IDSM placement and redundancy question

Hi, Does the IDSM-2 support any sort of redundancy protocol?
I can't see anything in the config guide.
If I wanted to place a redundant pair on the outside of a pair of firewalls, how would I manage the redundancy of them.
My other question is, is it better to place the IDSM on the outside of external facing firewalls or on the inside?
Many Thanks, Dom

These are two IDSM-2s connected to slot four and give of the same chassis. We are running FWSM >> MSFC OUTSIDE setup. All InterVLAN traffic is evaluated first by the IDSM than by the FWSM. Users default gateway is the FWSM.
Here you go:
intrusion-detection module 4 management-port access-vlan 100
intrusion-detection module 5 management-port access-vlan 100
intrusion-detection module 4 data-port 1 channel-group 5
intrusion-detection module 4 data-port 2 channel-group 6
intrusion-detection module 5 data-port 1 channel-group 5
intrusion-detection module 5 data-port 2 channel-group 6
intrusion-detection port-channel 5 trunk allowed-vlan 200-204,208
intrusion-detection port-channel 5 trunk allowed-vlan 708
intrusion-detection port-channel 5 autostate include
intrusion-detection port-channel 5 portfast enable
intrusion-detection port-channel 6 trunk allowed-vlan 260,280,400,401
intrusion-detection port-channel 6 trunk allowed-vlan 111-114
intrusion-detection port-channel 6 autostate include
intrusion-detection port-channel 6 portfast enable
Regards
Farrukh

Similar Messages

Faces / Places and Mobileme Gallery question

Hi all, i could not find much on this but my question is when using faces / places and Mobileme gallery does this actually take up hard drive space ? With faces and places does that actaully create another image or is it just linked to your main library ? And for Mobileme Gallary does that actually download the images to your Mac ?
Thanks

Drop them on the desktop then upload directly from the MoMe Album.
Allan

Question about RPS2300 and 'redundancy" config on IOS router

We have a 2951 router connected to an RPS2300 remote power supply. On the router there are two commands applied in global config mode, "redundancy inter-device" and "redundancy". The engineer who set up the router originally states that these commands are necessary for the RPS2300 to work properly with the 2951, but the documentation for the "redundancy inter-device" and "redundancy" commands do not seem to be related to the RPS at all. Can anyone tell me if either of these commands are required for RPS, or if there is any other config that must be added to the 2951 for the RPS2300 to function properly?
An excerpt from the 2951 config:
vtp mode transparent
username <detail removed>
username <detail removed>
redundancy inter-device
redundancy
controller T1 0/0/0
As you can see, there is no additional configuration under either of the "redundancy" commands.
Thanks
-Mat

To clarify, the 2951 router has an RPS-ADPTR-2921-51 module installed which connects to the RPS2300 unit.
-Mat

Purpose of Retention Policy Recovery Window and Redundancy

Hi,
Good Evening,
I have some queries regarding the RMAN Retention Policy Recovery Window and Redundancy.
1. Any condition is there to set the Retention Policy Recovery Window and Redundancy and control_file_record_keep_time?What is the relationship between these 3 parameters?
2. Explain the scenario if i set the control_file_record_keep_time=4 Redundancy=3 and Recovery Window=7?
3. If i set the Redundancy=3 and Recovery Window=7 means my backup place only have 3 copies of backup based on the redundancy then what is the purpose of Recovery Window=7 please give some example.
4. If i change the values for Recovery Window=3 and Redundancy=7 what will happened, how many days backup will be available in my FRA location?Explain with one scenario?
Thanks in advance.
Vijay.

