IDocs Msg Types

Hi I am trying to find the applicable IDoc to use for the following processes:
Create A Delivery
Replication of Material Master
Create A Stock Transfer Order
Create a Goods Receipt
Create a Goods Issue
All of these are to be triggered in one SAP system and sent to another SAP system where the applicable document should be created.
Could you give me some pointers on the Basic and Msg Types that could be used.

Hi,
Refer this link:
http://www.erpgenie.com/sapedi/message_types_masterdata.htm
Regards,
Nithiyanandam

Similar Messages

Idoc Msg Type COND_A in MM condition transfer

Hi,
Idoc message type COND_A is used to transfer condition records from one client to another using ALE.We can use t-code MEK3 to transfer PB00 condition type .
Can anyone tell me which t-code is used to transfer condition types other than PB00 like FRA1,etc. in MM using message type COND_A?
Thanks,
Kaveri

Hi,
Pricing condition related table is A000 and to sending this data throug ALE process transaction is VK13. Go to transaction VK13 and click on "Condition information" then it will ask you for inputs. Then click on "Execute"...You would get the COND_A IDocs.
Thanks,
Asit Purbey.

CUA error: No auth iDoc msg type USERCLONE

Hi,
I've set up CUA with SolMan as central system and XI as child.
After creating a user in SolMan i get the status "distribution unconfirmed" for XI in SCUL. The iDoc is green in BD87, however in SM58 i receive the error "No authorization to send IDocs with message type USERCLONE". Nothing changes when I try manual distribution. My error searching basically leads me to http://help.sap.com/saphelp_nw04s/helpdata/en/18/89ef3bc8821d0de10000000a114084/content.htm, however the communication user that is used in the rfc SolMan->XI and XI->SolMan us setup according to those instructions.
Furthermore:
- Username and pass are the same in both systems
- RFC connection tests works in both systems
Another thing that has happened is that when I create new roles in PFCG, they don't show up in the roles list in SU01.
Anyone have any ideas?

Update: Issue resolved. Im using trusted systems with current user from SolMan to XI. I had however forgot to add the sapcuaclient role to my current in XI

Reg. IDoc errors in Mat Mas conversion using ALE/IDocs & reduced msg type

Hi Friends,
Am facing a strange situation while converting the Material Master data from 4.6b to ECC using BD10 transaction with reduced custom message type. I have reduced the standard msg type MATMAS03 using BD53 for the required field mapping both in 4.6b and ECC systems and I written the code using the exit EXIT_SAPLMV01_002 based on client req.
The situation is that in receiving system(ECC) sometimes IDocs are failing and the error shows that some fields which I have not selected in E1MARAM segment of the reduced msg type are populated with some values(ex: zeroes-0, slash-/,spaces)
(Error Msg -Blank spaces in change number 0 / are not supported). And all these coversions are scheduled as Batch jobs and by ALE setup. But when I try to send these errored out material numbers using BD10 tcode(without Batch job), they are posted successfully and the IDoc does not show the additonal fields which I have not selected. I tried to debug the errored parts conversion, but they always post successfully.
FYI, the additonal fields which are populating does not exist in the message type MATMAS03 of the sending system(100 flds) but exists in receiving system ECC(118 flds).
Please help me out..if you have any clue.. and pls let me know if you need more info about this scenario.
Thanks

Hi,
Please check the documentation in WE60 tcode and see if the fields are required to be passed...
Regards,
Nagaraj

Idoc to File scenario - recv. msg type definition

Hello,
Am developing interface for MATMAS msg type. Am new to XI.
Customer has not given the recv. file structure and it is to be defined from Sender idoc type.
Can some body guide me ohw can the recievver msg type defined by looking at the idoc type.
Regards,
Radha

Hi,
You should refer the links given above by one of the friend. Those links give you the step by step directions.
Now particular to using the receiver side Data Type. It dpends upon the receiver side file format that is expected.
1. If you need the similar IDOC structure with XML format on receiver side, then as most of above friends have mentioned, you can use the IDOC structure in mapping on target side. No need to create the Data Type.
2. BUT if you have file format and have to deal with few specific fields only from IDOC structure, then you need to create the Data Type as mentioned in the above given links. ([See page No 8 & 9|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539] )
Create the Data type and follow the steps.
Thanks
Swarup
Edited by: Swarup Sawant on Dec 29, 2008 9:28 AM

