Idocs error: Non-updated Idocs found in Business Inormation Warehouse

Hi
I have found this error for delta load.
"Non-updated Idocs found in Business Information Warehouse"
I know that if the non-updated idocs found in source system, we can use
BD87 to manual update.
But it is with in the BI.
Can someone please help with steps involved.
Thanks

I will suggest you to set the delta load request to red and then reset the delta flag. Reload the last repested delta will include all missing idocs. That way it is much cleaner.
Good Luck,
CL

Similar Messages

Non-updated Idocs found in Source System

Hi Experts,
I am getting an error Non-updated Idocs found in Source System
Plz help me to resolve this issue.

Hi
BD87 Update Idocs manually.
1. When you look in the Monitor screen for the first time on a day you mostly will see some Loads that have yellow traffic lights. When you click on the lowest line of the Load (with the time of Load start) you will get the next popup screen:
2. Here you can click on the "Yes" button. The Load specification window (right side of the screen) will now be filled with data.
3. You can now start the manual processing of the IDocs. You go to the "Details" tabpage of the right window. You right click on the line with the red traffic light stating "Request IDoc : IDoc ready to be transferred to application" on the "Details" tab page of the Load. In the option menu that appears choose the option "Update manually in OLTP" (click it).
4. You will get to the next screen (which is in fact a transaction in the source system (SAP R/3) where you can update the IDoc that is send by the source system)
5. Now click the "Excecute" button on the left of the screen (or press the F8 button on your keyboard). You will get to the next screen:
6. This states that the IDoc has been passed through to BW. You return to BW by clicking the "Back" button (or pressing the F3 button on your keyboard) twice. After the first time you will see the previous screen and after that the Monitor screen again.
7. You will now see that the Status of the Load has turned to yellow or green. When it is yellow you will have to wait a little time (the execution of the Load in BW is still running) and by clicking "Refresh Details" button on the left upper side of the screen (or pressing the F8 button on your keyboard) you will see the Load turn green.
Hope it helps

Non-updated Idocs found in Business Information Warehouse

Hi,
I got the following error while trying to load data:
"Non-updated Idocs found in Business Information Warehouse
Diagnosis
IDocs were found in the ALE inbox for Business Information Warehouse that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually. "
Please help me solve this issue.

Hi,
Actually i tried all these options. I updated the idoc manually, and now the following message comes :
"Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
Data packets were found that have not yet been rea "
And the process is on for the past 5hours. Can i do something regarding this?

R3 to BW Extraction fails: Non-updated Idocs found in Source System

We load data from R3 to BW and this process has been successful for the past few days except last night. The error msg is listed below in between two dashed lines:
Non-updated Idocs found in Source System
Diagnosis
IDocs were found in the ALE inbox for Source System that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
I checked the system connection by right click the source system in the Source System page on BW and selecting "Check" and "Customizing for Extractors" from the context menu and find everything works fine.
Any idea about the IDOC thing?
Thanks

hi Subray/Bhanu,
With WE05, find some records with yellow status. How to find some missing data here?
With BD87, under BW system folder, there are two folders:
1. IDocs in outbound processing
2. IDoc in inbound processing
Under 1st folder, there is one yellow status folder called "IDoc ready for dispatch (ALE service)", continue to expand another folder called CREMAS under it, there is a blue information line which is "Receiver found , Data filtered , No conversion , No version change".
Under 2nd folder, there is one yellow status folder called "IDoc ready to be transferred to application", continue to expand other two folder under it called "BBPIV" and "RSRQST", find there is a red flash status line which is "No resources, immed. processing not possible: Too few free dialog work" under these two folders.
I need to go ahead to select these two red flash status lines and then press the Process button at the top bar?
Thanks
Message was edited by: Kevin Smith

Problem with non-updated idocs

Hi,
we have a problem after upgrading from 3.5 to 7.0. Lots of extractors end
in an error-message concerning non-updated idocs. Every day several
extractors have this problem. This are not always the same extractors. As
a result we must repair many extractions manually.
I know the procedure of how to repair, but I want te know how I can prevent
extractors from running into this problem in the first place.
Any suggestions?
This is the problem-message that we get...
Non-updated Idocs found in Source System
Diagnosis
IDocs were found in the ALE inbox for Source System that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs
manually using the Wizard or by selecting the IDocs with incorrect
status and processing them manually.

