Idocs not coming to XI

Hi,
In our landscape developers are trying to send Idoc from R/3 to XI system.
We have created RFC_XI as RFC connection, which they are using to trigger IDoc from R/3 to XI. Now IDocs are getting triggered from R/3 without any error, but they are not coming to XI.
Now when I checked Inbound queues in XI and found that all queues start with XBTI* are stuck with SYSFAIL error.
Through SXMB_ADM I have tried to register and activate queue for XBTI* but it gives error as below:
Error while activating queue XBTI*
Message no. XMS_ADM610
Can anyone help me regarding this so that IDocs can be processes between these systems.
How can we see wats the issue while activating Queues?
Is there anything else needs to be configured between these two systems?
Thanks & Regards,
Manish

Hi,
First of all thanks for so quick reply.
I have checked at XI Side:
In IDX2 in loaded meta data, two types of Idocs are showing
ORDERS02 and CREMAS01
In IDX1, Partner port and RFC have been configured.
at R/3 side:
RFC is checked its working fine.
Using WE20 and WE21, Partner profile and port been configured already.
In SMQS below is the status:
<R/3 Client> RFC_XI R 10 60 INACTIVE 0 <R/3 HOST NAME>
Register the destination in QOUT scheduler (SMQS) and make it as active
Destination is there (as per above) I hope entries are correct but its showing INACTIVE. How to activate it?
Select the queue from WEOUTQUEUE transaction and start the queue processing; now you can see that your XI starts receiving the Idocs
In WEOUTQUEUE when trying to see IDocs using Reciever Port as RFC_XI its showing nothing.
While I checked sent IDoc status using WE05, previously it was taking port as RFC_XI for sent IDoc but now its taking port SAPID6 after I defined port in XI for R/3 using IDX1.
For SYSFAIL Status, further message is as below:
XI restart in qRFC not allowed
Any more ideas or help? Will appreciate if anything step wise can be refer to check and rectify this error.
Thanks & Regards
Manish

Similar Messages

IDOC not coming in status 30 for collecting idocs

Hi All,
We have a requirement in which we need to collect idocs and send together.
To achieve I am making Collect idocs in Partner profiles so that it goes in status 30 and hence I can run program RSEOUT00 to make it status 03 and hence write in file as a group of idocs.
Now inspite of making collect idocs in partner profile, its not coming in status 30 but directly coming in status 03.
Please let me know what may be the reason for the same.
Thanks,
Vivek

Hi vivek,
If you have set the Collect Idoc option in partner profile then the IDOC's will be collected , irrespective of kind of port you are using and the packet size doesn't matter in this case.
It seems to me that the program RSEOUT00 is already scheduled in your system.
Can you check in SM37 , by putting the program RSEOUT00 and check if any user has scheduled the program.
Hope this helps.
Harry

IDOC in 03 staus but not coming to PI system..

Hi Experts,
I am working on IDOC to IDOC scenario.All of the IDOCs are in 03 status in R/3 system but some of the IDOCs are not coming to PI system.I checked SM58 also but its fine.
Should it be in 12 staus?
Is it possible that IDOC in status 03 can reach to the target system?
Please reply it asap.Its urgent.
Regards,
Vikram

Hi Vikram,
First of all, bd75 is only for status conversion. This means, that only IDoc statuses are changed, based on the status of the RFC call. IDocs are not despatched again by this transaction.
Secondly, you might want to check the EDI Port that is assigned in the partner profile, if it is pointing to the correct target system.
Finally, if target system is OK and you don't find anything in sm58 in sender system, then you should go to smq2 in PI and you should find your IDocs there, waiting in a blocked queue.
Hope this helps,
Greg

Idoc status 03 in SAP but in XI idoc not showing

Hi Experts,
in my SAP to file scenario, idoc is created successfully with status 03, but idoc is not coming to PI.
It is not happening always. some times, idocs are missing. But not able to find any error in PI.
Please guide me how to get the missed idoc.
Thanks,
Swapnashree

this is old interface and it only gave issue this time. In ECC side, when I checked, out of 4 idocs one idoc is with 03 status and other three were with 39 status.
But all in green status. No error.
RFC destination and all are correct.
Actually I am not able to see the complete error text in TRFC . that message class is not maintained. Our functional team informed that they added XX text and re import idoc and it worked. Please suggest.

