IDS4210 event filters fail following update
Upgraded an IDS4210 yesterday from 414s186. Used patch 414h, service pack 415s189, and signature update 415s197.
Following updates, it appears some event filters are being ignored... particularly the event filter for sig 1107 (rfc1918 private addresses).
Any ideas on fix?
Opened TAC case 602341295 on this event...
Similar Messages
-
Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support -
Installation Failure: Windows failed to install the following update with error 0x800F0922
Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil -
I tried to update my IPAD to IOS6 and it failed following this recover mode will not wortk either. I have reset multiple times and tried recovery again only to get the same error stating that recovery failed. The error states unknown recovery error. My system OS is up to date with OS X 10.7.5. Itunes is up to date with 10.7 (21).
Try:
- Powering off and then back on your router.
- The Additional Information paragraph of
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem -
I patched 2012 to the SP1 level and now I'm getting these warnings on many servers.
It seems to be considering these items as removable media?
DPM 2012, SP1, version 4.1.3313.0
Failed to update permissions used for end-user recovery on skutter.pmuk.net. Permissions update failed for the following reason: (ID 3123)
Affected area: skutter.pmuk.net
Occurred since: 11/01/2013 09:04:43
Description: Failed to update permissions used for end-user recovery on skutter.pmuk.net. Permissions update failed for the following reason: (ID 3123)
DPM is unable to enumerate contents in 2aad3f75a7e54a0f91b640d7f158f00a , 5702fef3756e4ca8af0554013951f32d , 78f9e6070fbd43aeb328700a88a3c926 , aquaria.pmuk.net_MTATempStore$ , ariel.pmuk.net_MTATempStore$ , atlantis.pmuk.net_downloads , atlantis.pmuk.net_MTATempStore$
, atlantis.pmuk.net_print$ , capricorn.pmuk.net_MTATempStore$ , CCM.pmuk.net_IvrDirectory , CCM.pmuk.net_MTATempStore$ , CHIRON.pmuk.net_MTATempStore$ , cpeserv-i03.pmuk.net_IMAGING , defiant.pmuk.net_idsc , defiant.pmuk.net_MTATempStore$ ,firebird.pmuk.net_Accts_serve
, firebird.pmuk.net_case , firebird.pmuk.net_Control ,firebird.pmuk.net_Fuel Cell , firebird.pmuk.net_HADCAD , firebird.pmuk.net_haddesign , firebird.pmuk.net_hadendurancelab , firebird.pmuk.net_HADEngCad , firebird.pmuk.net_HADPCLGainspeed ,firebird.pmuk.net_HADPCLProjects
,firebird.pmuk.net_HADPCLQuality , firebird.pmuk.net_HADPCLStandards , firebird.pmuk.net_hrXerox , firebird.pmuk.net_hs , firebird.pmuk.net_ITXerox , firebird.pmuk.net_JunHigashimura , firebird.pmuk.net_MTATempStore$ ,firebird.pmuk.net_office ,firebird.pmuk.net_OMPM
, firebird.pmuk.net_Outplacement ,firebird.pmuk.net_personal , firebird.pmuk.net_PJSESCANNER ,firebird.pmuk.net_pmuk ,firebird.pmuk.net_pwa ,firebird.pmuk.net_pwa2 , firebird.pmuk.net_scanfret ,firebird.pmuk.net_Siebel8 ,firebird.pmuk.net_Spares
,firebird.pmuk.net_test ,firebird.pmuk.net_TVDC ,firebird.pmuk.net_xeroxcpe$ ,firebird.pmuk.net_xeroxrd$ , HALLEY.pmuk.net_MTATempStore$ ,legion.pmuk.net_dfs ,legion.pmuk.net_MTATempStore$ , legion.pmuk.net_NETLOGON ,legion.pmuk.net_SYSVOL
, nemesis.pmuk.net_KEvin ,nemesis.pmuk.net_MTATempStore$ , PLEIDES.pmuk.net_Archive , PLEIDES.pmuk.net_DGHOME , PLEIDES.pmuk.net_MTATempStore$ ,PLEIDES.pmuk.net_print$ , roosevelt.pmuk.net_ARCserve$ ,roosevelt.pmuk.net_CHEYALERT$ , roosevelt.pmuk.net_HADQCEOLP
