IDOCs not generating with classic scenario

Hi,
We are with SRM 7 with Classic Scenario.
Issue : SRM Org. structure is replicated from ECC system through IDOCS. But, suddently, no IDOCs are getting generated in SRM after we run PFAL in ECC.
IDOC is getting created in ECC after we run PFAL but not creating in SRM.
Your inputs are appreciated.
Thanks
Nag

Hi,
We have faced same issue.
You first check with tcode WE05 in both SRM & ECC. You will get to know which idocs present (transferred).
You can process unexecuted idocs using tcode BD87.
After processing idocs you must run distribution model.
This way we resolved our issue.
Regards,

Similar Messages

Please help me , how idoc is generated with the transaction pu12?

Hi
please help me on pu12, how the idoc is generated.

Please be aware that you are not communicating with Apple when you post in these forums. The only people who will reply to your posts are your fellow users.
You will have to work with the authorized service centers in India. Why did the service center you contacted say that they could not help you?
Regards.

Inspection Lot not generated, with MIGO 561

Hello All,
Please help me with this issue.
WHen i do MIGO with 561, inspection lot is not generated.
So there is a setting in spro, if we check that, inspection lot wont be generated.
So now in my IDES, i tried to uncheck that box.
When i save this setting, I get the following error.
"Fill table key for table T156Q only up to position 010".
Please help with this issue.
Regards,
Piyush

To load initial inventory in Quality stock and release it using Inspection lot UD, use movement type 563 instead of 561.
With 561 movement stock is directly posted to un-restricted status. So there is nothing to be released from Quality stock.

F110-idoc-not-generated-rffoedi1

hi expert,
I am running a payment program F110 and the IDOC is not getting genrated for
the payment program. In the payment log i see the infomation
IDOcs were generated for the following entries.... but when i chekc the idoc by we05 i can't find any idoc,
please advice on it.
thansk

Hi,
Idoc's are generated based on the payment method and any how in the payment method we will give the required curriencies which are applicable for that payment method.
And u had mentioned as WE05 for IDOC list, but actually the T.Code for IDOC list is WE02.
Check the settings, it has to come. Reply back for more clarifications.
regards
srikanth.

Purchase order in not created in classic scenario

hi everybody,
we are using classic scenario.System is unable to create a PO direcetly in the backend .it created a pr when the shopping cart is created in R3.i have done complete settings like define backend objects ,and in shopping cart i have entered price as well as vendor.kindly let me know the solution.
thanks
chakradhar

Hi. Muthu is probably right, are you entering a fixed vendor from a contract or are you keying in a desired vendor?
If you key the vendor in you will get a req, as it is not a fixed source of supply.
To make it fixed you have to use the BBP_DOC_CHANGE_BADI to change the partner type from preffered to fixed.
Regards,
Dave.

PDP with classic scenario

Hello,
I am working with SRM 7.0 and ECC 6.0.
1) I would like to know how do you transfer PR to SRM in classic scenario? Is it the same as for extended classic scenario (using program BBP_EXTREQ_TRANSFER)?
2) How do you create PO in backend for direct procurement in classic scenario ? I was reading different threads and I found that I need to apply a BADI to clear the account information. Is this correct?
Thanks in advance!
Martí

Hi Martin,
As mentioned by SAM, you can transfer the requirements from ECC system to SRM system using newly introduced BAdi 'ME_REQ_Sourcing_cust'. BBP_EXTREQ_TRANSFER' is no longer used. However, your backend ECC system has to be on ECC 6.0 enhancement pack 4. otherwise, you still need to use the prog you have mentioned.
Yes, you can still use classic scenario for direct procurement by claring the accounting info in SRM. there are already number of threads for the custom solution.
Regards,
Ranjan

Material Master Change Pointer IDOCs not generated for Moving Avg Price GR

No IDOC is created or distributed when the moving average price
changes. Each time a Goods Receipt is performed, the material master
moving average price (MBEW-VERPR) changes but the change is not
distributed. No change pointer is created in the tables. Why?
We need to send the moving average price each time it changes. In our
case, each time a Inbound Delivery has been Post Goods Receipt this
value changes for that material + plant combination and the value
should be sent.
The field MBEW-VERPR is included in BD52 as a field relevant for change
pointers for the message type.
Please advise.

Hello,
SAP will not generate change pointers (and no IDOCs) for Moving Average Price (MAP) changes. This is because MAP updates are not really Master Data changes and they are driven by transactions such as Goods Receipts, Revaluations etc. For these transactions, SAP will generate respective accouting documents for traceability.
Thanks,
Venu

PO creation problem with classic scenario

Hi All,
We are in SRM 7.0 nad have mapped extended classic scenario. Now we want to map the Classic scenario only for a specific company code. So, my question is can we map the classic scenario on company code specific.
I tried maintianing the document type & number ranges in R/3. Maintained the number ranges & transaction type in SRM.
Also implemented BADI BBP_EXTLOCALPO_BADI.
But after creating the SC the status is "Approved" but no PO getting created in ECC. On observing RZ20 there is an system error for the number ranges.
Please let me know if I am missing some steps.
Thanks in advance.
Regards,
Abey.

