IDS Device Manager not working

IDSM2 when on version 4.1.4S48 was working properly. The IDS device manager at address https://<ip address> was working.
After upgrading to 4.1.5S189, it broke the IDS Device Manager. I cannot access the device manager using IE. It says page not found. Also when I use the IDS Event Viewer, I donot see any alarms.

The event manager willnot work with 5.0, the reporting facility (SDE) is not supported in IEV. IDM or VMS/SecMon need to be used to see alarms.
The most common reason for IDM to not work is because permit lists get reset when you upgrade to 5.0. Run setup and ensure that there is a permit statement that includes the machine you are launching IDM from.

Similar Messages

  • 8700c and device manager not working AT ALL

    So I just recently got a Blackberry 8700c and for some reason the device manager does not work at all. Like my computer will make a dadunk noise when I connect my Blackberry via USB cable but it won't register that my blackberry is connected. I cant go to my computer and actually click on my blackberry.
    I have windows vista and the device manager software I am using is the one I got in the box. 4.1
    I am also using AT&T please help.
    All I want to do is be able to connect it to my computer and upload themes and whatever else I want to the phone. But it isn't working
    Solved!
    Go to Solution.

    Do you have Desktop Manager loaded to your PC? You mentioned device manager, but I would recommed Desktop Manager ver 4.7
    Download Desktop Manager from here:
    https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Switch device manager not working no matter what I do

    Hello everyone.  I have just purchassed a 8330 and I am trying to transfer all my contacts from my Palm 690 Centro over the BB.  NOthing I do works...all options are greyed out.  I have the most current software for Palm OS and Hot sync.  Can anyone help me get this done?  Manually added all contacts will be  a PITA!
    Thanks
    Chris

    prasanto wrote:
    Policy (1 entry)
    That may be the problem. Is this a BES-controlled BB? Having an IT Policy typically means that it is. If so, then you need to go see your BES admins for assistance. An IT Policy can block many functions...but I've no way to know if the symptoms you are seeing could be blocked by it or not.
    Let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.

    I have been receiving the following error and instructions to fix it for a long time now, prior to updating to Windows 8.1:
    A device is not working properly
    Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.
     Recommended solution to the problemUse Windows Update to check whether new device drivers are available. Proceed as follows:
    Open Device Manager
    Search in the device manager for the device whose driver you would like to update and double-click on the device name. You may first have to enable the "Show hidden devices" entry in the "View" menu.
    Switch to the Driver tab, click Update driver and follow the instructions
    When I follow the instructions and try to update the driver, I am told "The best driver software for your device is already installed."
    How do I update the driver to stop receiving the error?  
    This question was solved.
    View Solution.

    I have solved the initial problem.    
    I found the solution on the Forum at http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03926756&tmp_task=solveCategory&cc=us&dlc=en&la...

  • Satellite U400-17R - Sound device is not working after installing XP

    Hi there,
    I purchased a U400-17R Model with Vista Home. i Formatted it and installed Windows XP Professional downloading the XP drivers from Toshiba site.
    Everything works but my Sound Device is not working. when i check in the Device Manager the Sound Drivers are there and it says working properly.
    I am Lost...Can anyone please help?

    Hi!
    On Windows XP you have to install two patches from the Microsoft Knowledge Base for high definition audio cards. If you only have SP1 or SP2 you need the patches but if you have SP3 you dont need it because they are a part of SP3.
    Both patches or SP3 must be installed *first* and then the sound driver. So if you have installed the sound driver first you must remove it and then install the patches again. After this it should work with the sound:
    http://support.microsoft.com/kb/835221
    http://support.microsoft.com/kb/888111
    Bye

  • Bootcamp 3.2: Microsoft Virtual WiFi MiniPort Adapter shows "device is not working properly...Code 31"

    Using Windows 7 Enterprise 64-bit, Microsoft Virtual WiFi Miniport Adapter shows the "device is not working properly because Windows cannot load the drivers required for this device. (Code 31).".The device is the Apple iMac10,1 All-in-one computer. Right clicking browse files (for the device) shows the Bootcamp (C:), DVD (D:); and my external hard drives can be selected.
    Internet and WiFi connections all working ok. Am also running MacDrive 8 to access the Mac drives when in the Windows partition, again without any seeming issues.
    Updating the driver simply generates another Code 31 error.
    Appreciate this seems to be a known problem - is the a solution a novice use might be able to follow or should I simply ignore the error message?
    Driver Date us 21/06/2006 and Driver Version is 6.1.7600.16385.

    Hi  ,
    Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 4-1204tx Ultrabook and issues with WiFi adapter is not working properly. Error codes in Device Manager in Windows  8.1 could be fixed by deleting any extra drivers. So I would uninstall all that is listed in the Network drivers in the Device Manager, restart the Notebook. Here is a list of Device Manager options, this might help.
    Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating or reinstalling. Hope this helps. Thanks.

