IDS and IPS Hardware Information
Hi,
Can anybody give me a detailed information in all the possible hardware that is used for IDS and IPS technologies till date.
Cisco 830, 1700, 1800, 2600, 2800, 3700, 3800, and 7200 Series Routers are supported by IPS.
Similar Messages
-
Hi
I am using before 4215 IDS in my network.
My question is what is basic difference IDS and IPS ?. why I am using IPS in place of IDS , what is the key point and benefit ?.
Thanks
biplobHi,
Here are the definitions from IPS 5.1 guide.
Understanding Promiscuous Mode (IDS)
In promiscuous mode, packets do not flow through the sensor. The sensor analyzes a copy of the monitored traffic rather than the actual forwarded packet. The advantage of operating in promiscuous mode is that the sensor does not affect the packet flow with the forwarded traffic. The disadvantage of operating in promiscuous mode, however, is the sensor cannot stop malicious traffic from reaching its intended target for certain types of attacks, such as atomic attacks (single-packet attacks). The response actions implemented by promiscuous sensor devices are post-event responses and often require assistance from other networking devices, for example, routers and firewalls, to respond to an attack. While such response actions can prevent some classes of attacks, in atomic attacks the single packet has the chance of reaching the target system before the promiscuous-based sensor can apply an ACL modification on a managed device (such as a firewall, switch, or router).
Understanding Inline Interface Mode (IPS)
Operating in inline interface mode puts the IPS directly into the traffic flow and affects packet-forwarding rates making them slower by adding latency. This allows the sensor to stop attacks by dropping malicious traffic before it reaches the intended target, thus providing a protective service. Not only is the inline device processing information on layers 3 and 4, but it is also analyzing the contents and payload of the packets for more sophisticated embedded attacks (layers 3 to 7). This deeper analysis lets the system identify and stop and/or block attacks that would normally pass through a traditional firewall device.
In inline interface mode, a packet comes in through the first interface of the pair on the sensor and out the second interface of the pair. The packet is sent to the second interface of the pair unless that packet is being denied or modified by a signature.
http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a008055df7d.html#wp1033759
Hope this helps.
Edward -
Hi,
Kindly brief about placement of NIDS in a bank network scenario and IPS placement also...You didn't get an answer because the question is too vague. I think that banks have different requirements depending on their size. As I recall, there can be different regulatory bodies involved (OTS vs OCC) based on size.
I would say at a minimum you should have IDS/IPS at all perimeter points. A bank should probably also have some sort of IDS/IPS protecting servers (Network and/or Host based).
You might take a peek here for some more high-level info:
http://www.ffiec.gov/ffiecinfobase/html_pages/it_01.html -
Hardware Information:
iMac (24-inch, Early 2008)
iMac - model: iMac8,1
1 2.8 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information:
ATI Radeon HD 2600 Pro - VRAM: 256 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 5 days 20:20:57
Disk Information:
Hitachi HDP725032GLA380 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (96.82 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple Inc. Built-in iSight
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
HP Officejet J6400 series
Nike FuelBand
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
G-TECH OEM ATA Device 00 800mbit - 800mbit max
EFI (disk1s1) <not mounted>: 209.7 MB
G-DRIVE (disk1s2) /Volumes/G-DRIVE: 499.76 GB (96.69 GB free)
Thunderbolt Information:
Startup Items:
CiscoTUN: Path: /System/Library/StartupItems/CiscoTUN
HP IO: Path: /Library/StartupItems/HP IO
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.adobe.versioncueCS4.plist 3rd-Party support link
[System] com.cisco.anyconnect.vpnagentd.plist 3rd-Party support link
[System] com.google.keystone.daemon.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
Launch Agents:
[System] com.adobe.CS4ServiceManager.plist 3rd-Party support link
[System] com.cisco.anyconnect.gui.plist 3rd-Party support link
[System] com.google.keystone.agent.plist 3rd-Party support link
[System] com.hp.help.tocgenerator.plist 3rd-Party support link
[System] com.nike.nikeplusconnect.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
User Login Items:
iTunesHelper
HP Registration Assistant
HP Scheduler
HP Product Research
HPEventHandler
Internet Plug-ins:
Flip4Mac WMV Plugin: Version: 2.2.3.7 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
iPhotoPhotocast: Version: 7.0
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 9.5.5 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Adobe Version Cue CS4 3rd-Party support link
Flash Player 3rd-Party support link
Flip4Mac WMV 3rd-Party support link
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
/Applications/Microsoft Office 2011/Office
Open XML for Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Setup Assistant: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Graph: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Language Register: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 207.12 GB
Destinations:
G-DRIVE Q [Local] (Last used)
Total size: 465.44 GB
Total number of backups: 177
Oldest backup: 2009-01-25 04:24:35 +0000
Last backup: 2014-03-17 21:35:38 +0000
Size of backup disk: Too small
Backup size 465.44 GB < (Disk used 207.12 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
9% Microsoft Word
3% Adobe Illustrator
2% Nike+ Connect
2% WindowServer
1% EtreCheck
Top Processes by Memory:
274 MB Adobe Illustrator
115 MB Mail
76 MB Google Chrome
72 MB WindowServer
45 MB com.apple.WebKit.WebContent
Virtual Memory Information:
52 MB Free RAM
666 MB Active RAM
611 MB Inactive RAM
322 MB Wired RAM
7.11 GB Page-ins
161 MB Page-outsYou are only running on 2GB of RAM. IMHO 4GB woud be the minimum to realistically run Mavericks on, although the more the better.
