IDS vs Batch Setup
Hi,
We have a scenario wherein we produce Outputs only in On-demand mode - one policy per extract coming in from the Upstream online. We do not have any batch cycle need. Currently the Documaker System is setup in 11.3 Batch mode and not with IDS. Whenever a policy comes in, the extract file will be sent to server thru ftp and this triggers multi-step DAP EXEs for processing.
What I feel is, this is not a scalable one. And, setting up an IDS v2.2 with a single step processing would be the apt solution. But I don't have any facts given about this in the Oracle Rule book or IDS Hand book. Can some one correct me if I am wrong. or provide me some technical details to substantiate my analysis.
Thank you.
NGarga wrote:
Thank you so much for the quick reply Andy.
I understand that IDS solution is scalable. My question is setting up Documaker in batch mode for processing one transaction per file that too to process on-demand request: Is that a scalable solution?
Thanks so much.Running Documaker in batch mode to process a single extract is technically scalable, but only vertically. You could add copies of Documaker and create separate directories and INI files etc so that each instance of Documaker does not interfere with each other, and then you could have some sort of process that distributes the single extracts to each instance of Documaker using some sort of round-robin algorithm, and then you could try to figure out which instance processed a job when you have to troubleshoot, and then you have to worry about distributing changes to INI files etc when updates are necessary....
Yes, you could do all of that, or you could hitch Documaker up to IDS and then it scales automatically both vertically and horizontally, and doesn't require all that mess of configuration. Yes, there is some configuration, but it's all straight-forward, documented, and best of all, time-tested. IDS/RP batch-of-one solutions have been around for quite a few years and there are many large operations running this way. You'll find it the best solution for batch-of-one, that is, until you get to Documaker Enterprise Edition (12.0) and the Document Factory. That, by far, is the pinnacle of document processing, IMO. (Yes, I'm biased because I'm on the development team).
-Andy
Similar Messages
-
Copy the from am unsaved goods receipt PO udf into a batches setup
I am trying to copy the value from a from a goods receipt PO udf that is not yet saved into a batches setup screen through a formatted search . The batches setup opens when i press the add button in the goods receipt PO because the item uses batch numbers. Because the goods receipt PO is not the current screen, I cannot use variables. Any idea?
I had exactly the same requirement and this is how I solved it.
You will not be able to use a formatted search as the context window when the batches / serial window opens is different and the field from the GR PO are not available.
You need to create a temp table and write a formatted search to insert the value that you want to carry to the Bacth screen from the GR PO on the refresh of the Item Name or whatever in your case. (If you give me the exact details I can give you the steps)
Once you open the Batch screen the Goods Receipt PO number is available on the top which you can use as referesh to fetch the data from the temp table.
One more important NOTE: As you know the Goods Receipt No can be the same for more than one user because SBO gives you the next available number. To get the record exactly pertaining to that user, when writing the data from GR PO you should also insert the $[USER] value which identifies the user. You may compare this when fetching the data from the temp table on the Batch screen.
Let me know if you need further direction or help
Suda -
To bring the udf in GRPO to batch setup
hi,
In GRPO i like to bring the value displayed in UDF field to the existing field in batch setup window (which will be displayed whil pressing ctrl + tab in quantity column.) in runtime.can anyone help me!!!Hi
You can't do this using 'Formatted Search Queries' as both the forms are different.
We have done some like this:
We had a UDF called 'U_SerialNo' in A/R Invoice. We wanted to Copy the SerialNo from the SerialNumber screen to the A/R Invoice.
We did this using the 'SP_TransactionNotification' stored procedure.
Your requirement is almost same. I feel you can try out this Stored Procedure. -
Hi,
I am wondering if there is any implication to the following.
Presently we have a batch class setup in our Asia Pacific region (let say this batch class is called A, and it has 5 characteristics), and we plan to roll out one project to one of our plant in one country. However, there is a requirement to setup a new batch class with different specification (hence, we call it batch class B and it has 12 characteristics associate with it).
Background:
This plant does have interplant business transaction with other plants which are using batch class A
This plant sharing the material master with other plants.
Questions:
1 - If we decide to endorse the idea of using this batch class B for this new plant rollout, may I know if there is any implication, in term of system setup conflict, or business process in term of batch classification?
2 - Would it be better that this new plant use the batch class A which every plants in the region are using Or continue to use batch class B?
Thanks
TuffPlease consider OSS note 115581 (No multiple classification for batches) before designing a new class.
-
Batch setup of multiple managed accounts in OsX SL client?
