IDRAC 6 Express - Update Firmware Question

Hello,
does anyone know if updating the iDRAC 6 Express firmware via the web gui causes any issues? I know it needs to reset itself. But I am wondering if it requires a full reboot or does the NIC reboot? Thanks.

I posted a more general question about this is this post (http://community.spiceworks.com/topic/1087984-do-i-really-need-workgroup-agent-license-for-shoretel?.... ) , but unfortunately, it kind of went cold. So, I am reposting with a more condensed question. We have a group of employees that will be hot desking on their phones and will also be using Communicator. I want them to always be logged into a workgroup which I understand canbe done fromDirector. My question is,do the users that are logged in via Director stay logged in when they hot desk from phone to phone? Assuming that is the case, do I need workgroup access licenses if they are never going to be logged out of the workgroup?

Similar Messages

Updating firmware in Airport Express disables connection to Internet

After updating my Airport Express to firmware 7.6.1 it will no longer connect to the internet via a 4-port router that is connected to a DSL modem. This arrangement was working immediately prior to the firmware upgrade. I have unplugged/plugged in the AE, turned off then on the modem/router/AE combo all to no avail.
The AE establishes a LAN, but Airport Utility indicates that the AE beleives that the Internet is disconnected, when in fact all the other devices attached to the router via ethernet cableing works as expected.
Any suggestions for reestablishing a working internet connection via the AE would be appreciated. Thanks.

I was able to fix the issue by directly connecting my AE to my MBP with an ethernet cable and using Airport Utiliites to reset the AE to factory conditions. I then had to reenter the various usernames & passwords on each of my connected devices, a pain but at least the AE now works well.

Having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.

having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.

AirPort Utility in Mountain Lion will not support the older versions of the AirPort Express.....model numbers A1084 and A1088. Check on the side of the Express for the model number.
In addition, AirPort Utility in Mountain Lion will not support the older "round" or "dome" shaped versions of the AirPort Extreme.
Can you check to see how your devices might be affected?

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware on Extreme as well as both of my Airport Expresses. Hard drive is USB connected to Extreme.

Reboot the USB drive.. assuming it is powered.. or unplug and replug a self-powered drive.. (you should not use self-powered drives on AE before the latest model.. always use a powered hub).
Does the drive now appear in finder..
If not reboot both drive and the AE.. it should now appear.
If it doesn't work with direct connection try a powered hub.. that can help.

Updated firmware of Creative Zen Nano P

Questions?. Why do i need to download new updated firmware every now and then?2. WHat is the disadvantages if i don't download new updated firmware every now and then?3. What is the difference of the updated firmwares found in creative download section and the DAPJukebox website?4. Which is has the best quality firmwares, the creative download section or the DAPJukebox website?thanks?

All software regardless how good the quality control will have bugs.
Firmware is just software that is stored in the hardware on your device. New firmware is often released by a company to fix bugs or possibly add functionality that could enhance the use of a device.
But it is also possible that a new firmware update might add a new bug or two. (a rare occurance)?Sometimes (unfortunatly) new firmware upgrades can end up removing a feature.
For example it appears creative was under some legal pressure to remove the radio recording feature from there devices. On the ZVM, it was removed in one firmware upgrade, then in a later one it was replaced. On the Zen Nano Plus it was removed in the latest firmware upgrade (which is actually a bit old in calendar terms right now), but they have not released a later version that adds the recording back in. So in the case o fthe Zen Nano Plus, an firmware upgrade could be considered a bad thing.
If you require and use the radio recording functionality, then upgrading to the latest version (to fix some minor bugs) could end up crippling some of the functionality of the device. Normally when new firmware is released, there are notes detailing changes in functionality, bugs fixed, and even bugs that still exist. By looking at the information you can determine if you want/need to upgrade to the latest firmware.
Since there is some inherent risk in upgrading a firmware, most people don't upgrade firmware unless they need the new functionality or are experiencing a bug of some kind on the device that the new firmware might possibly remedy.

Can't configure Airport Express after firmware upgrade 6.2.