It has been happening on our env as well (BI 7.0 SP 12), time to time one load or the other gets into this problem and it waits yellow for few hrs before turning red.
I can correct the IDOC and move on or run the load again it works fine.. but the process chain gets held up not going to the next stage for hrs..
any resolution on your problem..
thanks
Mayil

Error Loading Hierarchy Error when updating Idocs in Source System

Hello Friends,
I am loading hierarchy data using Info pac into 0FUNDS_CTR . I have selected a hierarchy under hierarchy selections tab in the Info pac .
All Partner profiles in WE20 seems OK . But When I loaded data , throwing errrr message as below
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
When I checked in TC WE05 says that IDoc: 0000000000355113 Status: Error during syntax check of IDoc (outbound) with status 26 .
Please advice .
Many thanks

Hi Krishna4bi,
Actually we will monitor idoc status in BD87 in SAP BI As well ECC , while extracting the data from source sytem if any idoc struck we will manually process in BD87 , But you are telling that while loading the datasource the error occurred , so please check once in ECC side . Otherwise see how many packets are still process, make it red that infopackage and do manually update.
Hope it helps,
By,
Praveen Yagnamurthy,
SAP BI Consultant,
Blue Marlin Systems-INDIA.
http://bluemarlinsys.com/bi.

Error when updating Idocs in Source System - Urgent

Hi Team,
When i was loading the data from SAP R/3 to BW, i was facing the error "Error when updating Idocs in Source System" (0 From 0 Records).
When i check in the Environment>Transaction RFC->In the Source System, it was displaying the error--
<b>" Import container contains errors (are any obligato) in the Function Module: IDOC_ERROR_WORKFLOW_START_R".</b>
Can any one please help me to solve this error.
This is am Urgent requirement for me to deliver.
Thanks & Best Regards,
Venkata.

Hello VenkaTa,
How r u ?
The workflow settings are not proper it seems. Ask the BASIS people to correct the Work Flow Settings. Then try Updating the IDOCs manually.
Also check the Inbound and outbound IDOCs in the Source system. The outbound should contain some warnings or errors.
Best Regards....
Sankar Kumar
+91 98403 47141

Error when updating Idocs in Source System

Hi All,
We did a recent copy from QAS to DEV,after which am unable to run my process chains ,the load status still showin yellow signal,whereas job is getting finished but am unable to load datas to the targets. Am getting the following error message when i see the display message in process chain.
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
Error when updating Idocs in Source System
Could anyone please let me know what can be done ?
Thanks
con

Hello All,
I have same problem but its RESOLVED by the following process.
Step - 1
execute the Function module "SCP_LANGUAGES_IN_INSTANCE". It may or maynot give some output. Just note if it give the output
Step - 2
in Transaction SE38 execute the program "RSCPINST".
Just Click on the Activate button (dont select anything).
Step - 3
Again do the same thing specified in Step - 1. Now it will give the output saying that Language is DE.
So by the above procedure my issue is been resolved.
Regards
Sankar

Non updated Idocs in BW

Hi Experts,
Error message i get is:
{IDocs were found in the ALE inbox for Business Information Warehouse that are not updated.
Processing is overdue. Process Idocs manually.}
Please suggest what can be the solution for this issue.
Thank you very much,
Neel

Hi Shu Moh / Pradip,
I am not able to see the radio button section for assigning points now, is there any problem?
I will not forget to reward points once it is ok.
Thanks a lot for your response
Neel
I was able to reward points.
Basis team is working on this issue, will post once the problem is figured.
Message was edited by: Neel

SAP IDOC - XI - NON SAP IDOC (tRFC)

