Idsync with LDAP replication

I have 2 LDAPs set up in a replication. LDAP2 is the failover for LDAP1. Will I be able to set up password synchronization on both of them from a single AD?
The need is if LDAP1 goes down, LDAP 2 should be able to server the apps along with the synchronization taking place. Has anyone done this setup.

Similar Messages

Messaging services with ldap replication

using JES2004_q2
Every single component is working fine. Now I am trying to establish the replication with other LDAP for user data. To achieve this I deleted the current ou=People and ou=Groups under my default domain o=xyz.com. And created and initialized NewSubsuffix with the same data for ou=people and ou=Groups under the o=xyz.com on configuration>data.
Replication is working fine with other ldap and as well the search. But messaging is not. On imsimta test come out �5.1.1 unknown or illegal alises� but I can see the user entry in search also I can see the entry msg-admin-test.xyz.com-20040824154024Z, which is required to host the domain and run the messaging services.
Any idea why messaging is not working?

As I indicated replication and search for user entry is working fine as we can see all attributes for entry.
Acess logs at directory server is like that when I try to run ./imsimta test
30/Aug/2004 12:25:00 -0500     86     113     115     RESULT err=0 tag=101 nentries=1 etime=11
30/Aug/2004 12:25:00 -0500     86     108     110     RESULT err=0 tag=101 nentries=1 etime=14
30/Aug/2004 12:25:00 -0500     86     114     116     SRCH base="cn=config" scope=0 filter="(|(objectClass=*)(objectClass=ldapsubentry))" attrs="nsslapd-accesslog nsslapd-accesslog-list"
30/Aug/2004 12:25:00 -0500     86     114     116     RESULT err=0 tag=101 nentries=1 etime=0
30/Aug/2004 12:25:00 -0500     86     112     114     RESULT err=0 tag=101 nentries=1 etime=12
30/Aug/2004 12:25:00 -0500     86     115     117     SRCH base="cn=config" scope=0 filter="(|(objectClass=*)(objectClass=ldapsubentry))" attrs="nsslapd-maxdescriptors nsslapd-reservedescriptors"
30/Aug/2004 12:25:00 -0500     86     115     117     RESULT err=0 tag=101 nentries=1 etime=0
30/Aug/2004 12:25:05 -0500     88     -1     -1     fd=59 slot=59 LDAP connection from 10.0.17.254 to 10.0.17.254
30/Aug/2004 12:25:05 -0500     88     0     1     BIND dn="cn=msg-config, cn=Sun ONE Messaging Suite, cn=Server Group, cn=testwebmail.xyz.com, ou=fsl.org.jm, o=NetscapeRoot" method=128 version=2
30/Aug/2004 12:25:05 -0500     88     0     1     RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=msg-config,cn=sun one messaging suite,cn=server group,cn=testwebmail.xyz.com,ou=fsl.org.jm,o=netscaperoot"
30/Aug/2004 12:25:05 -0500     88     1     2     SRCH base="cn=configuration,cn=msg-config,cn=sun one messaging suite,cn=server group,cn=testwebmail.xyz.com,ou=fsl.org.jm,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
30/Aug/2004 12:25:06 -0500     88     1     2     RESULT err=0 tag=101 nentries=31 etime=1
30/Aug/2004 12:25:06 -0500     89     -1     -1     fd=63 slot=63 LDAP connection from 10.0.17.254 to 10.0.17.254
30/Aug/2004 12:25:06 -0500     89     0     1     BIND dn="cn=msg-config, cn=Sun ONE Messaging Suite, cn=Server Group, cn=testwebmail.xyz.com, ou=fsl.org.jm, o=NetscapeRoot" method=128 version=2
30/Aug/2004 12:25:06 -0500     89     0     1     RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=msg-config,cn=sun one messaging suite,cn=server group,cn=testwebmail.xyz.com,ou=fsl.org.jm,o=netscaperoot"
30/Aug/2004 12:25:06 -0500     89     1     2     SRCH base="cn=configuration,cn=msg-config,cn=sun one messaging suite,cn=server group,cn=testwebmail.xyz.com,ou=fsl.org.jm,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
30/Aug/2004 12:25:06 -0500     89     1     2     RESULT err=0 tag=101 nentries=31 etime=0
30/Aug/2004 12:25:06 -0500     89     2     3     UNBIND
30/Aug/2004 12:25:06 -0500     89     2     -1     closing - U1
30/Aug/2004 12:25:07 -0500     89     -1     -1     closed.
30/Aug/2004 12:25:12 -0500     88     -1     -1     closing - B1
30/Aug/2004 12:25:12 -0500     88     -1     -1     closed.
30/Aug/2004 12:25:23 -0500     90     -1     -1     fd=59 slot=59 LDAP connection from 10.0.17.254 to 10.0.17.254
30/Aug/2004 12:25:23 -0500     90     0     1     BIND dn="uid=msg-admin-testwebmail.xyz.com-20040727154027Z, ou=People, o=fsl.org.jm,o=fsl.org.jm" method=128 version=3
30/Aug/2004 12:25:23 -0500     90     0     1     RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=msg-admin-testwebmail.xyz.com-20040727154027z,ou=people,o=fsl.org.jm,o=fsl.org.jm"
30/Aug/2004 12:25:23 -0500     90     1     2     SRCH base="o=fsl.org.jm" scope=2 filter="(&(objectClass=sunManagedOrganization)(|(associatedDomain=testwebmail.xyz.com)(sunPreferredDomain=testwebmail.xyz.com)))" attrs=ALL
30/Aug/2004 12:25:23 -0500     90     1     2     RESULT err=0 tag=101 nentries=0 etime=0
30/Aug/2004 12:25:23 -0500     90     2     3     SRCH base="o=fsl.org.jm" scope=2 filter="(&(objectClass=sunManagedOrganization)(|(associatedDomain=fsl.org.jm)(sunPreferredDomain=fsl.org.jm)))" attrs=ALL
30/Aug/2004 12:25:23 -0500     90     2     3     RESULT err=0 tag=101 nentries=0 etime=0
and when I try to loging via http. I can see these error on http loggong under messaging server
[30/Aug/2004:12:31:50 -0500] testwebmail httpd[10960]: Account Notice: [10.x.x.x:2075] domain not found
[30/Aug/2004:12:31:50 -0500] testwebmail httpd[10960]: Account Notice: badlogin: [10.x.x.x.:2075] plaintext testuser : user not found
consumer ldap is not using messaging so we don't need to do the replication of PAB
I know Configuration data is tricking. After deleting the ou=People and ou=Groups under o=xyz.com I can see these ou but once I created these as subsuffix under o=xyz.com I can see the entry for ou=People and Ou=Groups with all the intialized entries under Directory tab > o=xyz.com

