IDSM-2 not updating 6500 ACL
I have a 6500 IDSM-2 blade which is configured to create a blocking ACL in the 6500 for a few signatures. It's been working for a couple of years but recently stopped. The IDSM detects attacks and thinks it's updating the 6500, but the 6500's ACLs are not updated and the 6500 shows no login from the IDS. I am not seeing any error msgs anywhere. When I manually insert an IP to block via the IDM client, it shows up in the sensor with no error, but the 6500 is not updated. This seems to have started about the time I installed S324 (3/26/08). The sensor is now S329. I have rebooted the IDS with no effect in behavior.
Can someone suggest what I might look at to narrow down the problem? Thanks.
Are you running version 6.0(4)?
There is a known problem during upgrade from earlier version to 6.0(4). The passwords for blocking on routers, firewalls, and switches, as well as the passwords for auto updates were not converted properly.
CSCso31217 encrypted passwords not decrypted after upgrade
For users who already loaded 6.0(4), to fix the porblem the user needs to re-enter these passwords.
For users still on older versions and wanting to upgrade to 6.0(4), they should instead upgrade to 6.0(4a). The 6.0(4a) will properly convert the passwords.
NOTE: Users already at 6.0(4) can Not upgrade to 6.0(4a), and will need to re-enter the passwords on the sensors.
This problem has only been seen with the 6.0(4) upgrade package when upgrading from older 5.1 and 6.0 versions.
NOTE: The System Images and Recovery Images for 6.0(4) are all fine.
So if you are running a 6.0(4) version, then that is likely where your problem originated rather than a signature update.
IF you are not running version 6.0(4), then there is a small possibility you might have discovered a new bug that Cisco is unaware of.
Similar Messages
-
Illustrator 64 will not update to 16.0.2
I have Adobe Master Collection CS6 installed and updated many of the programs today. Among them Illustrator 32 updated fine to 16.0.2, but Illustrator 64 failed to update and even deleted the EXE file.
I recovered the EXE file from a backup file, and it (16.0.1) seems to run fine, but will not update to 16.0.2 either through the update program or manually.
I looked at the install file, but nothing was obvious to me. It is copied below for more experienced eyes.
Thanks in advance.
AJB
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Visit http://www.adobe.com/go/loganalyzer/ for more information
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
START - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
RIBS version: 6.2.10.0
Win OS version: 6.1.1.0 64 bit Type: 1
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
deploymentFile option not given
CHECK : Another Native OS installer already running
Create Required Folders
Assuming install mode
Looking up install source path
Sync Media DB ...
::START TIMER:: [Sync Media DB]
Pre check media db sync
End of Pre check media db sync. Exit code: 0
:: END TIMER :: [Sync Media DB] took 18.451 milliseconds (0.018451 seconds)
Ready to initialize session to start with ...
::START TIMER:: [CreatePayloadSession]
-------------------- BEGIN - Updating Media Sources - BEGIN --------------------
Updated source path: C:\Users\Arnold\AppData\Local\Temp\Adobe\AAMUpdater\AdobeIllustrator16-mul_x64\16.3\Setup
Updating media info for: {F861E540-8C1D-4052-9877-61CB41C02B7A}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, Media Name:
Path: C:\Users\Arnold\AppData\Local\Temp\Adobe\AAMUpdater\AdobeIllustrator16-mul_x64\16.3\Setup \payloads\AdobeIllustrator16-mul_x64-170912172642\Install.db
-------------------- END - Updating Media Sources - END --------------------
Supported RIBS version range: [0.0.66.0,6.2.10.0]
----------------- CreatePayloadSession: machine is x64 ---------------
[ 8624] Wed Oct 03 09:02:47 2012 INFO
Setting ignore refcount for '{A7D9641D-E152-4026-B2F3-745A67DDBC64} Adobe Illustrator CS6 Core (64 Bit)_16.0.1_AdobeIllustrator16-mul_x64 16.0.1.0' getting upgraded by '{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0'
______ Verify Dependency Subscribers ______
BEGIN Operation order for all session payloads: mediaGroup (requires,satisfies)
{A7D9641D-E152-4026-B2F3-745A67DDBC64} Adobe Illustrator CS6 Core (64 Bit)_16.0.1_AdobeIllustrator16-mul_x64 16.0.1.0: 0 (0,0)
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: 0 (0,0)
END Operation order for all session payloads: mediaGroup (requires,satisfies)
Patch {A7D9641D-E152-4026-B2F3-745A67DDBC64} Adobe Illustrator CS6 Core (64 Bit)_16.0.1_AdobeIllustrator16-mul_x64 16.0.1.0 can be applied to product {9D3BB9DA-1F59-4DCF-A0BB-691FA8EA2582} Adobe Illustrator CS6 Core (64 Bit) 16.0.0.0
Patch {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 can be applied to product {9D3BB9DA-1F59-4DCF-A0BB-691FA8EA2582} Adobe Illustrator CS6 Core (64 Bit) 16.0.0.0
Overwrite property "extensionsOnly" to: 1
Overwrite property "mode" to: silent
Overwrite property "patchesOnly" to: 1
Overwrite property "workflow" to: updater
Found payload actions:
Deciding what installer mode to use...
[ 8624] Wed Oct 03 09:02:48 2012 INFO
BEGIN Setting requested payload actions
Value returned on lookup of payload: {A7D9641D-E152-4026-B2F3-745A67DDBC64} Adobe Illustrator CS6 Core (64 Bit)_16.0.1_AdobeIllustrator16-mul_x64 16.0.1.0 is: true
Action string for {A7D9641D-E152-4026-B2F3-745A67DDBC64} Adobe Illustrator CS6 Core (64 Bit)_16.0.1_AdobeIllustrator16-mul_x64 16.0.1.0 is install
Value returned on lookup of payload: {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 is: false
Action string for {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 is install
END Setting requested payload actions
Collected advanced path check information for INSTALLDIR
INSTALLDIR is a well-formed path
INSTALLDIR is not the root path
INSTALLDIR is on a local volume
INSTALLDIR is on a writable volume
INSTALLDIR is not on a case sensitive volume
INSTALLDIR passed path basic path validation: C:\Program Files\Adobe
BEGIN InstallOperationsQueue Unordered operations
{A7D9641D-E152-4026-B2F3-745A67DDBC64} Adobe Illustrator CS6 Core (64 Bit)_16.0.1_AdobeIllustrator16-mul_x64 16.0.1.0: with operation remove
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Unordered operations
BEGIN InstallOperationsQueue Ordered operations
{A7D9641D-E152-4026-B2F3-745A67DDBC64} Adobe Illustrator CS6 Core (64 Bit)_16.0.1_AdobeIllustrator16-mul_x64 16.0.1.0: with operation remove
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Ordered operations
Payloads passed preflight validation.
Call PreSession Custom Hook
BEGIN InstallOperationsQueue Unordered operations
{A7D9641D-E152-4026-B2F3-745A67DDBC64} Adobe Illustrator CS6 Core (64 Bit)_16.0.1_AdobeIllustrator16-mul_x64 16.0.1.0: with operation remove
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Unordered operations
BEGIN InstallOperationsQueue Ordered operations
{A7D9641D-E152-4026-B2F3-745A67DDBC64} Adobe Illustrator CS6 Core (64 Bit)_16.0.1_AdobeIllustrator16-mul_x64 16.0.1.0: with operation remove
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Ordered operations
Calling the custom action code for pre-remove for payload {A7D9641D-E152-4026-B2F3-745A67DDBC64} Adobe Illustrator CS6 Core (64 Bit)_16.0.1_AdobeIllustrator16-mul_x64 16.0.1.0
::START TIMER:: [Payload Operation :{A7D9641D-E152-4026-B2F3-745A67DDBC64}]
[ 152] Wed Oct 03 09:02:48 2012 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Installer Operation: PayloadUninstaller
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Session {F861E540-8C1D-4052-9877-61CB41C02B7A} modify request for AdobeCode: {A7D9641D-E152-4026-B2F3-745A67DDBC64}
Effective AdobeCode for: {A7D9641D-E152-4026-B2F3-745A67DDBC64} is {A7D9641D-E152-4026-B2F3-745A67DDBC64}
Uninstalling payload
Payload {A7D9641D-E152-4026-B2F3-745A67DDBC64} Adobe Illustrator CS6 Core (64 Bit)_16.0.1_AdobeIllustrator16-mul_x64 16.0.1.0: Calling ARKEngine from path C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE6\resources
CustomizedPatch property not found in database
Beginning un-installation for payload at C:\Program Files (x86)\Common Files\Adobe\Installers\uninstall\{A7D9641D-E152-4026-B2F3-745A67DDBC64}.db
[ 152] Wed Oct 03 09:02:53 2012 INFO
Completing un-installation for payload at C:\Program Files (x86)\Common Files\Adobe\Installers\uninstall\{A7D9641D-E152-4026-B2F3-745A67DDBC64}.db
Physical payload uninstall result:0
[ 8624] Wed Oct 03 09:02:53 2012 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 0 =*=*=*=*=*=*=*=*=*=*=*=*=*
:: END TIMER :: [Payload Operation :{A7D9641D-E152-4026-B2F3-745A67DDBC64}] took 4601.12 milliseconds (4.60112 seconds) DTR = 4707.55 KBPS (4.59721 MBPS)
User specified overrideFile:
Successfully updated the csu inventory for {A7D9641D-E152-4026-B2F3-745A67DDBC64} Adobe Illustrator CS6 Core (64 Bit)_16.0.1_AdobeIllustrator16-mul_x64 16.0.1.0 return values 0:0
Calling the custom action code for post-remove for payload {A7D9641D-E152-4026-B2F3-745A67DDBC64} Adobe Illustrator CS6 Core (64 Bit)_16.0.1_AdobeIllustrator16-mul_x64 16.0.1.0
Calling the custom action code for pre-install for payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0
::START TIMER:: [Payload Operation :{F861E540-8C1D-4052-9877-61CB41C02B7A}]
[ 7476] Wed Oct 03 09:02:53 2012 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Installer Operation: PayloadInstaller
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Request to install payload
Payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: Calling ARKEngine from path C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE6\resources
Extracting assets...
Extracting assets complete. Number assets: 1
CustomizedPatch property not found in database
Beginning installation for payload at C:\Users\Arnold\AppData\Local\Temp\Adobe\AAMUpdater\AdobeIllustrator16-mul_x64\16.3\Setup \payloads\AdobeIllustrator16-mul_x64-170912172642\Install.db
[ 7476] Wed Oct 03 09:02:57 2012 ERROR
DF044: Failed to restore ACL of file C:\Program Files\Adobe\Adobe Illustrator CS6 (64 Bit)\Support Files\Contents\Windows\Illustrator.exe , Error : 5(Seq 26)
DW063: Command ARKPatchCommand failed.(Seq 26)
[ 7476] Wed Oct 03 09:02:57 2012 INFO
Completing installation for payload at C:\Users\Arnold\AppData\Local\Temp\Adobe\AAMUpdater\AdobeIllustrator16-mul_x64\16.3\Setup \payloads\AdobeIllustrator16-mul_x64-170912172642\Install.db
[ 8624] Wed Oct 03 09:02:58 2012 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 2 =*=*=*=*=*=*=*=*=*=*=*=*=*
:: END TIMER :: [Payload Operation :{F861E540-8C1D-4052-9877-61CB41C02B7A}] took 5403.62 milliseconds (5.40362 seconds) DTR = 1362.79 KBPS (1.33085 MBPS)
User specified overrideFile:
The csu inventory was not updated for payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0, value of local var is -1
Calling the ROLLBACK custom action code for pre-install for payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0
No operation. We're done:
[ 8624] Wed Oct 03 09:03:00 2012 INFO
Total components installed: 0
Total components repaired: 0
Successfully removed 1 component:
- Adobe Illustrator CS6 Core (64 Bit)_16.0.1_AdobeIllustrator16-mul_x64
[ 8624] Wed Oct 03 09:03:00 2012 ERROR
DW050: The following payload errors were found during install:
DW050: - Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64: Install failed
[ 8624] Wed Oct 03 09:03:00 2012 INFO
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Restarting your computer is recommended:
In order to complete the installation, please restart the computer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Call PostSession Custom Hook
:: END TIMER :: [Total Timer] took 16166.7 milliseconds (16.1667 seconds) DTR = 883.791 KBPS (0.863077 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 0 warning(s)
----------- Payload: {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 -----------
ERROR: DF044: Failed to restore ACL of file C:\Program Files\Adobe\Adobe Illustrator CS6 (64 Bit)\Support Files\Contents\Windows\Illustrator.exe , Error : 5(Seq 26)
ERROR: DW063: Command ARKPatchCommand failed.(Seq 26)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64: Install failed
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
[ 8624] Wed Oct 03 09:03:01 2012 INFO
Exit Code: 7 - Unable to complete Silent workflow.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DF044, DW063 ...
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Visit http://www.adobe.com/go/loganalyzer/ for more information
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
START - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
RIBS version: 6.2.10.0
Win OS version: 6.1.1.0 64 bit Type: 1
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
deploymentFile option not given
CHECK : Another Native OS installer already running
Create Required Folders
Assuming install mode
Looking up install source path
Sync Media DB ...
::START TIMER:: [Sync Media DB]
Pre check media db sync
End of Pre check media db sync. Exit code: 0
:: END TIMER :: [Sync Media DB] took 17.2089 milliseconds (0.0172089 seconds) DTR = 232.438 KBPS (0.22699 MBPS)
Ready to initialize session to start with ...
::START TIMER:: [CreatePayloadSession]
-------------------- BEGIN - Updating Media Sources - BEGIN --------------------
Updated source path: C:\Users\Arnold\AppData\Local\Temp\Adobe\AAMUpdater\AdobeIllustrator16-mul_x64\16.3\Setup
Updating media info for: {F861E540-8C1D-4052-9877-61CB41C02B7A}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, Media Name:
Path: C:\Users\Arnold\AppData\Local\Temp\Adobe\AAMUpdater\AdobeIllustrator16-mul_x64\16.3\Setup \payloads\AdobeIllustrator16-mul_x64-170912172642\Install.db
-------------------- END - Updating Media Sources - END --------------------
Supported RIBS version range: [0.0.66.0,6.2.10.0]
----------------- CreatePayloadSession: machine is x64 ---------------
[ 9980] Wed Oct 03 09:07:39 2012 INFO
______ Verify Dependency Subscribers ______
BEGIN Operation order for all session payloads: mediaGroup (requires,satisfies)
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: 0 (0,0)
END Operation order for all session payloads: mediaGroup (requires,satisfies)
Patch {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 can be applied to product {9D3BB9DA-1F59-4DCF-A0BB-691FA8EA2582} Adobe Illustrator CS6 Core (64 Bit) 16.0.0.0
[ 9980] Wed Oct 03 09:07:40 2012 INFO
Overwrite property "extensionsOnly" to: 1
Overwrite property "mode" to: silent
Overwrite property "patchesOnly" to: 1
Overwrite property "workflow" to: updater
Found payload actions:
Deciding what installer mode to use...