Hi all,
our scenario is as follows:
1) SAP ERP 2005 send an IDOC to XI (NW04S, 7.0)
2) XI dos nothing, just routing. So no mapping or stuff like that
3) XI should send the IDOc to a non SAP System via a tRFC (registered program id)
a) IDOC can be sent to XI and for test we introduced a file adapter. The IDOC is written to the file system successfully.
b) tRFC is registered connection test ok to the NON SAP System.
c) SLD is maintained with a NON SAP technical and a business system
d) Which adapter to use?
- IDOC Adapter (following error)
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_RCV_SERV</SAP:Code>
<SAP:P1>BS_OS_N_SEEBURGER</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Receiver service BS_OS_N_SEEBURGER cannot be converted into an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
- RFC Adapter (following error)
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_ROUTING_BACK_ERROR</SAP:Code>
<SAP:P1>P_OS_EBV_511158_RECEIVER,BS_OS_N_SEEBURGER</SAP:P1>
<SAP:P2>,BS_OS_OSQ_300,,</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error occurred during back-routing Error in communication channel</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
If I set the IDXNOALE the message is succesfully processed but not received by the NON SAP system which is connected to the same tRFC.
I do not know how to set this scenario, any ideas?
Thanks
BR Markus

Hi all,
at first thanks for the fast reply.
I do not use any kind of mapping, so the message should be prozessed through without any changes.
So two questions:
1) Where to set the exactly once, ...?
2) Where to set the return paramaters?
Inside the SLD the logical system name is configured. I had the settings maintained like Sergio wrote it.
I changed my configuration to the following:
- No Party
- No Business System
- Creation of a Business Service with the same Logical System as configured in the Bus of SLD
-> Everything works all right
So I created the scenario with No Party but again with the Bus and everything was all right, so.
I had any error in the first scenario but I do not know which one, too many thing changed during the process of problem solving.
Thanks a lot anyway.
BR Markus

LSMW Idoc error in start idoc processcing as No data could be selected

Hi Abapers
am uploading the data Using the LSMW-IDOC Method.
it is executing successfully Up to the 13th Step I.e start idoc generation.
when i execute the 14th Step Start Idoc Processing.
am getting the Popup information Error like...
Error: No data could be slelected .
Can any one help me on this issue
Edited by: saeed.abap on May 30, 2011 10:12 AM
Edited by: saeed.abap on May 30, 2011 10:56 AM
Edited by: saeed.abap on May 30, 2011 10:57 AM

Hi Abapers,
Im working on datamigration for Business partner using Lsmw idoc method and getting Idoc status 53 with message crmxif_partner_save function module generated successfully with BP number but some of the entries of the fields is not getting inserted into master table BUT000,can any one put a tip of light what exactly is going wrong as i have taken all necesscary steps if any one can share their views like how to trace the posting program for inbound idoc crmxif_partner_save_m02 and where exactly the data is getting inserted into database table BUT000.
Will appreciate all your help.

Error - No update server found for context

Hi
I'm trying to write a BSP page that sends E-mail via sap connect.
I did try to get the demo program bsptutorialmail from package SBSP_DOCU to work.
When I try to send an E-mail, the program terminates with
500 SAP Internal Server Error
Error message: No update server found for context :b: ( type of termination: ABORT_MESSAGE_STATE )
I can in my system send e-mail from a standard program using the function Z_E_KEG_SEND_SIMPLE_EMAIL that I found in a weblog here on sdn
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
I have not been able to find any info on this error, just a hint that I need to configure some RFC destination ?
Any hints on how to solve this are very much appreciated