HI,
Make sure the PO number range in ERP is same in SRM. Also have the external checkbox checked for PO number range in ERP.
Also have the same transaction type in SRM and ERP. Where the ERP transaction type should have external number range as the above mentioned profile.
Regards
Sam

NVision Report not generated with email option in the Run Report page

Hi ,
I want to send the nvision reports through email to the users, I tried it by setting the email option in the drop down of the "Type" after giving "Run Report" and then specifying the email ids. The issue is i am getting emails , but the report is not generated which otherwise generates, and hence no attachement is seen on the email .
Anybody faced this issue ?? Please help
Regards,
Kanchana

Hi again!
You are absolutely right! I will mark as solved in 5 mins (can't do it now, thread to fresh it seems).
thanks
Manfred

Idoc not generating in F110

Hi,
I have a requirement to generate Idoc in F110.
For this i created one payment method with incoming payments and payment method classification and assigned program RFFOEDI1
I run F110 successfully but IDOC is not getting generated.
previously we created the same payment method for country spain and now i am creating this for Italy with same program and other details. Still IDOC is not getting generated.
Am i miss anything else FBZP configuratoin? Please let me know
Regards,
Sankar

Hi,
I clicked on create payment medium but still error is not resolved.
Hi sunil,
Thanks for your valuable inputs.
As i told earlier i have house bank Bank of America(BOA) available for spain earlier with EDI partner number as 121.
For house bank Bank of America (BOA) for italy i added the new payment method R in EDI compatiable payment methods. System automatically generated House bank BOA as a EDI partner number.
Before payment method "R" added in EDI compatiable payment methods (in FI12 for italy house bank)for partner number 121 i have outbound parameters message type as DIRDEB and PAYEXT after i add payment method "R" for partner profile 121 outbound parameter message showing as PAYEXT and newly added inbound parameter EURTXT. For the EDI partner number BOA outbound parameters message type addes as DIRDEB and PAYEXT.
I am in a confusion that by adding payment method "R" in FI12 EDI compatible payment method system is going to create new EDI partner number BOA but due to that the earlier partner number 121 is getting effected. Due to this reason i am not able to go ahead further.
Regards,
Sankar

IDOC not generated in R/3

Hi,
we30- i have created the custom idoc
WE81 : for message type creation
we82- assigned it to custom message type
SE37: created a BAPI function module - no coding in the source i would like to just generate idoc in R/3.
WE57 : to assign a BAPI function module to IDOC
BD51 : and define characteristics for the above created FM.
WE42: for process code creation(give ur FM in Identifictaion field)
WE20 : Partner Profiles and give corersponding details along with the Process code.
from XI message sent successfully.
but in R/3 no idoc received or generated ... what might be the reason?
even if i use
call function 'INBOUND_IDOC_PROCESS'
tables
idoc_control = idoc_contrl
idoc_data = idoc_data
in created BAPI function module , no idoc generated.
pls share your experience in resolving the same...
tnx in advance..
balu

Hello,
Maintain distribution model using transaction BD64.
Create amodel and maintain sender , Receiver and message type in the model.
Then distribute it to receiver.
Regards
Arindam

Message processed successfully in PI but IDOC not generated.

Hi,
Currenlty for some messages, Idocs are not getting genrated and
outbound queue in moni for this messages shows as IENGINE instead of
IDOC. Also the outbound flag doesn't have any status and there is no error information.
We are using message packaging but Before upgrading support pack from SP15 to SP21
we didn't face any issue regarding packaging.
Please suggest resolution for this if anyone have faced this kind of issue.
Thanks,
VK

Hi,
Please check what Markus said.
Also look for these settings in your scenario:
Check trace message in the SXMB_MONI ,
Check all queues are registered ? go to SXMB_ADM and check out this
Check about Receiver determination and Receiver Business Service is pointing to correct R/3 system. For this look into Adapter Specific Message Identifiers for the Reciever Business Service
If you are using BPM here ? If so check the BPM status
Let us know if this helps!
Divyesh Vasani

IDoc to Mail (with attachment) scenario

Hello,
I have a simple IDoc to Mail scenario. The payload is send as mail attachment.
The IDoc is mapped to a structure representing the attachment-file format.
The mail adapter is set up as follows:
Transport-Protocol: SMPT
Message-Protocol: XIALL
Use Adapter-Specific Message Attributes and Variable Transport Binding are checked.
I also use Modul StrictXml2PlainBean to convert the Payload into FlatFile-Format.
And I use the Modul MessageTransformBean to set up the Payload as attachment and to set up the name of the attachment. I use these parameters:
Transform.ContentDisposition = attachment;filename=test.txt
Transform.ContentType = text/plain
The result is an Email with two files as attachment.
The first file contains the payload in FlatFile-Format as expected, but there is also a second file (XML-Format) with information about the message.
Now:
1. How can I get rid of the XML-File? I dont need it and it doesn't help the receiver of the Email, its just confusing.
2. How can I set up a dynamic name for the attachment from the paylaod ?
Thanks for your help.
Elko

