Idocs not being send out from BD14

HI,
I am trying to send out the vendor records out of SAP usong BD14, but the idoc is not being created. I debugged the tcode and found out that it was erroring out due to the model not being found. I checked the model and found that the data filter on the class is activated.
In the Tcode BD14 I was not populating the class field.
Can you please let me know as to what will be the suitable value for this field class
Thanks
Nikhil

Hi Nikhil,
check the following configurations for master data distribution.
           We81 ( message type)
           We30 ( idoc type)
           We31 ( segment type)
           We82 (linking message type and idoc type)
           We21 (creating port)
           We20 (partner profiles)
           Bd64 (Distribution model)
           Bd14 (Vendor master)
Regards,
Nagaraj

Similar Messages

Avoid emails being send out from the staging environment

We would like to avoid that users of CRM OD get emails which are triggered from the Staging or Training environment. Is there a way to check for the environment and pod in an expression? Any best practices on this?
Regards,
Ernst-Jan.

Hi,
We will not be able to find in any expression builder. I feel like to Inactive all the Action Items in the WFs
Regards,
Srini

How do I set MacMail to always send out from the same account?

I have multiple email accounts for my business but have them set to forward to my iCloud address (because I also have an iPad and cannot get my business mail on that unless it's forwarded). When I reply to business messages I always want to use the business address and only occasionally want to use the iCloud address. Without changing the send out address EVERYTIME, which is what I'm doing now, is there a way to configure MacMail so that it will ALWAYS send out from my business address unless I specify otherwise?
I looked at Help and it says that you can set that preference in Composing, but it doesn't seem to work.

.mac/mobileme/iCloud is only one of many options you can use for Mail.
In fact iCloud is shifting to mostly 10.7.2 or later only which your G5 does not support.
To determine if you can still use iCloud for Mail, read this tip.
POP account simply are either pop.mac.com, mail.mac.com, or mail.mobileme.com, or mail.me.com or pop.me.com.
smtp is the send mail server alone. And issues with sending mail to a non-internet juice provider typically happen if your internet juice provider blocks any sendmail servers that aren't authenticated. To solve that problem you need password authentication, and either a port 587, 2626, or 2662 with a username of your e-mail address, and password used for checking mail, and the sendmail server of your choice that knows of your e-mail address in your mail settings.
Using POP is great if you want to store your mail only on your machine. Otherwise it is better to use IMAP which stores on the server, and lets you copy information up to your machine as you desire.

My photos are not being rec'd from either Adobe photoshop 10 or 11???

My photos are not being rec'd from either Adobe Workshops 10 or 11? Help. I have always been able to send via emai photos from Adobe 10 never have I been able to send them thru 11??/

Hello dbe.
Please check to see if a borderless paper size has been selected before printing.
If borderless printing is enabled, you may experience a cut off on the outside areas of the image. This is the only way that an edge to edge bleed can be done.
To retain the entire image, the bordered option would have to be used for printing.
Please visit the following link below to contact our support group for additional assistance.
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HT1454 why i can not get video out from my ipod touch after i did the upgrade

why i can not get video out from my ipod touch after i did the upgrade

why i can not get video out from my ipod touch after i did the upgrade

HT1454 Can not get video out from my ipod touch 3rd gen. Any ideas? It should nt be diffiicult to do this on the 21 st century, or not?

After having spent EUR 130 on cables from apple, i still can not get video out from my ipod touch 3rd gen. Any ideas? It should nt be diffiicult to do this on the 21 st century, or not?

Backing up an iOS device will copy some data to a backup file within iTunes, but this excludes all media. You can also transfer iTunes Store purchases from the iDevice to iTunes but, without using a third-party tool, nothing else. As long as you do not sync the iPod with your new library, the media that's on it will remain ... for as long as it keeps functioning, is not lost, stolen, eaten by the dog, ...
You may also have an option to recover your previous library from your old laptop; as long as its hard drive isn't fried, a computer repair store or technician may be able to extract the drive, mount it in an external enclosure, and copy your data to another PC. Whatever you choose, there is no real alternative to having all your media on your computer, managed by iTunes, and regularly backed up to another device/location.

IDOC FAILURE while sending data from ZEB_HCm systen to ZRA-EREC SYS

Hi
Experts
I am having idoc failure while sending data from HCM SYSTEM to EREC systems.
From that Data records i found the failure recored containing PERNR.
and from status record the
ERROE IS : No status information available for object CANDIDATE
Message no. HRRCF0001073
usually i used to run PFAL for these king of issues , when i tried to run PFAL for the PERNR it is giving the same errroe,
So pls suggest how to send the data to resiolve this .
Regards
Suresh

Hi Nitin,
The IDOC when came in Erec system is in error status ( 51).
When i saw the data records, only pernr were mentioned.
Then i send the idoc thru PFAL again by sending all information as O-C-S-P.
Still it is giving me the same error.