I have an Airport Extreme (V5.6) and I recently upgraded my Aiport Express to firmware 6.2. I was using the Express to extend my range and attach to my stereo for iTunes. I went out of town and took the Airport Express with me to use in my hotel rooms. Everything was fine. When I returned and I re-attached the Airport Express to the system at home, it said there was a firmware upgrade, so I went ahead and did the upgrade. Since that time, iTunes has not been able to recognize the Express. It tries, but cannot find it. I then tried to reconfigure the Aiport Express but i get an error message "An error occurred while attempting to communicate with the AirPort Express. (-8)". Does anybody have a solution. I'm afraid to update the Base Station firmware for fear that I might run into the same problem. I'm running an aluminum Powerbook G4(1.25 ghz).

Hi,
I don't really know the solution, but the Airport Express firmware is now at 6.3. Maybe you should use this latest one to see what's happen...

Help! Accidently updated firmware of Laserjet pro 400 with Laserjet CP4525 firmware

Help! Accidently updated firmware of Laserjet pro 400 with Laserjet CP4525 firmware. The printer is now just spewing out pages and never reaches a ready state to put the correct firmware on. I really hope I haven't bricked it just by a silly click.
Can anyone help or suggest a way to put the correct firmware on?
Cheers
Glyn
This question was solved.
View Solution.

The product might be receiving the earlier sent firmware update as a job in the print que. Delete pending jobs from print queue & connect network cable to printer. The device should perform normal boot till READY state.
Download and use easy firmware upgrade utility using following HP web link to upgrade priner firmware:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
Please mark the post that solves your problem as Accepted Solution
Click the 'Kudos Thumbs Up' if this was helpful. Thank You!
(Although I am an HP employee, I am speaking for myself and not for HP)

Can't update firmware for Ipod Touch on my PC

I have a 1st gen Ipod touch & windows xp. I have the latest itunes.
It will not let me update the firmare, but I can sync fine.
To update the firmware, I give it to my husband and he can do it from his computer. Then I can sync with no problems. It's just the updating firmware that causes the ipod to crash (1602 error, but occassionally other numbers).
We thought it might have been that I didn't have USB 2 ports, so I bought a USB 2, 4 port card, and my husband helped me install it. Unfortunately this did not solve the problem and it still wont let me update. I thought perhaps because the usb 2 card came with driver disks, it might need a driver. But I checked the driver disk and it contained drivers for strange things I didn't have. Then I checked the internet and it said that with xp the drivers should be automatic with windows update, and mine is all updated, I checked.
I've checked my devices manager list, and the list only contains one "enhanced" usb port, even though the card I have has 4 ports, but maybe I am not understanding how the devices list works.
Just to clarify, have had the same problem with 2 ipod touches. My orignal one got a cracked screen (one crack so covered by warranty) and I received the replacement ipod touch yesterday, and I still could not update the firmware on my PC. My husband had to do it on his PC (vista).
Thanks in advance for any suggestions. I really would like to be able to update the firmware on my own PC, it's geting extremely annoying.

Because I cannot sync my music to my iPhone without updating on my PC which has all my iTunes. Where should I have posted my question to get the help I need?

SSD's which are OK for updating firmware on a Mac?

I'm looking at a couple SSD's for a MacPro, any thoughts on which are OK with updating firmware on a Mac? Probably better to ask now before I need to..
Crucial M500 or Samsung 840 Pro? I'm assuming that OWC's offerings are probably the best for Mac compatiblity, any others?
thanks in advance.

