    Stéphane.

    hello, friend.
    i am not an expert in MM, but....
    i noticed that when using MIGO, you can do GR based on an inbound delivery, and maybe also an outbound delivery (from STO).  an outbound delivery created in an STO scenario should have links to the STO related PO.  could this be the link you are looking for?
    regards.

  • IDOC for transfer order for delivery note LT03

    Hi All,
    I need to generate an outbound IDOC upon transfer order creation in Tcode LT03.
    I found there are two types of IDOC discussed in this forum before. One is the Canceling Transfer Order IDOC and another one is the Confirmation Transfer Order IDOC.
    I'm not sure whether these relevant to what I need or not.
    Can i know what FM, message type and basic type should I use for this situation?
    (generate an outbound IDOC upon transfer order creation in Tcode LT03)
    Please advice.
    Thanks.
    Best Regards,
    JL
    Message was edited by:
            KAR SENG LAW

    I found something here,
    Someone is using FM: L_IDOC_INPUT_WMTORD, message type WMTORD and basic type WMTOID01 in doing this when trying to send an Idoc to an external system when a transfer order for a delivery note is created (LT03). Is it OK ?
    need advice.
    Thanks again.

  • Delivery note printout not coming when PGI is done by Idoc

    Hi All,
    We are doing a third party  WM-SAP interface project.
    Earlier in SAP when PGI was done for delivery note the print use to come automatically.
    But when the PGI is done through Idoc the print done not come and it requires the user to go to VL02n and save to get the print.
    Please help.
    Pankaj

    Hi,
    Please check the SAP note 393096.
    Summary
    Symptom
    During pick order verification/vendor confirmation via the logical messages WHSCON, SHPCON and SDPICK, no message determination is carried out in the delivery for subsequent messages. If the picking process is performed manually using Transaction VL02N, then message determination for subsequent messages takes place when you save the delivery.
    Other terms
    MESSAGING, DELVRY01, DELVRY02, DELVRY03, WS_DELIVERY_UPDATE, VL10CUC, VL10, LD00, delivery note, pick
    Reason and Prerequisites
    As of Release 4.6C, during inbound processing of the logical IDoc categories WHSCON/SHPCON, the system reads the VL10 profile '2000' and interprets the profile parameters.Among other things, the VL10 profile '2000' contains a parameter (NoOutputDet.) that can deactivate message determination for the process.
    Solution
    Start Transaction VL10CUC ("Parameter per Profile in Delivery Process") in change mode.
    Go to the detail screen of the profile '2000'.
    Check the status of parameter 'NoOutputDet.' and adjust the settings of the parameter as follows:
    If the parameter 'NoOutputDet.' is active, then message determination is not carried out for the process.
    If the parameter 'NoOutputDet.' is not set, then message determination is carried out for the process    
    Please reward points if it helps
    Seema

  • For the new delivery type created the Idoc is not getting triggered

    Hi All,
    I am facing the following problem:
    For every outbound delivery getting created we have an Idoc which creates the file(sending the outbound delivery details), this file is sent to a system where the picking & packing of the goods happen. This process seems to be working fine for all the existing delivery types, but now we created a new delivery type for which the Idoc is not getting triggered.
    Would like to understand what setting are we missing because of which the Idoc is not getting created for the new delivery type.
    The Idoc being used is:   DESADV01
    Message type :DESADV
    Thanks,
    Geeta

    I believe your existing idocs are created through a output type on the delivery ? if yes, probably you need to configure an existing output type / create a new output type for your new delivery type...

  • How to reverse goods issue for delivery note by using IDoc

    Hi all,
    I would like to reverse goods issue and picking request for delivery note by using inbound IDoc.
    I used message type SHPCON and IDoc type DEVLRY03 for posting goods issue in inbound processing and it's work but I couldn't find solution for posting reverse goods issue.
    Pls let me know which IDoc type or any ways for posting goods issue reversal and cancelling picking request.
    Thanks for your time.
    Su R.