BEGIN Setting requested payload actions
Value returned on lookup of payload: {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 is: false
Action string for {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 is install
END Setting requested payload actions
Collected advanced path check information for INSTALLDIR
INSTALLDIR is a well-formed path
INSTALLDIR is not the root path
INSTALLDIR is on a local volume
INSTALLDIR is on a writable volume
INSTALLDIR is not on a case sensitive volume
INSTALLDIR passed path basic path validation: C:\Program Files\Adobe
BEGIN InstallOperationsQueue Unordered operations
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Unordered operations
BEGIN InstallOperationsQueue Ordered operations
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Ordered operations
Payloads passed preflight validation.
Call PreSession Custom Hook
BEGIN InstallOperationsQueue Unordered operations
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Unordered operations
BEGIN InstallOperationsQueue Ordered operations
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Ordered operations
Calling the custom action code for pre-install for payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0
::START TIMER:: [Payload Operation :{F861E540-8C1D-4052-9877-61CB41C02B7A}]
[ 10008] Wed Oct 03 09:07:40 2012 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Installer Operation: PayloadInstaller
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Request to install payload
Payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: Calling ARKEngine from path C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE6\resources
Extracting assets...
Extracting assets complete. Number assets: 1
CustomizedPatch property not found in database
Beginning installation for payload at C:\Users\Arnold\AppData\Local\Temp\Adobe\AAMUpdater\AdobeIllustrator16-mul_x64\16.3\Setup \payloads\AdobeIllustrator16-mul_x64-170912172642\Install.db
[ 10008] Wed Oct 03 09:07:42 2012 ERROR
DF022: Pre checksum mismatch for file "C:\Program Files\Adobe\Adobe Illustrator CS6 (64 Bit)\Support Files\Contents\Windows\Illustrator.exe"(Seq 26)
DW063: Command ARKPatchCommand failed.(Seq 26)
[ 10008] Wed Oct 03 09:07:42 2012 INFO
Completing installation for payload at C:\Users\Arnold\AppData\Local\Temp\Adobe\AAMUpdater\AdobeIllustrator16-mul_x64\16.3\Setup \payloads\AdobeIllustrator16-mul_x64-170912172642\Install.db
[ 9980] Wed Oct 03 09:07:44 2012 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 2 =*=*=*=*=*=*=*=*=*=*=*=*=*
:: END TIMER :: [Payload Operation :{F861E540-8C1D-4052-9877-61CB41C02B7A}] took 3603.06 milliseconds (3.60306 seconds)
User specified overrideFile:
The csu inventory was not updated for payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0, value of local var is -1
Calling the ROLLBACK custom action code for pre-install for payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0
No operation. We're done:
[ 9980] Wed Oct 03 09:07:46 2012 INFO
Total components installed: 0
Total components repaired: 0
Total components removed: 0
[ 9980] Wed Oct 03 09:07:46 2012 ERROR
DW050: The following payload errors were found during install:
DW050: - Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64: Install failed
[ 9980] Wed Oct 03 09:07:46 2012 INFO
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Restarting your computer is recommended:
In order to complete the installation, please restart the computer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Call PostSession Custom Hook
:: END TIMER :: [Total Timer] took 9089.42 milliseconds (9.08942 seconds) DTR = 1.32022 KBPS (0.00128927 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 0 warning(s)
----------- Payload: {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 -----------
ERROR: DF022: Pre checksum mismatch for file "C:\Program Files\Adobe\Adobe Illustrator CS6 (64 Bit)\Support Files\Contents\Windows\Illustrator.exe"(Seq 26)
ERROR: DW063: Command ARKPatchCommand failed.(Seq 26)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64: Install failed
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
[ 9980] Wed Oct 03 09:07:47 2012 INFO
Exit Code: 7 - Unable to complete Silent workflow.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DF022, DW063 ...
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Visit http://www.adobe.com/go/loganalyzer/ for more information
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
START - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
RIBS version: 6.2.10.0
Win OS version: 6.1.1.0 64 bit Type: 1
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
deploymentFile option not given
CHECK : Another Native OS installer already running
Create Required Folders
Assuming install mode
Looking up install source path
Sync Media DB ...
::START TIMER:: [Sync Media DB]
Pre check media db sync
End of Pre check media db sync. Exit code: 0
:: END TIMER :: [Sync Media DB] took 34.6525 milliseconds (0.0346525 seconds)
Ready to initialize session to start with ...
::START TIMER:: [CreatePayloadSession]
-------------------- BEGIN - Updating Media Sources - BEGIN --------------------
Updated source path: C:\Users\Arnold\Downloads\AdobeIllustrator16.0.2_x64
Updating media info for: {F861E540-8C1D-4052-9877-61CB41C02B7A}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, Media Name:
Path: C:\Users\Arnold\Downloads\AdobeIllustrator16.0.2_x64\payloads\AdobeIllustrator16-mul_x64- 170912172642\Install.db
-------------------- END - Updating Media Sources - END --------------------
Supported RIBS version range: [0.0.66.0,6.2.10.0]
----------------- CreatePayloadSession: machine is x64 ---------------
[ 9440] Wed Oct 03 09:12:04 2012 INFO
______ Verify Dependency Subscribers ______
BEGIN Operation order for all session payloads: mediaGroup (requires,satisfies)
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: 0 (0,0)
END Operation order for all session payloads: mediaGroup (requires,satisfies)
Patch {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 can be applied to product {9D3BB9DA-1F59-4DCF-A0BB-691FA8EA2582} Adobe Illustrator CS6 Core (64 Bit) 16.0.0.0
[ 9440] Wed Oct 03 09:12:05 2012 INFO
Overwrite property "DEVersion" to: 6.0
Overwrite property "extensionsOnly" to: 1
Overwrite property "mode" to: silent
Overwrite property "patchesOnly" to: 1
Overwrite property "workflow" to: updater
Found payload actions:
Deciding what installer mode to use...
BEGIN Setting requested payload actions
Value returned on lookup of payload: {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 is: false
Action string for {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 is install
END Setting requested payload actions
Collected advanced path check information for INSTALLDIR
INSTALLDIR is a well-formed path
INSTALLDIR is not the root path
INSTALLDIR is on a local volume
INSTALLDIR is on a writable volume
INSTALLDIR is not on a case sensitive volume
INSTALLDIR passed path basic path validation: C:\Program Files\Adobe
BEGIN InstallOperationsQueue Unordered operations
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Unordered operations
BEGIN InstallOperationsQueue Ordered operations
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Ordered operations
Payloads passed preflight validation.
Call PreSession Custom Hook
BEGIN InstallOperationsQueue Unordered operations
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Unordered operations
BEGIN InstallOperationsQueue Ordered operations
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Ordered operations
Calling the custom action code for pre-install for payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0
::START TIMER:: [Payload Operation :{F861E540-8C1D-4052-9877-61CB41C02B7A}]
[ 5820] Wed Oct 03 09:12:05 2012 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Installer Operation: PayloadInstaller
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Request to install payload
Payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: Calling ARKEngine from path C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE6\resources
Extracting assets...
[ 5820] Wed Oct 03 09:12:06 2012 INFO
Extracting assets complete. Number assets: 1
CustomizedPatch property not found in database
Beginning installation for payload at C:\Users\Arnold\Downloads\AdobeIllustrator16.0.2_x64\payloads\AdobeIllustrator16-mul_x64- 170912172642\Install.db
[ 5820] Wed Oct 03 09:12:08 2012 ERROR
DF022: Pre checksum mismatch for file "C:\Program Files\Adobe\Adobe Illustrator CS6 (64 Bit)\Support Files\Contents\Windows\Illustrator.exe"(Seq 26)
DW063: Command ARKPatchCommand failed.(Seq 26)
[ 5820] Wed Oct 03 09:12:08 2012 INFO
Completing installation for payload at C:\Users\Arnold\Downloads\AdobeIllustrator16.0.2_x64\payloads\AdobeIllustrator16-mul_x64- 170912172642\Install.db
[ 9440] Wed Oct 03 09:12:09 2012 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 2 =*=*=*=*=*=*=*=*=*=*=*=*=*
:: END TIMER :: [Payload Operation :{F861E540-8C1D-4052-9877-61CB41C02B7A}] took 3708.19 milliseconds (3.70819 seconds) DTR = 138.073 KBPS (0.134837 MBPS)
User specified overrideFile:
The csu inventory was not updated for payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0, value of local var is -1
Calling the ROLLBACK custom action code for pre-install for payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0
No operation. We're done:
[ 9440] Wed Oct 03 09:12:11 2012 INFO
Total components installed: 0
Total components repaired: 0
Total components removed: 0
[ 9440] Wed Oct 03 09:12:11 2012 ERROR
DW050: The following payload errors were found during install:
DW050: - Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64: Install failed
[ 9440] Wed Oct 03 09:12:11 2012 INFO
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Restarting your computer is recommended:
In order to complete the installation, please restart the computer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Call PostSession Custom Hook
:: END TIMER :: [Total Timer] took 9880.02 milliseconds (9.88002 seconds) DTR = 52.6315 KBPS (0.0513979 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 0 warning(s)
----------- Payload: {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 -----------
ERROR: DF022: Pre checksum mismatch for file "C:\Program Files\Adobe\Adobe Illustrator CS6 (64 Bit)\Support Files\Contents\Windows\Illustrator.exe"(Seq 26)
ERROR: DW063: Command ARKPatchCommand failed.(Seq 26)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64: Install failed
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
[ 9440] Wed Oct 03 09:12:13 2012 INFO
Exit Code: 7 - Unable to complete Silent workflow.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DF022, DW063 ...
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Visit http://www.adobe.com/go/loganalyzer/ for more information
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
START - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
RIBS version: 6.2.10.0
Win OS version: 6.1.1.0 64 bit Type: 1
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
deploymentFile option not given
CHECK : Another Native OS installer already running
Create Required Folders
Assuming install mode
Looking up install source path
Sync Media DB ...
::START TIMER:: [Sync Media DB]
Pre check media db sync
End of Pre check media db sync. Exit code: 0
:: END TIMER :: [Sync Media DB] took 30.256 milliseconds (0.030256 seconds)
Ready to initialize session to start with ...
::START TIMER:: [CreatePayloadSession]
-------------------- BEGIN - Updating Media Sources - BEGIN --------------------
Updated source path: C:\Users\Arnold\Downloads\AdobeIllustrator16.0.2_x64
Updating media info for: {F861E540-8C1D-4052-9877-61CB41C02B7A}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, Media Name:
Path: C:\Users\Arnold\Downloads\AdobeIllustrator16.0.2_x64\payloads\AdobeIllustrator16-mul_x64- 170912172642\Install.db
-------------------- END - Updating Media Sources - END --------------------
Supported RIBS version range: [0.0.66.0,6.2.10.0]
----------------- CreatePayloadSession: machine is x64 ---------------
[ 5900] Wed Oct 03 09:13:19 2012 INFO
______ Verify Dependency Subscribers ______
BEGIN Operation order for all session payloads: mediaGroup (requires,satisfies)
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: 0 (0,0)
END Operation order for all session payloads: mediaGroup (requires,satisfies)
Patch {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 can be applied to product {9D3BB9DA-1F59-4DCF-A0BB-691FA8EA2582} Adobe Illustrator CS6 Core (64 Bit) 16.0.0.0
Overwrite property "DEVersion" to: 6.0
Overwrite property "extensionsOnly" to: 1
Overwrite property "mode" to: silent
Overwrite property "patchesOnly" to: 1
Overwrite property "workflow" to: updater
Found payload actions:
Deciding what installer mode to use...
BEGIN Setting requested payload actions
Value returned on lookup of payload: {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 is: false
Action string for {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 is install
END Setting requested payload actions
Collected advanced path check information for INSTALLDIR
INSTALLDIR is a well-formed path
INSTALLDIR is not the root path
INSTALLDIR is on a local volume
INSTALLDIR is on a writable volume
INSTALLDIR is not on a case sensitive volume
INSTALLDIR passed path basic path validation: C:\Program Files\Adobe
[ 5900] Wed Oct 03 09:13:20 2012 INFO
BEGIN InstallOperationsQueue Unordered operations
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Unordered operations
BEGIN InstallOperationsQueue Ordered operations
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Ordered operations
Payloads passed preflight validation.
Call PreSession Custom Hook
BEGIN InstallOperationsQueue Unordered operations
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Unordered operations
BEGIN InstallOperationsQueue Ordered operations
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Ordered operations
Calling the custom action code for pre-install for payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0
::START TIMER:: [Payload Operation :{F861E540-8C1D-4052-9877-61CB41C02B7A}]
[ 9380] Wed Oct 03 09:13:20 2012 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Installer Operation: PayloadInstaller
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Request to install payload
Payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: Calling ARKEngine from path C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE6\resources
Extracting assets...
Extracting assets complete. Number assets: 1
CustomizedPatch property not found in database
Beginning installation for payload at C:\Users\Arnold\Downloads\AdobeIllustrator16.0.2_x64\payloads\AdobeIllustrator16-mul_x64- 170912172642\Install.db
[ 9380] Wed Oct 03 09:13:23 2012 ERROR
DF022: Pre checksum mismatch for file "C:\Program Files\Adobe\Adobe Illustrator CS6 (64 Bit)\Support Files\Contents\Windows\Illustrator.exe"(Seq 26)
DW063: Command ARKPatchCommand failed.(Seq 26)
[ 9380] Wed Oct 03 09:13:23 2012 INFO
Completing installation for payload at C:\Users\Arnold\Downloads\AdobeIllustrator16.0.2_x64\payloads\AdobeIllustrator16-mul_x64- 170912172642\Install.db
[ 5900] Wed Oct 03 09:13:24 2012 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 2 =*=*=*=*=*=*=*=*=*=*=*=*=*
:: END TIMER :: [Payload Operation :{F861E540-8C1D-4052-9877-61CB41C02B7A}] took 3706.87 milliseconds (3.70687 seconds)
User specified overrideFile:
The csu inventory was not updated for payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0, value of local var is -1
Calling the ROLLBACK custom action code for pre-install for payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0
No operation. We're done:
[ 5900] Wed Oct 03 09:13:26 2012 INFO
Total components installed: 0
Total components repaired: 0
Total components removed: 0
[ 5900] Wed Oct 03 09:13:26 2012 ERROR
DW050: The following payload errors were found during install:
DW050: - Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64: Install failed
[ 5900] Wed Oct 03 09:13:26 2012 INFO
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Restarting your computer is recommended:
In order to complete the installation, please restart the computer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Call PostSession Custom Hook
:: END TIMER :: [Total Timer] took 9986.08 milliseconds (9.98608 seconds) DTR = 0.801116 KBPS (0.000782339 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 0 warning(s)
----------- Payload: {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 -----------
ERROR: DF022: Pre checksum mismatch for file "C:\Program Files\Adobe\Adobe Illustrator CS6 (64 Bit)\Support Files\Contents\Windows\Illustrator.exe"(Seq 26)
ERROR: DW063: Command ARKPatchCommand failed.(Seq 26)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64: Install failed
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
[ 5900] Wed Oct 03 09:13:28 2012 INFO
Exit Code: 7 - Unable to complete Silent workflow.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DF022, DW063 ...