How to hide extra field in IDOC segment E1EDK01 of ORDERS MSG TYPE

HI Gurus,
We are upgrading from 4.6c to ECC6, I am facing with a prolem in my outbound IDOC for ORDERS msg type.
In the header segment E1EDK01 is having extra field HWAER in new version ECC6 and rest of the idoc remains same, can any one help me how to hide or remove the field from the header segment.
Any hint or solution will be appreicated.
Thanks
Tangudu

Hi,
If you want to remove the fields you can use. BD53 where you need to create the new reduced MESSAGE type.
Follow the procedur in attached [LINK|http://wiki.sdn.sap.com/wiki/display/ABAP/ReducedMessageTypes]
As per your question i understood. you have field HWAER in 4.6c nad 6. But the field is not sent to reciver in 4.6c.
So In another way you dont want to send this field in this case you can write a code in cusom exit to balnk this field out in ECC 6.
Hope it helps,
Shanmugavel Chandrasekaran

Relation between msg type & Idoc type

i have a X msg type which is already assigned to Y idoc type.
can I assign the same X msg type to a new Z Idoc type.
If yes, what is the effect on the old assignment?
note: Y & Z have no relation at all. both of then are two different Idoc types.

Hi,
it is a problem, If u assign a X message type to more than 1 message type, becuase message type is only identifier in the ALE or EDI configurations. Using this identifier u have to configure in the ALE or EDI.
This is one-to-one relation between Message type and Idoc type.
Reward me if it is ok.
Regards,
Subbarao

0 idocs generated for msg type cosmas

Hi everyone..
please help out with this idoc issue
I'm trying to send data with msg type COSMAS from 800 to 810 using BD16 as follows:
it just says 0 idocs generated.
I have again gone back and checked my customizations but can't figure it out.
the steps i have done are:
create and assign logical systems
open rfc connections from both c800 and c810
create model view and assign msg type in bd64 in c800.
create partner profiles in both c800 and c810.
open port from c800 .. .DO i have to open a port from c810 as well??
Some doubts I have :
do i have to do :
"Generate the partner profiles by selecting the navigation path from the main menu, Environment --> Generate Partner profiles"
from BD64 after i create the model view and add msg type COSMAS.
regards,
allwyn

HI
no, i have not done anything relating to bd64 in c810 ..that wasn't mentioned in the notes I am following .. Do I have to repeat the same steps like I did in c800?

MSG TYPE for oppurtunity in CRM for IDOC

Kindly help.
suggest any badi as welll. do we use same msg type as for bp???

Hi Abhinav,
I have gone through your query. If i am correct, i guess you are needing the Idoc with which the Opportunity data can be replicated. If that is the case make use of CRMXIF_ORDER_SAVE_* Idoc which is to transfer the Business transaction data.
In this you can make use of segment E101CRMXIF_OPPORTUNITY_X for sending the opportunity data. If you are not looking for this sort of an information kindly elaborate your query bit more.
I hope this helps.
Regards,
Venkat

Std Msg Type and Idoc Type to send multiple characteristics for equipment

Hello Experts,
I have the requirement to send all the assigned characteristics linked to an Equipment or linked to a Material, along with the all possible values BUT require only standard Message Type and Idoc Basic Type.
I found Message Type = CHRMAS and Idoc Type = CHRMAS04, BUT it contain information of ONLY one characteristic, not solve my objective (multiple characteristics in one Idoc)
Will you please provide me any standard Message Type and Idoc Basic Type that solve my above requirement?
Thanks in advance,
akg

Hello Experts,
Can you at least tell me, is there anything standrad that can fulfill my above requirement?
If not then I will proceed with custom developments; and in this case is there any complexity to transmit the custom Idoc?
Thanks in advance,
Thanks & Regards
akg