Idocs not being sent from 4.6c to 6.0 system

Hello,
I am sending Idocs from a 4.6c R/3 system to a 6.0 R/3 system. I can see that the Idocs are being created and sent to port OK (status 03) in the 4.6c system but not able to see the Idocs in the 6.0 system.
Actually, there are 2 cases but in both cases I am using the same function module 'ALE_DISPUTE_CREATE' to send the Idocs but only in the first case Idocs are received in the 6.0 system. I checked the parameters of the function module in both the cases and they are same in both the cases with the only difference being the values.
One more difference is the way the data is prepared . In the first case, 'FDM_CASE_DATA_PREPARE' is used to prepare the data and in the second case I am creating the data using normal data extraction and internal tables after which I pass the datas to the function module 'FDM_COM_CASE_CREATE' which is also used in the first case.
'ALE_DISPUTE_CREATE' is within this function module.
I checked the queues in both the systems and did not find anything stuck there. One more interesting case, If I copy the Idocs which are not being sent using WE19, the Idocs are being sent correctly and received correctly in the 6.0 system.
Please advice.
Thanks,
Laxman.

Hi Laxman,
You said that the Status of the IDOC at sender side is '03', have you checked the status of IDOC in reciever system. Check the details of DOC using WE02. Use BD87 to Monitor the messages issued during IDOC processing. These messages will help you to reach to the exact problem.
Regards,
Vaishali.

R3 - XI - Auto-ID:How to check result of Idocs sending out from R3 in aii ?

Hi,
I am implementing the SAP RFID-Enabled Outbound Delivery Process, the installation and configuration guide have been provided from SAP; able to d/l from SAP web site. Right now, I have 3 servers already installed components for this scenario:
1.SAP R/3
2.SAP XI 3.0;
3.SAP Auto-ID(Auto-ID) v2.1
Currently, I can send Material Master Idocs out from R/3, using t-code: AIDMM. And then I check the inbound Material Master Idoc in SAP XI, the status of Inbound Idocs is "Processed Successfully" and Ack. Status is "Still waiting acknowledgment". I have the following questions:
1. Why does Ack. Status is "Still waiting acknowledgment"? Which server should send the acknowledgment back to it?
2. How do I check the result in Auto-ID server? It suppose to have the submitted Material in Auto-ID server, doesn't it? I tried to check data in Auto-ID Cockpit->Master Data->Product and then click 'Go' but no result display.
Please advise as the questions above. If you want more information please let me know
Thanks,

Hello,
<u>Point 1 :</u>
You have "Still awaiting ack" until the receiver send you an acknowledgement.
If you don't want ack you can customize the table IDXNOALE in XI (SE12).
I don't know Auto-ID but if it is a SAP system like R/3, you can use the SAP documentation named : HowTo_IDOC_Ack.pdf to send acknowledgment.
https://websmp201.sap-ag.de/~sapdownload/011000358700004003762004E/HowTo_IDOC_Ack_20040817RR.pdf
<u>Point 2 :</u>
If transaction "we02" exist you can see your IDOC.
Regards,
Chris
Message was edited by: Christophe DUMONT

Fill in form created in Adobe 8 (Mac) and then trying to send out from PC with adobe 9 pro

I created a form using adobe acrobrat 8 pro on a mac (everything works and we have used in the past). I need to send it out from a PC which has adobe acrobat pro 9. I can open the form, view it and use the distribute feature (via email option). Then I send it out and when we test the completed form coming back to the email on the PC (using a submit button option), it opens the PDF file, you can view the filled in data on the PDF however the dialog box that normally opens asking if you want to download or import the data does not appear, not even the form tracker dialog box appears - nothing happens. You can't seem to do anything with the data from the form. You can only view it. We need to be able to collect it in one file, and then export to a CSV.
Is there some compability issue between forms created between two platforms, and two different versions?
Am I missing a step on a PC. I am not very familiar with a PC's and it doesn't seem to be as drag and drop oriented as a mac.
Do I need to rebuild the form on the PC using adobe acrobat pro 9?

Please post this in the Acrobat support area, you'll get a better answer!

Error: Not able send mail from OWA 2010. When I send mail, the mails go to Drafts Folder.