Pete -
Can anybody help me out if i need to know how to get the hardware informations? and also that if i need to know if there is any network card present in the system or not and if it is present then what is the MAC address of that network card? Also, if it is possible to know how many processors are present and to get the processor ids from each processor, and how much RAM is present? I would appreciate if someone can help me out in this that what API and what procedure i have to follow? and if any working example can be available it is much appreciated, thanks
This sort of question is asked. time and time again.
You can't access detailed hardware specific information, without writing native C++ code and calling it via JNI...
some things you can do, in Java are
1.call java.net.InetAddress.getLocalHost() to get the pc's IP address
2. processors... I saw some Java environment variables that might give this...
On WinNT there's an environement variable NUMBER_OF_PROCESSORS
pass this to java via
java -DprocNum=%NUMBER_OF_PROCESSORS%
then use
System procNumStr = System.getProperty ( "procNum" );
3. RAM - no, Runtime.totalMemory() only gives the maximum heap space allocated to Java.
regards,
Owen -
Problem description:
My Macbook air runs very slow since installed Yosemite a few days ago
EtreCheck version: 2.0.6 (91)
Report generated October 24, 2014 at 12:07:13 GMT+3
Hardware Information: ℹ️
MacBook Air (13-inch, Mid 2012) (Verified)
MacBook Air - model: MacBookAir5,2
1 2 GHz Intel Core i7 CPU: 2-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:15:57
Disk Information: ℹ️
APPLE SSD SM256E disk0 : (251 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 249.77 GB (28.85 GB free)
Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Access.app
[loaded] com.parallels.virtualsound (1.0.27 27 - SDK 10.6) Support
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.hypervisor (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.netbridge (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.usbconnect (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.vnic (9.0 24251.1052177) Support
/Library/Extensions
[not loaded] org.virtualbox.kext.VBoxDrv (4.2.4) Support
[not loaded] org.virtualbox.kext.VBoxNetAdp (4.2.4) Support
[not loaded] org.virtualbox.kext.VBoxNetFlt (4.2.4) Support
[not loaded] org.virtualbox.kext.VBoxUSB (4.2.4) Support
Startup Items: ℹ️
VirtualBox: Path: /Library/StartupItems/VirtualBox
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[invalid?] com.cisco.anyconnect.gui.plist Support
[invalid?] com.oracle.java.Java-Updater.plist Support
[running] com.parallels.mobile.prl_deskctl_agent.launchagent.plist Support
[invalid?] com.teamviewer.teamviewer.plist Support
[invalid?] com.teamviewer.teamviewer_desktop.plist Support
[loaded] org.macosforge.xquartz.startx.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.cisco.anyconnect.vpnagentd.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[invalid?] com.oracle.java.Helper-Tool.plist Support
[running] com.parallels.mobile.dispatcher.launchdaemon.plist Support
[loaded] com.parallels.mobile.kextloader.launchdaemon.plist Support
[loaded] com.teamviewer.Helper.plist Support
[invalid?] com.teamviewer.teamviewer_service.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
[running] com.parallels.mobile.startgui.launchagent.plist Support
[not loaded] org.virtualbox.vboxwebsrv.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Moveslink2 Application (/Applications/Moveslink2.app)
Quicksilver Application (/Applications/Quicksilver.app)
Google Drive Application (/Applications/Google Drive.app)
Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
Dropbox UNKNOWN (missing value)
EvernoteHelper Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
Internet Plug-ins: ℹ️
SharePointBrowserPlugin: Version: 14.1.3 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
Flip4Mac WMV Plugin: Version: 3.0.0.126 - SDK 10.8 Support
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
User Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 Support
Safari Extensions: ℹ️
AdBlock
OpenIE
Facebook Photo Zoom
Translate
1-ClickWeather
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
7% WindowServer
1% fontd
1% Google Drive
0% Microsoft Database Daemon
0% AppleSpell
Top Processes by Memory: ℹ️
180 MB Google Drive
86 MB mds_stores
86 MB SyncServicesAgent
86 MB Google Chrome
86 MB Finder
Virtual Memory Information: ℹ️
2.25 GB Free RAM
2.84 GB Active RAM
2.56 GB Inactive RAM
936 MB Wired RAM
3.88 GB Page-ins
74 KB Page-outsYou have nearly run out of disk space. Either purchase a larger one or start cleaning out the one you have?