    Hello,
              For this requirements we can actually follow two Approaches that I can think of. Here they are.
    Approach 1
             Little Complex Approach. What we can do is to make use of the Same Function Module (Posting Program) IDOC_INPUT_DELVRY to do the Delivery Updates (Except reversing the Goods Issue). During this,  we can make use of one of the Customer Functions available in the Enhancement V55K0001 and satisfy our Requirement.
    Approach 2
            We can actually code a Custom Posting Program (Function Module) in which the first part will take care of updating the Delivery & if the PGI is done, then we can make use of the Function Module BAPI_GOODSMVT_CANCEL to reverse the PGI.
            I think the later Approach is much easier rather than going for the Standard Function Module (Posting Program), Exits and find a place where we have to find another Enhancement Spot / Enhancement where we can call the above FM to Cancel the Goods Movement.
    Hope these inputs were helpful.
    Thanks and Regards,
    Venkat Phani Prasad Konduri

  • Add ordered quantity to delivery note idoc desadv01 with user exit

    Hi,
    I am using the IDOC DESADV01 to output electronic delivery info when a user PGIs on a delivery note.
    The problem is I need some extra data like the original order qty, this exists in field VBAP-KWMENG
    So I think I would need to extend the idoc and do some kind of user exit to populate the value into the new idoc field.
    Unfortunately I have no experience with this, can anybody advise if its the correct way and how to get started?
    With thanks
    Rob.

    I apologies our system is totally different based on that I suggested.
    But current I guess you have to extend idoc.
    Below link is helpful for extending idoc.
    Let me know if still if you face any problem.
    http://www.intelligententerprise.com/channels/applications/feature/archive/kasturi.jhtml
    Thanks,
    Narayan

  • Reg : change pointer mechanism for triggering the IDOC for delivery note

    Hi ,
    I am working on a change pointer mechanism for triggering the IDOC for delivery note and will be using this message class DESADV.
    So SAP has suggested for assigning the message class DESADV with the function module in MASTERIDOC_CREATE_SMD_DESADV in BD60 transaction code.
    So I was looking to create this MASTERIDOC_CREATE_SMD_DESADV function module in SAP and SAP suggesting that  we should create this MASTERIDOC_CREATE_SMD_DESADV function module as same as the function module MASTERIDOC_CREATE_SMD_MATMAS.
    So do anyone knows that is there any tool has been provided by SAP for creating this function module MASTERIDOC_CREATE_SMD_DESADV in SAP system for triggering the change pointer mechanism for outbound Delivery.
    Thanks !
    Regards,
    Kiran

    Hi,
    When you are change pointer the system itself will take care of sending the changed master data to your partner system and the user will not have any intervention.  If you really wanted to have that then you need to use the change pointers to read the master data which is modified in a custom program and then display that on the screen.  Once the user selects that master data records then trigger an IDOC for creating the idoc for that master data and also flag that master data record as processed in the SAP BDCPS standard table, so that the same record will not be picked. If you wanted to know how the change pointers piece of code is written go through the program RBDMIDOC and you can understand how the change pointers logic is written.
    Thanks,
    Mahesh.

  • IR by EDI810 not matching GR with delivery note

    Hello,
    We met with the issues of IR not matching to the specified GR after the IR invoice is loaded by EDI 810.
    For example, one PO item has two GR docs, the 1st one has 2 in qty with delivery note 125-1, and the 2nd one has 3 in qty with delivery note 125-2.
    Then we load an INVOIC02 idoc(only 1 E1EDP01 segment) for the 2nd GR doc, because its invoice arrived earlier. In the INVOIC02 idoc the delivery note is 125-2, the qty is 3.
    What we expect to get is an IR document with one item related to the 2nd GR(qty 3). But the result is the created IR has two line items, the 1st item(qty 2) related to the 1st GR and the 2nd item(qty 1) related to the 2nd GR.  Thus it looks confused.
    It seems in this case the system directly assign the GR to IR in sequence of GR creation time. It doesnu2019t even get the delivery note number and use it to get the exact GR doc this IR related to.
    We wonder whether we use the correct segment and field(E1EDP02- BELNR when QUALF=u2019012u2019) for delivery note. Or what other solutions we need to take?
    BR,
    Chloe

    Hi ,
    Try with Table RBKP incase of Logistics Invoice Verification.
    You may also try with  BKPF for Conventional Invoice Verification.
    Regards
    Ramesh Ch