IDOC message type reduction

I have a PLM system that will be receiving Material Master Data from multiple R/3 systems.
I will need to create a reduced message type for MATMAS.
Need confirmation of steps:
1. I create a reduced message type ZMATMAS in the PLM system (BD53)
2. Activate change pointers for ZMATMAS in PLM (BD53)
3. Generate transport request for ZMATMAS in PLM (BD63)
4. Import reduced message type into all the R/3 systems (STMS)
5. Verify distribution models in R/3 systems (BD64)
6. Send material from R/3 systems to PLM system (BD10) using reduced message type
The question I have about these steps is whether I should create a reduced msg type in all the R/3 systems (multiple times) or is it ok to do it one in PLM as described above?
Please let me know if steps are correct?

Hi Raynald LaGuerre ,
1.To create a new message type, follow these next few steps:
     Enter transaction WE81 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> Create logical message type)
     Choose Create logical message type by double clicking on it
     Click on change icon to enter change mode
     Click on New entries to add a new type
     Enter the required message type
2.WE82--LINKING OF MSSAGE TYPE TO IDOC TYPE(DISPLAY).
Rgds
Sree M

Two msg type from one file

Hi
we are creating file-IDoc integration scenario, for that we are using abap mapping. we have to map single file to 2 msg type . Any ideas how to achieve that
Thanks in advance
Swatantra

Hi Swatantra,
In your message mapping,
go to the messages tab, and there you can add your Message types and then continue on with your mapping !!!
Also suggest you go through this SAP Help:
http://help.sap.com/saphelp_nw2004s/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/4f/ef761a5ecfb1418b79896e10fe4c57/content.htm
and this link to a similar Discussion:
Multiple Mapping programs in one Interface mapping
Regards,
Abhy
Message was edited by: Abhy Thomas

How to chang the idoc message type

Hi,
I want to change the idoc message type...because the idoc has the status 51...pls advice how to change
I have tried it from we81 .......but i cant open the msg type ...when i double click on it.
Regards,
Somenath

Hi,
This may help u
Steps To Create Custom IDOC
1.Create Segment Type (WE31)
Go to Transaction code WE31
Enter Segment type, click on Create
Give Description
Enter the Necessary Fields & Data Elements for those Fields.
Save the Changes.
2.Create Idoc Type (WE30)
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
3.Create Message Type (WE81)
Go to transaction code WE81
Change the details from Display mode to Change modenAfter selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press EnternClick New Entries to create new Message Type
Fill details
Save it and go back
4.Assign Idoc Type to Message Type (WE82)
Go to transaction code WE82
Change the details from Display mode to Change moden After selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Regards
Seshagiri

How to change the default IDOC basic type from CREMAS05 to CREMAS04.

Hi All,
How to change the default IDOC basic type from CREMAS05 to CREMAS04 when sending Vendor Master Data.
When I generate partner profile, the system will add the latest version of IDOC type which is CREMAS05 to the Outbound message. In my project, I'm asked to use CREMAS04.
I want to use BD14 to send master data directly, but the program will generate IDOC using CREMAS05. Is there a way that I can change it to CREMAS04? And also for using Change Pointers, I want to use the report RBDMIDOC, but i have the same problem.
Thanks
Sai Krishna

execute WE20 and edit the outbound parameters
here is a pretty good example: http://documentation.softwareag.com/webmethods/sapr3_gateway/sap231/pages/sapdist.htm
Edited by: Jürgen L. on Sep 7, 2011 9:49 PM

IDOC message type for "Site" in SAP Retail module?

Hi All,
We have the need to transfer master data (through master data change pointers) of Retail Sites within the SAP Retail module (transaction: WB01, WB02). Does anyone know if there's an IDOC message/type already associated with this? Thanks in advance for your help!
Cheers,
Matt

Hi,
please read SAP notes 892103 and 551035.
The correct IDOC type should be FIDCC1 / FIDCC2.
Best regards,
Andreas

IDocs Msg Types

Similar Messages

Maybe you are looking for