Messaging services with ldap replication again

Dear at_bajwa and fslaat ,
My case is similar the following forum:
http://swforum.sun.com/jive/thread.jspa?forumID=15&threadID=47877
I folllowing but still cant successful,
could you mind give me more detail step on MMR !!!
Thanks
epee

To the original poster,
First, determine how much downtime is acceptable and then determine what your DR plan should be.
Trying to make a "hot" standby mailserver is a not an easy task. What I would do is just do a complete backup of the current system and load a standalone machine. Then, from that time forward, all you really need to restore are the DS data directory and the mailstore itself. When ever you do a system change, ie patches, then do another level 0 dump and restore to the backup box. If the primary box crashes, restore your latest mailstore and DS data tapes to the backup box, plug it into the network and you're up and running.
For a fairly small mailstore, you could probably run rsync (remote filesystem sync utility) to a third machine, so you always have a fairly recent copy of the mailstore.
Once you have that procedure in place, you now know your DR recovery time. If that is unacceptable, then the next step is probably using Sun Cluster 3.x. But now, you're talking big $$$ for a dual-hosted disk array and supported servers and network hardware.
The time to recover and your tolerable data loss will determine how much you spend. The smaller those numbers, the more it will cost.
One of my lessons learned, run 'mboxutil -l ' on a regular basis (at least nightly) and save it to a file. That list of folders has saved me a lot of grief over the past months. I have users who constantly misplace /rename/delete folders. It's a lot quicker than messing around with backup tapes to find out which folders did or didn't exist.
HTH,
Roger S.