,roosevelt.pmuk.net_home3 , roosevelt.pmuk.net_MTATempStore$ ,roosevelt.pmuk.net_smssource , roosevelt.pmuk.net_WindowsEasyTransfer ,roosevelt.pmuk.net_XeroxScan , sagittarius.pmuk.net_MTATempStore$ ,sagittarius.pmuk.net_print$ , sakura.pmuk.net_MTATempStore$
,scorpia.pmuk.net_MTATempStore$ ,scorpion.pmuk.net_chandleram, scorpion.pmuk.net_Control ,scorpion.pmuk.net_CPE ,scorpion.pmuk.net_Digital ,scorpion.pmuk.net_Electrical , scorpion.pmuk.net_MTATempStore$ , scorpion.pmuk.net_NASUtils ,scorpion.pmuk.net_Personal
,scorpion.pmuk.net_QA ,scorpion.pmuk.net_QC , scorpion.pmuk.net_Technical , silverberg.pmuk.net_dfs ,silverberg.pmuk.net_MTATempStore$ ,silverberg.pmuk.net_NETLOGON , silverberg.pmuk.net_SYSVOL ,skutter.pmuk.net_dfs , skutter.pmuk.net_MTATempStore$ ,skutter.pmuk.net_NETLOGON
,skutter.pmuk.net_sharepoint-saver ,skutter.pmuk.net_SYSVOL , tempest.pmuk.net_MTATempStore$ , tempest.pmuk.net_Quarantine ,tempest.pmuk.net_SiteBackups , tempest.pmuk.net_tsdp , titania.pmuk.net_MTATempStore$ , valiant.pmuk.net_domino , valiant.pmuk.net_hadprod
, valiant.pmuk.net_MTATempStore$ ,valiant.pmuk.net_oracle ,vindaloo.pmuk.net_MTATempStore$ , virgon.pmuk.net_faxclient ,virgon.pmuk.net_FxsSrvCp$ ,virgon.pmuk.net_MTATempStore$ , xavier.pmuk.net_Address ,xavier.pmuk.net_downloads ,xavier.pmuk.net_drivers ,
xavier.pmuk.net_Exchange IS Starter ,xavier.pmuk.net_ExchangeOAB , xavier.pmuk.net_ExchangeUM , xavier.pmuk.net_MTATempStore$ , xavier.pmuk.net_out-arch , xavier.pmuk.net_Resources$ on the protected computer tower.pmuk.net. Recycle Bin, System Volume Information
folder, non-NTFS volumes, DFS links, CDs, Quorum Disk (for cluster) and other removable media cannot be protected. (ID 38 Details: )
Any Ideas? backups are OK, recovery points/sync's etc.
Mark.I am using DPM 2012 R2, what finally worked to me to resolve my problem with EUR was to:
In DPM I disabled EUR
In Computer Management delete all DPM Shares (\\?\c:\Program Files\...)
Using ADSI edit go to CN=MS-ShareMapConfiguration,CN=System,DC=X,DC=Y (Replace X & Y for your domain)
Delete all of the mappings within the container
In DPM enable EUR
In DPM on a protection group I created a new recovery point and selected “Only synchronize (available only for file data)”
Related article on ADSI Edit and DPM -
http://social.technet.microsoft.com/Forums/en-US/e0258384-8422-408c-8839-2580d616a9ec/edsi-edit-related-to-data-protection-manager?forum=dpmfilebackup
I hope this helps
JD Young -
Windows failed to install the following update with error 0x80070005
Hi,
We are using Win Server 2008 R2 std. Server and Win 7 Professional X64 clients. During the second batch of update we got an Error while updating on one client machine and the system restoring back automatically However other clients are updating and working
fine. Then i tried to install the updates one by one manually then successfully installed all the updates except one ie. KB2862330. It keeps failing then i found an article suggest to check the update with Admin Previlage, disable Antivirus and Scan the
computer for Malware (Using MS Security Scanner and Malwarebytes). I tried both but never works. After that i got 2 batch of updates, everything is updating and trying to update this (KB2862330) and failing till date. What is the issue and why its not updating
on one machine?
