Ids event viewer alarm

I've many alarms with more than one signature with destination ip address 0.0.0.0 source and destination port 0
how can I intend these messages?

Begin by defining an exclusive filter. Specify the source address, which is the network that is generating large numbers of false positives. Specify all signatures so that no alarms are sent to Security Monitor. Next, define an inclusive filter. Specify the same source address but specify Signatures which are the ones that you want to include.

Similar Messages

  • IDS Event viewer error

    Hi All
    Please help me out with this .I am getting attached IDS Event viewer error while trying to install it .Please let me know the probable causes and how to rectify the same
    Regards
    Ankur

    At what stage of installation are you seeing this error?
    It appears that a SSL certificate has expired, or an applet has a digital signature based on a certificate that has recently expired.
    If you can provide recreation steps then we can figure out what certificate is expiring, and determine the next steps in resolving your issue.
    Without knowing anything else my best guess at this point is that the SSL certificate on your sensor has expired. If the sensor has been deployed in your network for over a year, then this jsut could be the standard expiration of the SSL certificate on your sensor. Try conneting from a web browser directly to your sensor. When your web browser connects it should warn you if the sensor certificate is expired. If this is the case then ssh or telnet to the sensor and execute: "tls generat-key" to enforce the creation of a new SSL certificate for your sensor.
    If the error is not from an expired SSL certificate, then it is from other certificate or digital signature and we will need to try and recreate in our lab.
    Once you provide us with re-create steps, then there is something you might try for a short term solution as we try to re-create.
    You might try setting the date/time on your PC to a few days ago. The certificate appears to have expired on April 23rd so setting it back to April 20th may make the error go away. I am not positive this will work, but may be worth a shot if you need access immediately and can't wait a day or 2 as analysis is done. This is not a permanent solution and would just be a temporary workaround as we try to analyze what certificate is expiring.

  • How to dowload IDS event viewer 4.1?

    Dear Sir,
    I have IDS 4215 now I can access to IDM by IE6 but I don't know how to dowload IDS event viewer.
    Can you help me,
    Thanks very much
    NhuongPham

    The addition of IEV and the IEV signature updates made the sensor updates to large (sometimes doubling the size of the updates).
    We have several customers that are monitoring sensors on a global network.
    Many of the sensors are connected through low bandwidth connections.
    The large updates were causing delays in getting signature updates loaded on these remote sensors.
    It became a priority to reduce the size of the updates needing to be pushed to the remote sensors.
    These customers are generally using Security Monitor rather than IEV because of the large number of sensors being managed.
    So the customers who were not using IEV were having problem because of the additional IEV files having to be pushed to their sensors when they would never use these IEV files.
    So it was decided to remove the IEV updates from the sensor updates and separately post these on CCO.
    IEV customers were already having to make 2 downloads: the sensor update download from CCO, and the IEV download from the sensor.
    So now both downloads are just made from CCO.

  • CiscoWorks VMS Event Viewer usage compared with MARS

    I've been using VMS Security Monitor Event Viewer to monitor IPS sensors for the past few years. I'm used to the workflow of reviewing events in Event Viewer and then resolving them and sometimes removing them from the grid.
    I'm beginning to use MARS and I'd like to know what the equivalent of resolving and removing from grid in MARS is or is this something you don't do in MARS and you work differently with the events in MARS?
    Thanks in advance

    The actual replacement for the IDS Event Viewer is the IPS Manager Express (IME) and not MARS. If you are looking for real-time monitoring and filtering of events for upto 5 sensors, then IME is the way to go. MARS is more of a SIM/SEM tool that collects logs from 'various' devices and 'correlates' those events into meaningful 'incidents'. It does the same for IPS devices. But you won't see 'every' event in the MARS Incidents page (as every event is not an incident). You have to run a query for that (Historical or real-time).
    Regards
    Farrukh

  • Multiple Event Viewer Error Ids, Corrupt Catalogs, System not working right. Please help.