IDOC Message coming from R/3 system to XI , but waits in Qeue

<b>IDOC Message coming from R/3 system to XI , but waits in Qeue</b>
XI doesn't send the message FTP receiver.In XI sxmb_moni the "c" column contains green flags that mean "message scheduled on outbound side".
In smq1 It writes "SYSFAIL" means "Password logon no longer possible - too many faile"
But I use "anonymus" in FTP adapter. Which password is this, which component is related with this error.
How can I do?
thanks

Hi Cemil,
it may be that the FTP server where you want to send your output file does not accept anonymous connections.........so just get the username and password of that FTP server, which has access to do FTP to that machine, for doing ftp to that machine, then your output msg will be FTP to your target FTP server........
Thanks,
Rajeev Gupta

0fi_ar_4 netduedate(netdt) value coming in RSA3 but not coming in BI PSA

Hi all,
i am using 0fi_ar_4,
netduedate(netdt) value coming in RSA3 but not coming in BI PSA, in BI PSA there is 10-12 do cument there where netduedate is null while for same document we are getting the netduedate running from transaction RSA3, how?
Thanks.

Hi,
I found the problem, i have write a user exit in data sourc e in ecc, i am getting value in rsa3 but not getting in BI PSA becaue ise there is 20000 KB limits for per info package load request i.e. idoc size, as its fixed, i did change little in my user exit at ECC.
thaks

Mapping Condition issue, Value not coming in multiple segments.

Hi All,
File to Idoc scenario.
My file looks like below.
HD 89650 28/01/11 "Presciber tan"
AF "disc-rsn"
RK "007287001" A
KE disc-code "007287"
KE addr-num "001"
DF w-phone "03 98483299"
AF "drs"
RK "007287" A
KE dr-num "007287"
DF affil "OPSM"
DF country "0"
AF "disc-rsn"
RK "dr-addraddress-1 17287|1EN" A
KE disc-code "008287"
KE field-name "address-1"
KE element " 1"
T 16
Condition:
I have a condition where I need to create an Idoc segment Z1disc when row - "AF "disc-rsn"" exists.
For the filed "Z1disc-CODE", I need to pass the value when row "KE disc-code" exists,
Result:
From my file, AF "disc-rsn" exists twice, so I created 2 Z1disc segments.
Coming to the field "Z1disc-CODE", the value "KE disc-code" exists twice in the file. After mapping, the value is coming only once in the first segment. The field "CODE" is not coming in the second segment like below.
Idoc
-- Zdisc
--- Lang -- E
--- Code -- "007287"
---Zdisc
Lang -- E
When the check the display queue, it is showing like below
SUPPRESS
007287
007287 -- (Context)
008287
008287-- (Context)
It showing correctly from display queue, but the value are not populating except in first segement.
For your information, After content conversion, my source xml will look like below.
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_Optum xmlns:ns="http://luxottica.com/SAP_CRM/DirectSales/OptomDiscount">
- <RecordSet>
<Row>HD 89650 28/01/11 "Presciber tan"</Row>
</RecordSet>
- <RecordSet>
<Row>AF "disc-rsn"</Row>
</RecordSet>
- <RecordSet>
<Row>RK "007287001" A</Row>
</RecordSet>
- <RecordSet>
<Row>KE disc-code "007287"</Row>
Kindly help me, I'm trying all the options and it is not working.
Is there anything I need to change in Source structure?
Thanks
Deepthi.

