IDSM SPAN and filter on destination

Greetings
When I set up a SPAN session with a regular TP interface as a destination I am able to allow specific VLANs on the destination trunk port. This does not work for me when I try the same setup with the IDSM data port as the destination. Has anyone got this working?
I have IOS 12.2SXF5 on the 6513 and 6.0(4)E1 on the IDSM.
Regards
Fredrik

This does not work for the IDMS-2.
The trunk configuration of the IDSM-2 does NOT work in conjunction with setting the IDSM-2 as a span destination port.
The trunk setting of the IDSM-2 is only used when configuring the IDSM-2 for InLine Vlan Pairs.
For Span monitoring the IDSM-2 needs to be configured for Promiscuous mode and so the Trunk configuration is not used.

Similar Messages

Get-messagtrackinglog and filter by RemoteIpRanges

Hello,
Exchange 2010 sp3
Is it possible to perform a get-messagtrackinglog and filter by RemoteIpRanges? I want to know whether a specific ip address is sending mail messages to the send connector?

Hi,
Agree with Amit. We can use ConnectorID to specify the destination Send connector or Receive connector. You can refer to this article below.
http://technet.microsoft.com/en-us/library/bb124375(v=exchg.141).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Problem with 'sort and filter' feature of embed codes in Excel Online Web App

So my question has to do with the Excel Online feature where you can share a spreadsheet and embed it in a website with the option of allowing users to sort and filter the data. (The option is under the "Interaction" heading.)
One of the options if you look closely is "Let people sort and filter" which is not checked off. In the embed code you can see "AllowInteractivity=False". The problem is that when I check "Let people sort and filter"
the embed code changes completely - going from:
<iframe width="700" height="900" frameborder="0" scrolling="no" src="https://onedrive.live.com/embed?cid=dontworryaboutitEDFD383&resid=6BAA9620AEDFD383%21107&authkey=AFj3X8xq2U3IfDE&em=2&wdAllowInteractivity=False&Item='Sheet1'!A1%3AI32"></iframe>
to:
<iframe width="700" height="900" frameborder="0" scrolling="no" src="https://onedrive.live.com/embed?cid=dontworryaboutitEDFD383&resid=6BAA9620AEDFD383%21107&authkey=AFj3X8xq2U3IfDE&em=2&Item='Sheet1'!A1%3AI32"></iframe>
If I manually change 'false' to 'true' that doesn't do the trick so I'm not sure what to try next.
Any thoughts?

Hi,
We support Office for Windows in the current forum, since this question is about Office Online, I suggest you post the question in Office Online forum:
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF. then 2. need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that

OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF; then 2. I need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that??
I had been saving as a PDF and then reducing the size of the PDF by printing it as a PDF with a degree of image compression. I write manuals with a LOT of screen captures and line art that needs to be clear. So it is a balancing act between image clarity and PDF size. The PDFs on the web need to be smaller - sure you can undertsand.
Anyway, when I print the PDF again, I lose both my destinations and bookmarks.
Anyone know of any way to avoid that?

Control the images by creating a custom PDF Job Options and then selecting it in the PDF Job Options drop-down of the PDF setup dialog box (File > Save as PDF...)
Create the custom PDF Job Options file with Distiller. If you do not have Distiller, open the Printing Preferences of the Adobe PDF printer. Start with the Smallest File Size Job Options settings and Edit.