Firstly there is a near identical question about setup of just days ago that hopefully you found and looked at in your research.
System on SSD / scratch for CS6 / projects
Lloyd's blog is full of tips: http://www.macperformanceguide.com
Start with what SSD (single) then get into multiple and setup and apps and how they are used, which really might be first thing to ask?
The Pro uses highest quality but both have much of the same controller and firmware - and it was just reviewed as to what the diference is. Find and read that.
Rick over on MacGurus setup an old working model for PS: a scratch disk + working project files is the fastest - was done with SCSI and then the first 10K SATA Raptor. Probably still holds true.
No you are not limited - I strongly suggest you set it up on Sonnet Tempo Pro RAID card and then use one 250GB 840 to start with, then add 2nd. Use one of the PCIe slots for your SSD(s). Maybe start with a 500GB.
Maybe use JBOD to combine two but not in RAID0.
The system can go on SATA II drive bay or optical bay.
Is there a one size fits all or to say this is the only way? of course not, you can though test and try and work with your budget, your Mac and move SSD to where it does the most good.
Samsung starts mass producing PCIe SSDs with 1400MB/s read speeds
When the new MacBook Air got the teardown treatment... a new SSD.
The new drive is known as the XP941 and Samsung will offer it in 128GB, 256GB, and 512GB configurations. It achieves read speeds of 1,400MB/s, which clocks it at 2.5x faster than a SATA SSD. It also only weighs 6 grams and measures 80 x 22mm. Samsung claims it only takes up a 7th of the space occupied by a typical 2.5-inch SSD.
SSD Maintenance
https://discussions.apple.com/thread/5012276
Samsung 840 Pro and Samsung 840 Solid State Drives Reviewhttp://www.xbitlabs.com/articles/storage/display/samsung-840-pro.html [06/07/13 | Storage ]
Samsung currently offers very interesting solid state drives. Some boast outstanding performance, others – are built with inexpensive TLC NAND and come with a very appealing price tag. And our tests prove all of this: we are ready to discuss what we saw when we got our hands on a Samsung 840 Pro 256 GB and Samsung 840 250 GB drives.
From last September, StorageReview article 840 vs 840 Pro - they were my favorite review site for storage for years.
http://www.storagereview.com/samsung_ssd_840_pro_review
Second only to TechReport
http://techreport.com/review/23990/samsung-840-pro-series-ssd-reviewed
X-bitlabs is also one of my popular stops and they look at Sandisk
http://www.xbitlabs.com/articles/storage/display/sandisk-ultra-plus.html
I am sold on Samsung though and feel the 840 will do fine for me, but I would use $$ to get Sonnet Tempo SSD or Pro from OWC.

Can't update firmware from 7.4.1 to 7.4.2

I have an AirPort Express with 802.11n, working fine. Every once in a while, AirPort Utility pops up and tells me that it found that AirPort Express and "This AirPort Express should be updated to a newer firmware version. Current Version: 7.4.1 Available Version: 7.4.2"
So, I click on Update Firmware... and it seems to do it - meaning that it takes a few minutes, reports success, and restarts the Airport Express.
BUT - when it comes back up, it is still showing that it is running 7.4.1.
What can I do to get 7.4.2 on this AirPort Express? What's wrong?
Thanks!

I write in this thread because I think my situation is related, even if a bit different.
I had many problems with the update of my Airport Express. It started noticing I had to update the firmware to the 7.4.2 and but I've never been able doing it. As it worked fine even with the permament notification I didn't thought it was a great problem.
Then I update my OS from the 10.4.10 to the 10.6 all in one and started having more problems with my Airport Express which was constantly asking to update to the 7.4.2 but it wasn't possible in any way.
I checked this page in the Apple support
http://support.apple.com/kb/HT3486
and I updated the Utility Airport app to the 5.5.1 but it didn't help.
The worst level of problem is that I tried to link another two people (one with a mac 10.5 and one with a pc) to the wireless net and there was not access possibility.
After a reset of the airport the utility app was almost totally blocked and closed the access even from my mac notifing that my WAP password was incorrect.
At this time there are no ways to change this situation.
I'm trying to understand what's the real problem and - if someone has suggestions - how to solve it.

WAP610N updating firmware problem

Hello,
I have a problem updating firmware for an WAP610N access point.
The thing is i tryed to update from 1.0.01 to 1.0.03 and the update freezed at 49%. The next day it was restarted but of course it didn't worked again.
The question is can i reset it some how so i can retry the firmware update ?

I want to share something related to updating firmware and I cannot create a new topic so I will add it here.
Today I was reconfiguring my WAP610N, trying to get a little more out of it. I don't have any active b or g devices anymore so I set it to "n only" and walked around the house to see how my connection developed. Not bad at all, I had a fairly good connection all around the house.
Being the tinkerer that I am, never satisfied until I screwed something up, I thought it would be a good idea to look for new firmware. My current version was 1.0.01 and what do you know? There was a brand new 1.0.05 on LinkSys's website!
I installed it and... could not connect anymore. Neither with mij fully updated Samsing Galaxy Note II, nor with my brand new Samsung Galaxy Tab S. I tried everything, it didn't get better. I started looking for older firmware versions, wanting to get back where I came from. Stumbled upon FW_WAP610N_v1.0.00.832.bin and installed it. Fortunately the device didn't give me hard time telling me this was an older version or something like that, it just installed it. And I could connect again! Phew!
Then I found FW_WAP610N_v1.0.01.094.bin , tried that, same problem. Put back v1.0.00.832 again, I could connect again.
Apperently something was seriously srewed up shortly after v1.0.01.000 . My original v1.0.01 worked fine (which I lost), anything later ruined my WAP610N.
So, if you have any issues connecting, Google for FW_WAP610N_v1.0.00.832 and install it. Then resist the urge to install the latest available firmware and just enjoy your WAP610N while it works.

