IDSMC 2.0.1 How to see the total IDS Events in Database
If I:
1.
In "Security Monitor" - "Data Management" - "Database" - "Rules" specify a trigger condition "Notify via e-mail" and set the trigger action "Total IDS events in database exceed" to 50000
2.
Then in the "Security Monitor" - "Monitor" - "Events" - Lanch Event Viewer with "Event Start Time" set to "At Earliest".
3.
And deletes all events from database. Then after a while the trigger action for 50000 IDS events is triggered and send the e/mail notification even though I only see a few thousand event in the in the Security Monitor.
4. Is this a bug (that the Security Monitor only show a few thousand events) or is the another way to see the total number of IDS events in the database ?
Thanks
Gert
This document should explain it better,
http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/mon_sec/secmon20/ug/ch04.htm#wp322337
Similar Messages
-
How to see the total imports purchase.
Hi,
We want to see the Value of Imports Purchase,
Please suggest the T Codes. Does the Values includes the Customs Duty & othe chrages like Insurance, CHA.
Regards,Hi,
Thanks for the reply.
We have explored the TCode MC$G and here we are getting the amonut related with Purchase/ GR & Invoice.
ME89 also gives us the PO Qty & Value (without duties).
Regards, -
How to see the number of events per second received by MARS
Hi,
I have a MARS installed in a client for demonstration porpuse. Is there a way for me to see how many events per second has the MARS received?
Like in the access-list's logs when even if it can not log due the rate limit it says "missed 20 packets due rate limit".
So maybe the MARS can not process all the events, but it can say how many events it received per second in avarege.go to admin->system maintenance->view log files and look for message rate
-
How to see the Open PO Qty in Mass
Dear Experts,
How to see the Open Qty in PO in mass, is there any report available..Please help
Regards
karthikuse the Txn ME2N
Enter the follwoing details . Scope of list - ALV, Selection parameters- WE101, Plant- XXXX, Enter the document dates From and TO and execute ( F8), You will get all the details, If you want to adjust the format use cntrl+F8 to get the POP_up for selection of fields and use as you wish. -
How to see the balance under different balance if special ledgers exist???
Some of the company using special ledgers. I need to teach user how to see the balance under different balance.
I will focus on
1. display voucher
2. check GL balance
Anyone have idea (detailed flow)/template (preferred) on these issues?
Thanks a lot for your help in advancehi,
/n----
> acccounting -
>financial accounting -
>GL acccounts -
> information system -
> gl reports
here in this path u can get all the gl list and gl balances list ....
u can check what ever reports u want.....
if useful assign points...
regards,
santosh kumar -
How to see the print preview of outgoing excise invoice.
Hi Experts,
How to see the print preview of outgoing excise invoice.
Thanks,
srinivas.Dear Sreeni,
Just go to J1IIN, click on "Exc.inv for delivery -- Display" where you input delivery reference and execute. If you have generated excise invoice, you can see the corresponding excise invoice for that delivery / billing document.
Preethi. -
I have installed iBooks on both my iMac (main library) as well as on my iPad Mini Retina. I can't seem to find where to see the total number of books in each library? Can anyone enlighten me please? I can see the covers, lists etc. but nowhere how many books I have total in each library (Total: X number of books stored) or something like that. Can someone point me where this information is viewable?
Did you have 'find my iPhone' activated on it? Because if you go to iCloud.com you can log in there and you can remotely lock or wipe your device. From what I hear, the police won't do anything about going and fetching stolen iPads and iPhones, but if you have find my iphone/ipad/ipod/mac turned on then it will give you a map of where it is.
Just keep in mind that sometimes iTunes does ask you for your password regardless, and only a few weeks ago apple brought in security questions, so everyone had to fill in security questions for their iTunes account to make it more secure If all else fails, ring Apple cusomer support and they might be able to bar your account or something, however you may have to make a new account (the might be able to set it up so you have all your previous information on a new account)
Hope this helps! -
How to see the object while moving on the artboard?
hello everyone;
maybe a silly question; how to see the object while moving on the artboard? i dont wanna see only the objects bounding box(outline of the object). i wanna see the object it self. thank you.What have they gone and messed up now?
When I drag an object (with bounding boxes turned on), the object moves and the bounding box stays still until I stop dragging, upon which it snaps to the object’s new position.
If I don’t have bounding boxes turned on (as I usually work), the object moves when dragged.
If what Bedri says is right, they’ve gone and mended something that wasn’t busted. -
How to see the ouput of a purchase order on screen??
Hi all , how to see the output of a purchase order (ME23) on screen?
Points will be awarded!!!!
Thanks & Regards
JohnHi,
If any output tye is associated to PO and it is been triggered then User ME9F tocde to view the output.
To check thise first Use: ME23 and click on Messages, if any outputs are triggered and they are in Yellow status then Use ME9f. Once you execute you will get Outputs in the screen, then choose the output and click on Display Message button. Your output will be displayed on the screen.
Regards,
Ashok -
How to see the change logs for billing document
Dears,
Could you please how to see the change logs for billing document.