Hi,
Take a look of the above doc contents:
Configuring the Backup Retention Policy
As explained in "Backup Retention Policies", the backup retention policy specifies which backups must be retained to meet your data recovery requirements. This policy can be based on a recovery window or redundancy. Use the CONFIGURE RETENTION POLICY command to specify the retention policy.
so you have option to choose either recovery windows or redundancy based you can set the configuration like
read in the Doc What it said for both:
Recovery Window-Based Retention Policy ==>RMAN does not consider any full or level 0 incremental backup as obsolete if it falls within the recovery window. Additionally, RMAN retains all archived logs and level 1 incremental backups that are needed to recover to a random point within the window.
Redundancy-Based Retention Policy==>The REDUNDANCY parameter of the CONFIGURE RETENTION POLICY command specifies how many full or level 0 backups of each datafile and control file that RMAN should keep. If the number of full or level 0 backups for a specific datafile or control file exceeds the REDUNDANCY setting, then RMAN considers the extra backups as obsolete. The default retention policy is REDUNDANCY 1.
RMAN> show RETENTION POLICY;
using target database control file instead of recovery catalog
RMAN configuration parameters for database with db_unique_name DDTEST are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
RMAN> CONFIGURE RETENTION POLICY TO REDUNDANCY 3;
old RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
new RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO REDUNDANCY 3;
new RMAN configuration parameters are successfully stored
RMAN> show RETENTION POLICY;
RMAN configuration parameters for database with db_unique_name DDTEST are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 3;
RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
old RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO REDUNDANCY 3;
new RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
new RMAN configuration parameters are successfully stored
RMAN> show RETENTION POLICY;
RMAN configuration parameters for database with db_unique_name DDTEST are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
CONTROL_FILE_RECORD_KEEP_TIME:This parameter applies only to records in the control file that are circularly reusable (such as archive log records and various backup records) ref Doc:CONTROL_FILE_RECORD_KEEP_TIME
1. Any condition is there to set the Retention Policy Recovery Window and Redundancy and control_file_record_keep_time?What is the relationship between these 3 parameters?
2. Explain the scenario if i set the control_file_record_keep_time=4 Redundancy=3 and Recovery Window=7?
3. If i set the Redundancy=3 and Recovery Window=7 means my backup place only have 3 copies of backup based on the redundancy then what is the purpose of Recovery Window=7 please give some example.
4. If i change the values for Recovery Window=3 and Redundancy=7 what will happened, how many days backup will be available in my FRA location?Explain with one scenario?
so i believe you can get the Answer from Your Question from Above details.
HTH

2 ISP load balancing and redundancy

Hello!!
Our small company has about 40 branches spreaded within city. Branches are connected by optic wire supplied by our ISP. So in ISP our branches are located in one VLAN. From every branch we created VPN tunnel to our server room in central office. Central office is like a cetner point. If optic wire fails to central office, there would no VPN tunnels and no network to all branches. Moreover, all the traffice goes through central office.
Now we decided to pave one more optic line to our central office. And that will increase bandwidth and redundancy.
Private network topology: There are no default gateways and ip-addresses. For examle, at first branch I will plug computer directly into media converter and at the second branch plug another computer to the media converter. After that this two computers became in one network. And can assign any ip addresses to them.
What I have: our firewall do enough work, don't want to overload it. But we have some free ports in our new cisco 3750. The question is how to do load balancing and redundanccy? Can it do load balancing according to traffic? And how load balance incoming traffic? For example, connection was established from branche's router, how this router will choose through which line make connection? By the way, at all branches we use noisy cisco
3700 series routers.

Sorry for upping 1 year old threat.
We talked to our Network Provider. They said "these two cables are coming from two different places, so there is no way to use etherchannel. You must use active-standby solution."
Relying on STP we just put two cables into 3750 stack. But with default STP settings, connection was very unstable, many packet losses and disconnections. So we found easy solution with "flex links", making one interface backup of the other. And only now I recognized that this is not a failover solution. Because, if network beyond media converter will down, link from media converter to switch would still up.
What could I do to make our L2 WAN redundant? Are there any additional STP settings.