Unable to run XPSDrv Driver and Filter Sample

Hello
I'm facing to a problem with XPSDrv Driver and Filter Sample on my Windows 7 x64 machine
I installed Visual Studio Ultimate 2013
I installed WDK 8.1
I installed WDK 8.1 Test Pack
I installed everything from this
site and I think that's all what I need for building the sample.
Next I downloaded XPSDrv Driver and Filter Sample from
http://code.msdn.microsoft.com/windowshardware/XPSDrv-Driver-and-Filter-980d24bc (btw. there is a step-by-step tutorial how to build the sample)
1. Open the solution file in Visual Studio 2013 (I opened solution C++\XPSDrvSmpl.sln)
2. Add all non-binary files (usually located in the \install directory of the sample) to the Package project
     a. In the Solution Explorer, right click
Driver Files (HERE IS THE PROBLEM, WHAT IS DRIVER FILES ??? SEE PICTURE BELOW)
     b. Select Add, then click Existing Item
     c. Navigate to the location to which you downloaded the sample, and select all the files in the install directory, or the equivalent set of non-binary files such as INFs, INIs, GPD, PPD files, etc.
     d. Click Add
Look at the picture how does my solution look like:
Can anybody tell me what I'm doing wrong?
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

So after I add the InstallPackage, I added all the files in the install folder to the driver files. Than I added all the files of the install folder to the package files in the properties of the driver package. I also added all the dlls of the sample to
the package files. Then I edited the inf file:
Change DriverVer to a new date,because the old one is not working.
And this under the driverver:
CatalogFile=xdsmpl.cat
Add this to each Microsoft.xx sections: {GUID}
Should look like this:
[Microsoft.NTx86]
"XPSDrv Sample Driver" = INSTALL_XDSMPL_FILTERS_PRE_VISTA,{GUID}
[Microsoft.NTia64]
"XPSDrv Sample Driver" = INSTALL_XDSMPL_FILTERS_PRE_VISTA,{GUID}
Change the location of the dlls under SourceDisksFiles to 1 or leave it to 2 if you have subfolders for architecures.
So my inf looks like that:
; Copyright (c) 2005 Microsoft Corporation
; All rights reserved.
; THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF
; ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO
; THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
; PARTICULAR PURPOSE.
; File Name:
; xdsmpl.inf
; Abstract:
; XPSDrv sample driver install file
[Version]
Signature="$Windows NT$"
Provider=%MS%
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=09/19/2013,6.0.1.0
CatalogFile=xdsmpl.cat
[Manufacturer]