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
[ 3212] Wed Oct 03 09:30:21 2012 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Visit http://www.adobe.com/go/loganalyzer/ for more information
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
START - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
RIBS version: 6.2.10.0
Win OS version: 6.1.1.0 64 bit Type: 1
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
deploymentFile option not given
CHECK : Another Native OS installer already running
Create Required Folders
Assuming install mode
Looking up install source path
Sync Media DB ...
::START TIMER:: [Sync Media DB]
Pre check media db sync
End of Pre check media db sync. Exit code: 0
:: END TIMER :: [Sync Media DB] took 20.4218 milliseconds (0.0204218 seconds)
Ready to initialize session to start with ...
::START TIMER:: [CreatePayloadSession]
-------------------- BEGIN - Updating Media Sources - BEGIN --------------------
Updated source path: C:\Users\Arnold\Downloads\AdobeIllustrator16.0.2_x64
Updating media info for: {F861E540-8C1D-4052-9877-61CB41C02B7A}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, Media Name:
Path: C:\Users\Arnold\Downloads\AdobeIllustrator16.0.2_x64\payloads\AdobeIllustrator16-mul_x64- 170912172642\Install.db
-------------------- END - Updating Media Sources - END --------------------
Supported RIBS version range: [0.0.66.0,6.2.10.0]
----------------- CreatePayloadSession: machine is x64 ---------------
[ 3212] Wed Oct 03 09:30:23 2012 INFO
______ Verify Dependency Subscribers ______
BEGIN Operation order for all session payloads: mediaGroup (requires,satisfies)
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: 0 (0,0)
END Operation order for all session payloads: mediaGroup (requires,satisfies)
Patch {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 can be applied to product {9D3BB9DA-1F59-4DCF-A0BB-691FA8EA2582} Adobe Illustrator CS6 Core (64 Bit) 16.0.0.0
Overwrite property "DEVersion" to: 6.0
Overwrite property "extensionsOnly" to: 1
Overwrite property "mode" to: silent
Overwrite property "patchesOnly" to: 1
Overwrite property "workflow" to: updater
Found payload actions:
Deciding what installer mode to use...
BEGIN Setting requested payload actions
Value returned on lookup of payload: {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 is: false
Action string for {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 is install
END Setting requested payload actions
Collected advanced path check information for INSTALLDIR
INSTALLDIR is a well-formed path
INSTALLDIR is not the root path
INSTALLDIR is on a local volume
INSTALLDIR is on a writable volume
INSTALLDIR is not on a case sensitive volume
INSTALLDIR passed path basic path validation: C:\Program Files\Adobe
[ 3212] Wed Oct 03 09:30:24 2012 INFO
BEGIN InstallOperationsQueue Unordered operations
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Unordered operations
BEGIN InstallOperationsQueue Ordered operations
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Ordered operations
Payloads passed preflight validation.
Call PreSession Custom Hook
BEGIN InstallOperationsQueue Unordered operations
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Unordered operations
BEGIN InstallOperationsQueue Ordered operations
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Ordered operations
Calling the custom action code for pre-install for payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0
::START TIMER:: [Payload Operation :{F861E540-8C1D-4052-9877-61CB41C02B7A}]
[ 7544] Wed Oct 03 09:30:24 2012 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Installer Operation: PayloadInstaller
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Request to install payload
Payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: Calling ARKEngine from path C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE6\resources
Extracting assets...
Extracting assets complete. Number assets: 1
CustomizedPatch property not found in database
Beginning installation for payload at C:\Users\Arnold\Downloads\AdobeIllustrator16.0.2_x64\payloads\AdobeIllustrator16-mul_x64- 170912172642\Install.db
[ 7544] Wed Oct 03 09:30:26 2012 ERROR
DW063: Command ARKPatchCommand failed.(Seq 26)
[ 7544] Wed Oct 03 09:30:26 2012 INFO
Completing installation for payload at C:\Users\Arnold\Downloads\AdobeIllustrator16.0.2_x64\payloads\AdobeIllustrator16-mul_x64- 170912172642\Install.db
[ 3212] Wed Oct 03 09:30:28 2012 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 2 =*=*=*=*=*=*=*=*=*=*=*=*=*
:: END TIMER :: [Payload Operation :{F861E540-8C1D-4052-9877-61CB41C02B7A}] took 3606.98 milliseconds (3.60698 seconds) DTR = 63734.2 KBPS (62.2404 MBPS)
User specified overrideFile:
The csu inventory was not updated for payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0, value of local var is -1
Calling the ROLLBACK custom action code for pre-install for payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0
No operation. We're done:
[ 3212] Wed Oct 03 09:30:30 2012 INFO
Total components installed: 0
Total components repaired: 0
Total components removed: 0
[ 3212] Wed Oct 03 09:30:30 2012 ERROR
DW050: The following payload errors were found during install:
DW050: - Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64: Install failed
[ 3212] Wed Oct 03 09:30:30 2012 INFO
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Restarting your computer is recommended:
In order to complete the installation, please restart the computer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Call PostSession Custom Hook
:: END TIMER :: [Total Timer] took 9847.33 milliseconds (9.84733 seconds) DTR = 23348.1 KBPS (22.8008 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s), 0 warning(s)
----------- Payload: {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 -----------
ERROR: DW063: Command ARKPatchCommand failed.(Seq 26)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64: Install failed
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
[ 3212] Wed Oct 03 09:30:32 2012 INFO
Exit Code: 7 - Unable to complete Silent workflow.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW050, DW063 ...
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Visit http://www.adobe.com/go/loganalyzer/ for more information
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
START - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
RIBS version: 6.2.10.0
Win OS version: 6.1.1.0 64 bit Type: 1
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
deploymentFile option not given
CHECK : Another Native OS installer already running
Create Required Folders
Assuming install mode
Looking up install source path
Sync Media DB ...
::START TIMER:: [Sync Media DB]
Pre check media db sync
End of Pre check media db sync. Exit code: 0
:: END TIMER :: [Sync Media DB] took 17.1592 milliseconds (0.0171592 seconds)
Ready to initialize session to start with ...
::START TIMER:: [CreatePayloadSession]
-------------------- BEGIN - Updating Media Sources - BEGIN --------------------
Updated source path: C:\Users\Arnold\AppData\Local\Temp\Adobe\AAMUpdater\AdobeIllustrator16-mul_x64\16.3\Setup
Updating media info for: {F861E540-8C1D-4052-9877-61CB41C02B7A}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, Media Name:
Path: C:\Users\Arnold\AppData\Local\Temp\Adobe\AAMUpdater\AdobeIllustrator16-mul_x64\16.3\Setup \payloads\AdobeIllustrator16-mul_x64-170912172642\Install.db
-------------------- END - Updating Media Sources - END --------------------
Supported RIBS version range: [0.0.66.0,6.2.10.0]
----------------- CreatePayloadSession: machine is x64 ---------------
[ 2092] Wed Oct 03 09:31:57 2012 INFO
______ Verify Dependency Subscribers ______
BEGIN Operation order for all session payloads: mediaGroup (requires,satisfies)
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: 0 (0,0)
END Operation order for all session payloads: mediaGroup (requires,satisfies)
Patch {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 can be applied to product {9D3BB9DA-1F59-4DCF-A0BB-691FA8EA2582} Adobe Illustrator CS6 Core (64 Bit) 16.0.0.0
Overwrite property "extensionsOnly" to: 1
Overwrite property "mode" to: silent
Overwrite property "patchesOnly" to: 1
Overwrite property "workflow" to: updater
Found payload actions:
Deciding what installer mode to use...
BEGIN Setting requested payload actions
Value returned on lookup of payload: {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 is: false
Action string for {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 is install
END Setting requested payload actions
Collected advanced path check information for INSTALLDIR
INSTALLDIR is a well-formed path
INSTALLDIR is not the root path
INSTALLDIR is on a local volume
INSTALLDIR is on a writable volume
INSTALLDIR is not on a case sensitive volume
INSTALLDIR passed path basic path validation: C:\Program Files\Adobe
BEGIN InstallOperationsQueue Unordered operations
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Unordered operations
BEGIN InstallOperationsQueue Ordered operations
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Ordered operations
Payloads passed preflight validation.
Call PreSession Custom Hook
BEGIN InstallOperationsQueue Unordered operations
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Unordered operations
BEGIN InstallOperationsQueue Ordered operations
{F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: with operation install
END InstallOperationsQueue Ordered operations
Calling the custom action code for pre-install for payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0
::START TIMER:: [Payload Operation :{F861E540-8C1D-4052-9877-61CB41C02B7A}]
[ 6476] Wed Oct 03 09:31:57 2012 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Installer Operation: PayloadInstaller
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Request to install payload
Payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0: Calling ARKEngine from path C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE6\resources
Extracting assets...
[ 6476] Wed Oct 03 09:31:58 2012 INFO
Extracting assets complete. Number assets: 1
CustomizedPatch property not found in database
Beginning installation for payload at C:\Users\Arnold\AppData\Local\Temp\Adobe\AAMUpdater\AdobeIllustrator16-mul_x64\16.3\Setup \payloads\AdobeIllustrator16-mul_x64-170912172642\Install.db
[ 6476] Wed Oct 03 09:32:00 2012 ERROR
DW063: Command ARKPatchCommand failed.(Seq 26)
[ 6476] Wed Oct 03 09:32:00 2012 INFO
Completing installation for payload at C:\Users\Arnold\AppData\Local\Temp\Adobe\AAMUpdater\AdobeIllustrator16-mul_x64\16.3\Setup \payloads\AdobeIllustrator16-mul_x64-170912172642\Install.db
[ 2092] Wed Oct 03 09:32:01 2012 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 2 =*=*=*=*=*=*=*=*=*=*=*=*=*
:: END TIMER :: [Payload Operation :{F861E540-8C1D-4052-9877-61CB41C02B7A}] took 3703.05 milliseconds (3.70305 seconds)
User specified overrideFile:
The csu inventory was not updated for payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0, value of local var is -1
Calling the ROLLBACK custom action code for pre-install for payload {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0
No operation. We're done:
[ 2092] Wed Oct 03 09:32:03 2012 INFO
Total components installed: 0
Total components repaired: 0
Total components removed: 0
[ 2092] Wed Oct 03 09:32:03 2012 ERROR
DW050: The following payload errors were found during install:
DW050: - Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64: Install failed
[ 2092] Wed Oct 03 09:32:03 2012 INFO
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Restarting your computer is recommended:
In order to complete the installation, please restart the computer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Call PostSession Custom Hook
:: END TIMER :: [Total Timer] took 9202.39 milliseconds (9.20239 seconds) DTR = 0.869339 KBPS (0.000848964 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s), 0 warning(s)
----------- Payload: {F861E540-8C1D-4052-9877-61CB41C02B7A} Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64 16.0.2.0 -----------
ERROR: DW063: Command ARKPatchCommand failed.(Seq 26)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Illustrator CS6 Core (64 Bit)_16.0.2_AdobeIllustrator16-mul_x64: Install failed
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
[ 2092] Wed Oct 03 09:32:04 2012 INFO
Exit Code: 7 - Unable to complete Silent workflow.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW050, DW063 ...
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Visit http://www.adobe.com/go/loganalyzer/ for more information
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
START - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
RIBS version: 6.2.10.0
Win OS version: 6.1.1.0 64 bit Type: 1
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
deploymentFile option not given
CHECK : Another Native OS installer already running
Create Required Folders
Assuming install mode
Looking up install source path
Sync Media DB ...
::START TIMER:: [Sync Media DB]
Pre check media db sync
End of Pre check media db sync. Exit code: 0
:: END TIMER :: [Sync Media DB] took 29.3211 milliseconds (0.0293211 seconds)
Ready to initialize sessionIt appears you are running into a permission issue writing to your temp directory.
Beginning installation for payload at C:\Users\Arnold\AppData\Local\Temp\Adobe\AAMUpdater\AdobeIllustrator1 6-mul_x64\16.3\Setup\payloads\AdobeIllustrator16-mul_x64-170912172642\ Install.db
[ 5568] Wed Oct 03 09:57:38 2012 ERROR
DW063: Command ARKPatchCommand failed.(Seq 26)
[ 5568] Wed Oct 03 09:57:38 2012 INFO
Completing installation for payload at C:\Users\Arnold\AppData\Local\Temp\Adobe\AAMUpdater\AdobeIllustrator1 6-mul_x64\16.3\Setup\payloads\AdobeIllustrator16-mul_x64-170912172642\ Install.db
You can try adjusting the permissions for C:\Users\Arnold\AppData\Local\Temp and all associated child objects.
Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html contains information on how you can adjust your permissions. -
Problem with ios certificate server not updating the CRL
Hi all,
The background is that i'm currently setting up a DMVPN solution with the ipsec tunnels between the spokes created using certificates.
I'm using a cisco 877 as the CA server (its running 12.4(6)T5) to provide the certificates to the spoke routers. This part is working fine - the spokes can request a certificate and get one issue all well and good.
The problem is on the CA, the CRL lifetime is set to 24 hours but the CA is not updating the CRL so when the spokes look for the revocation list (as set in their trustpoint) they are reporting an error that the CRL is out of date and won't connect.
If is do a '#sh crypto pki server' it lists a 'CRL NextUpdate timer. this has a timestamp that is 24 hours after the last certificate was revocked. The only way i can get the CRL to be re-generated is to revoke a certificate.
So, my question is, have i missed something here? I thought the CA would automatically generat a new CRL file every 24hours.
Can anyone help?
thanks.Hi Mark (?)
this seems to match this bug:
CSCsy95838 IOS CA: CRL not updated, update timer no started
However it does not mention if 12.4(6)T5 is affected, only that it was found in 12.4(15)T3 and resolved in 12.4(15)T10 and other more recent releases.
I would suggest trying the latest 12.4(15)Tx, 15.0(1)Mx or 15.1(4)Mx release if you can.
I supposed you've though of it, but just in case: as a workaround you can disable the CRL check on all the DMVPN routers, obviously they will still allow connections from routers with a revoked spoke.