I would like to generate 100 managed accounts on a machine running OsX Snow Leopard client. I don't have OsX server. Is there any way to create accounts by importing them into Snow Leopard? I could generate account credentials (with random passwords) externally and then import them for best effect - but I can't see to find if there is a way to do this in SL. Any observations or advise? TIA
Message was edited by: Arthur BusbeyI would like to generate 100 managed accounts on a machine running OsX Snow Leopard client. I don't have OsX server. Is there any way to create accounts by importing them into Snow Leopard? I could generate account credentials (with random passwords) externally and then import them for best effect - but I can't see to find if there is a way to do this in SL. Any observations or advise? TIA
Message was edited by: Arthur Busbey -
Alert based on Batch Expiration Date
Scenario:
Batch Managed Items
Type: for every transaction
Goods receipt PO > Batch setup window > "Expiration date" ( activate expiration date field from form settings) > set date
Requirement:
An alert to be sent to the purchase dept. user 10 days prior to the defined "expiration date" (in the batch setup window)
vijay
Edited by: SU Vijay on Oct 6, 2008 3:42 PMUse this query
SELECT T0.[ItemCode], T0.[ItemName],T0.[BatchNum], T0.[WhsCode],
T0.[ExpDate],datediff(dd,getdate(),T0.[ExpDate]) as 'Days to Expire'
FROM OIBT T0 where datediff(dd,getdate(),T0.[ExpDate]) =10 -
How can I eliminate duplicate Batch Numbers?
SBO allows serial numbers to be unique, but not batch numbers. The system allows the same batch number to be used for a different part. I have a medical company that requires unique Batch numbers accross the board, regardless of part number. Any suggestions? I tried to do this with a formatted search that would identify a duplicate Batch for me, but my search crashed and burned.
Here is the Formatted Search I tried to connect to the Batches Setup Form:
SELECT 'Batch allready used!' FROM IBT1 T0 WHERE T0.[BatchNum] = $[$3.3.0]
Anyone out there know how to force unique batch numbers?
Thanks!
Mike
Edited by: Mike White on May 7, 2008 7:07 PMWhat I am saying is, I never want a duplicate Batch number even if the parts are different. In your example, Item A could not have the same Batch number as Item B. Unfortinately, SBO allows duplicate batch numbers as long as the part numbers are different.
The reason for this is two fold. 1) This medical company cannot, never have the same batch number, and 2) reporting from the OIBT and IBT1 tables gets a bit complicated with duplicate batch numbers.
So my thought is to simply create a formatted search which runs from the Batches Setup Form, checking to see if this Batch Number has allready been used, then replacing the entry if TRUE with something like "Batch Allready Assinged".
Mike
Edited by: Mike White on May 7, 2008 7:36 PM -
Comparison of batches based on their characteristics
Hello
I have say 5 characteristics for material batch setup. I wanted to list of out all the batches (say materials) based on characteristics. Is there any standard transaction available for this. Right now I am using BMBC but not meeting my requirement.
Ex: I have color as one of the characteristics for my batch. I want to list of all materials with batch numbers whose color is red.
ThanksHi,
Please check these tables
MCHA Batches
MCH1 Batches
MCHB Stock: batches
CABN Characteristics ( o.a. batch/vendor)
CABNT Characteristics description
CAWN Characteristics ( o.a. material)
CAWNT Characteristics description
AUSP Characteristic Values
Class types and objects :
TCLAO Several class types for object
TCLA Class types ( vb. lfa1 => v10 en 010)
TCLAT Class type text
TCLT Classifiable objects
TCLC Classification status
Links:
INOB Link between Internal Number and Object
KLAH Class header data
KSSK Allocation Table: Object (vb.matnr) to Class
KSML Characteristics for a class (internal number)
Regards,
Raj. -
Hi there,
my customer controls the stock they manufacture with batch numbers.
The customer wants the due date of the production order to be inserted in the manufacturing date field on the batches setup screen when completing the production order.
I have tried without any luck...can someone please help me with this...
thank you
Kind regards
IanHi Ashis
I am aware of the function of maintaining batches, but this happens after the production process has been completed.
I need to populate the manufacturing date during the production process...
e.g. Production has been completed, the user opens a receipt from production and selects the production order, when adding the receipt from production the batch setup screen appears and the user can complete the batch details for the item manufactured, on this screen they want the manufacturing date to be populated automatically from the Production order due date...
I will try to use UDF's to see if it works...