Error: Not able to send mail from OWA 2010. When I send mail, the mails go to Drafts Folder. I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send.
Screen Shot: http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
Scenario: I have below configuration of exchange 2010 server Setup:
1. Windows Domain Controller with Global Catalog on Windows Server 2008 which only for Windows 2008 Server Native.
Server Name: WDC2010
Domain: Blazex.Com
2. Hub/Client Access Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Hub/Client Access Exchange role servers.
Server Name: HC2010.blazex.com (This is not a Addition Member server or ADC)
Role: Hub and Client Access Server.
3. Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Mailbox Exchange role servers.
Server Name: MBX2010.blazex.com (This is not a Addition Member server or ADC)
Role: Mailbox Server.
4. 2nd Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Mailbox Exchange role servers.
Server Name: 2MBX2010.blazex.com (This is not a Addition Member server or ADC)
Role: Mailbox Server.
5. Client Windows 7: It is installed on Windows 7 Ultimate Workstation. As per Microsoft recommendation, I have just installed Windows 7 and then join this computer to Blazex.com.
Workstation Name: WIN7.blazex.com
Role: Workstation
Error Description: I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send.
Screen Shot (Same As Above): http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
I don't know what I am missing but I think there is some configuration I need to do on Hub/Client Access Server (HC2010). I tried to access the mailbox on XP Client system through OWA. I get the same problem as Win7.
Can someone please help me on this?
Thanks and Regards
Shambhu

Hi Subhash,
I have done the troubleshooting but I didn't find any problem at server side. I will send you mail also with all EXBPA report and as well DC, HC and Mailbox servers' Application Log and System Log.
Below are the questions's answers which was asked by you:
1.     Please check whether you can send email via Outlook.
I am not able to open the MS Outlook. Please check all details in this thread : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
2.     Please run EXBPA to have a health scan.
I have run the EXBPA and didn't see any critical Problem. I have took the screen shot and report. Please have a look in below screen shot link:
a. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/EXBPA.docx                                                                            - Final Report
b. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.BaseLine.200906270226501077.data.xml                        - Baseline Health Check
c. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Connectivity%20Test.200906270223318201.data.xml      - Connectivity Check
d. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Health%20Check.200906270125477730.data.xml            - Health Check with 2 Hr. Baseline option
e. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Permission%20Check.200906270224343377.data.xml      - Permission Report
The error which I received in EXBPA, that allready ignored by you and told that it is bug in EXBPA. Have a look here: http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/d4bb03bb-db84-4a8b-83ba-19937d7dcacf
3.     Please check application log, whether any error event logged there. They could come from ADAccess related error or etc.
I didn't see any ADAccess event on the server. For this I have left my lab PC open and I will check again.
4.     We find that if mail .que gets corrupt, then this issue will occur, please try to move the affected user to another store and then test the issue.
I am facing this problem with all users (7 users). Anyway I moved one user from one server Mailbox Database (2mbx2010) to Other Server Mailbox Database (mbx2010). After that
a) Rebooted the Workstation
b) Login successfully with same user.
c) Delete the Old MS Outlook Profile
d) Create New profile for same user without any problem.
e) Tried to login in MS Outlook and got the same error. : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
f) Open the OWA successfully for Same user.
g) Tried to send mail but again mail went to Drafts Folder.
5.     I noticed that you test the issue after you close outlook. I recommend you to reboot your pc and then access
mailbox via OWA to test the issue.
I tried you suggested option, but sorry it also couldn't help.
6. You also check your disk space.
     All Servers have Enough Disk Space. Check the EXBPA Report.
7. You may run EXTRA to get log information for further troubleshooting.
Need more time for this.
8. Please save application log, system log as *.evt file, then send them with EXTRA,EXBPA report to [email protected] .
   I have sent it as your mentioned mail address OR, you can get the mentioned log from below link also:
   a) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_APPLICATION.evtx           - DC/GC Application Log
   b) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_SYSTEMEVENT.evtx          - DC/GC System Log
   c) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_APPLICATION.evtx              - Hub/Client Application Log
   d) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_SYSTEM.evtx                      - Hub/Client System Log
   e) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_Application.evtx                - Mailbox Application Log
   f) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_System.evtx                      - Mailbox System Log
There will be some error log you will be that the system is not able to communicate with DC/DC, MBX or HC at everyday around 3 AM or some time 6 PM Evening also. These error came because I have installed VM on Windows 7 Workstation and after 45 min or one hrs. if I don't work on PC, then pc goes to sleep. so you may ignore these alerts.
I hope my answer will give you some clue and I expect more help from your side.
With Best Regards
Shambhu Sharma