Installation Failure: Windows failed to install the following update with error 0x80070005: Security Update for Windows 7 for x64-based Systems (KB2862330).
KB Article Followed : http://support.microsoft.com/kb/968003/en-usOkay, good. The SURT shows no errors.
So now we can blame the problem exclusively on the update itself.
And yes... there are still known, ongoing issues with KB2862330.
Truly, my suggestion is to just not install it at all. Unless you've identified a known risk via a USB vector on particular systems where the vulnerability would be considered a critical risk, I'd say that the risk caused by the vulnerability is significantly
less than the risk of additional headache caused by the update itself. I have still not deployed MS13-081 to any of my systems, and frankly, I don't plan to.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Safari fails to update followed links dynamically
I mentioned this a while ago and am surprised that Apple continues to produce perhaps the only browser which fails to update followed links dynamically.
The bug is best illustrated with an example. Hit this URL:
http://www.google.co.uk/search?num=100&newwindow=1&q=apple
and then try one or two links on the resulting Google page.
All other browsers I have tried update the followed links on the Google page dynamically without it being reloaded but Safari does not.
I do not use tabs and am not sure if those using tabs will be aware of the bug.
This is the only thing which stops me using Safari as my default browser.
I would be grateful if others can confirm that they also get this bug.Many thanks bdash.
I am surprised it was not included with this week's Safari 3.2.1.
I have just tried iCab and the result is consistent with it being a WebKit issue.
The original bug report that you linked to compared Safari with Firefox but, from memory, with the exception of WebKit virtually all browsers produced from at least 5 series onwards have dynamically updated followed links.
I will put a link to this thread on
http://discussions.apple.com/thread.jspa?threadID=1702301
and any other pages about this issue which I come across.
Thanks again for your timely helpful reply - I will mark this as 'answered'. -
COM+ Event System failed to fire the StartShell and Logon method after installation of PM 1.43
Hi Guys,
After installation of Power Manager 1.43, the following errors were immediate shown at event viewer: COM+ Event System failed to fire the StartShell and Logon method on subscription {F6FE5592-FCBC-44AD-A836-D37F5085ED5B}-{00000000-0000-0000-0000-000000000000}-{00000000-0000-0000-0000-000000000000}. The subscriber returned HRESULT 80004001.
Please advice if this is a known issue? Thanks!Hello,
this is a known problem. See this thread
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español -
Failed to update comments table structure of ( AppSet - AppName)
Happy New Year Experts,
Version: BPC Netweaver SP6
I am having an issue with adding a dimension to an application. I am recieving the following error message:
Failed to update comments table structure of ( AppSet - AppName)
Here is the order of events that led me to this issue:
1. I created a "U" dimension
2. I created all associated properties for this dimension
3. I added the dimension to the application
4. I deleted the dimension
5. I re-created the dimension with the exact same name (this worked just fine)
6. When I add the dimension back to the application, I recieve that error message
I am not certain why this is happening, I can add a dim with a different name just fine, but I need\want to use the name that it is rejecting.
Any assistance that anyone can provide would be greatly appreciated.
Thank you,
Mark J. GlowczewskiI figured out that the issue with this error messaged related to the dimension name being a reserved word in BPC Netweaver.
The Dim name I was using was "Part".
Once I changed the dimension name, I was able to to successfully add the dim to my applicaiton.
Thank you,
Mark J. Glowczewski -
Event ID 7031 followed by 7032 The Microsoft Exchange Transport service terminated unexpectedly.
Hello
Have a strange problem that reoccurs every day. The following are recorded in the log.
7031
The Microsoft Exchange Transport service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.7032The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Microsoft Exchange Transport service, but this action failed with the following error:
An instance of the service is already running.Any suggestions are welcome./Deland
/AndreasHere are the result from the level 5 logging. I Havent disabled the TransportAgent yet.