Hi Aravind,
Here is my Source message.
<?xml version="1.0" encoding="UTF-8" ?>
- <MT_XIOptum>
- <Header>
<HRow>HD 89650 28/01/11 "Presciber tan"</HRow>
</Header>
- <Detail>
<Row>AF "disc-rsn"</Row>
<Row>RK "007287001" A</Row>
<Row>KE disc-code "007287"</Row>
<Row>KE addr-num "001"</Row>
<Row>DF fax-num ""</Row>
<Row>DF in-out "I"</Row>
<Row>DF phone-2 ""</Row>
<Row>DF post-code "3108"</Row>
<Row>DF provider-num "4349201J"</Row>
<Row>DF rec-stat "A"</Row>
<Row>DF w-phone "03 98483299"</Row>
<Row>AF "drs"</Row>
<Row>RK "007287" A</Row>
<Row>KE dr-num "007287"</Row>
<Row>DF affil "OPSM"</Row>
<Row>DF country "0"</Row>
<Row>DF descript "KK"</Row>
<Row>DF rec-stat "A"</Row>
<Row>AF "disc-rsn"</Row>
<Row>RK "dr-addraddress-1 17287|1EN" A</Row>
<Row>KE disc-code "008287"</Row>
<Row>KE field-name "address-1"</Row>
<Row>KE element " 1"</Row>
</Detail>
- <Trailer>
<TRow>T 25</TRow>
</Trailer>
</MT_XIOptum>
Row> -> [removeContext] ->[ equalsS "disc-rsn" ] -> [createIf] -> <Zdisc>
This Part is working.
<Row>> startWith2>IF
KE disc-code-->THEN > removeContexts>SplitbyValue>SUBSTRING>Code.
When I check the display queue at Code. I'm getting the below values.
SUPPRESS
007287
007287 -- Context change
008287
008287-- Context Change
Only 007287 is displaying in FIrst segment "Z1Disc" and second value "008287" not coming in second segment "Z1Disc".
Anything is wrong?

Business System Not coming up in configuration

Hi All,
I am new to SAP XI.
I was trying to create a scenario for transfering the data from IDOC on to an flat file.The business system which I created in SLD is not coming up while assigning the same in the configuration part.
I had the following doubts:
1.When the IDOC is send from the ECC system the business system needs to be configured to ECC,right?
2.If the above statement is true, can you please suggest the reason why it is not coming up in the configuration part?Is there any way to find what the reason would be?
Regards,
Rupesh.

Hi,
Business system needs to be created in XI SLD.
You have to done following configuration for Idoc scenario:
- Sender system:
SALE (define logical system, model configuration etc) /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
- XI system
SM59 RFC destination for sender system
IDX1/IDX2 port and metadata.
business system configuration on XI SLD
Regards,
Gourav
<i>Reward points if it helps you</i>

Error not coming to my inbox

Hi all,
I'm creating a outbound IDoc. And for error handling workflow.. I created a organization structure and assigned users. I gave this position number in the partner profile in post processing permitted agent.
But when the Idoc is in error, this is not coming to my inbox.
Can someone please help me with this..
Thanks in advance.

Here you need to be careful,
if the agent assignment is not maintained properly, there may be a chance everyone in the organization will get the item.
I hope you have created a single workitem for error handling. goto additional data-> agent assignment-> maintain. make sure the attribute is defined as general forwarding allowed. or you maintain the role/position/user/whatever.as the possible agents. still you dont get the result, debugging the default rule in the task ->default rule -> agent.
hope this helps.
with regards,
Sudhahar R

Not coming to change mode

hi all,
in that IDOC extension program(customer) user exit for extension it is not coming to change mode in my IDES version.It shows the warning message 'This include program is for user_exit only'.
Rgs,
Venkat.

Once after you get the warning message then click on ENTER key and proceed to create that include and write your logic.
It will accept.
Thanks,
Srinivas

SAP Idocs Not Received

Guys,
I have setup up configured SAP Adapter to recieve Idocs from MySap System. The connections looks good. But when the idocs are send out. Sap Adapter doesn't pick them up and give errors like:
Wed, 20 May 2009 16:44:53.0444 IST - Thread[JCO.ServerThread-16,6,main] [info ] Check: 253D160B643C4A1425690079
Wed, 20 May 2009 16:44:53.0448 IST - Thread[JCO.ServerThread-16,6,main] [error] No subscribers for this channel. Event thrown away.
Anybody encountered such problems?
Thanks,
KS