  • Outbound Delivery Not getting created

    Hi Gurus,
    Outbound Delivery Not getting created
    there is a DESADV IDOC that is supposed to create inbound dely, do the GR then create Outbound delivery and shipment (all automized). But this is not happening.
    There is workflow set up that is blocking this...Task no TS95000019 is responsible for passing the values. This will show up in the SAP inbox with error description.  But i am able to see TS95000018 but TS95000019 is not showing up in the workflow log.
    Can anyone let me know what setting is missing in workflow so that this task shows up and i can make the system create outboud delivery and shipment automatically
    Please help
    Sunil

    Sunil
    First check whether that particular task is active in your client.
    For a task to get triggerred you need to activate the triggerring settings.
    Use PFTC T-code, input your task as TS and ID as 95000019
    click on view button
    Then click on " Triggerring Events" tab page.
    View whether your task 95000019 is active. Green light will appear next to it in the left most column. If it is grey or red, then you need to change it to green. Only then it will work. Once this gets triggerred, subsequently it will pass the message to your inbox with correct error message and then only create an outbound delivery.
    Hope this will help you out !
    Regards,
    Syed Nasir

  • Output Type for Deleting Delivery Notes completely

    Hello,
    I've a problem that in case of complete deletion of a delivery note I want to get message of deletion via IDOC DELVRY05. Normally the complete document will be deleted without any outbut determination.
    Where do I have to implement this? Is it in normal output determination for outbound deliveries?
    Thank you for your effort.
    Kind Regards
    Norbert

    *

  • ASN(Advanced Shipping Notification) & EDN(Electronic Delivery Note)

    Hi All,
    Could some one please share me some info on ASN and EDN please?
    I'm quite new to this area. Our customers are expecting ASN's and EDN's after sending the ORDERS data from EDI.we are using seeburger as 3rd party.
    I believe we can import some idoc's related to this ASN and EDN from ERP and send it to the customers, is this an appropriate approach?
    Could some one please explain me the process or any step by step guides will help.
    Thanks in advance.
    Smith

    Hi Smith,
    I have very basic information about ASN & EDN
    ASN
    An Advanced Shipment Notice (ASN) is an EDI formatted electronic notification of pending deliveries; an electronic packing list. The goal of the ASN is to provide information to the destination's receiving operations well in advance of delivery.
    An ASN can provide a list of all of the barcoded ID numbers of the shipping units and the contents of each. The time required to receive the load, then, is greatly reduced.
    EDN
    The goal of the EDN is to provide the delivery note to the vendors as completion of receiving operations as per the scheduled delivery. In EDN the validation is possible with the help of barcoded ID numbers provided as per the ASN.
    Probably below link will provide you more detail information about it
    http://esoadocu.sap.com/socoview(bD1lbiZjPTgwMCZkPW1pbg==)/render.asp?&packageid=DBBB6D8AA3B382F191E0000F20F64781&id=5A3F67AA65314AD2A223FF5BE5D09C40
    http://www.sap.info/public/INT/int/index/PrintEdition-3926423e72de89a3d-int/2005/articleContainer-43454262d8a505fe2
    http://help.sap.com/bp_bblibrary/500/html/W41_EN_DE.htm
    http://www.tangentia.com/ecircleasn/
    Thanks
    swarup

  • Quality Certificate Issue with multiple batchs with same delivery note

    Hi,
    Hi,
    My Company Business Process:
    Quality certificates are generated prior to the good receipt through IDOC process.
    When we  receive the goods, GR should look for existing quality certificates and trasnfer the inspection results to inspection lot.
    When we are trying to receive for single batch & delivery note, It is looking for existing quality certificates. There is no problem in this senario.
    But when we receive the multiple batchs with the same delivery note, system is generating new quality certificates. It is not looking for existing QC which got generated through IDOC process. This is the actual proble.
    Note: I am not sure is standard SAP does not supprot  to receive the multiple batchs with the same delivery note or not at the time of GR. Please advise me.
    Thanks,
    Suman

    In data origin in certificate profile SAP supports " mix the origins within a characteristic. For example, the results data can originate from an inspection and the specification data can originate from batch determination."
    Now here question arises Is batch determination of one batch or multiple bacthes took place against a single delivery note.
    As per my understnading it should be one batch with is supported in std SAP.

Maybe you are looking for