Mac and Windows Question

I don't know if this is the right place for this question, but it's the closest thing I could find to Apple software. As of now, I only own a Dell pc. When I can fork up enough money, I'm going to get a Mac, but until then, I was wondering if there was a name to the software that changes the screen according to the mouse's position. For example, if you move the mouse pointer into the upper right hand corner, all of the windows minimize, and if you put it in the bottom left, then you can choose which window you want to open. If anyone knows, please let me know. If anyone, on the off-chance, knows of a program that can do the same for windows, that would also be greatly appreciated. I wasn't sure if that was software or just part of the mac system, but it's really convenient and I'd appreciate it if someone got back to me. Thanks a bunch,
Ben

Hi Ben
Welcome to the Apple Discussions!
That is called Exposé, and it's part of OS X.
There are a few lookalike apps for Windows - here are a couple:
Windows Exposer
TopDesk
Matt

Ethernet and WIFI Question

This maybe a redundant question, I want to back up the stuff in my Imac using TC. I do not want to use this Imac wireless nor do I want my backups done wireless but can I still use the wifi system on TC for Ipad ,Nook, etc. without having to configure my Imac everytime to use a wifi devise?

Yes. Just connect the iMac to your Time Capsule with an Ethernet cable, then go into System Preferences->Network and either set Ethernet to a higher priority than AirPort, or turn off AirPort completely.
Your wireless devices will continue to connect to the internet, and even to your iMac, through the Time Capsule wirelessly, while your iMac will enjoy the faster speeds and improved reliability of the wired ethernet connection. Your devices which connect to your iMac "wirelessly" will continue to do so; they will not know the difference between your iMac on the Time Capsule's wireless network and your iMac on the Time Capsule's wired network – it's all the same as far as connectivity is concerned.

Placement and appearance digital signature

I have a couple of questions about the placement and appearance of the digital signature.
First the placement:
Is it technically possible to place the digital signature after Word-fields when you convert Word to PDF/A? For example the { DOCPROPERTY "Name" }? Where the name is a custom field.
Appearance:
What I am trying to achieve is to get a digital signature appearance just like the one on an analog paper. Just the name, date and a picture of the analog signature (created by tablet, scan or mouse). Is it possible to get rid of the following:
Question/check mark?
The text "Digitally signed by"?
The line with the attributes from the certificate?
Thanks in advance!

Conversion of Word->PDF (PDF/A) is a specific application process (be it Acrobat or some other program). The visual appearance of the signature is defined by the application that you are using to sign the PDF.
This forum is for PDF file format discussions not application ones - so try the forum for the program (Acrobat?) you are using.
As a general answer - YES, you can put the signature anywhere on the page you want with whatever contents you want.

Macbook pro starts up but i see picture of some files and a question mark

So I was on my laptop today and it just outta nowhere froze , the song i was listening stopped and i couldn't change the page, i could move the trackpad but nothing else.
so i clicked on the off button and turned it off.
then i tried to turn it on again but while loading it just stayed blank and this picture of some files and a question mark on them appeared, i have no idea what's going on.
I turned it off again and turned it back on and the little apple appeared and it was loading but then a sign appeared like one of prohibited (the one that's a circle and has a slash across it) and idk what to do! i'm so frustrated all my school files are there and idk why this happened in the first place.
i turned it off and just put it to charge.
lately i've been using it a lot and i had a few things on when it froze , so im just gonna leave it off for a while but what can i do?
how do u solve this? has anyone had this happened to their macbook pro already? i bought it just last year idk why this is happening.