Thank you -
Add-on 9000034 failed with exception; in blocking expire date batch in GR
Hi all ,
I try to set mandotory in expire date field in batch setup of good receipt. My code is like this
If (pVal.FormTypeEx = "41") Then
oForm = SBO_Application.Forms.Item(FormUID)
If (pVal.Before_Action = True) Then
Else
If pVal.ItemUID = "3" Then
mat = oForm.Items.Item("3").Specific
currow = pVal.Row
currCol = pVal.ColUID
If (pVal.ColUID = "10" And pVal.EventType = SAPbouiCOM.BoEventTypes.et_KEY_DOWN And pVal.CharPressed = 9) Or (pVal.ItemUID = "1" And pVal.EventType = SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED) Then
Try
Dim expdate As SAPbouiCOM.EditText
expdate = mat.Columns.Item(10).Cells.Item(currow).Specific
tgl = expdate.Value
Try
If expdate = "" Then
SBO_Application.MessageBox("Expired Date empty is not allowed")
End If
Exit Sub
Catch ex As Exception
Debug.Print(ex.Message)
Debug.Print(ex.ToString)
End Try
Catch ex As Exception
Debug.Print(ex.Message)
Debug.Print(ex.ToString)
End Try
End If
End If
End If
Else
If pVal.ItemUID = "41" And pVal.EventType = SAPbouiCOM.BoEventTypes.et_FORM_CLOSE Then
Exit Sub
End If
End If
When i try to close the batch setup and return to Good receipt form there is an error message
Add-on 9000034 failed with exception; Event Type : 17
Does any one know what the error message means ?
Does I miss something ?
Thanks in advance
Regards
Jia ShunHello,
for sorting batch codes by GR time sort from high to low after finding the codes from the date(s) you want (since the batch codes are created in numeric order the lower number will be the older batch codes)
perhaps I did not understand... -
Formatted search to update Batch attribute to match row project code
We have extented project codes to the batch level by creading a UDF OIBT.U_ProjectCode.
Is it possible to create a formatted search in the "Batch Setup " window to update this UDF with the project code from the corresponding row of the purchase order? Keep in mind not all rows on the purchase order may be tracked by batches.Hi,
Formatted search can only get value from database or current form. There is no access to other open forms.
Thanks,
Gordon -
Help creating batch action, save as tiff
I'm not *getting* it, and have been trying for a couple hours. Please, what am I missing???
Steps I've done;
Created a set called rit sq color balance
Created an action called color balance
Created an action called save and close, Saving as TIFF, Close
Should I not be able to run this sequence of adjusting the color, saving into the destination file as a tiff?
Each action works separately, but not together.You need to add (just drag it like you might a layer) the save step of save and close action into the color balance action, making that action a two-step action (color balance, then save). Then your batch setup will run.
If you check the "override action save as" (which you've done), you should see the warning below. Since there are no save steps in your color balance action (right now they reside in the save and close action), no files are saved. If you don't see this warning, you might consider resetting all the warning dialogues in the general areas of the prefs.
This would all be less confusing if you actions weren't named the steps they call... -
Auto Batch Creation Unique Fields
Hi All,
I have created 2 UDFu2019s in Marketing Documents ie Attribute1 (32Char) and Attribute2 (32Char). I have made a PurchaseOrder of 6 row Items and entered values to the above UDFu2019s. Now I copy that PO to GoodsReceiptPO and all the data along with the UDF values get copied to GRPO.
In my 6 rows I have same item eg ABC repeated in 3 different random rows. This item is a Batch Management on every Transaction item. When I try to add the GRPO, a Batch setup Screen pops up, Onthis Screen on the upper matrix ie Rows from Documents Matrix you will find the 3 rows of the same Items. When you Click on Automatic Creation button, an Automatic Batch Creation Screen Opens. On this Screen you have 2 fields ie BatchAttribute1 and BatchAttribute2.
What I want is how do I pass the udf values of GRPO ie Attribute1 and Attribute2 value on this Automatic Batch Creation Screen. I am trying it to do with SDK but I cant get the reference of which ROWs Automatic Screen is Opened as all the 3 item are ABC and they are on different different rows in GRPO (say on row1 and row3 and row6) and all these rows have different different values in the UDFs. I need to put the respective values from GRPO to the Automatic Batch Creation Screen BatchAttribute1 and BatchAttribute2 fields.
I hope I am being able to explain you the entire scenario clear to you.
Which is the unique key which is hidden on the Automatic Batch Creation Screen which sap knows and we are unaware. For that reason I explained you the entire scenario. My question was just that sap should let me know which is that field in SAP that is storing and passing the DocNo and Line No of GRPO to the AUTO BATCH Creation Screen. This fields are not visible to us, so how do I get the reference of this field on Auto Batch Creation Field or is there any other field by which sap recognizes during the time of Auto batch Creation. Would really appreciate you kind support for the same.
Regards,
MurtazaDear Xiaodan AN,
Thanks for your suggestion, I tied it but doesnu2019t seem to work. I am on form no 65053 which is the Auto Batch Creation Screen and I need to copy the GRPO Attribute UDF into AutoBatchCreate Attribute Field as per my scenario given above.