Automatic upload of roles from ECC to portal (UME with LDAP)

Hi experts,
This thread reopen the question asked on the following message : automatic upload of roles from BI to portal
However, it concerns this time "UME with LDAP".
Problematic :
SAP Library 04s tells us that is not yet possible to automate role replication (or role assigment replication) from ABAP Based back-end to Netweaver Portal. Only manual process for initial upload is possible.
Source = http://help.sap.com/saphelp_nw04s/helpdata/en/41/5e4d40ecf00272e10000000a155106/frameset.htm
Questions :
1 - Did anyone ever try to implement such an automatic tool ?
2 - What if I'm not able to write on the Active Directory ? I am still able, at least, to automate role assignment replication from ABAP Based back-end to Netweaver Portal (ie. UME with LDAP) ? Directly from SAP R/3 to EP through UME, without passing through Active Directory since the group field is not maintained in AD.
Many thanks for your inputs
Alexis MARTIN

Hello,
As I did not read the previous thread I don't know what exactly you are trying to achieve, but I can tell you about what we have done - as far as it is not too late yet.
We use the portal with integration to a BI system. In the ABAP stack we have lots of roles with menu items for hundreds of reports. We want the users to see these roles in the portal.
First we have used the role migration tool of the portal to upload these roles. There is a Java API for executing role uploads from code. You need to create a webservice in the java stack to call this api, and can call the webservice from ABAP.
However it is just a question of time and role size until this will not work at all. Standard role migration is more or less crap, stability is a problem. It also creates a lot of logs in the PCD and thus fills the database with trash. (After a few OSS messages there is now a program for deleting logs + you can turn of logging.) Also upload of larger roles takes up to an hour, and you alwasy have the problem that your portal roles are not up to date during the day.
When I got completely fed up, I have implemented an own navigation connector. When you log on to the portal it will connect to the ABAP stack via RFC, load the role, and generate the portal menu from it. It uses caching, but on every logon it checks whether the role has been updated in ABAP since the last time it was loaded. It is up to date, faster then PCD navigation, and you need absoluetely no periodical synching at all. I cant even understand why this is not offered by SAP per standard!
Drawback is that it will of course only work for the menu items, and only menu items with an "URL-type" are supported. I'm prettry sure however that it would be possible to implement a few other types as well.
Let me know if you are interested in the solution, I can give you a few additional details: oliverDOTsvisztATwienerbergerDOTcom
Oliver

Oracle Cluster 3.3 with LDAP agent

Dear Experts
I am trying to install Sun cluster 3.3 u1 with LDAP 6.3 but I failed and Now i will try for LDAP 7.0 .
Anyone has experiance on this and why is failing?
I heard that LDAP can be ACTIVE-ACTIVE without cluster ? Is it correct ?
Thanks
Ehab

Please see Marcos post...
<Comments>
In terms of application deployment, regardless the ODSEE/OUD version you'll choose, I would strongly recommend you to avoid the old approach of O.S. clustering; application level clustering (Multi-Master replication, available for more than 10 years!) is much more reliable.
HTH,
marco
</Comments>
For reference
Sun Directory Server Enterprise Edition 7.0 Evaluation Guide
Chapter 3 High Data Availability and Integrity
http://docs.oracle.com/cd/E19424-01/820-4812/6ng8j0mpt/index.html
Sun Directory Server Enterprise Edition 7.0 Reference
Chapter 7 Directory Server Replication
http://docs.oracle.com/cd/E19424-01/820-4811/fnysf/index.html
Sun Directory Server Enterprise Edition 7.0 Administration Guide
Chapter 10 Directory Server Replication
http://docs.oracle.com/cd/E19424-01/820-4809/fhkry/index.html
thanks,
scott