The folder and question mark means it cannot find a valid OSX Boot Volume, you need to Boot from your original install DVD (hold c at start) and then run Disc Utility from the top menu bar and run both 'Repair Disc' and 'Repair Permissions'. If it still doesn't boot from the internal hard drive then you need to boot from that install DVD again and do an archive (re)install of the operating system. (Your User data will be saved that way)

Firefox users cannot presently exercise choice, to opt-in or out of "data collected for improving services." As a result, Firefox is constantly dialing home, sometimes four times a day or more up to 48 times a day. There is some over-stepping and redunda

I understand the charter on this is to "check-in" once every time the program is turned on, and then once every 6 hours after that, or, once every 24 hours presumably. But the phone-home-effect is over-stepping these basic parameters. If a user turns their browser off and then on, Firefox is still obligated to "check-in" even if it just checked in 3 minutes prior. If the coding is not pre-designed to overstep, or act excessively in a redundant focus, the instance of once every six hours or once every 24 hours, is still overmuch if a user has been doing this (non-voluntarily-participating) for 9 months or longer.
== This happened ==
Every time Firefox opened
== This started when Firefox took up the initiative of "improving service. to end users" or similar idea, making the web safer for novice users, etcetera.

Opening question was truncated. Should read: "Firefox users cannot presently exercise choice, to opt-in or out of "data collected for improving services." As a result, Firefox is constantly dialing home, sometimes four times a day or more up to 48 times a day. There is some over-stepping and redundancy here. It would seem the practice of "improving service" has been accomplished with as much information as Mozilla has gathered in the last 6-18 months about its users habits. '''Isnt it about time to give users the option to opt out of that now that most the heavy liftiing has been accomplished?'''"

Korea - Business Place and Section Codes

Hello Gurus
Apologies in advance for what could be a niaive question.
We are implementing basic FI functionality for our Korean office, but have been told that a 3rd party will still produce the tax returns.
With this in mind, is there anyway we can "switch-off" the need to enter Business Place and Section Codes? Any other workaround will be considered. I'm not fussy.
Thanks
Ian

Anybody help?

Business Place and Section Code Issues

Dear Experts,
I am using SAP IDES 4.7.
For account type = K (Vendors), I have done WHT setting. Also through validations I have made Business Place and Section Field mandatory for the company code I am using.
But the issue is the section code field BSEG-SECCO in not visible in any of the t.codes line F-43, FB60 or MIRO, so the validation is not working.
Kindly help me how to make that field visible for all the transaction codes.
Uttam.

Please check if the following thread helps.
Business Place & Section Code Field is missing in FB60// "Bus.place/sectn"
Also, search this forum with keywords "business AND place AND section AND code AND FB60". Make sure you choose ALL threads and not just the ones in the past 90 days (that is the default option that shows up!). There are quite some threads/questions on this topic!!

Macbook Air - White/Grey Screen with a folder and a question mark

Out of the blue , my macbook air stopped starting up and strted to show me a white/grey screen with nothing but a folder and a question mark . After searching on the internet for solutions and trying to reset my PRAM setting , it still wouldn't boot up . I opened up disk utility and going through internet recovery , I ran the first aid verification on my MAC OS X Base System and it said that it found no problems . I can't restore or erase by the way and i really wouldn't erase my files as I have very important files on my mac . Moving on , I tried to reinstall OS X , but apperently it needs a disk to install OS x on and since none appear , I tried using an USB . After creating a partition and erasing everything on my USB , not happy about that , it wasn't big enough for the OS . So now I am basically stuck in the mac white screen Limbo .
Any sort of help would be fantastic and please do keep in mind that this is a macbook air and I do not have a place to put DVDs into . All I have read on different forum pages didn't help so i decided that it would be a good idea to create my very own thread . I am not very sure about the Mountain Lion version ,but I am not very sure that it matters .

Out of the blue , my macbook air stopped starting up and strted to show me a white/grey screen with nothing but a folder and a question mark . After searching on the internet for solutions and trying to reset my PRAM setting , it still wouldn't boot up . I opened up disk utility and going through internet recovery , I ran the first aid verification on my MAC OS X Base System and it said that it found no problems . I can't restore or erase by the way and i really wouldn't erase my files as I have very important files on my mac . Moving on , I tried to reinstall OS X , but apperently it needs a disk to install OS x on and since none appear , I tried using an USB . After creating a partition and erasing everything on my USB , not happy about that , it wasn't big enough for the OS . So now I am basically stuck in the mac white screen Limbo .
Any sort of help would be fantastic and please do keep in mind that this is a macbook air and I do not have a place to put DVDs into . All I have read on different forum pages didn't help so i decided that it would be a good idea to create my very own thread . I am not very sure about the Mountain Lion version ,but I am not very sure that it matters .