-
here is my etrecheck. Any help is appreciated
Hardware Information:
iMac (21.5-inch, Late 2009)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400 - VRAM: 256 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 1 day 17:29:18
Disk Information:
ST3500418ASQ disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 391.48 GB (245.88 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 107.76 GB (94.95 GB free)
OPTIARC DVD RW AD-5680H
USB Information:
Apple, Inc. Keyboard Hub
Mitsumi Electric Apple Optical USB Mouse
Apple, Inc Apple Keyboard
Seagate FA GoFlex Desk 2 TB
EFI (disk1s1) <not mounted>: 209.7 MB
Time Machine Backups (disk1s2) /Volumes/Time Machine Backups: 2 TB (1.56 TB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Canon MX870 series
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.carbonite.launchd.carbonitedaemon.plist 3rd-Party support link
[System] com.crashplan.engine.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
Launch Agents:
[System] com.carbonite.launchd.carbonitealerts.plist 3rd-Party support link
[System] com.carbonite.launchd.carbonitestatus.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.crashplan.javacheck.plist 3rd-Party support link
[not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist 3rd-Party support link
[not loaded] uk.co.markallan.clamxav.freshclam.plist 3rd-Party support link
User Login Items:
iTunesHelper
Adobe Bridge CS4
CrashPlan menu bar
ClamXavSentry
AdobeResourceSynchronizer
Canon IJ Network Scanner Selector2
Internet Plug-ins:
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.3.8.1 3rd-Party support link
Musicnotes: Version: 1.18.9 3rd-Party support link
AdobePDFViewerNPAPI: Version: 11.0.03 - SDK 10.6 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
Silverlight: Version: 4.0.51204.0 3rd-Party support link
Flash Player: Version: 12.0.0.38 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 11.0.03 - SDK 10.6 3rd-Party support link
EPPEX Plugin: Version: 3.0.5.0 3rd-Party support link
Scorch: Version: 6.1.0 3rd-Party support link
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
WebEx: Version: 1.0 3rd-Party support link
3rd Party Preference Panes:
Carbonite 3rd-Party support link
Flash Player 3rd-Party support link
Flip4Mac WMV 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
/Library/Application Support/Carbonite
CarboniteDaemon: Version: 1.1.14 build 604 - SDK 10.5 3rd-Party support link
CarboniteStatus: Version: 1.1.14 build 604 - SDK 10.5 3rd-Party support link
CarboniteAlerts: Version: 1.1.14 build 604 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.9 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Language Register: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Time Machine:
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 364.60 GB Disk used: 135.61 GB
Destinations:
Time Machine Backups [Local] (Last used)
Total size: 2
Total number of backups: 169
Oldest backup: 2011-04-10 20:10:19 +0000
Last backup: 2014-02-04 22:28:22 +0000
Size of backup disk: Excellent
Backup size 2 > (Disk size 364.60 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
16% Solavant Demo
9% mds
3% CarboniteDaemon
2% WindowServer
2% EtreCheck
Top Processes by Memory:
348 MB firefox
217 MB clamd
135 MB mds_stores
106 MB Mail
102 MB softwareupdated
Virtual Memory Information:
794 MB Free RAM
1.70 GB Active RAM
443 MB Inactive RAM
587 MB Wired RAM
1.13 GB Page-ins
896 KB Page-outsFixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Problem description:
Slow macbook pro
EtreCheck version: 2.1.2 (105)
Report generated December 12, 2014 at 9:28:15 AM EST
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 5 days 1:56:44
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (50.81 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.Logitech.Control Center.HID Driver (2.6.0) [Support]