As a (temporary?) replacement for a CRL, you could use a "certificate ACL" with which you can kind of create a "manual local CRL" :
crypto pki certificate map certACL 10
serial-number ne
serial-number ne
etc.
crypto pki trustpoint myTP
match certificate certACL
(note the "ne" stands for "not equal" so you are permitting any certificate whose serial number is not listed)
Obviously you would have to configure (and maintain!) this on each router participating in the DMVPN so this is cumbersome, but I suppose if you don't often revoke certs it might be an option.
hth
Herbert
If this post answers your question, please click the "Correct Answer" button -
Hi
I have few workstations that are not updating, I have re-install and Install but nothing seem to be working, I have rebooted and still no change, what could be the cause of these machines not to update? I am still very new on FEP and I would realy appreciate
any help
execmgr logs
Software Distribution Site Settings for the client are missing from WMI.
execmgr 2014/07/23 04:41:50 PM 4996 (0x1384)
Software Distribution Site Settings for the client are missing from WMI.
execmgr 2014/07/23 04:41:50 PM 4996 (0x1384)
Common Client Agent Settings for the client are missing from WMI.
execmgr 2014/07/23 04:41:50 PM 4996 (0x1384)
Software distribution agent was enabled execmgr 2014/07/23 04:43:56 PM
6236 (0x185C)
Policy arrived for parent package CEN00022 program Install execmgr
2014/07/23 04:43:56 PM 7028 (0x1B74)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramOfferReceivedEvent
AdvertisementId = "CEN20030";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723144356.058000+000";
MachineName = "K41PHETOM";
ProcessID = 8784;
SiteCode = "P02";
ThreadID = 7028;
execmgr 2014/07/23 04:43:56 PM 7028 (0x1B74)
Policy arrived for parent package CEN00185 program * execmgr
2014/07/23 04:43:56 PM 7028 (0x1B74)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramOfferReceivedEvent
AdvertisementId = "CEN2024D";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723144356.083000+000";
MachineName = "K41PHETOM";
ProcessID = 8784;
SiteCode = "P02";
ThreadID = 7028;
execmgr 2014/07/23 04:43:56 PM 7028 (0x1B74)
Policy arrived for parent package CEN0014D program * execmgr
2014/07/23 04:43:56 PM 7028 (0x1B74)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramOfferReceivedEvent
AdvertisementId = "CEN2031C";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723144356.094000+000";
MachineName = "K41PHETOM";
ProcessID = 8784;
SiteCode = "P02";
ThreadID = 7028;
execmgr 2014/07/23 04:43:56 PM 7028 (0x1B74)
Requesting content from CAS for package CEN00022 version 652 execmgr
2014/07/23 04:43:56 PM 5172 (0x1434)
Successfully created a content request handle {315A371A-2B8F-48B7-8AEA-6FD09FB3B914} for the package CEN00022 version 652
execmgr 2014/07/23 04:43:56 PM 5172 (0x1434)
Program Install change to state STATE_ADVANCED_DOWNLOAD content in progress
execmgr 2014/07/23 04:43:56 PM 5172 (0x1434)
Execution Request for package CEN00022 program Install state change from NotExist to AdvancedDownload
execmgr 2014/07/23 04:43:56 PM 5172 (0x1434)
Mandatory execution requested for program Install and advertisement CEN20030
execmgr 2014/07/23 04:43:56 PM 5204 (0x1454)
Creating mandatory request for advert CEN20030, program Install, package CEN00022
execmgr 2014/07/23 04:43:56 PM 5204 (0x1454)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistWaitingContentEvent
AdvertisementId = "CEN20030";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723144356.379000+000";
MachineName = "K41PHETOM";
PackageName = "CEN00022";
PackageVersion = "652";
ProcessID = 8784;
ProgramName = "Install";
SiteCode = "P02";
ThreadID = 5204;
execmgr 2014/07/23 04:43:56 PM 5204 (0x1454)
Successfully raised SoftDistWaitingContentEvent event for program Install
execmgr 2014/07/23 04:43:56 PM 5204 (0x1454)
Execution Request for package CEN00022 program Install state change from WaitingDependency to WaitingContent
execmgr 2014/07/23 04:43:56 PM 5204 (0x1454)
Could not find the policy in WMI for package CEN00184 program Per-system unattended
execmgr 2014/07/23 04:43:56 PM 3064 (0x0BF8)
DeletedPolicy object is not found.(0x80002004) execmgr
2014/07/23 04:43:56 PM 3064 (0x0BF8)
Mandatory execution requested for program * and advertisement CEN2024D
execmgr 2014/07/23 04:43:56 PM 5204 (0x1454)
Creating mandatory request for advert CEN2024D, program *, package CEN00185
execmgr 2014/07/23 04:43:56 PM 5204 (0x1454)
The program * will not run because it has been run before and it succeeded and policy indicates it should rerun only it it has previously failed.
execmgr 2014/07/23 04:43:56 PM 5204 (0x1454)
CreateMandatoryRequestRecursively policy * no need to re-run execmgr
2014/07/23 04:43:56 PM 5204 (0x1454)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramHasRunBeforeWithoutFailing
AdvertisementId = "CEN2024D";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723144356.457000+000";
LastRunTime = "2013/12/03 07:59:12";
MachineName = "K41PHETOM";
PackageName = "CEN00185";
ProcessID = 8784;
ProgramName = "*";
SiteCode = "P02";
ThreadID = 5204;
execmgr 2014/07/23 04:43:56 PM 5204 (0x1454)
Could not find the policy in WMI for package CEN00126 program Per-system unattended
execmgr 2014/07/23 04:43:56 PM 9176 (0x23D8)
DeletedPolicy object is not found.(0x80002004) execmgr
2014/07/23 04:43:56 PM 9176 (0x23D8)
Mandatory execution requested for program * and advertisement CEN2031C
execmgr 2014/07/23 04:43:56 PM 3064 (0x0BF8)
Creating mandatory request for advert CEN2031C, program *, package CEN0014D
execmgr 2014/07/23 04:43:56 PM 3064 (0x0BF8)
The program * will not run because it has been run before and it succeeded and policy indicates it should rerun only it it has previously failed.
execmgr 2014/07/23 04:43:56 PM 3064 (0x0BF8)
CreateMandatoryRequestRecursively policy * no need to re-run execmgr
2014/07/23 04:43:56 PM 3064 (0x0BF8)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramHasRunBeforeWithoutFailing
AdvertisementId = "CEN2031C";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723144356.525000+000";
LastRunTime = "2014/07/18 11:19:07";
MachineName = "K41PHETOM";
PackageName = "CEN0014D";
ProcessID = 8784;
ProgramName = "*";
SiteCode = "P02";
ThreadID = 3064;
execmgr 2014/07/23 04:43:56 PM 3064 (0x0BF8)
Policy arrived for parent package CEN00003 program KB977384 - Advanced Client Patch Install
execmgr 2014/07/23 04:45:57 PM 4704 (0x1260)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramOfferReceivedEvent
AdvertisementId = "CEN20067";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723144557.408000+000";
MachineName = "K41PHETOM";
ProcessID = 8784;
SiteCode = "P02";
ThreadID = 4704;
execmgr 2014/07/23 04:45:57 PM 4704 (0x1260)
Policy arrived for child program Per-system unattended execmgr
2014/07/23 04:45:57 PM 4704 (0x1260)
Requesting content from CAS for package CEN00003 version 2 execmgr
2014/07/23 04:45:57 PM 9584 (0x2570)
Successfully created a content request handle {4A54098F-E80B-4AB4-A732-148B47AA8EA9} for the package CEN00003 version 2
execmgr 2014/07/23 04:45:57 PM 9584 (0x2570)
Program KB977384 - Advanced Client Patch Install change to state STATE_ADVANCED_DOWNLOAD content in progress
execmgr 2014/07/23 04:45:57 PM 9584 (0x2570)
Execution Request for package CEN00003 program KB977384 - Advanced Client Patch Install state change from NotExist to AdvancedDownload
execmgr 2014/07/23 04:45:57 PM 9584 (0x2570)
Mandatory execution requested for program KB977384 - Advanced Client Patch Install and advertisement CEN20067
execmgr 2014/07/23 04:45:57 PM 6092 (0x17CC)
Creating mandatory request for advert CEN20067, program KB977384 - Advanced Client Patch Install, package CEN00003
execmgr 2014/07/23 04:45:57 PM 6092 (0x17CC)
Policy arrived for parent package CEN001B2 program Install - Adobe Flash Player 13.0.0.206
execmgr 2014/07/23 04:45:57 PM 4704 (0x1260)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramOfferReceivedEvent
AdvertisementId = "CEN20299";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723144557.613000+000";
MachineName = "K41PHETOM";
ProcessID = 8784;
SiteCode = "P02";
ThreadID = 4704;
execmgr 2014/07/23 04:45:57 PM 4704 (0x1260)
Policy arrived for parent package CEN00021 program Transnet-Workstation-Policy
execmgr 2014/07/23 04:45:57 PM 4704 (0x1260)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramOfferReceivedEvent
AdvertisementId = "CEN202AF";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723144557.624000+000";
MachineName = "K41PHETOM";
ProcessID = 8784;
SiteCode = "P02";
ThreadID = 4704;
execmgr 2014/07/23 04:45:57 PM 4704 (0x1260)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistWaitingContentEvent
AdvertisementId = "CEN20067";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723144557.633000+000";
MachineName = "K41PHETOM";
PackageName = "CEN00003";
PackageVersion = "2";
ProcessID = 8784;
ProgramName = "KB977384 - Advanced Client Patch Install";
SiteCode = "P02";
ThreadID = 6092;
execmgr 2014/07/23 04:45:57 PM 6092 (0x17CC)
Successfully raised SoftDistWaitingContentEvent event for program KB977384 - Advanced Client Patch Install
execmgr 2014/07/23 04:45:57 PM 6092 (0x17CC)
Execution Request for package CEN00003 program KB977384 - Advanced Client Patch Install state change from WaitingDependency to WaitingContent
execmgr 2014/07/23 04:45:57 PM 6092 (0x17CC)
The program Install - Adobe Flash Player 13.0.0.206 will not run because it has been run before and it succeeded and policy indicates it should rerun only it it has previously failed.
execmgr 2014/07/23 04:45:57 PM 5412 (0x1524)
Mandatory execution requested for program Install - Adobe Flash Player 13.0.0.206 and advertisement CEN20299
execmgr 2014/07/23 04:45:57 PM 7152 (0x1BF0)
Creating mandatory request for advert CEN20299, program Install - Adobe Flash Player 13.0.0.206, package CEN001B2
execmgr 2014/07/23 04:45:57 PM 7152 (0x1BF0)
The program Install - Adobe Flash Player 13.0.0.206 will not run because it has been run before and it succeeded and policy indicates it should rerun only it it has previously failed.
execmgr 2014/07/23 04:45:57 PM 7152 (0x1BF0)
CreateMandatoryRequestRecursively policy Install - Adobe Flash Player 13.0.0.206 no need to re-run
execmgr 2014/07/23 04:45:57 PM 7152 (0x1BF0)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramHasRunBeforeWithoutFailing
AdvertisementId = "CEN20299";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723144557.662000+000";
LastRunTime = "2014/05/19 14:56:20";
MachineName = "K41PHETOM";
PackageName = "CEN001B2";
ProcessID = 8784;
ProgramName = "Install - Adobe Flash Player 13.0.0.206";
SiteCode = "P02";
ThreadID = 7152;
execmgr 2014/07/23 04:45:57 PM 7152 (0x1BF0)
Requesting content from CAS for package CEN00021 version 5 execmgr
2014/07/23 04:45:57 PM 8864 (0x22A0)
Successfully created a content request handle {E3C13B58-D743-42D6-9841-0C56D6512C06} for the package CEN00021 version 5
execmgr 2014/07/23 04:45:57 PM 8864 (0x22A0)
Program Transnet-Workstation-Policy change to state STATE_ADVANCED_DOWNLOAD content in progress
execmgr 2014/07/23 04:45:57 PM 8864 (0x22A0)
Execution Request for package CEN00021 program Transnet-Workstation-Policy state change from NotExist to AdvancedDownload
execmgr 2014/07/23 04:45:57 PM 8864 (0x22A0)
Mandatory execution requested for program Transnet-Workstation-Policy and advertisement CEN202AF
execmgr 2014/07/23 04:45:57 PM 5204 (0x1454)
Creating mandatory request for advert CEN202AF, program Transnet-Workstation-Policy, package CEN00021
execmgr 2014/07/23 04:45:57 PM 5204 (0x1454)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistWaitingContentEvent
AdvertisementId = "CEN202AF";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723144557.822000+000";
MachineName = "K41PHETOM";
PackageName = "CEN00021";
PackageVersion = "5";
ProcessID = 8784;
ProgramName = "Transnet-Workstation-Policy";
SiteCode = "P02";
ThreadID = 5204;
execmgr 2014/07/23 04:45:57 PM 5204 (0x1454)
Successfully raised SoftDistWaitingContentEvent event for program Transnet-Workstation-Policy
execmgr 2014/07/23 04:45:57 PM 5204 (0x1454)
Execution Request for package CEN00021 program Transnet-Workstation-Policy state change from WaitingDependency to WaitingContent
execmgr 2014/07/23 04:45:57 PM 5204 (0x1454)
Policy arrived for child program Per-system unattended execmgr
2014/07/23 04:48:01 PM 4704 (0x1260)
Policy arrived for parent package CEN00021 program FEP Service Policy
execmgr 2014/07/23 04:50:18 PM 1496 (0x05D8)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramOfferReceivedEvent
AdvertisementId = "CEN201C5";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723145019.005000+000";
MachineName = "K41PHETOM";
ProcessID = 8784;
SiteCode = "P02";
ThreadID = 1496;
execmgr 2014/07/23 04:50:19 PM 1496 (0x05D8)
Policy arrived for parent package CEN00021 program FEP Service Policy
execmgr 2014/07/23 04:50:19 PM 1496 (0x05D8)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramOfferReceivedEvent
AdvertisementId = "CEN201C6";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723145019.017000+000";
MachineName = "K41PHETOM";
ProcessID = 8784;
SiteCode = "P02";
ThreadID = 1496;
execmgr 2014/07/23 04:50:19 PM 1496 (0x05D8)
Policy arrived for child program Per-system unattended execmgr
2014/07/23 04:50:19 PM 1496 (0x05D8)
Requesting content from CAS for package CEN00021 version 5 execmgr
2014/07/23 04:50:19 PM 6396 (0x18FC)
Successfully created a content request handle {9A438B1F-43D3-4135-A791-1E479B4661DB} for the package CEN00021 version 5
execmgr 2014/07/23 04:50:19 PM 6396 (0x18FC)
Program FEP Service Policy change to state STATE_ADVANCED_DOWNLOAD content in progress
execmgr 2014/07/23 04:50:19 PM 6396 (0x18FC)
Execution Request for package CEN00021 program FEP Service Policy state change from NotExist to AdvancedDownload
execmgr 2014/07/23 04:50:19 PM 6396 (0x18FC)
Mandatory execution requested for program FEP Service Policy and advertisement CEN201C5
execmgr 2014/07/23 04:50:19 PM 824 (0x0338)
Creating mandatory request for advert CEN201C5, program FEP Service Policy, package CEN00021
execmgr 2014/07/23 04:50:19 PM 824 (0x0338)
Policy arrived for child program Per-system unattended execmgr
2014/07/23 04:50:19 PM 1496 (0x05D8)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistWaitingContentEvent
AdvertisementId = "CEN201C5";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723145019.280000+000";
MachineName = "K41PHETOM";
PackageName = "CEN00021";
PackageVersion = "5";
ProcessID = 8784;
ProgramName = "FEP Service Policy";
SiteCode = "P02";
ThreadID = 824;
execmgr 2014/07/23 04:50:19 PM 824 (0x0338)
Successfully raised SoftDistWaitingContentEvent event for program FEP Service Policy
execmgr 2014/07/23 04:50:19 PM 824 (0x0338)
Execution Request for package CEN00021 program FEP Service Policy state change from WaitingDependency to WaitingContent
execmgr 2014/07/23 04:50:19 PM 824 (0x0338)
Policy arrived for parent package CEN00021 program Transnet-Server-Application Member Servers
execmgr 2014/07/23 04:50:19 PM 1496 (0x05D8)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramOfferReceivedEvent
AdvertisementId = "CEN203EA";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723145019.359000+000";
MachineName = "K41PHETOM";
ProcessID = 8784;
SiteCode = "P02";
ThreadID = 1496;
execmgr 2014/07/23 04:50:19 PM 1496 (0x05D8)
Requesting content from CAS for package CEN00021 version 5 execmgr
2014/07/23 04:50:19 PM 6396 (0x18FC)
Successfully created a content request handle {0C92BCED-5C77-442D-BFE8-4D635527E9BE} for the package CEN00021 version 5
execmgr 2014/07/23 04:50:19 PM 6396 (0x18FC)
Program FEP Service Policy change to state STATE_ADVANCED_DOWNLOAD content in progress
execmgr 2014/07/23 04:50:19 PM 6396 (0x18FC)
Execution Request for package CEN00021 program FEP Service Policy state change from NotExist to AdvancedDownload
execmgr 2014/07/23 04:50:19 PM 6396 (0x18FC)
Mandatory execution requested for program FEP Service Policy and advertisement CEN201C6
execmgr 2014/07/23 04:50:19 PM 824 (0x0338)
Creating mandatory request for advert CEN201C6, program FEP Service Policy, package CEN00021
execmgr 2014/07/23 04:50:19 PM 824 (0x0338)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistWaitingContentEvent
AdvertisementId = "CEN201C6";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723145019.539000+000";
MachineName = "K41PHETOM";
PackageName = "CEN00021";
PackageVersion = "5";
ProcessID = 8784;
ProgramName = "FEP Service Policy";
SiteCode = "P02";
ThreadID = 824;
execmgr 2014/07/23 04:50:19 PM 824 (0x0338)
Successfully raised SoftDistWaitingContentEvent event for program FEP Service Policy
execmgr 2014/07/23 04:50:19 PM 824 (0x0338)
Execution Request for package CEN00021 program FEP Service Policy state change from WaitingDependency to WaitingContent
execmgr 2014/07/23 04:50:19 PM 824 (0x0338)
Requesting content from CAS for package CEN00021 version 5 execmgr
2014/07/23 04:50:19 PM 6396 (0x18FC)
Successfully created a content request handle {A1F76ABA-57F5-423D-93E0-2421D07EF195} for the package CEN00021 version 5
execmgr 2014/07/23 04:50:19 PM 6396 (0x18FC)
Program Transnet-Server-Application Member Servers change to state STATE_ADVANCED_DOWNLOAD content in progress
execmgr 2014/07/23 04:50:19 PM 6396 (0x18FC)
Execution Request for package CEN00021 program Transnet-Server-Application Member Servers state change from NotExist to AdvancedDownload
execmgr 2014/07/23 04:50:19 PM 6396 (0x18FC)
Mandatory execution requested for program Transnet-Server-Application Member Servers and advertisement CEN203EA
execmgr 2014/07/23 04:50:19 PM 10120 (0x2788)
Creating mandatory request for advert CEN203EA, program Transnet-Server-Application Member Servers, package CEN00021
execmgr 2014/07/23 04:50:19 PM 10120 (0x2788)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistWaitingContentEvent
AdvertisementId = "CEN203EA";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723145019.757000+000";
MachineName = "K41PHETOM";
PackageName = "CEN00021";
PackageVersion = "5";
ProcessID = 8784;
ProgramName = "Transnet-Server-Application Member Servers";
SiteCode = "P02";
ThreadID = 10120;
execmgr 2014/07/23 04:50:19 PM 10120 (0x2788)
Successfully raised SoftDistWaitingContentEvent event for program Transnet-Server-Application Member Servers
execmgr 2014/07/23 04:50:19 PM 10120 (0x2788)
Execution Request for package CEN00021 program Transnet-Server-Application Member Servers state change from WaitingDependency to WaitingContent
execmgr 2014/07/23 04:50:19 PM 10120 (0x2788)
CExecutionManager::Execution Manager received a SERVICEWINDOWEVENT START Event
execmgr 2014/07/23 04:53:13 PM 7504 (0x1D50)
CExecutionRequestManager::Received a Service Window Start Notification.