My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
Thanks in advance
Ranjanhello, friend.
you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes. try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document, as saving the document after creation will post this to Accounting. of course, inclusion of a posting block in the billing type will provide you the opportunity for changes.
regards. -
hi every body...
i want to get the result of any table..
for ex: select * from dept;
the o/p should be like(10~Accounts~new york)
for this i wrote this code.... it run sucessfully;
my prob is how to see the Result..
declare
tn varchar2(35);
sqlstmt varchar2(2000);
rc sys_refcursor;
begin
tn := '&tn';
sqlstmt := 'select * from '||tn;
open rc for sqlstmt;
end;
post u r comments,Hints and suggestion...post u r comments,Hints and suggestion...
SQL> var rc refcursor
SQL> begin
2 open :rc for 'select * from &tn';
3 end;
4 /
Enter value for tn: emp
old 2: open :rc for 'select * from &tn';
new 2: open :rc for 'select * from emp';
PL/SQL procedure successfully completed.
SQL> print rc
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7369 SPENCER CLERK 7902 17-DEC-80 800 20
7499 VERREYNNE SALESMAN 7698 20-FEB-81 1600 300 30
7521 VAN WIJK SALESMAN 7698 22-FEB-81 1250 500 30
7566 MAINGUY MANAGER 7839 02-APR-81 2975 20
7654 KISHORE SALESMAN 7698 28-SEP-81 1250 1400 30
7698 BARRY MANAGER 7839 01-MAY-81 2850 30
7782 BOEHMER MANAGER 7839 09-JUN-81 2695 10
7788 PADFIELD ANALYST 7566 09-DEC-82 3000 20
7839 SCHNEIDER PRESIDENT 17-NOV-81 5500 10
7844 GASPAROTTO SALESMAN 7698 08-SEP-81 1500 0 30
7876 CAVE CLERK 7788 12-JAN-83 1100 20
7900 CLARKE CLERK 7698 03-DEC-81 950 30
7902 JAFFAR ANALYST 7566 03-DEC-81 3000 20
7934 ROBERTSON CLERK 7782 23-JAN-82 1430 10
109 JOMAR 30
8800 VISWARAYAR INTERN 7934 03-OCT-82 0 10
16 rows selected.
SQL> Cheers, APC
Blog : http://radiofreetooting.blogspot.com/ -
How to see the list of purchase order
hi,
Please kindly guide me how to see the list of purchase order released and unreleased both.
Regards,
SanchitaHi
Check it out in Tcode ME2N
Menu bar - Edit -Dynamic selections - Purchasing document header - Release status.
Check it out.
Thanks
Raman -
How to see the changes made for iPad in iTunes on my iPad?
How to see the changes made for iPad in iTunes on my iPad? I've been transferring some pdf-files and changed the name on them in iTunes under the index books for my iPad device, but the changes do not show in iBooks-PDF. What to do?
Yes I tried syncing a lot of times, but the changes still wouldn't show, so I did as you said by beginning from the start by adding the PDF's once again.
Thanks for your help, it works now :-) -
How to see the MM invoice changes in sap?
Hi
How to see the MM invoice changes in sap ?Dear Prashant,
When ever we perform LIV and is blocked for payment (due to price variance or other variance) is stored on table RBKP_BLOCKED
Now when we release it through t. Code MRBR that time its get deleted from RBKP_BLOCKED
So you can always track it :
Go to ->SE16 ->Enter table name CDHDR -.>Table contents (F7)
In the selection screen enter
OBJECTCLAS as INCOMINGINVOICE
OBJECTID as =Invoice no+year (e.g 51056066022011 where is 5105606602 invoice no 2011 is year)
TCODE as MRBR
->Execute
You will find the details when it was released Date ,Time, User ID etc
Edited by: redriver on Dec 26, 2011 2:23 PM -
How to see the customer purchase order acknowledgement ?
How to see the customer purchase order acknowledgement ?
in that PO ACK where we see the UOM and Qty ?
thanks & regards,
Srikanth.hi
Customer Purchase Order is nothing but the Sales Order in your system
Customer Po acknowledgement is nothing but the Acknowledgement that is sent out (output type BA00) to the Customer after the Sales Order has been created.
Note: Purchase is to Customer - Sales is to you as the Vendor.
cheers
Nandu
Edited by: Nanda Kumar Veeraraghavan on Apr 1, 2008 12:11 AM
Maybe you are looking for
-
For loop stop in sub vi from main vi?
Hi! I want to control from my main vi a sub vi consisting of a stepped sine function generator. This sub vi has a for loop. The problem is that I want to have the option of terminating the loop in the sub vi from the main vi. I tryed using global var
-
Keeping songs on ipod no longer on my itunes harddrive
can i keep songs on my ipod that i have deleted off my itunes account on my harddrive because i ran out of space on my harddrive. note that i have the 60 GB ipod and my computer does not have that much capacity.
-
Hi All I have just bought an iPhone and I am really confused about the Mail side of things and was hoping someone could put me straight. I use Apple's mail client into POP3 accounts and .Mac mail. Before I had the iPhone I had my POP3 email set in in
-
Populating select-options in the main view
hi i have two views. main screen and view1. in main i have created a selection screen with 6 fields. view1 also has selection screen and same fields in it. when i go to view1 and click on ok button, i need to comeback to main view and populate the se
-
"/System/Library/Extensions/PACESupport.kext"
After finally installing Snow Leopard today and updating to 10.6.4, I've been getting this error message appear sporadically: System extension cannot be used. The system extension "/System/Library/Extensions/PACESupport.kext" was installed improperly