%Microsoft%=Microsoft,NTx86,NTia64,NTamd64,NTx86.6.0,NTia64.6.0,NTamd64.6.0
[Microsoft.NTx86]
"XPSDrv Sample Driver" = INSTALL_XDSMPL_FILTERS_PRE_VISTA,{GUID}
[Microsoft.NTia64]
"XPSDrv Sample Driver" = INSTALL_XDSMPL_FILTERS_PRE_VISTA,{GUID}
[Microsoft.NTamd64]
"XPSDrv Sample Driver" = INSTALL_XDSMPL_FILTERS_PRE_VISTA,{GUID}
[Microsoft.NTx86.6.0]
"XPSDrv Sample Driver" = INSTALL_XDSMPL_FILTERS_VISTA,{GUID}
[Microsoft.NTia64.6.0]
"XPSDrv Sample Driver" = INSTALL_XDSMPL_FILTERS_VISTA,{GUID}
[Microsoft.NTamd64.6.0]
"XPSDrv Sample Driver" = INSTALL_XDSMPL_FILTERS_VISTA,{GUID}
[INSTALL_XDSMPL_FILTERS_PRE_VISTA]
CopyFiles=XPSDrvSample,ConfigPlugin,COLORPROFILES
DriverFile=mxdwdrv.dll
PrintProcessor="MS_XPS,filterpipelineprintproc.dll"
ConfigFile=UniDrvUI.dll
HelpFile=UniDrv.HLP
DataFile=XDSmpl.GPD
Include=NTPRINT.INF, MSXPSDRV.INF
Needs=UNIDRV.OEM, XPSGPD.OEM, XPSDRV.OEM
[INSTALL_XDSMPL_FILTERS_VISTA]
CopyFiles=XPSDrvSample,ConfigPlugin,COLORPROFILES
DriverFile=mxdwdrv.dll
ConfigFile=UniDrvUI.dll
HelpFile=UniDrv.HLP
DataFile=XDSmpl.GPD
ICMProfiles=xdwscRGB.icc
CoreDriverSections="{D20EA372-DD35-4950-9ED8-A6335AFE79F0},UNIDRV.OEM", "{D20EA372-DD35-4950-9ED8-A6335AFE79F5},XPSDRV.OEM,XPSGPD.OEM"
[PrinterPackageInstallation.x86]
PackageAware=TRUE
CoreDriverDependencies={D20EA372-DD35-4950-9ED8-A6335AFE79F0}, {D20EA372-DD35-4950-9ED8-A6335AFE79F5}
[PrinterPackageInstallation.amd64]
PackageAware=TRUE
CoreDriverDependencies={D20EA372-DD35-4950-9ED8-A6335AFE79F0}, {D20EA372-DD35-4950-9ED8-A6335AFE79F5}
[PrinterPackageInstallation.ia64]
PackageAware=TRUE
CoreDriverDependencies={D20EA372-DD35-4950-9ED8-A6335AFE79F0}, {D20EA372-DD35-4950-9ED8-A6335AFE79F5}
[DestinationDirs]
DefaultDestDir=66000
COLORPROFILES=66003
[COLORPROFILES]
xdwscRGB.icc
xdCMYKPrinter.icc
[ConfigPlugin]
XDSmpl.ini
XDSmplUI.dll
[XPSDrvSample]
xdsmpl.gpd
xdnames.gpd
xdwmark.gpd
xdbook.gpd
xdcolman.gpd
xdnup.gpd
xdpgscl.gpd
xdwmark.dll
xdcolman.dll
xdbook.dll
xdnup.dll
xdscale.dll
xdsmpl-pipelineconfig.xml
[SourceDisksNames.x86]
1 = %Location%,,
2 = %Location%,,,x86
[SourceDisksNames.ia64]
1 = %Location%,,
2 = %Location%,,,ia64
[SourceDisksNames.amd64]
1 = %Location%,,
2 = %Location%,,,amd64
[SourceDisksFiles]
xdsmpl.gpd = 1
xdnames.gpd = 1
xdwmark.gpd = 1
xdbook.gpd = 1
xdcolman.gpd = 1
xdnup.gpd = 1
xdpgscl.gpd = 1
xdsmpl-pipelineconfig.xml = 1
xdsmpl.ini = 1
xdwscRGB.icc = 1
xdCMYKPrinter.icc = 1
xdwmark.dll = 1
xdcolman.dll = 1
xdbook.dll = 1
xdnup.dll = 1
xdsmplui.dll = 1
xdscale.dll = 1
[Strings]
Location="XPSDrv Sample Driver Location"
MS="Microsoft"
Microsoft="Microsoft"