execmgr 2014/07/23 04:53:13 PM 7504 (0x1D50)
Policy arrived for child program Per-system unattended execmgr
2014/07/23 04:53:13 PM 5824 (0x16C0)
Policy arrived for child program Per-system uninstall execmgr
2014/07/23 04:54:34 PM 7252 (0x1C54)
Policy arrived for child program Per-system unattended execmgr
2014/07/23 04:54:35 PM 7252 (0x1C54)
Policy arrived for child program Per-system uninstall execmgr
2014/07/23 04:54:35 PM 7252 (0x1C54)
Policy arrived for child program Per-system uninstall execmgr
2014/07/23 04:54:35 PM 7252 (0x1C54)
Policy arrived for child program Per-system unattended execmgr
2014/07/23 04:54:35 PM 7252 (0x1C54)
Policy arrived for child program Per-system uninstall execmgr
2014/07/23 04:54:35 PM 7252 (0x1C54)
Content is available for program Transnet-Workstation-Policy. execmgr
2014/07/23 05:13:35 PM 4104 (0x1008)
CExecutionRequest::Overriding Service Windows as per policy. execmgr
2014/07/23 05:13:35 PM 4104 (0x1008)
Execution Manager timer has been fired. execmgr 2014/07/23 05:13:35 PM
8772 (0x2244)
Executing program cscript.exe "ApplyPolicy.vbs" in Admin context
execmgr 2014/07/23 05:13:35 PM 4104 (0x1008)
Execution Request for package CEN00021 program Transnet-Workstation-Policy state change from WaitingContent to NotifyExecution
execmgr 2014/07/23 05:13:36 PM 4104 (0x1008)
Checking content location C:\Windows\SysWOW64\CCM\Cache\CEN00021.5.System for use
execmgr 2014/07/23 05:13:36 PM 4104 (0x1008)
Successfully selected content location C:\Windows\SysWOW64\CCM\Cache\CEN00021.5.System
execmgr 2014/07/23 05:13:36 PM 4104 (0x1008)
GetFileVersionInfoSize failed for file C:\Windows\SysWOW64\CCM\Cache\CEN00021.5.System\cscript.exe, error 2
execmgr 2014/07/23 05:13:36 PM 4104 (0x1008)
Executing program as a script execmgr 2014/07/23 05:13:36 PM
4104 (0x1008)
Found executable file cscript.exe with complete path C:\Windows\system32\cscript.exe
execmgr 2014/07/23 05:13:36 PM 4104 (0x1008)
Successfully prepared command line "C:\Windows\system32\cscript.exe" "ApplyPolicy.vbs"
execmgr 2014/07/23 05:13:36 PM 4104 (0x1008)
Command line = "C:\Windows\system32\cscript.exe" "ApplyPolicy.vbs", Working Directory = C:\Windows\SysWOW64\CCM\Cache\CEN00021.5.System\
execmgr 2014/07/23 05:13:36 PM 4104 (0x1008)
Created Process for the passed command line execmgr
2014/07/23 05:13:36 PM 4104 (0x1008)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "CEN202AF";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
CommandLine = "\"C:\\Windows\\system32\\cscript.exe\" \"ApplyPolicy.vbs\"";
DateTime = "20140723151336.038000+000";
MachineName = "K41PHETOM";
PackageName = "CEN00021";
ProcessID = 8784;
ProgramName = "Transnet-Workstation-Policy";
SiteCode = "P02";
ThreadID = 4104;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\Windows\\SysWOW64\\CCM\\Cache\\CEN00021.5.System\\";
execmgr 2014/07/23 05:13:36 PM 4104 (0x1008)
Raised Program Started Event for Ad:CEN202AF, Package:CEN00021, Program: Transnet-Workstation-Policy
execmgr 2014/07/23 05:13:36 PM 4104 (0x1008)
Content is available for program FEP Service Policy. execmgr
2014/07/23 05:13:36 PM 4104 (0x1008)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramWaitingForAnotherProgram
AdvertisementId = "CEN201C5";
BlockingPackageID = "CEN00021";
BlockingProgramName = "Transnet-Workstation-Policy";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723151336.187000+000";
MachineName = "K41PHETOM";
PackageName = "CEN00021";
ProcessID = 8784;
ProgramName = "FEP Service Policy";
SiteCode = "P02";
ThreadID = 4104;
execmgr 2014/07/23 05:13:36 PM 4104 (0x1008)
Successfully raised SoftDistProgramWaitingForAnotherProgram event for program FEP Service Policy.
execmgr 2014/07/23 05:13:36 PM 4104 (0x1008)
Execution Request for package CEN00021 program FEP Service Policy state change from WaitingContent to Ready
execmgr 2014/07/23 05:13:36 PM 4104 (0x1008)
Content is available for program FEP Service Policy. execmgr
2014/07/23 05:13:36 PM 4104 (0x1008)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramWaitingForAnotherProgram
AdvertisementId = "CEN201C6";
BlockingPackageID = "CEN00021";
BlockingProgramName = "Transnet-Workstation-Policy";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723151336.460000+000";
MachineName = "K41PHETOM";
PackageName = "CEN00021";
ProcessID = 8784;
ProgramName = "FEP Service Policy";
SiteCode = "P02";
ThreadID = 4104;
execmgr 2014/07/23 05:13:36 PM 4104 (0x1008)
Successfully raised SoftDistProgramWaitingForAnotherProgram event for program FEP Service Policy.
execmgr 2014/07/23 05:13:36 PM 4104 (0x1008)
Execution Request for package CEN00021 program FEP Service Policy state change from WaitingContent to Ready
execmgr 2014/07/23 05:13:36 PM 4104 (0x1008)
Content is available for program Transnet-Server-Application Member Servers.
execmgr 2014/07/23 05:13:36 PM 4104 (0x1008)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramWaitingForAnotherProgram
AdvertisementId = "CEN203EA";
BlockingPackageID = "CEN00021";
BlockingProgramName = "Transnet-Workstation-Policy";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723151336.500000+000";
MachineName = "K41PHETOM";
PackageName = "CEN00021";
ProcessID = 8784;
ProgramName = "Transnet-Server-Application Member Servers";
SiteCode = "P02";
ThreadID = 4104;
execmgr 2014/07/23 05:13:36 PM 4104 (0x1008)
Successfully raised SoftDistProgramWaitingForAnotherProgram event for program Transnet-Server-Application Member Servers.
execmgr 2014/07/23 05:13:36 PM 4104 (0x1008)
Execution Request for package CEN00021 program Transnet-Server-Application Member Servers state change from WaitingContent to Ready
execmgr 2014/07/23 05:13:36 PM 4104 (0x1008)
Program exit code 259 execmgr 2014/07/23 05:23:36 PM
5544 (0x15A8)
Looking for MIF file to get program status execmgr 2014/07/23 05:23:36 PM
5544 (0x15A8)
Program ran past its maximum runtime. It will be orphaned execmgr
2014/07/23 05:23:36 PM 5544 (0x15A8)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramExceededTime
AdvertisementId = "CEN202AF";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723152336.038000+000";
MachineName = "K41PHETOM";
MaximumTime = "10";
PackageName = "CEN00021";
ProcessID = 8784;
ProgramName = "Transnet-Workstation-Policy";
SiteCode = "P02";
ThreadID = 5544;
execmgr 2014/07/23 05:23:36 PM 5544 (0x15A8)
Raised Program Exceeded Time Event for Ad:CEN202AF, Package:CEN00021, Program: Transnet-Workstation-Policy
execmgr 2014/07/23 05:23:36 PM 5544 (0x15A8)
Execution is complete for program Transnet-Workstation-Policy. The exit code is 259, the execution status is Unknown Status
execmgr 2014/07/23 05:23:36 PM 7188 (0x1C14)
CExecutionRequest::Overriding Service Windows as per policy. execmgr
2014/07/23 05:23:36 PM 7188 (0x1C14)
Execution Manager timer has been fired. execmgr 2014/07/23 05:23:36 PM
5544 (0x15A8)
Executing program cscript.exe "ApplyPolicy.vbs" in Admin context
execmgr 2014/07/23 05:23:36 PM 7188 (0x1C14)
Execution Request for package CEN00021 program FEP Service Policy state change from Ready to NotifyExecution
execmgr 2014/07/23 05:23:36 PM 7188 (0x1C14)
Checking content location C:\Windows\SysWOW64\CCM\Cache\CEN00021.5.System for use
execmgr 2014/07/23 05:23:36 PM 7188 (0x1C14)
Successfully selected content location C:\Windows\SysWOW64\CCM\Cache\CEN00021.5.System
execmgr 2014/07/23 05:23:36 PM 7188 (0x1C14)
GetFileVersionInfoSize failed for file C:\Windows\SysWOW64\CCM\Cache\CEN00021.5.System\cscript.exe, error 2
execmgr 2014/07/23 05:23:36 PM 7188 (0x1C14)
Executing program as a script execmgr 2014/07/23 05:23:36 PM
7188 (0x1C14)
Found executable file cscript.exe with complete path C:\Windows\system32\cscript.exe
execmgr 2014/07/23 05:23:36 PM 7188 (0x1C14)
Successfully prepared command line "C:\Windows\system32\cscript.exe" "ApplyPolicy.vbs"
execmgr 2014/07/23 05:23:36 PM 7188 (0x1C14)
Command line = "C:\Windows\system32\cscript.exe" "ApplyPolicy.vbs", Working Directory = C:\Windows\SysWOW64\CCM\Cache\CEN00021.5.System\
execmgr 2014/07/23 05:23:36 PM 7188 (0x1C14)
Created Process for the passed command line execmgr
2014/07/23 05:23:36 PM 7188 (0x1C14)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramStartedEvent
, Program: Install execmgr 2014/07/24 08:17:07 AM
9960 (0x26E8)
Execution is complete for program Install. The exit code is -2147023271, the execution status is FailureNonRetry
execmgr 2014/07/24 08:17:07 AM 9092 (0x2384)
CcmExec 2014/07/24 08:18:20 AM 6124 (0x17EC)AdvertisementId = "CEN201C5";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
CommandLine = "\"C:\\Windows\\system32\\cscript.exe\" \"ApplyPolicy.vbs\"";
DateTime = "20140723152336.169000+000";
MachineName = "K41PHETOM";
PackageName = "CEN00021";
ProcessID = 8784;
ProgramName = "FEP Service Policy";
SiteCode = "P02";
ThreadID = 7188;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\Windows\\SysWOW64\\CCM\\Cache\\CEN00021.5.System\\";
execmgr 2014/07/23 05:23:36 PM 7188 (0x1C14)
Raised Program Started Event for Ad:CEN201C5, Package:CEN00021, Program: FEP Service Policy execmgr 2014/07/23 05:23:36 PM 7188 (0x1C14)
Content is available for program KB977384 - Advanced Client Patch Install. execmgr 2014/07/23 05:26:11 PM 4952 (0x1358)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramWaitingForAnotherProgram
AdvertisementId = "CEN20067";
BlockingPackageID = "CEN00021";
BlockingProgramName = "FEP Service Policy";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723152611.559000+000";
MachineName = "K41PHETOM";
PackageName = "CEN00003";
ProcessID = 8784;
ProgramName = "KB977384 - Advanced Client Patch Install";
SiteCode = "P02";
ThreadID = 4952;
execmgr 2014/07/23 05:26:11 PM 4952 (0x1358)
Successfully raised SoftDistProgramWaitingForAnotherProgram event for program KB977384 - Advanced Client Patch Install. execmgr 2014/07/23 05:26:11 PM 4952 (0x1358)
Execution Request for package CEN00003 program KB977384 - Advanced Client Patch Install state change from WaitingContent to Ready execmgr 2014/07/23 05:26:11 PM 4952 (0x1358)
Program exit code 259 execmgr 2014/07/23 05:33:36 PM 8756 (0x2234)
Looking for MIF file to get program status execmgr 2014/07/23 05:33:36 PM 8756 (0x2234)
Program ran past its maximum runtime. It will be orphaned execmgr 2014/07/23 05:33:36 PM 8756 (0x2234)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramExceededTime
AdvertisementId = "CEN201C5";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723153336.170000+000";
MachineName = "K41PHETOM";
MaximumTime = "10";
PackageName = "CEN00021";
ProcessID = 8784;
ProgramName = "FEP Service Policy";
SiteCode = "P02";
ThreadID = 8756;
execmgr 2014/07/23 05:33:36 PM 8756 (0x2234)
Raised Program Exceeded Time Event for Ad:CEN201C5, Package:CEN00021, Program: FEP Service Policy execmgr 2014/07/23 05:33:36 PM 8756 (0x2234)
Execution is complete for program FEP Service Policy. The exit code is 259, the execution status is Unknown Status execmgr 2014/07/23 05:33:36 PM 7664 (0x1DF0)
CExecutionRequest::Overriding Service Windows as per policy. execmgr 2014/07/23 05:33:36 PM 7664 (0x1DF0)
Execution Manager timer has been fired. execmgr 2014/07/23 05:33:36 PM 8008 (0x1F48)
Executing program msiexec.exe /p sccm2007ac-sp2-kb977384-x86-enu.msp /L*v %TEMP%\sccm2007ac-sp2-kb977384-x86-enu.msp.LOG /q REINSTALL=ALL REINSTALLMODE=mous in Admin context execmgr 2014/07/23
05:33:36 PM 7664 (0x1DF0)