     Since I could not find a list of the Event Ids that was accurate at all or not too general as to be useless and Microsoft won't let us know how to fix these ourselves without having a programming degree, I am begging for help from anyone who can help
    me get my computer working right again. I have some important things to get done which I can't do without my computer working. I have tried to get what I could get but I am blocked from many files which makes it difficult to get info. Please help. I appreciate
    any help I can get. Thank you,
    WhiteFox42
    I am not sure which one is more important.
    Event id 20
    Installation Failure: Windows failed to install the following update with error 0x80070643: Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2 for x64-based Systems
    (KB2468871).
    Event id 11
    Possible Memory Leak.  Application (C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted) (PID: 476) has passed a non-NULL pointer to RPC for an [out] parameter marked [allocate(all_nodes)].  [allocate(all_nodes)] parameters are always
    reallocated; if the original pointer contained the address of valid memory, that memory will be leaked.  The call originated on the interface with UUID ({3f31c91e-2545-4b7b-9311-9529e8bffef6}), Method number (20).  User Action: Contact your application
    vendor for an updated version of the application.
    Event id 455
    taskhost (1348) WebCacheLocal: Error -1811 (0xfffff8ed) occurred while opening logfile R:\User\App Data\Roaming\Microsoft\Templates\Local\Microsoft\Windows\WebCache\V01.log.
    Event Xml:
    Event id 505
    wuaueng.dll (1012) SUS20ClientDataStore: An attempt to open the compressed file "C:\Windows\SoftwareDistribution\DataStore\DataStore.edb" for read / write access failed because it could not be converted to a normal file.  The open file operation
    will fail with error -4005 (0xfffff05b).  To prevent this error in the future you can manually decompress the file and change the compression state of the containing folder to uncompressed.  Writing to this file when it is compressed is not supported.
    Event id 513
    Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object
    Event id 1000
    Faulting application name: IEXPLORE.EXE, version: 11.0.9600.16428, time stamp: 0x525b664c
    Faulting module name: IEFRAME.dll, version: 11.0.9600.16476, time stamp: 0x52944cf2
    Exception code: 0xc0000005
    Fault offset: 0x00025f1d
    Faulting process id: 0x1854
    Faulting application start time: 0x01cf0735f0e5f0c7
    Faulting application path: C:\Program Files (x86)\Internet Explorer\IEXPLORE.EXE
    Faulting module path: C:\Windows\system32\IEFRAME.dll
    Report Id: e3dc1e9a-733f-11e3-b920-00215a2af202
    Event id 1000
    Faulting application name: msiexec.exe, version: 5.0.7601.17514, time stamp: 0x4ce79d93
    Faulting module name: msvcrt.dll, version: 7.0.7601.17744, time stamp: 0x4eeb033f
    Exception code: 0xc0000005
    Fault offset: 0x00000000000035e1
    Faulting process id: 0x1030
    Faulting application start time: 0x01cf01b77867a358
    Faulting application path: C:\Windows\system32\msiexec.exe
    Faulting module path: C:\Windows\system32\msvcrt.dll
    Report Id: f7253b17-6daa-11e3-b944-00215a2af202
    Event id 1002
    Computer:      w7mar-64  "I don't know why it has computer as this when it should not be."
    Description:
    The IP address lease 192.168.200.195 for the Network Card with network address 0x08002742F261 has been denied by the DHCP server 192.168.200.1 (The DHCP Server sent a DHCPNACK message).
    Event id 1008
    The Windows Search Service is starting up and attempting to remove the old search index {Reason: Index Corruption}.
    Event id 1008
    Computer:      w7mar-64
    Description:
    An errorUser:          LOCAL SERVICE
     occurred in initializing the interface. The error code is: 0x2.
    Event id 1014
    User:          NETWORK SERVICE
    Computer:    
    Description:
    Name resolution for the name wpad.westell.com timed out after none of the configured DNS servers responded.
    Event id 1015
    User:          N/A
    Computer:      w7mar-64
    Description:
    Event ID 1013 for the Windows Search Service has been suppressed 7 time(s) since 12:04:10 PM. This event is used to suppress Windows Search Service events that have occurred frequently within a short period of time.  See Event ID 1013 for further details
    on this event.
    Event id 1015
    Failed to connect to server. Error: 0x8007043C
    Event id 1018
    The description for Event ID 1018 from source EvntAgnt cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    Event id 1020
    Updates to the IIS metabase were aborted because IIS is either not installed or is disabled on this machine. To configure ASP.NET to run in IIS, please install or enable IIS and re-register ASP.NET using aspnet_regiis.exe /i.
    Event id 1028
    Windows Installer has determined that its configuration data cache folder was not secured properly. The owner of the key must be either Local System or Builtin\Administrators. The existing folder will be deleted and re-created with the appropriate security
    settings.
    Event id 1101
    .NET Runtime Optimization Service (clr_optimization_v4.0.30319_32) - Failed to compile: System.Web.Entity.Design, Version=3.5.0.0, Culture=Neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil . Error code = 0x80010108
    Event id 1500
    The description for Event ID 1500 from source SNMP cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    Event id 1530
    Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards. 
    Event id 1530
    Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.  