Untrusted server cert chain - while connecting with ldap

Hi All,
I am getting the following error while running a standalone java program in windows 2000+jdk1.3 environment to connect with LDAP.
javax.naming.CommunicationException: hostname:636 [Root exception is ja
vax.net.ssl.SSLException: untrusted server cert chain]
javax.naming.CommunicationException: hostname:636. Root exception is j
avax.net.ssl.SSLException: untrusted server cert chain
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(DashoA12
275)
at com.sun.net.ssl.internal.ssl.Handshaker.process_record(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(DashoA12275)
at java.io.OutputStream.write(Unknown Source)
at com.sun.jndi.ldap.Connection.<init>(Unknown Source)
at com.sun.jndi.ldap.LdapClient.<init>(Unknown Source)
at com.sun.jndi.ldap.LdapCtx.connect(Unknown Source)
at com.sun.jndi.ldap.LdapCtx.<init>(Unknown Source)
at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(Unknown Source)
at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
at javax.naming.InitialContext.init(Unknown Source)
at javax.naming.InitialContext.<init>(Unknown Source)
at javax.naming.directory.InitialDirContext.<init>(Unknown Source)
at Test2.getProxyDirContext(Test2.java:66)
at Test2.main(Test2.java:40)
Any help would be appreciated
Thanks in Advance
Somu

This got resolved when in the code the following
System.setProperty("javax.net.ssl.tmrustStore", CertFileName);
where cert file name is the filename with complete path.the file is a CA certificate of the LDAP server
in X509 format

Problem with LDAP in BEA Portal

Problem with LDAP in BEA Portal
I have a list of 50 user which should be cerated in portal staging(devlopment) machine and should be transfered to
production machine using LDAP
Steps which i followed to create Users
1.Create User Profile with 2 parameters branch and Role
2.I have list user in the Xls file with Username,password ,branch and Role
3.Write a java File which will read the Xls File
4.The users are created in the staging machine for the portal
Steps which i followed in LDAP to tranfer the created User form Devlopment to Production
1.Export the created user from Devlopment (which was moved as .DAT in my local directory)
2.import the user from local direcory to production machine
The Users are imported in the production machine with username and password but the role and branch values are empty
We need a solution for importing the user with role and branch corresponding to each user.
Thanks in Adv
Suresh

In Portal 8.1, user name and password in stored in LDAP where as user profile values are stored in database. That is the reason you are not able to see the user profile values.
Check once again whether you can see these values through admin tool. In case,it is not(after confirmation again),you might have to use APIs to do this for you incase you dont want to manage through Admin Tool.
Thanks,
Prashanth Bhat.

Error in authentication with ldap server with certificate

Hi,
i have a problem in authentication with ldap server with certificate.
here i am using java API to authenticate.
Caused by: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: timestamp check failed.
I issued the new certificate which is having the up to 5 years valid time.
is java will authenticate up to one year only?
Can any body help on this issue...
Regards
Ranga

sorry i am gettting ythe same error
javax.naming.CommunicationException: simple bind failed: servername:636 exception is javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: timestamp check failed]
here when i am using the old certificate and changing the system date means i can get the authentication.
can you tell where we can concentrate and solve the issue..
where is the issue
1. need to check with the ldap server only
2. problem in java code only.
thanks in advance

Problem with users in portal - login conflict with LDAP.

Hi.
Let me describe our problem:
We've a EP5 portal with LDAP conected to a central LDAP server, users access with the same user and password to all the different systems.
The problem happens to users who have theyr passwords expired. We already set to 0 the password expiration days to avoid future problems but that didn't applied to the already expired ones.
This affected users cannot change the password due to problems with the connection rights to LDAP server.
We're trying to find the place there it's set that the user is in some kind of "password expired" status, directly in a database table if neccesary, to change the status manually, as system does not allow os to set it by user administration in portal.
Any suggestions would be appreciated.