Execution Request for package CEN00003 program KB977384 - Advanced Client Patch Install state change from Ready to NotifyExecution execmgr 2014/07/23 05:33:36 PM 7664 (0x1DF0)
Checking content location C:\Windows\SysWOW64\CCM\Cache\CEN00003.2.System for use execmgr 2014/07/23 05:33:36 PM 7664 (0x1DF0)
Successfully selected content location C:\Windows\SysWOW64\CCM\Cache\CEN00003.2.System execmgr 2014/07/23 05:33:36 PM 7664 (0x1DF0)
GetFileVersionInfoSize failed for file C:\Windows\SysWOW64\CCM\Cache\CEN00003.2.System\msiexec.exe, error 2 execmgr 2014/07/23 05:33:36 PM 7664 (0x1DF0)
Executing program as a script execmgr 2014/07/23 05:33:36 PM 7664 (0x1DF0)
Found executable file msiexec.exe with complete path C:\Windows\system32\msiexec.exe execmgr 2014/07/23 05:33:36 PM 7664 (0x1DF0)
Successfully prepared command line "C:\Windows\system32\msiexec.exe" /p sccm2007ac-sp2-kb977384-x86-enu.msp /L*v C:\Windows\TEMP\sccm2007ac-sp2-kb977384-x86-enu.msp.LOG /q REINSTALL=ALL REINSTALLMODE=mous
execmgr 2014/07/23 05:33:36 PM 7664 (0x1DF0)
Command line = "C:\Windows\system32\msiexec.exe" /p sccm2007ac-sp2-kb977384-x86-enu.msp /L*v C:\Windows\TEMP\sccm2007ac-sp2-kb977384-x86-enu.msp.LOG /q REINSTALL=ALL REINSTALLMODE=mous, Working
Directory = C:\Windows\SysWOW64\CCM\Cache\CEN00003.2.System\ execmgr 2014/07/23 05:33:36 PM 7664 (0x1DF0)
Created Process for the passed command line execmgr 2014/07/23 05:33:36 PM 7664 (0x1DF0)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "CEN20067";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
CommandLine = "\"C:\\Windows\\system32\\msiexec.exe\" /p sccm2007ac-sp2-kb977384-x86-enu.msp /L*v C:\\Windows\\TEMP\\sccm2007ac-sp2-kb977384-x86-enu.msp.LOG /q REINSTALL=ALL REINSTALLMODE=mous";
DateTime = "20140723153336.370000+000";
MachineName = "K41PHETOM";
PackageName = "CEN00003";
ProcessID = 8784;
ProgramName = "KB977384 - Advanced Client Patch Install";
SiteCode = "P02";
ThreadID = 7664;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\Windows\\SysWOW64\\CCM\\Cache\\CEN00003.2.System\\";
execmgr 2014/07/23 05:33:36 PM 7664 (0x1DF0)
Raised Program Started Event for Ad:CEN20067, Package:CEN00003, Program: KB977384 - Advanced Client Patch Install execmgr 2014/07/23 05:33:36 PM 7664 (0x1DF0)
CExecutionManager::Execution Manager received a SERVICEWINDOWEVENT END Event execmgr 2014/07/23 05:33:37 PM 8684 (0x21EC)
CExecutionRequestManager::Received a Service Window Notification that it need not handle. execmgr 2014/07/23 05:33:37 PM 8684 (0x21EC)
Request in running or report status found for program KB977384 - Advanced Client Patch Install package CEN00003 execmgr 2014/07/23 05:35:58 PM 2188 (0x088C)
Service stopped while program KB977384 - Advanced Client Patch Install is running execmgr 2014/07/23 05:35:58 PM 2188 (0x088C)
OpenProcess failed for process 3200, error 80070057 execmgr 2014/07/23 05:35:58 PM 2188 (0x088C)
Can not continue monitoring the program after service restart because the process exited. Assume failed execmgr 2014/07/23 05:35:58 PM 2188 (0x088C)
Looking for MIF file to get program status execmgr 2014/07/23 05:35:58 PM 2188 (0x088C)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramUnexpectedRebootEvent
AdvertisementId = "CEN20067";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723153558.350000+000";
MachineName = "K41PHETOM";
PackageName = "CEN00003";
ProcessID = 10076;
ProgramName = "KB977384 - Advanced Client Patch Install";
SiteCode = "P02";
ThreadID = 2188;
execmgr 2014/07/23 05:35:58 PM 2188 (0x088C)
Raised Program Unexpected Reboot Event for Ad:CEN20067, Package:CEN00003, Program: KB977384 - Advanced Client Patch Install execmgr 2014/07/23 05:35:58 PM 2188 (0x088C)
Execution Request for package CEN00022 program Install state change from WaitingContent to WaitingContent execmgr 2014/07/23 05:35:58 PM 2188 (0x088C)
CExecutionRequest::Overriding Service Windows as per policy. execmgr 2014/07/23 05:35:58 PM 2188 (0x088C)
Execution Manager timer has been fired. execmgr 2014/07/23 05:35:58 PM 8684 (0x21EC)
Executing program cscript.exe "ApplyPolicy.vbs" in Admin context execmgr 2014/07/23 05:35:58 PM 2188 (0x088C)
Execution Request for package CEN00021 program Transnet-Server-Application Member Servers state change from Ready to NotifyExecution execmgr 2014/07/23 05:35:58 PM 2188 (0x088C)
Checking content location C:\Windows\SysWOW64\CCM\Cache\CEN00021.5.System for use execmgr 2014/07/23 05:35:58 PM 2188 (0x088C)
Successfully selected content location C:\Windows\SysWOW64\CCM\Cache\CEN00021.5.System execmgr 2014/07/23 05:35:58 PM 2188 (0x088C)
GetFileVersionInfoSize failed for file C:\Windows\SysWOW64\CCM\Cache\CEN00021.5.System\cscript.exe, error 2 execmgr 2014/07/23 05:35:58 PM 2188 (0x088C)
Executing program as a script execmgr 2014/07/23 05:35:58 PM 2188 (0x088C)
Found executable file cscript.exe with complete path C:\Windows\system32\cscript.exe execmgr 2014/07/23 05:35:58 PM 2188 (0x088C)
Successfully prepared command line "C:\Windows\system32\cscript.exe" "ApplyPolicy.vbs" execmgr 2014/07/23 05:35:58 PM 2188 (0x088C)
Command line = "C:\Windows\system32\cscript.exe" "ApplyPolicy.vbs", Working Directory = C:\Windows\SysWOW64\CCM\Cache\CEN00021.5.System\ execmgr 2014/07/23 05:35:58 PM 2188 (0x088C)
Created Process for the passed command line execmgr 2014/07/23 05:35:58 PM 2188 (0x088C)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "CEN203EA";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
CommandLine = "\"C:\\Windows\\system32\\cscript.exe\" \"ApplyPolicy.vbs\"";
DateTime = "20140723153558.655000+000";
MachineName = "K41PHETOM";
PackageName = "CEN00021";
ProcessID = 10076;
ProgramName = "Transnet-Server-Application Member Servers";
SiteCode = "P02";
ThreadID = 2188;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\Windows\\SysWOW64\\CCM\\Cache\\CEN00021.5.System\\";
execmgr 2014/07/23 05:35:58 PM 2188 (0x088C)
Raised Program Started Event for Ad:CEN203EA, Package:CEN00021, Program: Transnet-Server-Application Member Servers execmgr 2014/07/23 05:35:58 PM 2188 (0x088C)
Program exit code 0 execmgr 2014/07/23 05:38:10 PM 7664 (0x1DF0)
Looking for MIF file to get program status execmgr 2014/07/23 05:38:10 PM 7664 (0x1DF0)
A Matching MIF file FepPolicy.mif was found execmgr 2014/07/23 05:38:10 PM 7664 (0x1DF0)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramCompletedSuccessfulMIFEvent
AdvertisementId = "CEN203EA";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723153810.057000+000";
MachineName = "K41PHETOM";
MIFDescription = "FEP successfully applied the following policy to the FEP client. Policy: Transnet-Server-Application Member Servers, Policy path: C:\\Windows\\SysWOW64\\CCM\\Cache\\CEN00021.5.System\\Transnet-Server-Application
Member Servers.xml";
MIFDescription7 = "";
MIFDescription8 = "";
MIFDescription9 = "";
PackageName = "CEN00021";
ProcessID = 10076;
ProgramName = "Transnet-Server-Application Member Servers";
SiteCode = "P02";
ThreadID = 7664;
UserContext = "NT AUTHORITY\\SYSTEM";
execmgr 2014/07/23 05:38:10 PM 7664 (0x1DF0)
Raised Program MIF Success Event for Ad:CEN203EA, Package:CEN00021, Program: Transnet-Server-Application Member Servers execmgr 2014/07/23 05:38:10 PM 7664 (0x1DF0)
Execution is complete for program Transnet-Server-Application Member Servers. The exit code is 0, the execution status is Success execmgr 2014/07/23 05:38:10 PM 5108 (0x13F4)
CExecutionRequest::Overriding Service Windows as per policy. execmgr 2014/07/23 05:38:10 PM 5108 (0x13F4)
Execution Manager timer has been fired. execmgr 2014/07/23 05:38:10 PM 6500 (0x1964)
Executing program cscript.exe "ApplyPolicy.vbs" in Admin context execmgr 2014/07/23 05:38:10 PM 5108 (0x13F4)
Execution Request for package CEN00021 program FEP Service Policy state change from Ready to NotifyExecution execmgr 2014/07/23 05:38:10 PM 5108 (0x13F4)
Checking content location C:\Windows\SysWOW64\CCM\Cache\CEN00021.5.System for use execmgr 2014/07/23 05:38:10 PM 5108 (0x13F4)
Successfully selected content location C:\Windows\SysWOW64\CCM\Cache\CEN00021.5.System execmgr 2014/07/23 05:38:10 PM 5108 (0x13F4)
GetFileVersionInfoSize failed for file C:\Windows\SysWOW64\CCM\Cache\CEN00021.5.System\cscript.exe, error 2 execmgr 2014/07/23 05:38:10 PM 5108 (0x13F4)
Executing program as a script execmgr 2014/07/23 05:38:10 PM 5108 (0x13F4)
Found executable file cscript.exe with complete path C:\Windows\system32\cscript.exe execmgr 2014/07/23 05:38:10 PM 5108 (0x13F4)
Successfully prepared command line "C:\Windows\system32\cscript.exe" "ApplyPolicy.vbs" execmgr 2014/07/23 05:38:10 PM 5108 (0x13F4)
Command line = "C:\Windows\system32\cscript.exe" "ApplyPolicy.vbs", Working Directory = C:\Windows\SysWOW64\CCM\Cache\CEN00021.5.System\ execmgr 2014/07/23 05:38:10 PM 5108 (0x13F4)
Created Process for the passed command line execmgr 2014/07/23 05:38:10 PM 5108 (0x13F4)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "CEN201C6";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
CommandLine = "\"C:\\Windows\\system32\\cscript.exe\" \"ApplyPolicy.vbs\"";
DateTime = "20140723153810.198000+000";
MachineName = "K41PHETOM";
PackageName = "CEN00021";
ProcessID = 10076;
ProgramName = "FEP Service Policy";
SiteCode = "P02";
ThreadID = 5108;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\Windows\\SysWOW64\\CCM\\Cache\\CEN00021.5.System\\";
execmgr 2014/07/23 05:38:10 PM 5108 (0x13F4)
Raised Program Started Event for Ad:CEN201C6, Package:CEN00021, Program: FEP Service Policy execmgr 2014/07/23 05:38:10 PM 5108 (0x13F4)
Program exit code 0 execmgr 2014/07/23 05:38:11 PM 6500 (0x1964)
Looking for MIF file to get program status execmgr 2014/07/23 05:38:11 PM 6500 (0x1964)
A Matching MIF file FepPolicy.mif was found execmgr 2014/07/23 05:38:11 PM 6500 (0x1964)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(7177)]
instance of SoftDistProgramCompletedSuccessfulMIFEvent
AdvertisementId = "CEN201C6";
ClientID = "GUID:F3A2AFAD-EDFC-4D32-B2AA-1FE11988BF56";
DateTime = "20140723153811.029000+000";
MachineName = "K41PHETOM";
MIFDescription = "FEP successfully applied the following policy to the FEP client. Policy: Transnet-Server-Application Member Servers, Policy path: C:\\Windows\\SysWOW64\\CCM\\Cache\\CEN00021.5.System\\Transnet-Server-Application
Member Servers.xml";
MIFDescription7 = "";
MIFDescription8 = "";
MIFDescription9 = "";
PackageName = "CEN00021";
ProcessID = 10076;
ProgramName = "FEP Service Policy";
SiteCode = "P02";
ThreadID = 6500;
UserContext = "NT AUTHORITY\\SYSTEM";
ThreadID = 9960;
UserContext = "NT AUTHORITY\\SYSTEM";
execmgr 2014/07/24 08:17:07 AM 9960 (0x26E8)
Raised Program MIF Error Event for Ad:CEN20030, Package:CEN00022 -
RRM RF Group Leader not updating RF Group Members
We cannot get RRM RF Group Leader to update the RF Group Members. On our group leader controller, it sees our other controllers in the RF group. We have APs assigned to all four of our controllers and the tx power and dynamic channel assignment do not work. When we put all of the APs onto the RF group leader controller, the tx power levels and dynamic channel assignment both work as they are supposed to. All of our settings on our controllers are exactly the same. I guess my question is, is there a set of specific settings that I need to apply before RRM starts to update from the RF group leader?