Log Name: Application
Source: MSExchangeTransport
Date: 2013-07-19 10:13:25
Event ID: 12025
Task Category: TransportService
Level: Warning
Keywords: Classic
User: N/A
Computer: XXXX
Description:
Transport service is disconnecting performance counters with process lifetime from their old process.
Followed by 32 events of 12028
Log Name: Application
Source: MSExchangeTransport
Date: 2013-07-19 10:13:25
Event ID: 12028
Task Category: TransportService
Level: Warning
Keywords: Classic
User: N/A
Computer: XXXX
Description:
The process with process ID 1100 is holding the performance counter configuration cache total requests Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062 from instance transportrules(B1D082BB) RefCount=0 SpinLock=0 Offset=3936
and category MSExchangeTransport Configuration Cache while running processes are: Processes running are:
6300 UMWorkerProcess
5312 Microsoft.Exchange.ServiceHost
1568 Microsoft.Exchange.Diagnostics.Service
2212 WMSvc
776 svchost
1760 MSExchangeHMHost
9808 MSExchangeDelivery
376 explorer
2252 Microsoft.Exchange.Directory.TopologyService
9436 rundll32
1752 nscp
2932 noderunner
6076 MSExchangeSubmission
7056 scanningprocess
1736 PccNtMon
1340 fms
4688 MSExchangeTransport
1732 Ntrtscan
2716 MSExchangeMailboxAssistants
548 winlogon
9016 TmProxy
348 svchost
2904 SMSvcHost
1524 inetinfo
8376 TMBMSRV
5264 MSExchangeThrottling
12552 powershell
4080 w3wp
1124 svchost
7688 svchost
12744 w3wp
332 smss
1316 svchost
13188 mmc
5772 ForefrontActiveDirectoryConnector
3080 HostedAgent
11364 conhost
3268 w3wp
1060 svchost
2924 noderunner
904 dwm
3856 w3wp
504 wininit
7200 Microsoft.Exchange.Store.Worker
1668 SMSvcHost
4832 MSExchangeFrontendTransport
2072 sftracing
4932 MSExchangeMailboxReplication
7192 Microsoft.Exchange.Store.Worker
6992 Microsoft.Exchange.UM.CallRouter
9640 w3wp
9204 svchost
3244 svcGenericHost
1200 Microsoft.Exchange.Store.Service
876 svchost
10724 rundll32
3040 conhost
2480 w3wp
5992 MSExchangeTransportLogSearch
596 services
12508 w3wp
2636 MSExchangeHMWorker
11892 taskhostex
4796 Microsoft.Exchange.Search.Service
3568 WmiPrvSE
12532 ServerManager
9564 msdtc
4352 Microsoft.Exchange.EdgeSyncSvc
2032 mqsvc
6560 scanningprocess
3404 TmListen
4384 updateservice
3004 scanningprocess
6744 umservice
1424 hostcontrollerservice
828 svchost
432 csrss
696 svchost
1284 spoolsv
8152 w3wp
3576 w3wp
1264 svchost
496 csrss
5928 Microsoft.Exchange.RpcClientAccess.Service
2972 noderunner
2380 conhost
604 lsass
6884 Microsoft.Exchange.Store.Worker
10056 WmiPrvSE
992 svchost
2764 noderunner
5324 msexchangerepl
4 System
3548 Microsoft.Exchange.AntispamUpdateSvc
2168 svchost
0 Idle
And 28 events on 106
Log Name: Application
Source: MSExchange Common
Date: 2013-07-19 10:13:29
Event ID: 106
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: XXXX
Description:
Performance counter updating error. Counter name is DataRow seeks total, category name is MSExchangeTransport Database. Optional code: 2. Exception: The exception thrown is : System.InvalidOperationException: Instance '_total' already exists with a lifetime
of Process. It cannot be recreated or reused until it has been removed or until the process using it has exited.