     DETAIL -
     6 user registry handles leaked from \Registry\User\S-1-5-21-2959539970-205720217-4182857889-1000:
    Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software
    Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Microsoft\Windows\CurrentVersion\Internet Settings
    Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Microsoft\Windows\CurrentVersion\Internet Settings
    Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings
    Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Microsoft\Internet Explorer\Main
    Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Policies
    Event id 3028
    Context: Windows Application, SystemIndex Catalog
    Details:
        The content index catalog is corrupt.  (HRESULT : 0xc0041801) (0xc0041801)
    Event id 3029
    Context: Windows Application, SystemIndex Catalog
    Details:
        The content index catalog is corrupt.  (HRESULT : 0xc0041801) (0xc0041801)
    Event id 3036
    The content source <csc://{S-1-5-21-2959539970-205720217-4182857889-1001}/> cannot be accessed.
    Event id 3036
    No protocol handler is available. Install a protocol handler that can process this URL type.  (HRESULT : 0x80040d37) (0x80040d37)
    Event id 4104
    Description:
    The backup was not successful. The error is: Access is denied. (0x80070005).
    Event id 4228
    TCP/IP has chosen to restrict the scale factor due to a network condition.  This could be related to a problem in a network device and will cause  degraded throughput.
    Event id 4321
    The name "WHITEFOXPC     :0" could not be registered on the interface with IP address 192.168.1.21. The computer with the IP address 192.168.1.19 did not allow the name to be claimed by this computer.
    Event id 4373
    The description for Event ID 4373 from source NtServicePack cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    Event id 4879
    MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system WHITEFOXPC.
    Event id 6000
    The winlogon notification subscriber <GPClient> was unavailable to handle a notification event.
    Event id 6006
    The winlogon notification subscriber <TrustedInstaller> took 186 second(s) to handle the notification event (CreateSession).
    Event id 7000
    The Windows Audio service failed to start due to the following error:
    A privilege that the service requires to function properly does not exist in the service account configuration. You may use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view
    the service configuration and the account configuration.
    Event id 7001
    The Computer Browser service depends on the Server service which failed to start because of the following error:
    The dependency service or group failed to start.
    Event id 7010
    The index cannot be initialized.
    Details:
        The content index catalog is corrupt.  (HRESULT : 0xc0041801) (0xc0041801)
    Event id 7023
    The Block Level Backup Engine Service service terminated with the following error:
    %%-2147024713
    Event id 7024
    The Windows Search service terminated with service-specific error %%-1073473535.
    Event id 7026
    The following boot-start or system-start driver(s) failed to load:
    aswKbd
    aswRvrt
    aswSnx
    aswSP
    aswTdi
    aswVmm
    discache
    spldr
    Wanarpv6
    Event id 7030 & 7031
    The dldw_device service is marked as an interactive service.  However, the system is configured to not allow interactive services.  This service may not function properly.
    Event id 7032
    The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Windows Installer service, but this action failed with the following error:
    An instance of the service is already running.
    Event id 7040
    The search service has detected corrupted data files in the index {id=4700}. The service will attempt to automatically correct this problem by rebuilding the index.
    Event id 7042
    The Windows Search Service is being stopped because there is a problem with the indexer: The catalog is corrupt.
    Details:
        The content index catalog is corrupt.  (HRESULT : 0xc0041801) (0xc0041801)
    Event id 8210
    An unspecified error occurred during System Restore: (Installed Java 7 Update 45). Additional information: 0x80070003.
    Event id  9000
    The Windows Search Service cannot open the Jet property store.
    Details:
        0x%08x (0xc0041800 - The content index database is corrupt.  (HRESULT : 0xc0041800))
    Event id 10005
    DCOM got error "1084" attempting to start the service MSIServer with arguments "" in order to run the server:
    {000C101C-0000-0000-C000-000000000046}
    Event id 10010
    15 of these with different server codes which I can't copy unless I copy all the details.
    The server {3EEF301F-B596-4C0B-BD92-013BEAFCE793} did not register with DCOM within the required timeout.
    Event id 12348
    Volume Shadow Copy Service warning: VSS was denied access to the root of volume \\?\Volume{8e79517c-6c41-11e3-b621-cb03f0618d54}\. Denying administrators from accessing volume roots can cause many unexpected failures, and will prevent VSS from functioning
    properly.  Check security on the volume, and try the operation again.
    Event id 15006
    9 of these.
    Description:
    Owner of the log file or directory \SystemRoot\System32\LogFiles\HTTPERR\httperr1.log is invalid. This could be because another user has already created the log file or the directory.
    Event id 31004
    33 of tese.
    The DNS proxy agent was unable to allocate 0 bytes of memory. This may indicate that the system is low on virtual memory, or that the memory manager has encountered an internal error.
    The End.
    Kimberly D. White-Fox

