IdocType, Message Type & Process code for Payroll Posting
Hi Gurus,
In My Project, the SAP HCM is Maintained as a separate instance and rest such as FI/CO resides in ECC ERP. Now We need to Interface the HCM Instance with ECC ERP, where FI/CO resides to post Payroll Results. Hence I am writing a Technical Specs for ALE interface between SAP HCM and ECC ERP. I came to know that a standard ALE is existing for this purpose and I hereby need its Idoc type, Message Type and Process code for the same.
Thanks in advance.
Regards
Vinoth Kumar.R
Guys
I could not use above message type/idoc type as they are not released in SAP.
So i am again back to where i have come from. I am trying to use DESADV01 and Mess Type DESADV.
Regards
Srikanth M
Similar Messages
-
Inbound Idoc Type / Message Type / Process Code for Delivery via Tcode VL0N
Guys,
I need to to Idoc Type and Message type for to create Delivery ( Tcode VL01N ) for a sales order.
I tried Idoc Type DELVRY03 and Message Type DESADV, but this is for Purchase Order ( VL31N ).
Kindly help me.
Regards
Srikanth MGuys
I could not use above message type/idoc type as they are not released in SAP.
So i am again back to where i have come from. I am trying to use DESADV01 and Mess Type DESADV.
Regards
Srikanth M -
Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 ,214
Hi friends,
Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 (Response to a Load Tender)., 214 (Shipment Status )
For shipement status i got trxstc01 for idoc type .. but its only before 4.6 version ..for 4.7 its not there .. please give the alternate for that ...
Thanks in Advance ....
If any one is provide exact answer i will give Max marks ..
Edited by: ajay KOLLA on Aug 6, 2009 8:04 AMHi,
Have you resolved this issue. If yes, can you please let me know. Im actually looking for same for EDI 867 (guess it is for summary report and need to know message type, Idoc type associated with this).
Rgds
Sudhanshu -
Message type ,IDOC TYPE , PROCESS CODE for Edi 990
Hi ,
Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 (Response to a Load Tender).
Thanks in Advance.
Ajay KollaHi
Pls check the below links
1. http://www.erpgenie.com/sap/sapedi/ansi.htm
2. http://www.erpgenie.com/sap-technical/ale-edi-b2b/master-data-message-types-idoc-types
Hope this may helps you.
Regards
Sirigiri -
What IDOC message type to use for AP posting
Hi,
My User wanted to use the invoice information created for comany A to be input to company B as AP entries. A and B are inter-company,
Whar IDOC message should I used for AP posting?
What BAPI function can I used for AP Posting?Hi,
Lets try the below things for AP posting.
Idoc type : invoic02
Message type : invoic
Process code : INVF
BAPI for posting : BAPI_ACC_GL_POSTING_POST{ Try to explore some more if possble, for AP posting in my case we are separtaing the data based on posting key ex: 31 }
BR,
Rajani -
LSMW- LOIPRO Message type process code
Hi Can any body tell me what process code to use production order create (Message type LOIPRO, Basic type LOIPRO01)? We are trying to use "BAPI". But we are getting errors.
Thanks
RobHi Soumyadip,
Thank you for you reply. We cann't use this function as it does not have required interface (CLOI_MASTERIDOC_CREATE_LOIPRO) for process code (from Tcode BD67). That to this function is outbound to generate IDOCs, not to read one and create Production Order.
Can you please let me know if have any idea about other functions? I checked KK5_GET_DATA_FROM_IDOC, which is not valid for this application.
Thank you very much,
Rob -
Message type and Process Code for 940 IDoc
Hi,
what Message type and Process Code can be used for 940 IDoc when a SHPMNT05 IDoc is being used. We are using SHPADV message, SHPM process code for ASN. Can I use the SHPMNT message type for 940?
thanks,
Kumar.should SD11 be the only process code to be used or can we use SHPM. I guess we can use both for shpmnt05. But how do I know which process code is more suitable for my purpose. is there any place where i can check that info?
Can we link SHPORD message type to a SHPMNT05 IDoc? i think this message type is more suitable.
thanks,
Kumar. -
Process code for 869(EDI ) Order Status Inquiry Message type.
Hi Gurus,
Please can any one help in providing Process Code for 869 Order Status Inquiry Message type.
Thanks,
SudhakarHi Everybody.
There's no standard process code for LOIPRO Outbound Idocs.
This Idocs are threated as master data info, and could only be automatically generated by Data Distribution Model.
BD64.
Anyway, you can define your own Outbound Process Code in WE41 using CLOI_MASTERIDOC_CREATE_LOIPRO FM.
You can choose.
Regards.
Albert. -
Process Code for Message Type LOIPRO(in ALE/IDOCS)
Hi all,
I have to implement Production order Interface(create Production order,change Production order etc).The requirement is for eg:,I created one production order and posted it;it should get reflected in the recieving system.Does anyone know the process code for LOIPRO.I checked it in we42,WE64 and even the tables TEDE1 and TEDE2.But its not available.Process code and function module is necessary to continue with WE20.