[not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) [Support]
[not loaded] com.wacom.kext.pentablet (5.0.5) [Support]
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
Parallels: Path: /Library/StartupItems/Parallels
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist [Details]
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist [Details]
[failed] com.apple.coreservices.appleid.authentication.plist [Details]
[failed] com.apple.EscrowSecurityAlert.plist [Details]
[failed] com.apple.icloud.fmfd.plist
[failed] com.apple.lookupd.plist
[failed] com.apple.sbd.plist [Details]
[failed] com.apple.security.cloudkeychainproxy.plist
[failed] com.apple.spindump_agent.plist [Details]
Problem System Launch Daemons: ℹ️
[failed] com.apple.AssetCacheLocatorService.plist [Details]
[failed] com.apple.awdd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.GSSCred.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.periodic-daily.plist [Details]
[failed] com.apple.periodic-weekly.plist [Details]
[failed] com.apple.softwareupdate_download_service.plist [Details]
[failed] com.apple.spindump.plist [Details]
[failed] com.apple.tccd.system.plist [Details]
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist [Details]
[failed] org.cups.cupsd.plist [Details]
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.hp.help.tocgenerator.plist [Support]
[running] com.wacom.pentablet.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[running] com.fitbit.galileod.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
User Launch Agents: ℹ️
[running] com.spotify.webhelper.plist [Support]
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
Microsoft AU Daemon Application (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
Adobe Update Manager UNKNOWN (missing value)
Microsoft Excel Application (/Applications/Microsoft Office 2004/Microsoft Excel)
SpeechSynthesisServer Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
Inspiration 8 Application (/Applications/Inspiration 8/Inspiration 8.app)
Fitbit Connect Menubar Helper Application (/Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Menubar Helper.app)
apple-scc-20141117-121931 UNKNOWN (missing value)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 2.1.0.33 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
AdobePDFViewer: Version: 8.1.0 [Support]
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.1.0 [Support]
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
iPhotoPhotocast: Version: 7.0 - SDK 10.7
User internet Plug-ins: ℹ️
Unity Player: Version: UnityPlayer version 1.6.2 [Support]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
Logitech Control Center [Support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 448.07 GB
Destinations:
Data [Network]
Total size: 2.00 TB
Total number of backups: 59
Oldest backup: 2014-03-12 12:51:24 +0000
Last backup: 2014-12-05 16:47:01 +0000
Size of backup disk: Excellent
Backup size 2.00 TB > (Disk size 498.88 GB X 3)
Top Processes by CPU: ℹ️
3% hidd
0% Fitbit Connect Menubar Helper
0% WindowServer
0% fontd
0% syslogd
Top Processes by Memory: ℹ️
206 MB iPhoto
172 MB Mail
64 MB Safari
60 MB mds
52 MB com.apple.WebKit.WebContent
Virtual Memory Information: ℹ️
49 MB Free RAM
832 MB Active RAM
796 MB Inactive RAM
1.41 GB Wired RAM
45.93 GB Page-ins
1.06 GB Page-outs
Diagnostics Information: ℹ️Macintosh HD (disk1) / : 498.88 GB (50.81 GB free)
You have only about 10 percent free drive space left. 50gB is enough to run the computer but, if it gets much smaller, that can slow how Virtual Memory (VM) works as the system has to more carefully search the remaining space for qualified blocks to which to write data.
Adding RAM will reduce the writes-to-disk by VM but you should probably consider a little holiday disk cleaning of stuff you no longer use.