    Please provide a copy of your System Information file. Type System Information in the Search Box above the start Button and press the ENTER key
    (alternative is Select Start, All Programs, Accessories, System Tools, System Information). Select File, Export and give the file a name noting where it is located. The system creates a new System Information file each time system information is accessed.
    You need to allow a minute or two for the file to be fully populated before exporting a copy. Please upload to your Sky Drive, share with everyone and post a link here. Please say if the report has been obtained in safe mode.
    Please upload and share with everyone copies of your System and Application logs from your Event Viewer to your Sky Drive and post a link here.
    To access the System log select Start, Control Panel, Administrative Tools, Event Viewer, from the list in the left side of the window select Windows
    Logs and System. Place the cursor on System, select Action from the Menu and Save All Events as (the default evtx file type) and give the file a name. Do the same for the Applications log. Do not provide filtered files.
    For help with Sky Drive see paragraph 9.3:
    http://www.gerryscomputertips.co.uk/MicrosoftCommunity1.htm
    Some Event Viewer reports are generated solely because the computer is in safe mode or safe mode with networking. You have at least one example of this in your long list. If you do not see the same report for a time when
    the computer was in normal mode then it can be disregarded.
    You will find some general advice on interpreting Event Viewer reports here:
    http://www.gerryscomputertips.co.uk/syserrors5.htm
    Hope this helps, Gerry

  • Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231.

    Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231. 
    We restart the excel service app and it solves. Looking for permanent solution.
    Regards,
    Kunal

    To resolved the issue do a simple restart. 
    Restart the server
    Before restarting, verify that this problem occurs often. It may be an intermittent problem that is automatically corrected and does not require you to restart the server.
    If the problem occurs often, restart the server running Excel Services Application.
    If the problem continues to occur often, and restarting the server did not correct the problem, confirm that the hardware of the server is functioning correctly, or reinstall Excel Services Application and re-add the server to the server farm.
    Here's the article with the explanation: Error communicating with Excel Services
    Application - Events 5231 5239 5240
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • Custom alarm and event view

    Hello
    I tried to create custom alarm&event view. I used "read alarm.vi" and "format alarm data.vi" to fill multicolumn listbox where i changed columns names.  Why alarms disapear when they are not active anymore? How can i change that? I would like to have all alarms in table, new and old ones. How can I change colors when alarm is active, inactive or ack?
    thanks

    Hi
    I did it, but... There is always but. I've changed columns names, switch position of 1st and 2nd, and 3rd and 4th column, and alarms in different state have different color. But its not working properly. Few seconds table is changed and few seconds in not. Maybe my PC is too slow, or is it something else. Please look at picture in attachment. Is there easier way to do it?
    Thanks
    Attachments:
    alarmi.JPG ‏113 KB

  • Essential event viewer bugs with "Forwarded Events" log in Windows Server 2008 R2 and Windows 7

    To my general experience, Windows event viewer is one of the most problematic, faulty management tools in the case of extensive use of its more sophisticated capabilities. The sole description as well as reproduction of some entangled failures would require
    remarkable effort.
    With the "Forwarded Events" log however, the situation becomes particularly worse in that even simple functionality fails and workarounds are difficult to find. That’s what I’ll describe here in order to share my experience with interested users.
    For precision: I’ve extensively used event viewer on a German Windows Server 2008 R2 SP1 (Windows SBS 2011 Standard SP1). The bugs I found on that system, I could reproduce on a German Windows 7 Professional 64-Bit SP1, too.
    Problem 1: Failure of even simple event filtering
    To reproduce this problem, execute these steps on a test machine with any of the two OS mentioned above:
    (i) To prepare log contents, do either of the following:
    (a) populate some events to your local "Forwarded Events" log (most simply by subscribing events from other logs of the same machine; stop subscription if you have collected some events)
    Or
    (b) copy a non-empty log file "ForwardedEvents.evtx" from another machine (with any of the two OS mentioned above) to your test machine and open the file in event viewer.
    (ii) Navigate to your "Forwarded Events" test log and open the filtering dialog. In the "Includes/Excludes Event IDs" field, type: 1-9000. Click OK.
    (iii) Look at the results pane: Surprise, 0 Events! Do you really have no event IDs between 1 and 9000 in your test log?
    (iv) Another example, if you have forwarded security events in your test log: Clear filter, if any previous filter is in place. Open the filtering dialog. In "Keywords" sub-dialog, choose "Audit Success". Click OK.
    (v) Look at the results pane: Surprise, 0 Events! Do you really have no successful security monitoring events in your test log?
    I’ll finish here. If you have a rich variety of events in your test log available, let your imagination run wild to test around. Finally include some simple manually created or modified XPath filters on the XML tab of the filtering dialog. I promise, you’ll
    find a lot of additional strange results.
    Problem 2: Cannot save manually selected events to .evtx file
    Navigate to your "Forwarded Events" test log. In the results pane, select one or more events by highlighting them by mouse clicks. In context menu, choose "Save selected events". In the "save as" dialog, choose file type *.evtx
    and save your file. Open the newly created file in event viewer. Result: Surprise, no events inside the new file!
    Have more fun with forwarded events
    Helmut

    Did you mean that right click Forwarded Event and select "Filter Current Log..."? Since I can filter correct event vai the "Filter Current Log..." in my Lab environment.
    Hi Justin,
    yes, I mean "Filter Current Log ... " (in my German systems: "Aktuelles Protokoll filtern ... ").
    What do you mean with "my Lab environment" exactly?
    In the meantime, I performed additional tests. I copied the "ForwardedEvents.evtx" test file from Server 2008 R2 resp. Windows 7 to
    (i) German Windows 8 Pro 64-Bit RTM
    (ii) German Windows 8.1 Pro 64-Bit, up-to-date
    in order to view and filter the file there.
    Results: Same event viewer problem on Windows 8 RTM, but correct behavior on Windows 8.1!
    Best regards, Helmut

  • IDSMC 2.0.1 How to see the total IDS Events in Database

    If I:
    1.
    In "Security Monitor" - "Data Management" - "Database" - "Rules" specify a trigger condition "Notify via e-mail" and set the trigger action "Total IDS events in database exceed" to 50000
    2.
    Then in the "Security Monitor" - "Monitor" - "Events" - Lanch Event Viewer with "Event Start Time" set to "At Earliest".
    3.
    And deletes all events from database. Then after a while the trigger action for 50000 IDS events is triggered and send the e/mail notification even though I only see a few thousand event in the in the Security Monitor.
    4. Is this a bug (that the Security Monitor only show a few thousand events) or is the another way to see the total number of IDS events in the database ?
    Thanks
    Gert

    This document should explain it better,
    http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/mon_sec/secmon20/ug/ch04.htm#wp322337

  • Batch file seetup to run in event viewer not working.