Thanking you in advance,
anjalyHi
it may sound like not good news, but I think the answer is described in OSS Note 198252 - Special features of POI message category LOI*.
There all LOI* idocs are mentioned and then they say:
The message categories named are part of the POI (Production Optimization interface) interface.This interface and the message categories contained in it were developed for the transfer to non-R/3 systems.Therefore, an inbound processing in the R/3 system is not planned.The message categories are transferred via separate transactions / reports of the POI interface (Transactions POIM, POIT).Functions which exceed these transactions are not supported.For this reason, the above-mentioned ALE functions cannot be used for the message categories described.
So, in short, there is no inbound process code for LOIPRO.
Inbound processing then should be done through self-developed programs / idocs, calling BAPI-s (for example).
Regards,
Joe
Edited by: Joseph Yasman on Jun 30, 2009 1:46 PM -
What is the process code for Message type FUNDMA
Hi,
I am sending CO elements to the distributed server using ALE. Can somebody tell me what is the process code for the message type FUNDMA?
Thanks
WilliamCheck entries of table VEDI_TMSG1. This contains Message types and associated Process codes.
Hope this helps.
ashish -
Specific process code for Production order message type LOIPRO
Hello,
Is there any specific process code for Production order message type LOIPRO.
Request you to reply.
Thanks
PrashanthHi Prashanth,
sorry for last thread ... that not contain full information ...
For message type LOIPRO you can use process code APLI.
In IDOC PARTNER definition, the partner is linked with an IDOC TYPE and PROCESS CODE for inbound processing. This process code is in turn linked with a FUNCTION MODULE to process the IDoc such as IDOC_INPUT_INVOIC_MRM (Reff.. http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_cid519558,00.html)
Regards,
Amit -
Process codes for message types IORDER and INOTIF
Hi All,
I need to know the process code for above message types.
I could not get specific process code in WE64.
Regards,
ShahuHi,
Try searching in WE42.
This is what i found we64 (same for both message types):
ABI_AIDN_IN
ED00
ED00_XML
ED08
Good luck! Reward if helpful.
Message was edited by:
John Damion -
Finding Process Code for a message Type
Hi,
Is there any way to find process code for a specific message type.
Message Type WFRESOURCE_CHANGEAVAILABILITYHi Swathi,
I have already mention the process codes that can be used for this message type. For your convenience i am also attaching th description ,which process code can be used when.
ABI_AIDN_IN Auto- ID Idoc process
ED00 Display Idoc using work item
ED00_XML Display idoc using work item (xml)
ED08 Forward idoc
ZABI_DLV_IN Delivery advice ( AIDDESADV with DELVRY04)
Regards
Vinod -
What is the process code for message type FIXEDASSET_CREATE?
Hi all
please tell me that what is the process code for
MESSGAE TYPE = FIXEDASSEt_CREATE,
FUNCTION MODULE = IDOC_INPUT_FIXEDASSET_CREATE,
BASIC TYPE = FIXEDASSET_CREATE01 ?
thanx in advance.......
Edited by: Prachi Sharma on Jan 11, 2008 7:45 AM
Edited by: Prachi Sharma on Jan 11, 2008 8:03 AMHi,
Check the Tcodes WE41 and WE42 for Outbound and Inbound process codes
Check below Tables as well
EDE1T
EDE2T
EDE5T
EDE6T
TEDE5
TEDE6
Regards,
Satish -
Required Outbound Process Code for MessageType LOIPRO (Basic type-LOIPRO01)
Hi EDI Gurus,
I need to know the outbound Process Code for MessageType LOIPRO (Basic type-LOIPRO01).Hi,
there is no process code for MessageType LOIPRO .
check the below link u will get the clear idea.
Re: Process Code for Outbound Production Order??
Reward if helpful.
Regards,
Nagaraj
Maybe you are looking for
-
Airplay with Sony RDp-AX900 no longer working
Running off a Standard MAc 21".. 2011 model ... just upgraded the box to Mavericks Trying to use spotify or Itunes and just want output to go the the external Sony airplay speaker.. Works fine to Apple TV sitting next to it - it sees the Sony but w
-
Mutlivalue error in break footer
Hi All, I am getting Multivalue error for default aggregated measure in table break footer. example: i apply break A (dimension) , i have measure ( default aggregation), when i apply break on table for that measure at foooter i am getting multivalue
-
Hi All, I have to change the tax jurisdiction code of ship to party to Tax Jusrisdiction code of Ship from Party (Delivering Plant). How can I achieve this using BAPI_SALESORDER_CHANGE. Please give some inputs. Regards, Shankar
-
After upgrading my Macbook Air to OS Yosemite it doesn't recognise the 3G USB modem which was working previously. Any ideas?
-
Mixed Measurements in Document Setup box
This is from an old pagemaker file opened in CS5. At first it amused me, then when an export to idml didn't fix it it started to annoy me: When we try to type in 297mm in the height box it changes the value right back to inches. I've even tried del