IDOCs missing in XI

Dear MDM Gurus,
I've imported the MDM business 5.5 content to the XI, create the mapping and ALE settings, and I like to send MATMAS IDOC from ECC 6.0 to MDM with mdm_clnt_extr. But on XI side the standard logistic idocs is missing like BOMMAT04, ECMMAS02, CREMDM04, DEBMDM06, DOCMAS04, MATMAS05, etc. The ECC system cant' send the idoc because the other side the idoc schema is missing. Perhaps I have forgot to install some add-on or other component?
Regards
Almos Paksi

Hi Almos,
When you import MDM business 5.5 contents in IR, it comes without Imported Objects.
If you want to use standard XSLT mappings, u can copy it to ur namespace & use it.
What u need to do is:
Copy proper Imported Archive from MDM BUSINESS CONTENT 5.5 to ur namespace.
Import Required IDOC from ECC 6.0 system to ur namespace.
& then apply this copied XSLT mapping.
Hope this is clear to u.
If u want some help u can ask.
Thanks,
Maheshwari.

Similar Messages

Error message : Info Idoc missing ;database system

I am trying to load the data from database system oracle ,the data was successfully loaded into psa , but cant able to load the data into ods from psa .
Data in psa is all green without any errors , as info idocs are missing its not letting to load data manually from psa to ods ,
I try to reload but coming up with same error
Next day problem was fixed automatically, I want to know what is the exact reason for this problem and how can next day it fixed automatically

Error message : Info Idoc missing ;database system
I need the solution urgently, please help

Idocs missing from source system

Hello,
I am trying to extract data from R3 to BW. I am getting an error message in BI, No idocs arrived from the source system.
In SM58 system showing the message 'No service for system SAPECC, CLIENT 800 IN INTEGRATION DIRECTORY'. Please help on this issue
Regards,
Ramesh

Hi Ramesh,
Check whether the connection is proper between BW & R/3.
Goto your Source system> Right clcik> Check.
You can also check the following :
No Idocs arrived from the source system.
Idocs missing: No selection information arrived from the source system
Error when updating Idocs in Source System
Hope it helps!
Regards,
Pavan

Idoc "missing" between SAP and PI

Hi!
We have an issue with Idocs that are "missing" between SAP and PI. First 5 idocs were processed ok, then 3 went into yellow status. We have set up queue processing on this particular idoc type as there can be posted 2 at the same time. The problem started when 2 idocs were processed at the same time
What have been done
- SMQ1/2 in SAP system does not show any trace of these messages
- SMQ1/2 in PI system does not show any trace of the messages
- Message monitoring in PI does not show any trace of the messages
- SM58 in SAP system is empty
- SM58 in PI system is empty
What checks remain to find out where these Idocs are stuck?
Thanks!
regards Ole

Hi Ole,
Refer This link for IDOC Monitoring.
http://help.sap.com/saphelp_nw70/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
In this it is mentioned like
Main Tools
XI Runtime Workbench
Transactions:
u25CF     IDX1
u25CF     IDX5
u25CF     SXMB_MONI
u25CF     SM58
u25CF     SM21
using these we can monitor..
Thanks.

IDOC Missing Segment Field

Hi,
Some of my outbound IDOC's are missing a particular field in the Segment.....
This is probably because that Segment field don't have any value and hence missing from IDOC.
What can be the possible approach for Solving this probelm?

Hi Abhishek,
Can you please get the solution for such issue?
I didnt aware of Enhancement Spot...
Looking for your reply..
Regards,
Raghu
Edited by: Raghu Raman on Jan 5, 2009 1:27 PM

IDoc missing system status in sales orders at one or more item pos..

Hi Guys,
I have a smalll querie.
When i process idoc of the sales order , few of the items system status are missing.
Please help me out.
Thanks in advance

veera
can you explain little bit clear...
Ramesh

IDOC: Missing text in Inbound Del

Hi gurus,
Does anyone know or encountered this scenario:
I created PO, Delivery and Shipment in BoxA. Automatically Delivery doc that has been created will reflect to BoxB via IDOC, as well as the Shipment. Well, it was posted and successful. But the problem is there are missing values in delivery.. Supposedly, there should be header texts defined in the delivery.
I've checked the segments in we02 and the texts are there.. It's my first time to hanle IDOC issues.
Help me...will be rewarded if it works.
Thanks!