  • HT201413 Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

    Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

    Device does not work when I connect it to my computer to the iTunes program update requests and then gives me an error No. 21

  • TS4036 icloud backup to new device is not working as says I dont have enough storage, even although the backup is only 3GB out of my 5GB (giving more than 1GB available!)???

    back up from icloud to new device is not working as it is saying that I dont have enough storage, when I am only trying to use 3GB out of my 5GB allowance???

    I may misunderstand your post - you "backup TO icloud" or restore from icloud to a new device.  Not sure which of these you mean.
    If backing up TO icloud, the problem may be that there's not enough storage on your device, not icloud, as a device needs a good bit of storage to create the backup.
    If restoring from icloud to a new device and you get the error, the storage referenced must be that on the device, although that doesn't seem possible, since a device has more memory than 5GB.

  • When I connect my ipod touch tomy computer it says that the device will not work because the Apple mobile device hasnt been activated?

    Why does a meesage pop up when I connect my iPod touch saying that the device will not work because the Apple mobile device hasn't been activated?          

    Refer to this article to restart AMDS:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567

  • Password Manager not working with any internet browsers

    I have Thinkvantage password manager installed (v. 3.20.0311.00) on my Thinkpad X201. I am running Windows 7 professional, 64 bit. Password Manager works for all programs except IE8 or Mozilla Firefox (eg. works for Outlook, works for iTunes, etc.). When browsing, the program simply never pops up. It worked previously, and I still have many saved website login details, but it never logs in for me any more and new sites do not activate the program.
    I have made sure that the add-on is enabled and I have checked the box next to "enable 3rd party browser extensions" in the advanced tab of internet options. I have also tried resetting internet explorer settings. As mentioned above, this in not only a problem with IE8; it also occurs with Firefox.
    Any help would be very much appreciated.
    Dr_Rap

    Same problem here. I just recieved mine (Win 7 pro 64 bit, X201 Multitouch) last week and password manager not working at all in ANY web browser. It recorded my .net password just fine, but i can't get it to work in IE8. Who pays this kind of money for something that doesnt work?
    Fix this Lenovo!

  • In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

    In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Password manager not work on new Chrome

    Hi!
    Chrome version 29.0.1547.57m. Password Manager not working...

    We notice password manager is broken by new chrome. 
    Dev is working on fix, please wait for new release of Password Manager to fix this issue.

  • Kaspersky password manager not working on fox 5

    kaspersky password manager not working on the new firefox 5

    Kasperski has finally released a patch that works fine with Firefox 4, 5 and 6, as well as with Google Chrome!!!!
    You can download the patch at the URL [http://support.kaspersky.com/faq/?qid=208284589 Firefox patch for Kaspersky Password Manager]
    You must follow the entire procedure as described by the Kasperski techs... I just tried it, as I had the same problem as you, and it works fine!!!!

  • Audio device is not working, i have installed proper drivers, but audio device is not working

    hi,
    I have installed registery mechanic last week and made a system run in my laptop. After re starting my laptop, my audio devices are not working fine. I have installed the drives correctly and they are reflecting in program lists, how ever the audio device is not working. If I am reinstalled the system,  My audio device is working fine, I have installed a fresh OS, but sitll its not working fine, could you help me to fix this one.

    Tecra A8
    Model No = PTA83L-04C02N
    Can you please tell me from where I need driver so that my "Fn" key will be operation? Right now I tried to use "Fn" with F6 and F7 which suppose to change screen resolutions but nothing is happening.
    Can you please tell me if I reinstall New OS (Windows XP - Sp2) then in which order which driver and Toshiba software I should install?
    Hard to find XP drivers and utilities for that machine, Manoj. But you're in luck because the Asian part-number family PTA83L corresponds to the European PTA83E.
    Go to the European download site and look up the Tecra A8 with Short Model No. PTA83E. You'll find 40 XP drivers, utilities, and BIOS updates.
    Install the Chip Set Utility first, then the Display Driver, and then the other major drivers. Install the Common Module prior to Toshiba utilities and other programs.
    Good luck!
    -Jerry

  • My audio device is not working

     hello
            I don't know the reasone behind it but my audio device is not working but I rember accedentally i uninstail my IDT audio device.

    Hello rasfunkey,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you have uninstalled your audio drivers and require assistance. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Maybe you are looking for

  • How to delete existing "Logical volume" from V880

    i have a V880 server. it have some Logical volume previously. but i want to delete that old Logical volume and then want to create new LV's. so how can i delete the old LV's.

  • OPtimizing Performance for Select query on huge table

    Hi All,    We are fetching a single record from NAST table. The table has around 10 Million Entries.    The Select Query takes around 5-6 minutes to return.    We are not using the Primary key completely. We are using only one field of the primary ke

  • Xerces2 Schema Validation

    I have read several people with the same problem, and someone provided a code sample that is supposed to work for validating XML Schema using Xerces. I tried this sample, and still get an error with the following code: SAXParser sp = new SAXParser();

  • Overexposed images when not

    I got this problem in Photoshop CS3 and Bridge where all RAW/JPGS files appear to be overexposed when they are not. I had my computer repaired and after uninstalling and reinstalling the program, this problem shows up. All video drivers are okay and

  • I don't know my username and password

    because i wasn't the one that installed the OSX.. please help