Invitations not being sent out on Calendar Server 6.3

We would be grateful for any help on this. We can give further details if needed, please just let us know.
Thanks very much.
Issue:
To our customers the calendars server appears to be fully operational and without error. However, when a customer creates a new event and invites other people to attend, no invites are sent out. The event creator, however, believes all is in order as no error messages appear and the list of invitees appears on the event. This was working recently. We have looked for things which have changed (e.g. disk space, size of files, corruption, recent patching, licenses expiring, etc) but have not yet found anything that has changed.
Some details of our system:
./cal/sbin/csversion
Oracle Communications Calendar Server 6.3-27.01 (built Feb 15 2011)
SunOS xxxx 5.10 Generic_142909-17 sun4u sparc SUNW,Sun-Fire-V440
In /var/opt/SUNWics5/logs/watcher.log , we get these notices and errors when we restart the service.
[20/Feb/2012:12:35:56 +1300] (Notice) Received request to restart: store admin http
[20/Feb/2012:12:35:56 +1300] (Notice) Connecting to watcher ...
[20/Feb/2012:12:36:00 +1300] (Notice) 7698
[20/Feb/2012:12:36:00 +1300] (Notice) Stopping http server 7704 ..... done
[20/Feb/2012:12:36:02 +1300] (Notice) Stopping http server 7705 ... done
[20/Feb/2012:12:36:02 +1300] (Notice) admin server is not running
[20/Feb/2012:12:36:02 +1300] (Notice) Stopping store server 7700 ............................................................... timeout
[20/Feb/2012:12:37:03 +1300] (Error) Cannot stop server store with SIGTERM, now retrying with SIGKILL
[20/Feb/2012:12:37:03 +1300] (Notice) Stopping store server 7700 ..... done
[20/Feb/2012:12:37:05 +1300] (Notice) Starting store server .... 7718
[20/Feb/2012:12:37:05 +1300] (Notice) Checking store server status ..... ready
[20/Feb/2012:12:37:07 +1300] (Notice) Starting admin server ....Watched 'csadmind' process 7725 exited abnormally
7725
[20/Feb/2012:12:37:08 +1300] (Notice) Starting http server ....[20/Feb/2012:12:37:08 +1300] (Notice) Received request to restart: store admin http
[20/Feb/2012:12:37:08 +1300] (Notice) Connecting to watcher ...
... 7727
[20/Feb/2012:12:37:13 +1300] (Notice) 7698
[20/Feb/2012:12:37:13 +1300] (Error) store failed twice in 600 seconds, will not perform restart
Watched 'csadmind' process 7844 exited abnormally
What we've done:
We have run db_verify and csdb -v check on the databases. ics50deletelog.db did have corruption, so we fixed that by using db_dump and db_load to export then import the databases.
We also purged the ics50deletelog.db database using cspurge afterwards when the dump and load didn't seem to have had an effect.
We tried putting the log level up in the /opt/SUNWics5/cal/config/ics.conf , but didn't get any more details when restarting the service (through /etc/init.d/sunwics5 restart)
Before we did the db_dump, db_load and purge:
Calendar database version: 4.0.0
Sleepycat Software: Berkeley DB 4.2.52: (December 3, 2003)
Total database size in bytes: 1465503744
Total number of calendars: 14964
Total number of events: 830842
Total number of tasks: 17351
Total number of alarms: 57181
Total number of gse entries: 9
Total number of master component entries: 24100
Total number of deletelog entries: 1779967
Total logfile size in bytes: 79262
Session database version: 3.0.0 [BerkeleyDB]
Total database size in bytes: 0
Total logfile size in bytes: 0
Counter database version: 1.0.0 [Memory Mapped Files]
Total database size in bytes: 0
After the db_dump, db_load and purge:
Calendar database version: 4.0.0
Sleepycat Software: Berkeley DB 4.2.52: (December 3, 2003)
Total database size in bytes: 1201864704
Total number of calendars: 14964
Total number of events: 830845
Total number of tasks: 17351
Total number of alarms: 55116
Total number of gse entries: 9
Total number of master component entries: 24100
Total number of deletelog entries: 1779967
Total logfile size in bytes: 5251612
Session database version: 3.0.0 [BerkeleyDB]
Total database size in bytes: 0
Total logfile size in bytes: 0
Counter database version: 1.0.0 [Memory Mapped Files]
Total database size in bytes: 0
Thanks again.