Solution for Visual composer error: 32k span and 64k byte limit

Dear friends,
I am getting the error in visual composer 32k span and 64k byte limit since last half year,
some time error will get resolved by adding layer in to model OR adding some table and form to model OR reduce the animation effect OR even by doing tab strip view for layer model, doing nested ivew.
but this solution not usefull for every time.
what should we do for this error(32k span and 64k byte limit),
is it solved by updating EP version or by EP java stack or any other updates which will solve the This VC error.
64k error i am getting is:
+Error in compiling Flex application: Error: A function in the code exceeds the 64K byte limit (actual size = '65570'). Since the problem occurs in the compiler-generated deferred instantiation code, please refactor/componentize portions of this document.
(/usr/sap/IBD/DVEBMGS10/j2ee/cluster/server0/GUIMachine_Business_Packages/Managment_cockpit11_31066/FLEX_COMPILATION_FOLEDR/AADCDM.mxml:19)
Failed to compile AADCDM.mxml+
hope to get answer form you,
Thanks and Regards,
Dushyant.

Hi,
I think it's better to post this question into the Visual Composer forum. Anyway, the 32k/64k bug is solved with the flex2 server which is already released.
Also have a look into the [Wiki page|https://wiki.sdn.sap.com/wiki/display/VC/64Kbytelimit].
Hope that helps!
Best Regards,
Marcel

Sort and filter option missing in table view

Hi,
I am not able to see the sort and filter option for all the columns in table view. Could anyone please help me if i need to add something to see that option.
Thanks,
Kamesh Bathla

Hi,
Thanks for the reply, yes its web UI issue, i am having search and result view and i need sorting option for all the columns in result view. I thought that it is standard functionality, do i need to add something to html file or anyother place to see the sorting options?
Regards,
Kamesh Bathla

Shared services and Filter

Hi Guru's
how can i assign a filter to a group in shared services. I have created one group in shared services and filter in EAS.Do i have to click on export to shared services ? where in shared services will i see my filter to make it effective on the group
thank you

Hi,
Refer to this thread. The same was discussed there...
Re: Granting filters without writing maxl

Interpreting Predicate and Filter information from the explain plan

Can somebody help in understanding how does the predicate and filter operation effects the execution plan.or how can I conclude the predicate or filter operation chosen by optimizer is not optimized.

User445775,
The paraphrase that I provided in my previous post was from page 74 of "Cost-Based Oracle Fundamentals".
How to word the explanation...
Assume that you have a database table which contains all of the phone numbers and addresses for people in a state. A query is executed to find user445775 in the city named "Redmond". Assume that the query looks like this:
SELECT
PHONE
FROM
PHONE_NUMBERS
WHERE
CITY = 'Redmond'
AND FULL_NAME = 'user445775';Assume that there are no indexes on the table. The DBMS_XPLAN would show two filter predicates applied during a full tablescan - this probably indicates an inefficient access path, especially if there are a very small percentage of people matching the WHERE clause restrictions on the table.
Now, assume that an index is created on the CITY column. The DBMS_XPLAN would show an access predicate applied to the index on the CITY column, and a filter predicate on the table access by index for the FULL_NAME. We eliminated a large number of possible rows by applying the access predicate to jump directly to the rows with the city of interest, and then filtered out those names which were not 'user445775'. This is not terribly efficient, especially if there are a large number of people in 'Redmond' that need to be filtered out.
Now, assume that we drop the index on the CITY column and create an index on the FULL_NAME column. The DBMS_XPLAN would show an access predicate applied to the index on the FULL_NAME column, and a filter predicate on the table access by index for the CITY column. This could be a fairly efficient plan if there are only a couple rows in the table with FULL_NAME of 'user445775', as few rows will be discarded after the index access to find those with CITY = 'Redmond'.
Now, assume that we drop the index on the FULL_NAME column and create a composite index on CITY,FULL_NAME. The DBMS_XPLAN would show an access predicate applied to the index on the CITY and FULL_NAME columns and there would not be a filter predicate on the table access by index - in this case, we will not discard any rows once retrieved by the index access.
Page 211 of "Troubleshooting Oracle Performance" also shows a clear explanation of access and filter predicates.
Think of access predicates (on indexes at least) as throwing out rows before they are retrieved from disk (or memory), and filter predicates as throwing out rows after they are retrieved from disk (or memory).
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.

How to hide Print and Filter option from dynamic ALV

Hi,
I have created the dynamic ALV. now User don't wan't Filter , export,print Option on the ALV dispaly.
Could you please tell me How to hide Print and Filter option from dynamic ALV.
Thanks and regards
Amita.

Hi,
Please go through the following link to get an better idea on ALV.
[https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/1190424a-0801-0010-84b5-ef03fd2d33d9&overridelayout=true]
This is the code which you have to write in WDDOINIT
DATA LO_CMP_USAGE TYPE REF TO IF_WD_COMPONENT_USAGE.
LO_CMP_USAGE =   WD_THIS->WD_CPUSE_ALV_TEST( ).
IF LO_CMP_USAGE->HAS_ACTIVE_COMPONENT( ) IS INITIAL.
LO_CMP_USAGE->CREATE_COMPONENT( ).
ENDIF.
DATA LO_INTERFACECONTROLLER TYPE REF TO IWCI_SALV_WD_TABLE .
      LO_INTERFACECONTROLLER =   WD_THIS->WD_CPIFC_ALV_TEST( ).
        DATA LO_VALUE TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
        LO_VALUE = LO_INTERFACECONTROLLER->GET_MODEL(
lo_value->IF_SALV_WD_STD_FUNCTIONS~SET_EXPORT_ALLOWED( abap_false ).
lo_value->IF_SALV_WD_STD_FUNCTIONS~SET_PDF_ALLOWED( abap_false ).
lo_value->IF_SALV_WD_STD_FUNCTIONS~SET_VIEW_LIST_ALLOWED( abap_false ).