This concerns me:
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
Microsoft AU Daemon Application (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
Adobe Update Manager UNKNOWN (missing value)
Microsoft Excel Application (/Applications/Microsoft Office 2004/Microsoft Excel)
SpeechSynthesisServer Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
Inspiration 8 Application (/Applications/Inspiration 8/Inspiration 8.app)
Fitbit Connect Menubar Helper Application (/Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Menubar Helper.app)
apple-scc-20141117-121931 UNKNOWN (missing value)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
That is a LOT of log-in items for a compute with 4GB RAM. Some are hard to avoid but Excel is a big program that can be easily launched from the Dock. I don't know what "Inspiration 8" is but likely the same advice will apply. -
How to detect the OS version and the hardware info??
Hi all, according to the project needs, I to know how to detect OS version and the hardware info.
The point is to detect client's OS version, weather Win98, 2000, XP, Vista.
I have been search the information for several days already.
But can not really found a example which returns the OS version like"Windows XP Version 2002 *****".
And also could not find the CPU type such as"Core 2 due, or pentium D".
Is there anyone have done this before?
Thanks.
The Info I need looks like the photo below.
Message Edited by EricLu on 07-21-2009 08:09 PMWell, in fact I have the VI and also read the topics as well...... The searching tag is OS info , system info......... After reading your post, now I understand the relation between the version number and the real OS version now, tks. And another problem is, the processor type returned within the VI have only 4 type:"INTEL 386, INTEL 486, PENTIUM, Unknown".
It can not really return my CPU TYPE. For example the desktop I’m using now is a Pentium, D , 2.80G, 2.80G.. and it only returns type "Pentium". That's why I'm asking is there any other way to do this...... (( Please forgive me if you can not really know what I'm talking about in my first post, now I know how bad my english is....... )) I guess I can only try to find out the solution from the registry then... Thanks for your information and reply.
Message Edited by EricLu on 07-21-2009 09:25 PM
Message Edited by EricLu on 07-21-2009 09:26 PM -
How to associate hardware information into an Oracle Table?
Hi,
I am new on Windows 2000 .
I am using the following script in order to get the windows 2000
hardware information.
I am using 8.1.7 version of ORACLE.
I am using a table "Server Hardware"(Server list,Network Adapter,RAM).
I would like to ask that how should or where should I use this script
in order to associate its information into my table "Server Hardware".
Could someone give me hints that how to use this script?
Thanks
Lee
Following script returns the name and version number of the operating
system installed on a computer
Script Code
strComputer = "."
Set objWMIService = GetObject("winmgmts:" _
& "{impersonationLevel=impersonate}!\\" & strComputer &
"\root\cimv2")
Set colOperatingSystems = objWMIService.ExecQuery _
("Select * from Win32_OperatingSystem")
For Each objOperatingSystem in colOperatingSystems
Wscript.Echo objOperatingSystem.Caption & " " &
objOperatingSystem.Version
NextActually, I am not using Recovery Catalog, so the views like RC_database, Rc_tablespaces etc , which are specific to recovery catalog are not available.
r.- this make sense at 100% because those views belong to the recovery catalog.
So, I wanted that these information, which we can get via using the commands like above, transfer into an Oracle table
r.- If you want to access the views of the Recovery Catalog to store part of that information in tables you have to have the database registered in a Recovery Catalog.
Should we keep the Recovery Catalog in Control file? Instead of using separate Schema.
r.- I recommend you to create a catalog for your database because the space the controlfile to store information regarding RMAN is reused and you can lose important information about your backups.
Can we run Catrman.sql script as a sys in order to keep the recovery catalog in sys schema?
r.- As you know, this is not recommended at all.
Conclusion : Create a Recovery Catalog and you will be able to perform all that you want regardind what you mentioned above.
I have a thread for this:
RMAN ( CATALOG CREATION ) STEP BY STEP by Joel Pérez
Joel Pérez
http://otn.oracle.com/experts -
I have project I want to run and need some information
Hi
I have project I want to run and need some information about technical, consultancy, architecture design
and what I need for this project (hardware and software(
I planning to stream live streaming 24 channels,
The feed is analog from pal STB cable or satellite.
I want to stream in 2 different resolution and bit rates
1. full screen 750-850k
2. 240x360 400-600k
the format is flash h.264
The channels are series, sport, news, and movie.
What recommended card (i have osprey 450e)?
What kind of requirement of computer I need (CPU, MHZ, CORE, RAM).
can i use i7 cpu or xeon cpu?
how many channels i can run in 1 computer?
I need cheap solution for this project around 20-30k$ for hardware.
thnaksI am working on a similar project.