at System.Diagnostics.SharedPerformanceCounter.FindInstance(Int32 instanceNameHashCode, String instanceName, CategoryEntry* categoryPointer, InstanceEntry** returnInstancePointerReference, Boolean activateUnusedInstances, PerformanceCounterInstanceLifetime
lifetime, Boolean& foundFreeInstance)
at System.Diagnostics.SharedPerformanceCounter.GetCounter(String counterName, String instanceName, Boolean enableReuse, PerformanceCounterInstanceLifetime lifetime)
at System.Diagnostics.SharedPerformanceCounter..ctor(String catName, String counterName, String instanceName, PerformanceCounterInstanceLifetime lifetime)
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.get_RawValue()
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
Last worker process info : System.ArgumentException: Process with an Id of 14868 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Processes running while Performance counter failed to update:
6300 UMWorkerProcess
5312 Microsoft.Exchange.ServiceHost
1568 Microsoft.Exchange.Diagnostics.Service
2212 WMSvc
776 svchost
1760 MSExchangeHMHost
9808 MSExchangeDelivery
376 explorer
2252 Microsoft.Exchange.Directory.TopologyService
9436 rundll32
1752 nscp
2932 noderunner
10416 EdgeTransport
6076 MSExchangeSubmission
7056 scanningprocess
1736 PccNtMon
1340 fms
4688 MSExchangeTransport
1732 Ntrtscan
2716 MSExchangeMailboxAssistants
548 winlogon
9016 TmProxy
348 svchost
2904 SMSvcHost
1524 inetinfo
15116 conhost
8376 TMBMSRV
5264 MSExchangeThrottling
12552 powershell
4080 w3wp
1124 svchost
7688 svchost
12744 w3wp
332 smss
1316 svchost
13188 mmc
5772 ForefrontActiveDirectoryConnector
3080 HostedAgent
11364 conhost
3268 w3wp
1060 svchost
2924 noderunner
904 dwm
3856 w3wp
504 wininit
7200 Microsoft.Exchange.Store.Worker
1668 SMSvcHost
4832 MSExchangeFrontendTransport
2072 sftracing
4932 MSExchangeMailboxReplication
7192 Microsoft.Exchange.Store.Worker
6992 Microsoft.Exchange.UM.CallRouter
9640 w3wp
9204 svchost
3244 svcGenericHost
1200 Microsoft.Exchange.Store.Service
876 svchost
10724 rundll32
3040 conhost
2480 w3wp
5992 MSExchangeTransportLogSearch
596 services
12508 w3wp
2636 MSExchangeHMWorker
11892 taskhostex
4796 Microsoft.Exchange.Search.Service
3568 WmiPrvSE
12532 ServerManager
9564 msdtc
4352 Microsoft.Exchange.EdgeSyncSvc
2032 mqsvc
6560 scanningprocess
3404 TmListen
4384 updateservice
3004 scanningprocess
6744 umservice
1424 hostcontrollerservice
828 svchost
432 csrss
696 svchost
1284 spoolsv
8152 w3wp
3576 w3wp
1264 svchost
496 csrss
5928 Microsoft.Exchange.RpcClientAccess.Service
2972 noderunner
2380 conhost
604 lsass
6884 Microsoft.Exchange.Store.Worker
10056 WmiPrvSE
992 svchost
2764 noderunner
5324 msexchangerepl
4 System
3548 Microsoft.Exchange.AntispamUpdateSvc
2168 svchost
0 Idle
Performance Counters Layout information: A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=59 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : queue(B351294)
RefCount=0 SpinLock=0 Offset=48552, categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 8(ED0419E7) RefCount=0 SpinLock=0 Offset=44384,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 6(ED0419E9) RefCount=0 SpinLock=0 Offset=40216,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=4 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 3(ED0419EC) RefCount=0 SpinLock=0 Offset=36048,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=3 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 1(ED0419EE) RefCount=0 SpinLock=0 Offset=31880,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=18 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat(B874BB3) RefCount=0 SpinLock=0 Offset=27712,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : inqueue(56145953) RefCount=0 SpinLock=0 Offset=23544,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=17 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : smtpin(81392C98) RefCount=0 SpinLock=0 Offset=19376,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : mail(7C6FB7CC) RefCount=0 SpinLock=0 Offset=15208,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=68 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : other(ADC98A1) RefCount=0 SpinLock=0 Offset=11040,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 4832, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4832 StartupTime: 130183498009738545, currentInstance : _total(CFBEE918) RefCount=1 SpinLock=0 Offset=32,
categoryName: MSExchangeTransport Database
Log Name: Application
Source: MSExchange Common
Date: 2013-07-19 10:13:31
Event ID: 106
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: XXXX
Description:
Performance counter updating error. Counter name is Transaction Durable Callback Count/sec, category name is MSExchangeTransport Database. Optional code: 1. Exception: The exception thrown is : System.InvalidOperationException: Instance '_total' already exists
with a lifetime of Process. It cannot be recreated or reused until it has been removed or until the process using it has exited.