    Hi everyone,
    Long story short
    we have some new Security monitoring software that we use for our clients WHich is written in .net2 and can't pick up the IDs for failures in event viewer as they are in .net4. so what we have done is set up a series of batch files to run through task scheduler
    and send the event ID to Application in event viewer that o ur security  monitoring software can read.
    This has worked perfectly on all of our servers but for some reason on Windows 7 machines when the batch file is run nothing happens in Application under Event Viewer.
    e.g:
    Trigger                    Details                                                                                                                                     
    Status
    On an event            On event- Log:Microsoft-WindowsBackup, Source: Microsoft-WindowsBackup, Event ID100   Enabled
    Action                      Details             
    Start a program       "C:\PandMon\Microsoft Backup Failure ID100.bat"
    This is the batch file:
    eventcreate /ID 100 /L APPLICATION /T information /SO Backup /D "Microsoftsoft SBS Backup Failed - Id 100"
    Any help here would be greatly appreciated.
    Cheers :)

    Your first step must be to check if the batch file actually runs, e.g. like so:
    @echo off
    if not exist c:\Logs md c:\Logs
    echo %date% %time% >> c:\Logs\Log.txt
    eventcreate /ID 100 /L APPLICATION /T information /SO Backup /D "Microsoftsoft SBS Backup Failed - Id
    100" 1>>c:\Logs\Log.txt 2>>&1
    echo. >> c::\Logs\Log.txt
    When you examine the log file then you probably get a good idea about the cause of your problem.

  • IPS Event Viewer settled in CSM

    Hi,
    I am working on preparing CSM to launch
    it until June, so I am in quite hurry.
    Morevoer I have got in trouble with IPS Event Viewer,
    so if you have any clues after checking the below`s explaination,
    Please let me have.
    1)Situation
    -testing CSM(3.1) and IPS Event Viewer(ver5.2)
    -made a test environment, in which a
    IPS is connected to CSM and let IPS
    break out alarms, to check if IEV is
    working well
    2.problem
    -No events are registered on the real-
    time table even though some events are
    being updated on Dashboard in real time.
    3.question
    -What is the wrong.
    -What is the solution.
    if you want any further information of
    this problem, please ask me.
    Thank You.

    hello,
    i am having the same problem , have you managed to solve it.
    Appreciate your help.

  • Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

    Error on load: System.IO.IOException: The process cannot access the file
    '\\server1\SCANSHARED\.pdf' because it is being used by another process.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
       at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
       at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
    I faced this  error in event viewer  when users want to view documents from this third party deployed scan solution
    here I have two WFS servers  and they configured with load balancing in F5 .
    when I enable both servers in F5 I receive this error messages in 2nd server,
    when users want to view documents
    adil

    Do you have antiVirus installed on the sharepoint servers?
    These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
    are uploaded.
    Please follow this KB and exclude the folders from Scanning.
    http://support.microsoft.com/kb/952167
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • No sound, explorer.exe not starting, no event viewer

    I set up a new PC recently and installed Windows 7 Pro. Approximately once every few days I get a problem which, oddly, has several seemingly different manifestations. I mean that if I see one of these, all the others can be observed as well, until I reboot.
    These manifestations are:
    Windows Media Player will not play an audio file (.wav, .mp3), usually just hanging. VLC player will not hang but will not produce sound either. Video content is played OK though.
    Explorer (if started by left clicking on the toolbar button) will bring up the message “Invalid signature” and won’t start. If started by right clicking and then selecting one of the folders in the “last used” list it will start OK though.
    Computer – Manage will dim screen and display a UAC message (normally it would start straight away). After getting through this message, the “Computer Management” window will duly pop up, but it will be missing the Event Viewer item in the left panel.
    I could find nothing suspicious in the event logs.