Here is my code of Item Event,
If pVal.FormType = "65053" and pVal.EventType = SAPbouiCOM.BoEventTypes.et_CLICK And pVal.ItemUID = "37" And pVal.BeforeAction = True Then
CopyAttribute(pVal, BubbleEvent)
End If
Public Sub CopyAttribute(ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean)
Dim frmAutoBatchNo As SAPbouiCOM.Form
frmAutoBatchNo = My_Application.Forms.GetForm("65053", 1)
Dim rowno As String
rowno = pVal.Row
End Sub
As per your suggestion I tried to get the row of item event but for all the 3 items I am getting the same value of rowno = -1
Can you futher explain me with an code
Kind Regards,
Murtaza -
Batch program to restrict PERNRS for read access to an infotype
Hi,
Is there any standard program that can be used to restrict a list of PERNRS for read access to a particular infotype for a certain amount of time?
The requirement is to restrict IDs(except batch ID) to change/create any time data in IT 2001/2002 while doing infotype load as well as postload hour balancing activities.
We dont want to lock out the PERNR or USERID for mantaining any other infotype data at the same time.
Appreciate all your suggestions!
-SujitHi ,
Actually it was nice Question , the answer was very straight .
1. please copy the profile role of the HR PERSONAL DATA which will have full authorise for all infotype's , in that give active only to 'Display' for infotype 2001/2002 . and you can tell to basis which ever infotype want to be the similar action . so that your problem will be solved.
2.SAP basis person knows how to give only 'Display' active , and make ( Create , Delete ) to inactive.
3.So ,finally the latest role should be assigned to group of PERNRS ,Even this is also basis work . he can group all the PERNRS or by personal area or by personnal sub area or by employee group or by employee sub group .
Girish -
Row - Invalid index [66000-31] in batch detail
Hi,
I try to block in inventory--> item management --> batch --> batch detail expiry date which if the expiry date is inputted has already expired.
My Code is like this
Private Sub SBO_Application_ItemEvent(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean) Handles SBO_Application.ItemEvent
' Form Batch Setup in good receipt
Dim mat As SAPbouiCOM.Matrix
Dim currow As String
Dim currcol As String
If (pVal.FormTypeEx = "65053") And pVal.EventType <> SAPbouiCOM.BoEventTypes.et_FORM_UNLOAD Then
oForm = SBO_Application.Forms.Item(FormUID)
If pVal.Before_Action = True Then
If pVal.ItemUID = "37" And pVal.EventType = SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED Then
' SBO_Application.MessageBox("Test")
Dim today As String
Try
Dim expdate As SAPbouiCOM.EditText
mat = oForm.Items.Item("48").Specific
currow = pVal.Row.ToString
expdate = mat.Columns.Item("7").Cells().Item(currow).Specific
expdate = mat.Columns.Item("7").Cells.Item(mat.GetCellFocus).Specific
expdate = mat.Columns.Item("7").ValidValues
Dim tgl As String = expdate.Value
today = Format(Date.Now(), "yyyyMMdd")
If tgl < today Then
SBO_Application.MessageBox("Back Date is Not Allowed")
End If
Catch ex As Exception
Debug.Print(ex.Message)
Debug.Print(ex.ToString)
End Try
End If
Else
If pVal.ItemUID = "37" And pVal.EventType = SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED Then
End If
End If
End If
End Sub
The expiry date field in batch detail sap B1 actually refer to column. When i try to look for the system information for this field the information is like this:
[Form = 65053 Item = 48 Pane = 0 Column = 7 Row = 1 Variable = 1 OBTN,Expdate]
I try to debug but the error message is "Row - Invalid index [66000-31]"
I try to debug the code above and try to watch the variable currrow. The currow position is -1.
Does anyone can help me ?
Thanks in advance
Regards
KKhi,
you may check the ff threads
Row - Invalid index
index
Find the warehouse in Cell of system matrix
regards,
Fidel
Maybe you are looking for
-
I can't say how dispppointed I am with iOS 7. The UI is so obviously flawed in design, I just can't believed it went through with any one at Apple having the common sense of stopping this. There are ensledd issues : - The sliders that now answer to a
-
How to copy a structure from one SAP system to other SAP system in ABAP
Hi All, We have a requriement where need to copy an strcture of 250 feilds from on SAP system to other SAP system , do any one know how to do it . Regards Channu
-
OIM - Users provisioned with different resource form versions
Hi !! we are having some problems with different resource form versions and maybe you can help us. We have two different versions of one resource form. One of them has 2 extra fields. Some users were provisioned with that resource with the previous f
-
The Dimension for a video podcast has changed and will not load into Ipod
I usually subscribe to a specific vid podcast but lately i have noticed that my ipod will not sync the new vid podcasts. it's very frustrating! i have had a closer look and realised that the vids that don't sync into my iPod have a larger dimension 8
-
Erratic & Weird iPhone 5s Behavior
I've experienced a truly weird episode of frozen screen, ghost typing, random app opening and picture taking on newly set up (used) 5s. Had to force reset several times to stop the behavior. It did all these things in very rapid succession while I wa