at System.Diagnostics.SharedPerformanceCounter.FindInstance(Int32 instanceNameHashCode, String instanceName, CategoryEntry* categoryPointer, InstanceEntry** returnInstancePointerReference, Boolean activateUnusedInstances, PerformanceCounterInstanceLifetime
lifetime, Boolean& foundFreeInstance)
at System.Diagnostics.SharedPerformanceCounter.GetCounter(String counterName, String instanceName, Boolean enableReuse, PerformanceCounterInstanceLifetime lifetime)
at System.Diagnostics.SharedPerformanceCounter..ctor(String catName, String counterName, String instanceName, PerformanceCounterInstanceLifetime lifetime)
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.IncrementBy(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.IncrementBy(Int64 incrementValue)
Last worker process info : System.ArgumentException: Process with an Id of 14868 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Processes running while Performance counter failed to update:
6300 UMWorkerProcess
5312 Microsoft.Exchange.ServiceHost
1568 Microsoft.Exchange.Diagnostics.Service
2212 WMSvc
776 svchost
1760 MSExchangeHMHost
9808 MSExchangeDelivery
376 explorer
2252 Microsoft.Exchange.Directory.TopologyService
9436 rundll32
1752 nscp
2932 noderunner
10416 EdgeTransport
6076 MSExchangeSubmission
7056 scanningprocess
1736 PccNtMon
1340 fms
4688 MSExchangeTransport
1732 Ntrtscan
2716 MSExchangeMailboxAssistants
548 winlogon
9016 TmProxy
348 svchost
2904 SMSvcHost
1524 inetinfo
15116 conhost
8376 TMBMSRV
5264 MSExchangeThrottling
12552 powershell
4080 w3wp
1124 svchost
7688 svchost
12744 w3wp
332 smss
1316 svchost
13188 mmc
5772 ForefrontActiveDirectoryConnector
3080 HostedAgent
11364 conhost
3268 w3wp
1060 svchost
2924 noderunner
904 dwm
3856 w3wp
504 wininit
7200 Microsoft.Exchange.Store.Worker
1668 SMSvcHost
4832 MSExchangeFrontendTransport
2072 sftracing
4932 MSExchangeMailboxReplication
7192 Microsoft.Exchange.Store.Worker
6992 Microsoft.Exchange.UM.CallRouter
9640 w3wp
9204 svchost
3244 svcGenericHost
1200 Microsoft.Exchange.Store.Service
876 svchost
10724 rundll32
3040 conhost
2480 w3wp
5992 MSExchangeTransportLogSearch
596 services
12508 w3wp
2636 MSExchangeHMWorker
11892 taskhostex
4796 Microsoft.Exchange.Search.Service
3568 WmiPrvSE
12532 ServerManager
9564 msdtc
4352 Microsoft.Exchange.EdgeSyncSvc
2032 mqsvc
6560 scanningprocess
3404 TmListen
4384 updateservice
3004 scanningprocess
6744 umservice
1424 hostcontrollerservice
828 svchost
432 csrss
696 svchost
1284 spoolsv
8152 w3wp
3576 w3wp
1264 svchost
496 csrss
5928 Microsoft.Exchange.RpcClientAccess.Service
2972 noderunner
2380 conhost
604 lsass
6884 Microsoft.Exchange.Store.Worker
10056 WmiPrvSE
992 svchost
2764 noderunner
5324 msexchangerepl
4 System
3548 Microsoft.Exchange.AntispamUpdateSvc
2168 svchost
0 Idle
Performance Counters Layout information: A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=59 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : queue(B351294)
RefCount=0 SpinLock=0 Offset=48552, categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 8(ED0419E7) RefCount=0 SpinLock=0 Offset=44384,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 6(ED0419E9) RefCount=0 SpinLock=0 Offset=40216,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=4 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 3(ED0419EC) RefCount=0 SpinLock=0 Offset=36048,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=3 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 1(ED0419EE) RefCount=0 SpinLock=0 Offset=31880,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=18 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat(B874BB3) RefCount=0 SpinLock=0 Offset=27712,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : inqueue(56145953) RefCount=0 SpinLock=0 Offset=23544,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=17 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : smtpin(81392C98) RefCount=0 SpinLock=0 Offset=19376,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 10416, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 10416 StartupTime: 130186952059962770, currentInstance : mail(7C6FB7CC) RefCount=1 SpinLock=0 Offset=15208,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 10416, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 10416 StartupTime: 130186952059962770, currentInstance : other(ADC98A1) RefCount=1 SpinLock=0 Offset=11040,