I found nearly that exact same error message in an old MM OSS note - 333941. The error message there was in ME47:Termntn A:No update server found for context:X. Now that was context:X and not context:b like in your error, but perhaps the solution then will lead you to some clues. The following were the code changes of that OSS note:
Delete Block
    SET LOCALE LANGUAGE EKKO-SPRAS.            "CF 4.5A TODO
    XEINA-SORTL = XEKPO-TXZ01.
Insert Block
    DATA: S_LANGU LIKE SY-LANGU.
    S_LANGU = SY-LANGU.
    SET LOCALE LANGUAGE EKKO-SPRAS.                         "149717
    TRANSLATE XEINA-SORTL TO UPPER CASE.                    "149717
    SET LOCALE LANGUAGE S_LANGU.
On one hand this correction might be telling us that this error has something to do with language, or more specifically the act of not returning the local language to the logon language. On the other hand, maybe it is just leading us on a wild goose chase.
Message was edited by: Thomas Jung

IDOC-XI-Idoc error in inbound idoc

Hi all.
   We have a Idoc-xi-idoc scenario.
   SAP R/3 - Xi - SAP CRM
   We have configure the idoc out in SAP R/3. And I use we19 to test the Orders Idoc and check the staus is ok.
   But in XI, I cannot see the Orders Idoc is sending in. However, this time I havenot configure any repository and directory.
   My question is , if I havenot configure XI repository and directory, how can I check the Idoc in error messages ? How can I know that the SAP R/3 idoc is sending to XI correctly ?

Hi Jianhong,
plz check SM58 at R/3. Assumedly the IDoc was refused by XI - because of missing Configuration in IB Directory.
Regards,
Udo

IDOC error - Receiver of IDoc is its own logical system

hi,
i have a requiremnt to generate the IDOC for the same and same client. actually i have to get the data from application server and i have to generate the IDOC.
for this i have created a Zreport and passed the data from application server to segment and i called the
FM "MASTER_IDOC_DISTRIBUTE". after executing the Zreport, IDOC is generated and show the error
status as 29.i.e. Receiver of IDoc is its own logical system.
my logic is as follows.
MOVE 'LS' TO w_edidc-rcvprt.
MOVE 'SBECLNT130' TO w_edidc-rcvprn.
MOVE 'ISU_MR_UPLOAD' TO w_edidc-mestyp.
MOVE 'ISU_MR_UPLOAD01' TO w_edidc-idoctp.
pls let me know the solution for this problem.
Regards,
Balu

Hi Reddy,
please let me know how did u solve this issue, even i have the same requirement and am gettign status 29.
Thanks
Rakesh

IDOCS Error - Not getting processed automatically

Hi All,
We are loading hierarchy for a Product from R/3 system using the standard datasource.
When we execute the info package, IDOCs are not getting processed automatically.
We are facing the below error message.
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
No status record was passed to ALE by the applicat
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
But when we goto BD87 and process the IDOCs manually, these are getting posted and the hierarchy is loading.
Can someone please guide me on what is the issue with the IDOCs and how to make them to post automatically.
Thanks in Advance
Regards,
Sachin

Hi,
This will happen due to Non-updated IDOCu2019s in the Source system i.e., occurs whenever LUWu2019s are not transferred from the source system to the destination system. If you look at RSMO of the status tab, the error message would appear like u201CtRFC Error in Source Systemu201D or u201CtRFC Error in Data Warehouseu201D or simply u201CtRFC Erroru201D depending on the system from where data is being extracted. Sometimes IDOC are also stuck on R/3 side as there were no processors available to process them. The solution for this Execute LUWu2019s manually. Go to the menu Environment -> Transact. RFC -> In the Source System from RSMO which will asks to login into the source system. The u201CStatus Textu201D for stucked LUWu2019s may be Transaction Recorded or Transaction waiting. Once you encounter this type of status Execute LUWu2019s manually using u201CF6u201D or Editexecute LUWu2019s(F6).Just keep on refreshing until you get the status u201CTransaction is executingu201D in the Production system. We can even see the stuck IDOCu2019c in Transaction BD87 also.Now the data will be pulled into the BW.
Hope it helps a lot.
Thanks and Regards,
Kamesham

Idocs error: Non-updated Idocs found in Business Inormation Warehouse

Similar Messages

Maybe you are looking for