We have all four of our controllers on the same RF Domain Name. We have verified the status of the Mobility Group using eping and mping. We split up our APs on two of our controllers that are in the same 6500 and it still would not update from the RRM Group Leader. We "tricked" the WLC into moving the group leader onto the other controller that was in the same 6500. The same thing happened, now the 2nd controller won't send updates to the original controller. We moved all the APs onto the group leader and everything worked fine.
-
iPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers? I downloaded old version of Numbers 2.0.1 from DVD but with both versions the 2.0.1 will not open. So both versions are present but only the new version functions. I tried to drag the new version to the trash but the old version still runs error message and will not open. I did not try to restart with the new version in the trash.
Maybe. See:
Reverting to previous version of Numbers -
IPod will not update in iTunes with Windows Vista
Every time I connect my ipod to my computer, my computer locks up and it does not update. The only way I can even connect my ipod is to use manual update.
iTunes does not yet support Windows Vista. There are numerous problems running iTunes on it. The latest release of iTuens 7.1 fixed some of them but not all.
-
Previews in Adobe Bridge in Essentials View do not update after manipulation in Adobe Camera Raw
When I open a RAW file in Bridge and manipulate it in ACR, the preview is not updated in Bridge Essentials View. The only way I can get it to update the preview is to open the file in "Preview" view, then it updates and looks fine in Essentials view.
Is Bridge set up to store the ACR modifications to those XMP files? Only then it can update the preview right after working on it. Else you need to refresh the preview cache.
-
Can not update request in data target
Hi,
We have a process chain for master data (10 parallel) loads. One of the load
failed with error "can not update request REQU_46xxxxxxxxxxxxxx in data target".
When I checked the InfoPackage
(a) update: full load
(b) it has data selection
(c) processing :PSA and then to data targets
(d) Data targets: update in all data targets for which active rules exist.
But I do not see any list of data targets here.
Can some one please suggest me how do I correct this load failure.
ThanksHi Wondewossen, NS and Nagesh,
Thanks for the information. I am in support, and the developer is
not here now.
I have checked Header tab in the monitor, in this there
is a update symbol and infosource name and an -->
but after arrow there is nothing.
when I click on this I get a message
"No active update rules exist".
Can you please advice me how to I correct this.
Thanks -
I export part of my master catalog to a laptop. I include the image files so I can edit the files at full res. After managing and editing files I import the catalog back into the master catalog. When importing I check to replace metadata, develop settings and negative files. I have been running some tests to be sure all my work is being captured in the master catalog by this process. I find that if I change develop settings or photo ratings this is detected when the file is imported and the data in the master catalog is updated properly. The surprise is that if I delete files or move files among folders in the exported catalog these changes are not detected and these changes are not updated inthe master catalog. It seems bizarre to me that such changes are not detected but I do not see how to get LR to recognize these changes and include them in the catalog update. Without this capability I don't see how to use catalogs to move part of a catalog to another computer for edits and file management and then move back to the master catalog.
There are various reasons why Lightroom works this way, but you'll need use pick flags to indicate photos to be deleted, and other metadata like colours or collections.
-
Can not update tab if its not the default sub-tab.
Can not update tab if its not the default sub-tab.
JDeveloper Version 10.1.2.1.0 (Build 1913)
Hi. I have a problem with a lovOpenWindowAction
The UIX is created with a master UIX and have several sub-tab that is included as UIX-pages.
The lovOpenWindowAction lies in the included UIX-page
The sub-tab I have a problem with has a table with users. Then I have a Create New button than I want to click on and select a new user that should be included in the table in the sub-tab.
When I click on the button I open a LOV-window. Here I select the user that I want to add.
In the LOV Action-class I save my new value in the database. Then in the method onLovUpdate I update the iterator with the new values from the database.
But in my GUI the subtab is not updated until I click on it.
But if I make the subtab the default subtab then it all works just fine and the GUI is updated directly.
Here is the code for the tableAction in the subtab. This code lies in an included UIX-page. Target is the table id.
<tableActions>
<button text="Create New" id=" createNewRollperson" accessKey="N">
<primaryClientAction>
<lovOpenWindowAction destination="FiskeRollpersonerLOV.do"
source=" createNewRollperson "
targets="joinedRollpersfiskeer message"/>
</primaryClientAction>
</button>
</tableActions>
Here is some code from the master UIX-page
<subTabLayout id="flikar">
<subTabs>
<subTabBar selectedIndex="${ui:defaulting(param.index,0)}">
<contents>
<link id="resorFlik" text="Resor"
disabled="${sessionScope.fiske.id == null}"
selected="${(param.source == 'resorFlik') or empty param.source}">
<primaryClientAction>
<firePartialAction event="changeTab" targets="flikar globalHeader">
<parameters>
<parameter key="source" value="resorFlik"/>
</parameters>
</firePartialAction>
</primaryClientAction>
</link>
<link id="rollpersonerFlik" text="Rollpersoner"
disabled="${sessionScope.fiske.id == null}"
selected="${param.source == 'rollpersonerFlik'}">
<primaryClientAction>
<firePartialAction event="changeTab" targets="flikar globalHeader">
<parameters>
<parameter key="source" value="rollpersonerFlik"/>
</parameters>
</firePartialAction>
</primaryClientAction>
</link>
</contents>
</subTabBar>
</subTabs>
<contents>
<switcher childName="${param.source}"
defaultCase=ResorFlik">
<case name="resorFlik">
<include node="${ctrl:parsePage(uix, 'includes/ResorFlik')}"/>
</case>
<case name="rollpersonerFlik">
<include node="${ctrl:parsePage(uix, 'includes/FiskeRollpersonerFlik')}"/>
</case>
</switcher>
</contents>
</subTabLayout>
What am I missing?? I cant have this subtab as the default subtab! Please help me with a solution!hi,
Change the condition type to manual entry.
or
for example delivery costs will be different at the time of PO and actual delivery costs then at the time of invoice we select planned delivery costs and settle them first with the actual delivery cost.
Thanks & Regards,
Kiran -
i have modify the data STREET to "ANG MO KIO"
http://i192.photobucket.com/albums/z231/yzme/d1.gif
but the data in server still "HEAVEN ST"
http://i192.photobucket.com/albums/z231/yzme/d2.gif
I am using Time2Way T01, if it is when i sync the data will be uploaded, or do i need to configure somewhere to get the data upload ?
if the data in client and middleware is different, when i sync , the data from the middleware will again download to the client replace the modified values
OR
the data in the client will uploaded to the middleware and trigger the MODIFY bapi wrappers ?
<b>
when i check my MEREP_MON, and MEREP_LOG there is no data inside this meaning after i changed the values and perform the sync, Inbox and Outbox still remain the previous data as well as inside the MEREP_LOG,
is it the bapi wrapper not call by the client ?
</b>
and i find out that my bapi not get called, what additional code should i add instead of the code below.
DO I NEED TO IMPLEMENT SOME CODE FOR UPLOADER ??
do i have to change the reqDirectSync="true", if yes, how do i changed, just change inside the editor, or there is somewhere to configure in sapgui
after i changed the data , i try to sync, and i check on merep_mon
what specific or additional steps i need to configure, on uploader / receiver or synchronizer
<b>i do not implement any syncBoDelta or global reset ?</b>Can someone explain the term "delta" to me and its activities?
if i have upload something, and sync, the Inbox should have something right ??
i just put add this code to modify my records
public String modifyRecord(String eventName,boolean didNavigate){
String syncBoName="ZCON";
String syncKey="0001230297";
tableViewBean.setString(syncBoName +" "+syncKey);
System.out.println("SyncBoName: " +syncBoName + " syncKey: " +syncKey);
tcp = TableContentProvider.instance(syncBoName);
tcp.modifyTable(syncBoName,syncKey); return JSP_DETAIL_SYNCBOINSTANCE;
public void modifyRecord(String syncBoName,String syncKey){
SyncBoDescriptor sbd=null;
sbd=descriptorFacade.getSyncBoDescriptor(syncBoName);
SyncBo sb=null;
try{
System.out.println("bp 2");
sb=dataFacade.getSyncBo(sbd,syncKey);
}catch(PersistenceException pex){
System.out.println("Exception in modifyRecordLoc:" +pex.getMessage());
SmartSyncTransactionManager transactionManager;
try{ transactionManager=dataFacade.getSmartSyncTransactionManager();
if(!transactionManager.isTransactionStarted()){
transactionManager.beginTransaction();
boolean b8=false;
b8=setHeaderFieldValue2(sb,"STREET","ANG MO KIO");
transactionManager.commit();
SetSendType();
listAllOutDelta();
checkInboxConflict();
}catch(Exception e){
System.out.println("Exception in modifyRecordAmt2:" +e.getMessage());
public void checkInboxConflict(){
ErrorConflictInbox errorConflictInbox= SmartSyncRuntime.getInstance().getInboxNotifier().getErrorConflictInbox();
MeIterator iter;
SyncBoResponse resp;
try {
iter= errorConflictInbox.getAllSyncBoResponses();
while(iter.hasNext()){
resp= (SyncBoResponse)iter.next();
String bo=resp.getSyncBoDescriptor().getSyncBoName();//SyncBo Name
String state=resp.getSyncBoResponseState().toString();
String res=resp.getResponseType().toString();//Get the SyncBo response type (conflict or ERROR)
String msg=resp.getText();// This will return the exact message from the server
System.out.println("bo:" +bo +" state: " +state +" res: " +res +" msg:" +msg);
System.out.println("state:" +resp.getSyncBoResponseState().toString());
if(resp.getSyncBoResponseState().equals(SyncBoResponseState.INITIAL)){
String a=resp.getSyncBoResponseState().toString();
resp.acceptClientSyncBo();
String b=resp.getSyncBoResponseState().toString();
resp.delete();
System.out.println("state1: " +a +"state2: " +b);
boolean syncStatusComplete= SmartSyncRuntime.getInstance().getInboxNotifier().isSyncStatusComplete();
System.out.println("syncStatus:" +syncStatusComplete);
}catch (Exception e) {
e.printStackTrace();
public void listAllOutDelta(){
SyncBoOutDeltaFacade deltFac=SmartSyncRuntime.getInstance().getSyncBoOutDeltaFacade();
MeIterator allDelta;
try {
allDelta = deltFac.getAllDelta();
while(allDelta.hasNext()){
SyncBoOutDelta outDelta=(SyncBoOutDelta)allDelta.next();
System.out.println("SyncKey:" +outDelta.getSyncKey() +" Action:" +outDelta.getAction()
+" State:" +outDelta.getStateId() +" SendType:"+outDelta.getSendType());
} catch (SmartSyncException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (PersistenceException e) {
// TODO Auto-generated catch block
e.printStackTrace();
public void SetSendType(){
SmartSyncRuntime ssRuntime = SmartSyncRuntime.getInstance();
SyncBoOutDeltaFacade boDeltaFacade = ssRuntime.getSyncBoOutDeltaFacade();
SyncBoDescriptorFacade descF = ssRuntime.getSyncBoDescriptorFacade();
SyncBoDescriptor myBO = descF.getSyncBoDescriptor("ZCON");
boDeltaFacade.setSendType(myBO, SyncBoOutDeltaSendType.SEND_DIRECT);
//SyncManager.getInstance().synchronizeWithBackend(VisibilityType.USER_SHARED);
public boolean setHeaderFieldValue2(
SyncBo sb,
String headerFieldName,
Object value) {
SyncBoDescriptor sbd = sb.getSyncBoDescriptor();
//RowDescriptor trd = sbd.getTopRowDescriptor();
System.out.println("bp 10");
RowDescriptor trd=sbd.getRowDescriptor("010");
System.out.println("bp 11");
FieldDescriptor fd = trd.getFieldDescriptor(headerFieldName);
System.out.println("fd:" +fd.getFieldName());
if (fd != null) {
BasisFieldType bft = fd.getFieldType();
//Row header = sb.getTopRow();
System.out.println("bp 12");
//Row header = null;
Row[] header=null;
//try {
//header = sb.getRow("0001211181");
//header=sb.getTopRow();
header=getItemInstances(sb,"010");
if(header==null){
System.out.println("is null");
}else{
System.out.println("not null");
//} catch (PersistenceException e1) {
// TODO Auto-generated catch block
// System.out.println("Exception getRow:" +e1.getMessage());
// e1.printStackTrace();
System.out.println("bp 13");
try {
// Integer operator
if (bft == BasisFieldType.N) {
System.out.println("Numeric");
NumericField nf = header[0].getNumericField(fd);
if (nf != null) {
BigInteger ii = new BigInteger(value.toString());
nf.setValue(ii);
return true;
} else {
return false;
// Character operator
if (bft == BasisFieldType.C) {
System.out.println("Character");
CharacterField cf = header[0].getCharacterField(fd);
if (cf != null) {
cf.setValue(value.toString());
return true;
} else {
return false;
// Decimal operator
if (bft == BasisFieldType.P) {
System.out.println("Decimal");
DecimalField df = header[0].getDecimalField(fd);
System.out.println("bp 1.1");
if (df != null) {
System.out.println("bp 1.2");
BigDecimal bd = new BigDecimal(value.toString());
System.out.println("bp 1.3");
df.setValue(bd);
System.out.println("bp 1.4");
return true;
} else {
System.out.println("bp 1.5");
return false;
// Similar operation for time and date operator fields
if (bft == BasisFieldType.D) {
System.out.println("Date");
DateField df = header[0].getDateField(fd);
if (df != null) {
if (value.toString().equals("0")) {
Date dat = Date.valueOf("0000-00-00");
df.setValue(dat);
} else if (!value.toString().equals("")) {
Date dat = Date.valueOf(value.toString());
df.setValue(dat);
} else {
Calendar cal = Calendar.getInstance();
java.sql.Date bd =
new java.sql.Date(cal.getTime().getTime());
df.setValue(bd);
return true;
} else {
return false;
// Similar operation for time and date operator fields
} catch (SmartSyncException ex) {
System.out.println(ex.getMessage());
} catch (PersistenceException e) {
System.out.println(e.getMessage());
return false;
SyncType: T01 Wrapper: GetList,GetDetail,Modify
<?xml version="1.0" encoding="utf-8" ?>
- <MeRepApplication schemaVersion="1.1" id="ZCON" version="01">
<Property name="CLIENT.BUILDNUMBER" />
<Property name="C_APPLRESOLVE" />
<Property name="DATA_VISIBLE_SHARED">X</Property>
<Property name="E_APPLRESOLVE" />
<Property name="FACADE_C_CLIENT">X</Property>
<Property name="FACADE_E_CLIENT">X</Property>
<Property name="HOMEPAGE.INVISIBLE" />
<Property name="INITVALUE" />
<Property name="RUNTIME">JSP</Property>
<Property name="TYPE">APPLICATION</Property>
- <SyncBO id="ZCON" version="1" type="timedTwoWay" allowCreate="false" allowModify="true" allowDelete="false" reqDirectSync="false" downloadOrder="1">
- <TopStructure name="TOP">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="PERSNUMBER" type="N" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <ChildStructure name="010">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="PERSNUMBER" type="N" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="CITY1" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="CITY2" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="STREET" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="HOUSE_NUM" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="REGION" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
</ChildStructure>
</TopStructure>
</SyncBO>
</MeRepApplication>
Message was edited by:
yzme yzme<u>my intention is very simple, i just need to update a field in a row and update to the middleware so that the backend will reflect the changes. </u>
>2 if i set the conflict/error handling to application, then i should have to implement some code for it, right ?