categoryName: MSExchangeTransport Database
A process is holding onto a transport performance counter. processId : 4832, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4832 StartupTime: 130183498009738545, currentInstance : _total(CFBEE918) RefCount=1 SpinLock=0 Offset=32,
categoryName: MSExchangeTransport Database
Then ESE Recovery starts on the Transport database.
/Andreas -
Master Data loading got failed: error "Update mode R is not supported by th
Hello Experts,
I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
"Update mode R is not supported by the extraction API"
Can anyone tell me what is that error for? how to resolve this issue?
Regards,
NiravHi
Update mode R error will come in the below case
You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
This time the load will fail with update mode R.
As repeat delta is not supported.
So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
example your fiorst delta failed with replication issue.
only replicating and repeaing will not solve the update mode R.
you will have to do both replication of the data source and re-int for the update mode R.
One more thing I would like to add is.
If the the delat which failed with error the first time(not update mode R), then
you have to do init with data transfer
if it failed without picking any records,
then do init without data transfer.
Hope this helps
Regards
Shilpa
Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM -
iTunes on my Windows Vista has failed to update over several weeks. Audio will not play out. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting. Any clues??
Hey petanque1,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M. -
Hi Friends,
OS = Windows XP 3
Database = Oracle 11g R2 32 bit
Processor= intel p4 2.86 Ghz
Ram = 2 gb
Virtual memory = 4gb
I was able to install the oracle 11g successfully, but during installation at the time of database creation I got the following error many times and I ignored it many times... but at 55% finally My installation was hanged nothing was happening after it.....
ORA-28056: Writing audit records to Windows Event Log failed Error and at 55% my Installation got hung,,,, I end the installation and tried to create the database afterward by DBCA but same thing happened....
Please some one help me out, as i need to install on the same machine .....
Thanks and RegardsAAP wrote:
Thanks Now I am able to Create a database , but with one error,
When I created a database using DBCA, at the last stage I got this error,
Database Configuration Assistant : Warning
Enterprise Manager Configuration Failed due to the Following error Listener is not up or database service is not registered with it. Start the listener & Registered database service & run EM Configuration Assistant again....
But when I checked the listener was up.....
Now what was the problem, I am able to connect and work through sqlplus,
But I didnt got the link of EM and when try to create a new connection in sql developer it is giving error ( Status : failure - Test Failed the Network Adapter could not establish the connection )
Thanks & Regards
Creation of the dbcontrol requires a connection via the listener. When configuring the dbcontrol as part of database creation, it appears that the dbcontrol creation step runs before the dynamic registration of the databsase with the listener is complete. Now that the database itself is completed and enough time (really, just a minute or two) has passed to allow the instance to register, use dbca or emca to create the dbcontrol.