Eclipse and JBoss question ?

hi,
i know that it's not the place for this kinfd of question, i tried the JBoss forum, unfortynateley it's not very active, so....
I have just installed a development environnement (Eclipse + Eclipse JBoss-IDE plugin, + JBoss 4.0 application server). everything is ok, i succeed creating a simple J2EE application (servlet + ejb session), but i have question about the following process
generating file for the ejb session using xdoclet
packaging the war file
packaging the jar file
packaging the J2EE ear file
deploying the applicationsuppose the folowing situation =>
*I create a new EJB : so i have to generate the file (locale, home), repackaging the jar file and finally redeploy the ear file. is it the step i have to do ?
*I want to modify an already deployed EJB, after code mofication, so i have to regenerate the file (locale, home), repackaging the jar file and finally redeploy the ear file. is it the step i have to do ?
*And same question about jsp and servlet, have i to regeneare the war file and redeploy it ?
and what about "hot deploying in JBoss".
Thanks for your help

generating file for the ejb session using xdoclet
packaging the war file
packaging the jar file
packaging the J2EE ear file
deploying the application:-)
suppose the folowing situation =>
*I create a new EJB : so i have to generate the file
(locale, home), repackaging the jar file and finally
redeploy the ear file. is it the step i have to do ?Package the EJB in a JAR and re-create the EAR with the new EJB jar in it. You might have to add some descriptors for the EAR.
*I want to modify an already deployed EJB, after code
mofication, so i have to regenerate the file (locale,
home), repackaging the jar file and finally redeploy
the ear file. is it the step i have to do ?Yes.
*And same question about jsp and servlet, have i to
regeneare the war file and redeploy it ?Yes.
and what about "hot deploying in JBoss".Search on Google or read the documentation.

Lumia 800 touch not working and battery question m...

I have been quite happy with my two months old Lumia 800 until recently when I accidentally dropped it on cobblestone and damaged the glass. Although the phone still worked I ordered a new combined glass, digitizer and screen from an internet supplier. The spare part was OEM and it was relatively painless to replace the old screen with the new screen. However, after replacing the screen, touch did not work and a question mark appeared over the battery icon. I searched the forum and other places on the internet and found out that this type of issue had been seen before and that it in some cases could be fixed by an upgrade of the firmware and a hard reset.
Now a few frustrated days later I am starting to think that possibly the replacement part is faulty as I have tried various firmwares, various ways to charge the battery with various types of USB chargers, but still no success. The phone simply won't respond to touch. Currently I am on firmware 1750.805.8773.12220.
Would any of you in the forum have any ideas what could possibly be wrong? Could it be a broken cable to the screen? I had similar issues with an iPhone 3GS which turned out to have a dodgy ribbon cable connecting the phone and the digitizer, but I cannot seem to find anything on the net mentioning this as a potential problem and I am wondering just how likely it is that the part is faulty, when the screen works fine and only the touch functionality is not working.
Any ideas would be much appreciated. It is very difficult to get in touch with Nokia in Denmark as their support phone is not working and the websites chat functionality seems to be off line all the time.
Best regards,
Anders

You shouldn't have used the phone at all after it dropped in Water.
Only Nokia Care can assess the extent of damage and tell you the repair cost. First, they should accept the device for repairs..and Second, this is certainly not covered under Warranty ..
Even if the phone is repaired with replacing a few components, not sure about the effect of the seepage on other parts which may start acting in a short span ...

IDSM placement and redundancy question

Similar Messages

Maybe you are looking for