    I'm adding another image: Task Manager:
    I thought it's worthwhile because total CPU usage shows 12% (and it stayed for a while around that value), but each individual process was consuming 0%.
    There were a few error messages in Application and System logs but I think I saw them quite often, so they were not specific for this occasion. They are:
    WMI error:
    Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events
    cannot be delivered through this filter until the problem is corrected.
    User Profile Service warning:
    Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.  
     DETAIL - 
     10 user registry handles leaked from \Registry\User\S-1-5-21-1620775572-3903616698-3239891420-1000:
    Process 880 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000
    Process 880 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000
    Process 2060 (\Device\HarddiskVolume2\Program Files (x86)\Common Files\Ahead\Lib\NMIndexingService.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Ahead\Nero Home\MediaLibrary\Scanner
    Process 2060 (\Device\HarddiskVolume2\Program Files (x86)\Common Files\Ahead\Lib\NMIndexingService.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Ahead\Nero Home\MediaLibrary\Scanner
    Process 2060 (\Device\HarddiskVolume2\Program Files (x86)\Common Files\Ahead\Lib\NMIndexingService.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Ahead\Nero Home\MediaLibrary
    Process 2060 (\Device\HarddiskVolume2\Program Files (x86)\Common Files\Ahead\Lib\NMIndexingService.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Ahead\Nero Home\MediaLibrary
    Process 2060 (\Device\HarddiskVolume2\Program Files (x86)\Common Files\Ahead\Lib\NMIndexingService.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Ahead\Nero Home\MediaLibrary
    Process 880 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Microsoft\SystemCertificates\My
    Process 880 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Microsoft\SystemCertificates\CA
    Process 880 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Microsoft\SystemCertificates\Disallowed
    Search error:
    Unable to initialize the filter host process. Terminating.
    Details:
    This operation returned because the timeout period expired.  (HRESULT : 0x800705b4) (0x800705b4)
    Distributed COM error:
    The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID 
    {C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
     and APPID 
    {344ED43D-D086-4961-86A6-1106F4ACAD9B}
     to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
    Service Control Manager error:
    A timeout was reached (30000 milliseconds) while waiting for the Optimizer Pro Crash Monitor service to connect.
    Service Control Manager error:
    The Windows Modules Installer service terminated with the following error: 
    The handle is invalid.

  • Events show pictures in Events view but have no contents when opened

    Hi. Using iPhoto 9.5.1 with Mavericks 10.9.1 with library storage on Mavericks Server. When I go to Events view (under Library on the upper left navigation panel) I see events and on each I can hover over and scroll through and see the pictures. When I double click to open the event, no photos show. When I go to Photos view I see the pictures.
    Thoughts on what to do? Thanks.

    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.

  • How do you change the Event Viewer archive location in Server 2008 R2?

    We're wanting to redirect the security and system event viewer logs to the D:\ on a Server 2008 R2 box
    We've got the current logs to save there, however all archived system/security logs are still being saved on the c:\ in their default location in %windir%\system32... and killing the OS partition.
    I can write something up in PoSh and schedule it, but I'd rather use any built-in capabilities first...
    I've taken a peek in the HKLM\Services\CurrentControlSet... hive where the event viewer behavior is configured and do not see an option to set a path for the archive location...

    Unfortunately, you cannot customize the location of archived event logs in Windows. The logs will always be archived to %windir%\system32\Winevt\Logs\Archive-xxxxxx
    There'd be some scripts can help you automatically archived logs to another location. You can find them here: http://gallery.technet.microsoft.com/scriptcenter/site/search?f%5B0%5D.Type=RootCategory&f%5B0%5D.Value=security
    Regards,
    Zhang     
    TechNet Subscriber Support
    If you are
    TechNet Subscriptionuser
    and have any feedback, please send your feedback here.

Maybe you are looking for