Actually, i can encode 2 streams in h.264 with a resolution around 640X480 on a Intel Xeon E3120 (2 core) 3.16 GHZ configuration.
OS is a windows XP 32 bits. CPU usage is around 75%.
(note: FMLE instances are run with FMLEcmd not GUI mode)
Does someone know if i can gain performance with windows XP 64bits ?
My goal is to encode 4 streams on a single machine, does someone know if a dual CPU, let's say 2 X (4 core) Xeon, is enough ?
I don't know if FMLE support multiple processor with multiple core configuration.
I am maybe wrong, but after reading this forum, it seems many people have problems using FMLE under windows vista. Do we gain performance on Vista vs XP ? -
Unable to obtain hardware information
I am trying to convert a VM from ESXi Free v5.5 using the Standalone Converter and getting the error: Unable to obtain hardware information for the selected machine.
I have tried running the converter with elevated admin privileges and that didn't work. The strange thing is I have done this before and it worked so I'm not sure what's changed on this ESXi server.
I have two VM's. One is Red Hat and the other is Microsoft 2012 Server and both give me the same error. I also tried v5.5 and v6 of the converter.
I can connect to the ESXi server with the vSphere client.
Thanks.Thank you so much!
I didn't think about restarting the PC but that did the trick. I figured reinstalling the software would fix any issues.
Thanks again. -
Number range buffering for dimension tables (DIM IDs) and InfoObjects (SIDs
Hi BW Experts,
How to check whether this number range buffering for dimension tables (DIM IDs) and InfoObjects (SIDs) is Active or not ??
can you please provide me this technical information where to go and check in the system ?
Thanks in Advance.The Early Watch report lists these because of the large number of rows in the MD/Dim tables. Keep in mind though, that Number Range buffering will really only help if you continue to generate a large volume of new SIDs or Dim IDs with ongoing loads, e.g.
If your transactions being loaded to a cube result in several thousand new rows being added a Dim table, then it makes sense to turn on Number Range buffering for that Dim ID. But if the transaction volume is only cause a few hundred DIM IDs to be added, buffering will not really get you anything. -
Need some hardware information about PCI7030/6040E
Hi,
I'm working with LabViewRT and the PCI7030/6040E DAQ board. Everything works very well now, but I need some hardware information about this board for my dissertation. For example what kind of analog/digital converter does the bord use and so on.
Thanks for your help.
Regards,
tobyrtTobyRT,
For questions of this nature, where you are requesting hardware specifications for our data acquisition boards, I would recommend that you contact National Instruments Technical Support.
I recommend that your contact method be via email where you can reach one of our Applications Engineers like myself. Please submit your email request via http://www.ni.com/ask.
Regards,
Justin Britten
Applications Engineer
National Instruments -
Wifi and bluetooth hardware missing in my ipod touch could any one help me to fix it?
wifi and bluetooth hardware missing in my ipod touch could any one help me to fix it?
If the following is your problem try the troubleshooting described within:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
Frequently it is due to hardware problem and an appointment at the Genius Bar of an Apple store is in order.
If that is not your problem then we need more information about hur problem. How do you know the"hardware" is missing?
Maybe you are looking for
-
Error in customer exit variable
Hi All, My requirement is end user will enter fiscal year and in report out put I need to display fiscal year periods. For this I have created two variables 1.Fiscal year-Manual Input/Default value-Single value-Mandetary-Variable is ready for input.
-
How to get the values of managed metadata columnn through object model
Hi, I need to read the values from a managed metadata column, which is set to display entire path. Eg. My value looks like Critical:Important:Interesting:Routine:Not Evaluated without hardcoding these values, can i find which level of child has been
-
Duplex print with Report 6i on SUN Solaris
Dear All, I would like to know if it's possible to print in duplex mode using Report 6i on SUN Solaris. If yes! show me the way.Thanks for help.
-
How do i make http connection from an applet to a servlet
i am not able to make a http connection from the applet to servlet my code for servlet is as follows import java.io.*; import javax.servlet.*; import javax.servlet.http.*; public class newDatabaseServlet extends HttpServlet { // Connection con;
-
Installed tv series and one show will not play
I feel like I am getting the run around... I downloaded to my itunes and installed on my ipod the tv series Big Bang Theory season one. Out of the 17 shows one will not play. I have tried uninstalling it and reinstalling it several times with no suce