C7 restarting after update firmware 013.016

Yesterday I seen that new firmware is out and I start updating from my operator network,everything was OK finish update and then start the problems with my C7.My phone restarted a couple of times from yesterday,last time I was in middle of call when C7 shutdown and start again alone.what happen I suppose that new firmware is for solving bugs not to make them My phone work "OK" until I update firmware,there was some bugs with widgets but nothing serious like this.Its very unprofessional when your phone is resetting in middle of some important conversation.Any solution Nokia?Has someone else have same problem?
sorry if there are some mistakes in english its not my language but I think that you understand problem

I don't have nokia care center in my town ,I must send phone over the mail express,because of that, I first called them but only what they can told me is to send phone and they will update software.
So they think, that's the software problem,I didn't send phone yet, I wanted to try to reinstall software over PC suite, but that was problem too. PC suite doesn't recognize operators version of software.from nokia ovi suite the latest software is 012.004 ( my previous ) and don't let me to reinstall because I have newer on the phone.
"Slint" I see that you have same problem ,I noticed one more thing my battery drain to fast (much faster then with previous firmware) also after upgrading software, do you have same experience maybe?
I am working now 16 hours without restarting if you think that's the temperature problem I will warm up a little this machine now , to see what happen
I didn't expect these problems ,I am very disappointed, its big many for phone and you expect everything fine.
The phone is great I loved him but these bugs kill my love for him.
I have also N86 and he works perfectly ,I wanted a touch screen and now I have a problem.
I don't understand how can be software problem if update pass well.and if there is differences between update from operator or by PC , why nokia gave option to update by operator?
I think that the problem is stupid firmware , phone work well until the update of firmware.conlusion by me is that I hope for new firmware soon to resolve these problems.i also make complain to my operator, will see what to do next .

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

I want update firmware 2.9 but apear this message "This software is not supported on your system."

hi
I want update firmware .details my system is
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro9,2
Processor Name:          Intel Core i5
Processor Speed:          2.5 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache (per Core):          256 KB
L3 Cache:          3 MB
Memory:          4 GB
Boot ROM Version:          MBP91.00D3.B08
SMC Version (system):          2.2f38
Serial Number (system):          C1MHQC17DTY3
Hardware UUID:          EF0C6F81-20AD-50FA-9DD5-C8E084DF8E8C
Sudden Motion Sensor:
State:          Enabled
but when install the last update MacBookProEFIUpdate2.9 i got error like this
"This software is not supported on your system."
please help me thanks

OK, so the firmware is the same as mine, and yet Apple Support offered this EFI and SMC update packages, which should give a message that our computers are updated.
However, the update packages fail to run.
Did Apple neglect to give the correct update for the mid-2012 issue of MacBook Pro 13-inch? I have the i7 Intel processor, instead of the i5, and I was sold this unit as having two processors, but the System info only lists a single processor.
Is one of the problems with Intel-based MacBook Pro units that the integration wasn't without bugs that cause processor hang when running the OS Lion, even with updates to 10.7.5?
Shouldn't the EFI and SMC updaters run on these machines as stated in the Apple Support article?
What will Apple do for these customers?

I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4. Question 1: Does this model have a PCI Express slot? Question 2: Can I upgrade my USB2 port in this laptop to a USB3 port? Appreciate your help & advice..

I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4.
Question 1: Does this model have a PCI Express slot?
Question 2: Can I upgrade my USB2 port in this laptop to a USB3 port?
Appreciate your help & advice..

No & no.

IDRAC 6 Express - Update Firmware Question

Similar Messages

Maybe you are looking for