Hi,
Maybe the header texts are maintained in a different language other than EN.
FOr this, do a select on STXH..
tables: stxh.
select single tdspras from STXH into STXH-tdspras where Tdobject = ws_tdobject
                                                                            and tdname = ws_tdname
                                                                            and tdid = ws_tdid.
THen,
     call function 'READ_TEXT'
          exporting
                       xxxxx
                       xxxx
                       lang   = stxh-tdspras
We experienced this problem today and resolved it like this.
Try...
Regards,
SUbramanian

Idoc Missing On the ECC SAP System Side

Hi All
In my case an Idoc is being sent to the SAP ECC system from XI . I can see the message is successful in SXMB_MONI of XI, the message has a chequered flag , I also locate the IDOC in the IDX5 in the outbound entries . But I am not able to locate it WE02 Idoc List .
I have checked the SMq2 in both XI as well as ECC but the message is not being held here .
I checked SM58 on the XI side . It has no errors. On the ECC side i can see some entries . Now how do I locate which entry might be for my message . Is there a way to see the detailed error message for an entry in SM58 on the ECC side .
What else can be checked to locate the missing Idoc .
Thanks.
regards
Nilesh

Hi,
a workaround - just check the function module in ECC which is invoked for posting of your IDOC..........take the output IDOC msg data from XI from SXMB_MONI and execute your function module in ECC with that data and there you will find some exception msg........just try to match any exception with the SM58 errors...then you can locate your IDOC...........
just proces the SM58 entries and you will get your IDOC in ECC.
Regards,
Rajeev Gupta

IDocs missing in Target Side after BPM process

Hi,
     We are having couple of IDOC->XI->File scenarios where BPM is designed as per the BpmPatternCollectTime standard pattern.
     The issue is like when we send 100 idocs from ISU system, and the collection process is set as say 3 minutes, we'll be getting 2 files. Here the first file will be having 92 idoc data and the second will be having only 1 idoc data. We are confused with the missing of 7 idocs in between.
      These seven idocs are getting missed in between the exception to come out of the collection loop after the first 3 minutes and the starting of the second instance which will again go on for 3 minutes.
Can anyone provide some ideas to resolve this issue???
Thanks in advance
Jayakrishnan

HI Jayakrishnan,
I understand what you are telling...but check this line from sap help...
<i><b>The system checks the deadline at runtime. If the deadline has been exceeded, the processing branch is executed for the deadline. The steps in the remaining processing branches in the block are not affected by this. In particular, note that these steps within a block are not automatically completed.</b></i>
that means along with the deadline branch the main branch is also getting executed(that is what i make out from this - pls correct me if i understood wrongly)...
if this is the case...can you give a try with the following suggestion...have a container variable with a default value....which will be set to a different value in the deadline branch(remove the exception raising from the deadline branch)...in the main branch after the append step...there has to be a switch step which checks for the value of this container variable....if it has the dead line value then raise the excpetion here...other wise donot do anything...
give it a shot...i think it is worth trying...
Thanks,
Renjith

JCo IDOC Server - some IDOCs missing

Hi All,
I have created a JCoIDOC Server to receive IDOCs from SAP through tRFC. If one or two IDOCs are sent from SAP,
my JCoIDOC server receives them properly. But if more IDOCs( say 20) are sent from SAP, my JCOIDOC server is not receiving all the IDOCs. Some IDOCs are missing. I don't know if they are lost forever.
Did any of you face this problem before?If so, please explain what is happening? what could be the reason?
Thanks and Regards,
Vijaya Gopal.

Did you ever get a solution to this?