What is source system and open hub destination?

Hello,
Kindly tell me In BI data modeling workbench ,in modeling there is are two areas name as "Source system" and "Open Hub destination".What is mean by this???How we use it in BI?

Hi,
Source system as the name suggests mentions the source of data. The place from where you are extractin data to BW.
http://help.sap.com/saphelp_nw2004s/helpdata/en/7a/27bcf087c7464db8b95eaa717b6e6a/content.htm
OpenHub is for exporting data out of BW.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11e1b990-0201-0010-bf9a-bf9d0ca791b0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3042c5fc-21a8-2910-c79e-ad530260ae2e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01d3a090-0201-0010-9783-bc
http://help.sap.com/saphelp_erp2005vp/helpdata/en/bf/50453c01f4f75fe10000000a11402f/frameset.htm
Thanks,
JituK

How to implement row span and column span in JTable.

Hi,
How do we implement Col span and row span in JTable as in Html.
Kindly help.
Thank You

Although I suppose you could extend JTable to support column and row spans, this would involve a lot of of work and quite a few hacks. I think you will be better off either creating a new custom JComponent with an appropriate model for this purpose or using an existing solution such as [JIDE Grids|http://www.jidesoft.com/products/grids.htm] which includes a CellSpanTable.

How to Use and Filter Table contents after execution of Bapi

Can anybody guide me how to Use and Filter the table Contents which i got after successful execution of a Bapi
I used Component Controller in my Project
Ex: My table contains Redundant data for a single column but i want to display the column contents with out Redundancy
Name
Raghu
Raghu
Raghu
Debasish
Debasish
I want to filter the table contents and i want to display the table with out Redundancy
and Even when i am using a Dropdown i selected a Column from a Table as the values for that Dropdown but that table is having redundant data and the same data is getting displayed in that Dropdown i want the Dropdown to display data with out redundancy
Thanks

I also got that problem recently and after debuging for a while I figured out, that it was resulting from an error in my table's model: When the model received new items to display I
1.) Fired an delete event for the old items
2.) Fired an insert event for the new items
Problem was that when firing the delete event I didn't already assigned the new items to the model. Therefore it had still the old row count.
Maybe you have also a faulty table model?...

Difference between Restricted KeyFigure and Filter

Hi Experts
Could anyone tell me what is the main difference between Restricted Keyfigure and Filter.. Normally in which scenario we will use Restricted Key Figure and when we will use in Filter...
Thanks
Ajay

Restricted Key Figure
In your sales analysis report you have customer,material,sales qty,value for an year..You want to show current month sales one more column.You will create a restritcted key figure based on the current month and show it in the report.You will end up with a report
customer,material,sales qty,value,Current Month Qty,Current Month value.
Filters
The above report you want to show only the current month sales.You will create a filter where the 0CALMONTH = current Month with customer,material,sales qtym,value for the current month only.
Regs
Gopi

Define Logical Port and Back-End Destinations for ESOA use of this config

Hi,
Please let me know what is the use of this config I am not able to get a documentation.
Define Logical Port and Back-End Destinations for ESOA

Hi Autobots,
Even I am looking for the same information. Did u get some headstart into the matter?
Pl provide me with the inputs too.
Cheers
Nikhil

IDSM SPAN and filter on destination

Similar Messages

Maybe you are looking for