Hi All,
Hiearchy of Installation:
Oracle Weblogic server 10.3.1
OSB 10.3.1
i have configured OSB SAP JCA adapter in adapter explorer, but after making a successfull connection to SAP application it's unable to fetch idocs. Under idoc icon created there is no idocs present. If we search particular idoc, its says not found. Even business objects repository and remote funtion modules are not coming correctly.
Has anyone faced this kind of any problem. Please let me know the solution.
Thanks

(Request for reporting available) is not coming in Cube

Hi All,
I have Cube & DSO.
I added fields in DSO & Cube.
Cube1 has Aggregrates built on it.i added 5 infoobjects on it, Now when i load data from DSO to Cube(Request for reporting available) is not coming up. i cant do reporting on it. can anyone help.
thanks in advance,
Kiran.

Hi ....
Have you done the Roll up ?
Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
Regards,
Debjani....

Data from one cube is not coming in the multiprovider

Hi,
I have two cubes with a common characterstic.
I created multiprovider above these two cubes. But data is not coming from the cube 2. The values from cube 2 are showing as 0.
Can anyone help me out in this?

Hi ,
Check the following:-
1 Check whether you have made the joins properly.
2 Check data at multiprovider level .
3 is data available for reporting in both the cubes
Regards
Rahul

IDOC not there in WE02

Hi Gurus,
I am doing a FILE TO IDOC scenario for taking Material Master data from the MDM system and posting the IDOC into the R/3 system..
The entry is there in MONI with the chequred flag but there is no IDOC in we02 of the R/3 system.
Also , i pasted the payload from teh MONI and checked in the mapping and the test was shown to be successful.
Can Anyone please tell me what can be the cause and its probable solution?
Thanks in advance,
Shweta.

(1) Error Category - CO_TXT_OUTBINDING_NOT_FOUND
The problem is in Technical routing.
Check whether the receiver determination and interface determination objects are active in change lists tab. If they are not active, activate the objects.
Also check the if the receiver determination and interface determination objects are referenced to the same namespace or not. Sender and receiver interface objects should always refer to the same Namespace.
(2) Error Scenario - ATTRIBUTE_IDOC_METADATA
Check the receiver communication channel (Created using IDOC adapter). In this communication channel check if the two mandatory parameters are passed correctly.
Following is further info on those two mandatory parameters.
(i)Check if the RFC destination which is created in XI to connect the target SAP R/3 system is working fine.
(ii)Check if the port that has been created in XI is in the form SAP<SID of R/3 system>. If not, create in the form of SAP<SID of R/3 system>. To this port, specify the above RFC Destination.
(3) Error Scenario - IDOC not yet created in target SAP R/3 system.
Go to R/3 system and check at Tcode WE05 if the IDOC has been created successfully. If error is u2018"Partner profile not configured" check point 9.
Suppose IDOC did not get created at R/3 end and all the pipeline steps were successful in SXMB_MONI, then go to Tcode : IDX5 in XI and click on Transaction ID field and check the status description which explains the problem.
(4) Error Scenario - Partner profile not configured.
Go to Tcode WE20 in R/3 system and check if the partner profile has been configured correctly and is filled with the inbound parameters.
regards
chandra

IDOC not displayed in WE05

Hi Experts,
I have successfully run my scenario CSV-pi-Idoc yesterday. IN MOni XML file is Ok. In R/3side (WE05) Idoc generated successfully. But Yesterday night Basis people change R/3 password. Now my problem is in R/3 IDOC not displayed in WE02.
Iam also change password in SM59. But no result. Where can I do changes. can any one help me.
Thanks
Hari

Hi Hari,
Make sure in SXMB_MONI in your PI system the message is showing successful flag in outbound side (ie.. drag the scroll bar to ur right had side and see if you can see checkered flag). If you see any error then go to tcode sm58 (trfc queue) and filter based on dates and u will find error logs in detail and take appropriate action.
Mostly it might be authetication problem so better to check in ur R/3 destination in Sm59 in PI system if your rfc test and authentication test is successfully showing green or not.
Thanks,
Prasanthi.

Idocs not coming to XI

Similar Messages

Maybe you are looking for