IDoc missing in IDoc - XI - IDoc scenario

Hello!
The integration scenario is R/3 4.6C (IDoc) -> XI -> (IDoc) R/3 4.6C for DELFOR, ORDERS, ORDCHG, DESADV and ORDRSP.
Now we switched to a new XI development system and the flow is working for all message types besides DELFOR.
WE20 -> New XI Logical System Name -> DELFOR points to the new receiver port which referenced to the correct SM59 destination that is used by all other message types as well.
There is also no error in SM58 in the sending R/3 system and the DELFOR IDocs are in status 12 in WE02 but when I search the IDoc number in IDX5 on XI the IDocs are not there.
Does anybody have an idea where to find the DELFOR IDocs?
Regards, Tanja

Hello!
> IDOC staus if it is sent out from R/3 should be 03 or
> 12?
First it was 03 but as I was not able to find it anywhere I ran a report and the status changed to 12 afterwards.
> if IDOC is coming out of R/3 without any errors( sm58
> no errors) then it should come in the SXMB_MONI in XI
> as it usess th TRFC Port........
Yes, this is also my understanding but it is not in SXMB_MONI nor in IDX5.
> if it is not check the SMQ2 and SMQ! in both XI and
> R/3...it cannot go anywere else (-:
I have checked SMQ2 and SMQ1, the queues are empty in XI and R/3.
Regards, Tanja

Inbound IDOC missing some values

Hi ,
We got few fields in the IDOC which are populated at the sender side of the IDOC but when it comes to XI we dont see those fields populated in the payload at the sender. Any idea on what could be wrong. I have checked the mapping in XI and the sender has the 2 fields in the IDOC. Trying to figure out where it went wrong.

@ Srinivas - If there is problem with metadata, there will error message here is not the case.
actually if there is a field generated on the IDOC it has to come to XI in the source payload.
check this.
Idoc Payload incorrect
Edited by: Venkat Anusuri on May 18, 2009 4:46 PM

Idoc missing Legacy

Hi,
My senario is SAP sending IDOC to PI from PI to Legacy,SAP posted 30 idocs but only 28 reached to Legacy but i see evry thing ok in MONI,smq1,smq2,sm58.
What i need to do in this case help me.
Regards,
Prasad.

Hi,
As you did not precise if you did these tests, and I ask you:
in PI, tcode SXMB_MONI, check if you received 30 idocs (same figure than in ECC).
if it's not the case, your problem in ECC. So have a look on:
in ECC, tcode WE02: check that you have 30 idocs with status "03" correctly treated (or 39 if PI returned an Ack).
in ECC, tcode SM58: check this queue, even if you have a "03" status for your idoc !, coz "03" = correctly generated, but not "correctly sent to PI or received by PI"...
if the count is good in PI, do the check list providen by Shabarish
Regards
Mickael

Idoc missing

hi gurus,this is the message i got from details tab
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
EDI: Partner profile not available
System response
There are IDocs with incorrect status.
Procedure
Check the IDocs in Source System . You can get here using the BW Monitor.
Removing errors:
How you remove the errors depends on the error message you receive.
can any one help me out its urgent
cheers,
dp

DP,
Please see if the Partner Profile is maintained for the source system (Logical System - LS).
You can maintain this in T-Code WE20.
Hope it helps...
Amol
(assign Points if helpful)

XI IDOC missing segment definition in type E1LFM1M

Hi experts,
we have recently upgraded our ERP system to NW 702 EH5. As aresult a new segment definition was added to our segment type E1LFM1M ( segment def. E2LFM1M007). The problem we are havign is that our XI system is still running on NW700 and it doesnt have this segment defintion. Since the upgrade we are getting an error in transaction RFC complaining about the new segment definition E2LFM1M007 everytime we try to send a vendor from ERP to SUS using BD14. Is there a way we can deactivate the new segment definition E2LFM1M007 in segment type E1LFM1M?
Thanks,
Abdul.

Hi Abdul,
Actually it does not matter what are your systems' versions, PI can always handle an IDoc properly. All you need to do is perform the following steps in your PI system:
1. Log on to ABAP stack, go to t-code idx2, find your ECC system and that particular IDoc (I believe this will be CREMAS) and delete its metadata.
2. Log on to Enterprise Services Repository, find your SWCV where the IDoc definition was loaded, and load it again from your ECC system, then activate the change.
3. If necessary, also adjust the message mapping to use/not use the new segment. Activate your changes.
Once you have these steps completed, you are ready to retest your scenario and say goodbye to the error.
Hope this helps,
Grzegorz

IDOCs missing in XI

Similar Messages

Maybe you are looking for