HI,
I think your problem is solved.
Refer the weblog which does the same thing.
/people/michal.krawczyk2/blog/2006/02/23/xi-dynamic-name-in-the-mail-attachment--pseudo-variable-substitution
I hope this is what you want.
Thnx
Chirag Gohil

Ehlpdhtm.js not generated with rhcl.exe, only RoboHTML.exe

During the efforts to solve a problem documented here:
http://forums.adobe.com/thread/603888?tstart=0
I removed ehlpdhtl.js as a baggage file from our projects. I had added it (years ago) to make sure it was included in the final output. We build our Help nightly with a script that makes use of the rhcl.exe command line feature. I've already filed an enhancement request that the rhcl.exe create ehlpdhmt.js if it doesn't exist. In the meantime, I'll have to have some code added to our build script to make sure it is copied into the projects.
.MW

William and Marcus,
I think I can help here, because I just had the same issue Marcus proposed, and I did some testing. Robohelp 9 results:
If ehlpdhtm.js file is NOT present in the root project directory, it will only drop in there WHEN you open the project, NOT when a build is initiated.
Both the IDE compiler and RHCL.exe command line tool, when initiated, will indeed generate this file in the output location, ONLY IF it exists in the project directory to start. This is why the IDE compiler almost always includes the file in the output, because you have to open the project to kick off the IDE compiler. I tested this by opening IDE then deleting the file and hit compile and it did NOT include it. I also ran the RHCL.exe with the file present in the project directory and it DID include it in the output.
This all being said, I have to agree with Marcus and that this is a bug for the RHCL.exe compiler. It should auto generate that file at the start of a new build in the project directory and then the output location when it completes.
Why is it a bug? Impact: All DHTML controls that this file operates will not work in a compiled help file.
Another suggestion, but off topic, please add an integer exit code for RHCL.exe that can be interpreted by scripts and other applications. Thank you!

Report not generating with blob

SO I was trying to create a report to insert an image. I saw and followed the following resource: http://blogs.oracle.com/xmlpublisher/2006/05/inserting_blobs_into_your_repo.html
In the template builder for MSWord, where I grab the XML data containing the Base64 code for the image, the output is all there. - so yes the actual query grabs the base 64 version of the image, as per http://sergekoganovitsch.wordpress.com/2009/05/02/blob-base64-encoding/
Now the situation is there is a temporary table that stores all the fields, and the image, along with the apex session_id. So the report query looks like this:
SELECT
p.full_name
, blob_to_clob_base64(p_photo => p.photo) photo
FROM profiles_tmp p
WHERE p.session_id = :APP_SESSIONSo.. first to make sure it was all working properly, I created another report query specifying a specific session id in the where clause that I know contains a photo - all works fine. However, when I apply the layout to the query above, and test it - it comes out containing no pages. Even if I test it when going through the application where there would be a valid session id, still no pages.
I have tried changing :APP_SESSION to v('APP_SESSION') and to_number(:APP_SESSION) to no avail.
If i remove the image bit, and just have the field as <?PHOTO?> , it outputs the base64 contents fine - but obviously, I want the actual image in the report, not the base64 code.
IF i open the pdf file in a text editor, I get the following:
%PDF-1.4
1 0 obj
<<
/Type /Catalog
/Pages 3 0 R
>>
endobj
2 0 obj
<<
/Type /Info
/Producer (Oracle BI Publisher 10.1.3.4.1)
>>
endobj
3 0 obj
<<
/Type /Pages
/Kids [
/Count 0
>>
endobj
4 0 obj
<<
/ProcSet [ /PDF /Text ]
>>
endobj
xref
0 5
0000000000 65535 f
0000000010 00000 n
0000000065 00000 n
0000000147 00000 n
0000000208 00000 n
trailer
<<
/Size 5
/Root 1 0 R
/Info 2 0 R
/ID [<e45d94e9f08bf009170c54aabd4c051c><e45d94e9f08bf009170c54aabd4c051c>]
>>
startxref
258
%%EOF
<PRE>Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.</PRE></BODY></HTML>The DBA enabled trace and I have that log file.. but don't really know what I am looking for :-/
It doesnt really make much sense to me, since when running it in the application there is a valid session id and it doesnt work. but if i explicitly specify the session id in the report query it does work.
Has anyone experienced said problem or can provide any useful guidance?
Thanks,
Trent

Found out this was a limitation to do with apex <= 3.x .. see http://marcsewtz.blogspot.com/2008/06/one-question-about-pdf-printing-feature.html

IDOCs not generating with classic scenario

Similar Messages

Maybe you are looking for