Sounds like we talking about 'Event Invitations Notifications'. These are the notifications that gets sent when some one invite you to an event. Whether you receive the notification or not depends on your preference that is stored in ldap. This can be set using the Convergence by navigating through Options-> Calendar -> Notifcations (Check "Notify me via email of new invitations or invitation changes"). The actual ldap attributes that gets stored in user's entry is below.
icsExtendedUserPrefs: ceNotifyEnable=1
icsExtendedUserPrefs: ceNotifyEmail=[email protected]
In the following cases, the user (attendee) will not get notifications even if the above preference is set.
a> Creating an event with attendees in the past. CS6, by default, suppresses notifications for past events. You can enable notifications for past events by setting the config "ine.pastnotification.enable" to "yes" in ics.conf
b> If the client creating the event requests server not to send notifications. (smtpNotify wcap param for storeevents.wcap). Outlook Connector uses this wcap param, so you won't get server notifications for the events invited using Outlook Connector. Outlook Connector sends it's own notifications directly.
I think, you are looking for these kind of notifications. The process responsible for sending these notifications is "csadmind" on the Frontend. So, you need to check admin.log on the Frontend to see if it is sending notifications or not.
Edited by: dabrain on Feb 21, 2012 9:26 AM

IDOC :: how to send data from Custom Infotype in SAP HR to third party

Hi,
I have created one custom Infotype by number 9020. How to send data from this infotype to third party system and also change pointers need to trigger for this infotype.
Please help me in doing it.
I am using one Custom Message type ZTALENT and Custom Idoc Type ZTALENT.
                                                                                ZTALENT                        Talent Management
5 E1PLOGI                        Header for an HR Object (Master Data or Organizational Data)
5 E1PITYP                        HR: Transported Infotypes and Subtypes for an Object
ZPUSER                         User base Data File
                ZPERSON                        Personal Information File Segment
                ZPOST                          Position File
                ZOPE                           Overall Performance
                ZPWORK                         Outside Work Experience
                ZPEDUC                         Education Details of Employee
                E1P0000                        HR: HR Master Record Infotype 0000 (Actions)
                E1P0001                        HR: HR Master Record Infotype 0001 (Org. Assignment)
                E1P0002                        HR: HR Master Record Infotype 0002 (Personal Data)
                E1P0016                        HR Master Record: Infotype 0016 (Contract Elements)
                E1P0022                        HR Master Record: Infotype 0022 (Education)
                E1P0023                        HR Master Record: Infotype 0023 (Other/Previous Employers)
                E1P0041                        HR Master Record: Infotype 0041 (Date Specifications)
                E1P0105                        HR: HR Master Record Infotype 0105 (Communications)
               ZE1P9020
                ZPLANG                         Language Details
                ZACTION                        Actions Changes
Regards,
Krishna

Hello Shankar,
         Technically TEMSE files are read by calling the following 3 function modules in sequence,
              1) RSTS_OPEN_RLC or RP_TS_OPEN: open the temse object
              2) RSTS_READ : read the object
              3) RSTS_CLOSE: close the object
Regards,
Rajesh

User temp tables not getting cleaned out from tempdb?

Im seeing what looks like temp tables that are hanging around in tempdb and not getting cleaned out.
This is SQL 2008
SELECT * FROM tempdb.sys.objects so WHERE name LIKE('#%') AND DATEDIFF(hour,so.create_date,GETDATE()) > 12
Im seeing about 50 or so objects that get returned and they are user_table and some of them have create dates of several days in the past. Now I know users do not run processes that take that long, so why are these objects still hanging around?
TempDB gets reset after a server restart, but other than that, how long are these things going to hang around?

A local temporary table scope exists only for the duration of a user session or the procedure that created the temporary table. When the user logs off or the procedure that created the table completes, the local temporary table is lost.
You can check the below blog for more information
http://sqlblog.com/blogs/paul_white/archive/2010/08/14/viewing-another-session-s-temporary-table.aspx
--Prashanth

Not being offered update from Build 10041

Despite trying both Fast and Slow settings and checking at least once per day for several weeks, I am not being offereda ny update from 10041.
Additionally, I would like to get any update as an ISO so that I can relocate testing from a laptop to a desktop machine that is configured with dual scanners and printers directly attached.
Suggestions please as to what I should do.
Thanks

Despite trying both Fast and Slow settings and checking at least once per day for several weeks, I am not being offereda ny update from 10041.
Additionally, I would like to get any update as an ISO so that I can relocate testing from a laptop to a desktop machine that is configured with dual scanners and printers directly attached.
Suggestions please as to what I should do.
Thanks
Just today a new build 10074 has been released.
Its ISO is also available to download.
http://windows.microsoft.com/en-us/windows/preview-iso-update-1504

Idocs not being send out from BD14

Similar Messages

Maybe you are looking for