>3) List syncbooutdelta
<b>SyncKey:0001233035 Action:M SendType:SEND</b>
doesnt it mean that when i sync , the uploader will pick up this data and do a modification ??
i have change the metadata like this
<SyncBO id="ZCON" version="1" type="timedTwoWay" allowCreate="false" allowModify="true" allowDelete="false" reqDirectSync=<b>"true" </b>downloadOrder="1">
1) i try to sync the application and check the worklist monitor, there is nothing in the inbox ? how come ?
2)if i test using emulator, i try to modify a value and execute, i am getting the following error.
<u>
Header action from mobile="MOD", R/3 action="ADD"
Return code 1 (DOWNLOADER)
</u>
i try to modify not "Add"
3) I am using Time 2 Way , how to check it is synchronous or asynchronous ? in merep_sbuilder, the default asyn. is checked, meaning async ??
the type is T01 , ASYNC
4)
public void checkInboxConflict(){
ErrorConflictInbox errorConflictInbox= SmartSyncRuntime.getInstance().getInboxNotifier().getErrorConflictInbox();
MeIterator iter;
SyncBoResponse resp;
try {
iter= errorConflictInbox.getAllSyncBoResponses();
while(iter.hasNext()){
resp= (SyncBoResponse)iter.next();
String bo=resp.getSyncBoDescriptor().getSyncBoName();//SyncBo Name
String state=resp.getSyncBoResponseState().toString();
String res=resp.getResponseType().toString();//Get the SyncBo response type (conflict or ERROR)
String msg=resp.getText();// This will return the exact message from the server
System.out.println("bo:" +bo +" state: " +state +" res: " +res +" msg:" +mtext);
boolean syncStatusComplete= SmartSyncRuntime.getInstance().getInboxNotifier().isSyncStatusComplete();
System.out.println("syncStatus:" +syncStatusComplete);
}catch (Exception e) {
e.printStackTrace();
<u>bo:ZCON state: INITIAL res: CONFLICT msg:Conflict: R/3 = delete, device = modify
SyncStatus=true (complete)
</u>
5) after that i change my code to this
while(iter.hasNext()){
if(resp.getSyncBoResponseState().equals(SyncBoResponseState.INITIAL)){
String a=resp.getSyncBoResponseState().toString();
String a1=syncBO.getSyncState().toString();
resp.acceptClientSyncBo(); //No transaction stated to commit
resp.delete();
String b=resp.getSyncBoResponseState().toString();
String b2=syncBO.getSyncState().toString();
System.out.println("state1: " +a +"state2: " +b);
System.out.println("SyncState1: " +a1 +"SyncState2: " +b1);
<u>state1: INITIAL state2: RESOLVED </u>
<u>SyncStatus1:QUANRANTINE SyncStatus2: INCONSISTENT</u>
and i try to sync ...no data in worklist
6)i try to list out all the delta to be uploaded
ListAllOutDelta to be upload
<u>SyncKey:0001233349 Action:I State:99925F8E24DFFE49A4563C5E018E9B61 SendType:SEND
</u>
i am modifying the rows, not Insert a new row, the Action:'I' instead of 'M', pls clarify on this.
after i sync, i found out that there is 2 record with different syncKey but same primary key and all attributes appear to be same except the attribute that i changing.
<u>SYNCKEY PERSNUMBER CITY STREET HOUSENO</u>
0001230298 000000000 HELL <u>ANG MO KIO</u> 0123456789 (modified record)
0001230299 000000000 HELL <u>HEAVEN ST</u> 0123456789(old record)
i check the application and found out that the previous record that i modify have its value changing locally but not updated into the backend, after sync, there is another record downloaded into this application which is the old record before i modify with different syncKey.
but when i check the backend table, there is only 1 record inside, because i dont implement the 'Create' Bapi.
does it make sense ?
7) when i check my client , the data is persisted with modified value , but the changes is not reflected in the server, how come the data in client is not uploaded to the server.
acceptClientSyncBo will make the client wins how come the data is not get updated in server ?
Re: Regarding modifying Sync BO
According to him, can anyone translate the things highlighted below
for modifying one sync bo instance , there is no need to use createUnlinkedCopy()..
just use like this..
sb = dataFacade.getSyncBo(sbd,key);
SmartSyncTransactionManager transactionManager;
transactionManager = dataFacade.getSmartSyncTransactionManager();
transactionManager.beginTransaction();
setHeaderFieldValue(sb,"PERSNUMBER","9866321467");
setHeaderFieldValue(sb,"FIRSTNAME","RajaSekhar");
setHeaderFieldValue(sb,"LASTNAME","Varigonda");
setHeaderFieldValue(sb,"PROFESSION","Technical Specialist");
setHeaderFieldValue(sb,"***","MALE");
setHeaderFieldValue(sb,"BIRTHDAY","1977-09-28");
setHeaderFieldValue(sb,"HEIGHT","165");
setHeaderFieldValue(sb,"WEIGHT","75");
// Commit the transaction
transactionManager.commit();
setHeaderFieldValue - can be used to set value in new sync bo instance , or modify the instance.
<b>
But one main think here have to consider is , if you have created one Sync Bo instance , not synchronized with back end and u have modified that, then thats just like a creation .So during sync this will call Create Bapi Wrapper.
</b>
But after synchronization , is u are modifying that instance , then it is a modification(will call MODIFY Wrapper in back end during synchronization). u must have the right to modify this instance in the client side.
hope u got it.
u can debug MI Applications in NWDS.
refer this blog written by Arun
/people/arunkumar.ravi/blog/2006/02/22/execute-debug-your-mi-code-from-nwds
let me know , if u have doubts
Regards
Kishor Gopinathan
pls comment... -
Can not update an assignment block with on_new_focus
Hello Experts,
I have the following problem. I created a new component which is similar to the component BP_BPBT to create activities for Business Agreements. In the overview page of the business agreement in WebUI, I have now the assigment blocks "Plannend activities" and "Interaction History".
When I create a new activity in the assigment block "planned activities" with the new button and save the activity with the buttons "SAVE" or "SAVE AND BACK". The new created actity is shown, depending on the "Active Status" , in one of the assignment blocks "Plannend activities" and "Interaction History". When I create an another activity in the same way, the new actiity is not shown in the assignment blocks. But when I reload the page again, I can see the new created activity.
During debugging, I see, that the first creating activity is in the collection in the method ON_NEW_FOCUS. When I create an another activity, the collection is not updated. Here is my coding:
* get collection of dependent nodes
TRY.
entity ?= focus_bo. "BuAg Entity
CATCH cx_sy_move_cast_error.
RETURN.
ENDTRY.
TRY.
lr_entity = entity->get_related_entity( iv_relation_name = 'BuAgBuPaRel' ).
lv_collection = lr_entity->get_related_entities(
iv_relation_name = 'BuilInteractionHistoryRel'
* D022159: Performance optimization
iv_mode = lv_mode ).
Can anyone explain me, why the activities (after the first one) are not in my collection.
Can anyone help me to fix this problem?
Kind Regards,
John H.Hi,
Please check if you have added your entity to collection after you save the entry. It looks like your value is saved in DB but its not reflected on UI because you are not refreshing your collection.
I would suggest that you write a code after you save and commit to refresh your collection of the context node.
Regards,
Bhushan -
Table record is not updated correctly after navigate back from detail page
I have 2 jspx pages one (page A) has a table displaying the employee record, another one (page B) is used to update the selected employee record. On page A, when selecting a record and clicking the 'Details' button I can be navigaed to pag B on which I can modify the record information in a form component. I have one table column 'teamName' which is binding to a LOV at VO layer and on pageB I am using <af:inputComboboxListOfValues> to show a editable LOV list for this attribute, when I input a new value here and save it, I can go back to page A but the team name for this record shows empty, by querying the database I do find the record updated successfully with the changed value. And when I reloaded the page the record can show the new team name value. Why it is not updated in the employee table when immediately navigating back from page B? I have set the table iterator refresh attribut to "always" but still failed. Can anyone help on this issue? Thanks!!
BTW, for other columns (not LOV) they are ok, the table can show the changed value correctly.
Edited by: user774592 on Jul 14, 2011 7:56 PM
Edited by: user774592 on Jul 14, 2011 9:59 PMThanks for reply!
I did exactly the same as what you said. I d&d the data control Commit operation on page B to generate a 'Save' commandToolbarButton with the action attribute set to 'save' which is the from outcome for navigating back to page A. Is there any business logic I need to write here? Currently I have no.
Note: In this case I used an editable LOV, I have a requirment that besides selecting a existing value from the lov, user can also input a new value in the LOV. When going back to page A, I do find the LOV list is updated to contain the new vaule. Just the record in the table shows an empty value instead of the new value. Still do not know why. -
OWB 11gR2 - Internal ERROR: Can not find the ACL containter
OWB 11gR2 - Internal ERROR: Can not find the ACL containter
=======================================
I am using OWB 11gR2 (11.2.0.1) on Win XP 32 bit. I have 3.23 GB RAM. OWB design center is ver slow on my desktop. We have our OWB repository is on Unix server.
We applied the patch 10270220.
We are getting
Internal ERROR: Can not find the ACL containter for object:CMPPhysicalMap@19654/id=104020/owningFCO=104020/proxyFor=(CMPPhysicalMapGen@19f99ae/id=104020/stname=null/pname=MAPPING_1/lname=MAPPING_1/status=POSTED/committed=true/persistent=true/propsLoaded=true)
What is happening here?
Thanks in helping.We have a map with 3 sources and 1 target. The 3 sources pass through Joiner then Expression then Target.
We are getting this error, during deployment. It shows compling for awhile, then through this error.
Here is the piece from detail window:
===========
at oracle.wh.repos.pdl.security.SecurityPolicyManager.getAccessCharMapOfPrivilegeOwner(SecurityPolicyManager.java:174)
at oracle.wh.repos.impl.foundation.CMPElement.getAccessCharMapOfPrivilegeOwner(CMPElement.java:2806)
at oracle.wh.repos.pdl.security.OWBSecurityImpl.hasPrivilege(OWBSecurityImpl.java:914)
at oracle.wh.repos.pdl.security.OWBSecurityImpl.internalSecurityCheck(OWBSecurityImpl.java:1542)
at oracle.wh.repos.pdl.security.OWBSecurityImpl.securityCheck(OWBSecurityImpl.java:694)
at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:959)
at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:924)
at oracle.wh.repos.pdl.dispatcher.EventDispatcherImpl.beforeReadObject(EventDispatcherImpl.java:824)
at oracle.wh.repos.pdl.foundation.OWBRoot.beforeRead(OWBRoot.java:1785)
at oracle.wh.repos.owbGen.CMPStringPropertyValueGen.getValue(CMPStringPropertyValueGen.java:217)
at oracle.wh.repos.impl.properties.CMPStringPropertyValue.getValue(CMPStringPropertyValue.java:117)
at oracle.wh.repos.impl.extended.PropertyFactory.getStringValue(PropertyFactory.java:440)
at oracle.wh.repos.impl.extended.CMPWBPrimitiveProperty.rawStringValue(CMPWBPrimitiveProperty.java:260)
at oracle.wh.repos.sdk.mapping.WBMapHelper.getStringProperty(WBMapHelper.java:716)
at oracle.wh.repos.sdk.mapping.WBMapHelper.getStringProperty(WBMapHelper.java:733)
at oracle.wh.repos.sdk.mapping.WBMapHelper.getReferencedLocations(WBMapHelper.java:1361)
at oracle.wh.service.impl.runtime.EnvironmentUtils.getReferencedLocations(EnvironmentUtils.java:284)
at oracle.wh.service.impl.runtime.EnvironmentUtils.getReferencedLocations(EnvironmentUtils.java:141)
at oracle.wh.service.impl.runtime.EnvironmentUtils.getReferencedLocations(EnvironmentUtils.java:135)
at oracle.wh.service.impl.runtime.RuntimePlatformServiceImpl.getReferencedLocations(RuntimePlatformServiceImpl.java:1238)
at oracle.wh.ui.runtime.application.WHRuntimeCommandUtil.addConnectorLocations(WHRuntimeCommandUtil.java:477)
at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.getSingleDeployLocations(WHRuntimeCommandGenerateDeploy.java:3408)
at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.getLocationsAndNewConnectors(WHRuntimeCommandGenerateDeploy.java:3517)
at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.doPreDeploymentActions(WHRuntimeCommandGenerateDeploy.java:3224)
at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy._internalDeploy(WHRuntimeCommandGenerateDeploy.java:2420)
at oracle.wh.ui.runtime.application.WHRuntimeCommandGenerateDeploy.doDeploymentAsynch(WHRuntimeCommandGenerateDeploy.java:2117)
at oracle.wh.ui.runtime.application.WHRuntimeCommandHandler$1.construct(WHRuntimeCommandHandler.java:1005)
at oracle.wh.ui.runtime.SwingWorker$2.run(SwingWorker.java:124)
at java.lang.Thread.run(Thread.java:595)
===========
Did anyone receive such errors?
Maybe you are looking for
-
What is difference between Portal on NW 7.3 and Portal on NW 7.0 Ehp 2?
I am checking out the features of NW 7.3 (Java server related) and NW 7.0 Ehp 2 (ABAP server / Business Suite related). If I think about NW 7.3 I am think NWDS, Web Dynpro Java, Visual Composer, Composition Environment, PI, Mobile, Portal etc. so bas
-
Unable to open Hyperion workspace with weblogic 8.1
HI .. I m Using Web logic 8.1 as application server for Hyperion Reporting (Workspace,WebAnalysis). I forgot the password of weblogic . During the Hyperion configuration its accepting any password what i enter , and its also showing successful config
-
i'd like to hook up my TouchSmart 600 to a digital projector (for large movie showings). Is there a video out option or connector on the TouchSmart? any suggestions? thanks, Idan
-
Gallery (3.0.2): Bugs & no sorting option make the App useless
Hi, I recently received my Touchpad. When I openend the Gallery App I was impressed by the design and the nice integration. Unfortunately, I had to find out soon that - while the app looks good - it is practically useless. This is basically for two r
-
How does one prevent a column in a database from being visable to end users
I have a password column I would like to hide by default from any one with query access. How does one do this?