Are you able to get a sqlplus connection via the listener (sqlplus scott/tiger@orcl)? That needs to be the first order of business. -
Satellite P855-108 - PC health Monitor fails to update - Windows 8.1 update
Hello,
today updated to win 8.1 from a one year old windows 8, everything went fine
Then I followed Toshiba recommendations for updating the tools but despite doing exactly as explained the flash cards(and the functions buttons) are not functioning, they worked perfectly in win 8!
_The only utility that fails to update is PC health monitor,_ the version installed is 1.9.04.6402 and the one from support site for win 8.1 is 1.9.09.6400, when trying to install it fails with error message "not support"
When trying to open the installed health monitor there is also an error message "can`t get the bios type".
This is strange and every other utility recognizes the latest bios version 6.70 an the laptop`s details an serial
I tried all I could think about, installed flash card support tool from win 8, enabling and disabling in the bios, even installed VAP for win 8 but no change
Any help would be highly appreciated
Latest system driver and other tools are installed
Thanks in advanceSorry for taking space on the forum,
_In case anyone is facing the same problem I managed to find a solution by my self,_
*it was caused by the old version of PC health monitor,*
uninstalled, updated to latest version
Now Function key utility and everything works as supposed, _the latest Health monitor also works fine_ -
Failed to updated my MacBook Pro
I just purchased a new 15 inches Macbook Pro 320GB with 7200rpm 4GB memory last Tuesday which I ordered online.
I just discovered I have sixteen items to update such as security Update 2010 – 001, Java for Mac OS 10.6 Update 1, iMove update, iTunes update…etc. but they all failed to updated.
My Internet is working as it was downloading for twenty-three minutes but this what comes up
“Some of the selected updates couldn’t be saved
The update could not be expanded and verified. It may have been corrupted or tempered with during downloading. The Update will be downloaded and checked again the next time that Software update runs”
When I click “OK” button – this comes up “An error occurred during download”
I had done this three times even with one to install a time, it still failed or any of update software didn’t updated at all. I am keeping trying...
Any advise on this please.Thanks for moved my question to correct forum.
My new Macbook Pro is as follows:
Model Identifier: MacBookPro5,3
Version 10.6.0 (216)
Processor Name: Intel Core 2 Duo
Processor Speed: 2.66 GHz
Memory: 4 GB
just discovered I have sixteen items to update such as security Update 2010 – 001, Java for Mac OS 10.6 Update 1, iMove update, iTunes update…etc. but they all failed to updated.
My Internet is working as it was downloading for twenty-three minutes but this what comes up
“Some of the selected updates couldn’t be saved
The update could not be expanded and verified. It may have been corrupted or tempered with during downloading. The Update will be downloaded and checked again the next time that Software update runs”
When I click “OK” button – this comes up “An error occurred during download”
I had done this three times even with one to install a time, it still failed or any of update software didn’t updated at all. I am keeping trying...
Maybe you are looking for
-
I have a ipod nano(1st Gen.). I bought a itunes card, and have $15.34 as a balance. It won't let me purchase songs and deduct the money from my account balance. I get a message saying "we can not download [title of song] to this device") why? I've do
-
Where is the Blu-ray processed movie?
Howdy. So I bought a 6X Samsung USB external Blu-ray drive (the MCE Technologies 12X internal wouldn't work, so I sent it back). I'm rendering out a 2-hour long 1080p movie right now via the Share:Blu-ray option in Final Cut Pro X. It's been 7 hours
-
Modified jsff files are not recompiled
Hi all, We have several jspx ADF pages that include a region which displays a taskflow. The default view of the taskflow is a jsff file. When we change the jspx file itself, weblogic picks up the modified file time and recompiles it, showing the upda
-
Hi all My daughter bought a 12" 600mhz ibook on ebay, and I would like to purchase and install for her a combo drive for Christmas. I feel I have missed a few good opportunities on ebay since I am not sure which brand to buy, nor do I know what the d
-
When is it appropriate to use "spanning-tree bpdufilter enable"
What exactly does enabling bpdu filter do? I see some examples where bpdu filtering is enabled on access ports? Is this correct or are there dangers in this approach?