Restoring expired Portal passwords
Solved

EDSPermissionError(-14120) problems with LDAP, SSL and Directory Utility

Hello everyone,
Apologies for the repost but I think I may have made a mistake by posting this originally in the Installation, Setup and Migration forum instead of the Open Directory forum. At least I think that may be why I didn't receive any responses.
Anyway, I've been trying to get my head around Open Directory and SSL as they are implemented in Mac OS X Server 10.5 Leopard, and have been having a few issues. I would like to set up a secure internal infrastructure based around a local Certificate Authority that signs certificates for other internal services like LDAP, email, websites, etc.
I only have one Mac OS X Server and it is kind of a small office so I have gone against best practice and simply made it a CA (through Keychain Utility). I then generated a self-signed SSL certificate through Server Admin, and used the "Generate CSR" option to create a Certificate Signing Request. This went fine, but I did have some problems signing it with the CA, because the server documentation suggested that once I signed it it would pop open a Mail message containing the ASCII version of the signed certificate - it did not, and it took me a loooong time to realize that I could simply export the copy of the signed certificate it put in my local Keychain on the server as a PEM file and paste this back into the "Add Signed or Renewed Certificate from Certificate Authority" dialog box in Server Admin. Hopefully this can be fixed in a forthcoming patch, but I thought I would mention it here in case anyone else is stuck on this issue.
Once I did this I was able to use this certificate in the web server on the same machine and sure enough I was able to connect to it with with clients who had installed the CA certificate in their system Keychains without getting any error messages - very cool.
However, I haven't had quite as much luck getting it going with LDAP/Open Directory. I installed the certificate there as well, but have run into a number of problems. At first I could not get clients (also running 10.5.2) to talk to the server at all over SSL, receiving an error in Directory Utility that the server did not support SSL. I eventually discovered that the problem seemed to lie in the fact that the OpenLDAP implementation on Leopard is not tied in with the system Keychain, necessitating some command-line voodoo to install a copy of the CA cert in a local directory and point /etc/openldap/ldap.conf at it, as documented here: http://www.afp548.com/article.php?story=20071203011158936
This allowed me to do an ldapsearch command over SSL, and seemingly turn SSL on on clients that were previously bound to the directory, and additionally allowed me to run Directory Utility on new clients and put in the server name with the SSL box checked and begin to go through the process of binding. Once this seemed to work, I turned off all plaintext LDAP communication and locked down the service by checking the "Enable authenticated directory binding," "Require authenticated binding," "Disable clear text passwords," and "Encrypt all packets" options in Server Admin. However, I am now running into a new problem, specifically that I cannot successfully bind a local account to a directory account over SSL.
Here's what happens:
1) I run Directory Utility, (or it auto-runs) and add a server, typing in the DNS name and clicking the SSL box.
2) I get asked to authenticate, and type in user credentials, including computer name (incidentally, should this be a FQDN or just a hostname?)
3) Provided I put admin credentials in here and not user-level credentials, I get taken to the "Do you want to set up Mail, VPN, etc.?" box that normally appears when you autodiscover or connect to an Open Directory server.
4) I click through, and am asked for a username and password on the server, as well as the password for my local account.
5) When I put this information in, I get a popup with the dreaded "eDSPermissionError(-14120)" and it fails.
Checking the logs in Server Admin reveals nothing special, and while I have seen a couple other threads on this error and various other binding problems:
http://discussions.apple.com/thread.jspa?messageID=5967023
http://discussions.apple.com/message.jspa?messageID=5982070
these have not solved the problem. In the Open Directory user name field I am putting the short username. I have tried putting [email protected] and the user's longname but this fails by saying the account does not exist. For some reason it does seem to work if I bind it to the initial admin account I created, but no other user accounts.
If I turn all the encryption stuff off I am able to join just fine, so I am suspecting that the error may lie in some other "under the hood" piece of software that doesn't get the CA trust settings from the Keychain or the ldap.conf file, but I'm stymied as to which piece of software this might be. Does anyone have any clues on what I might be able to do here?
Thanks,
Andrew

Hard to tell what is happening without looking at the application
source, knowing what OS & hardware you're using etc. You might want to
try running with different JVM versions to see if it's actually the VM
that is the problem. If you have a support contract with BEA you could
ask support to help you diagnose this.
Regards,
/Helena
Ayub Khan wrote:
I have an application running on Weblogic 8.1 ( with JRockit as the JVM). This
application in turns talks to an iPlanet Directory server via LDAP/SSL. The problem
seems to happen on loading the machine..the performance progressively gets worse
and after a couple of seconds, all the threads stop responding. I checked the
heap, cpu and the idle threads in the execute queue and there is nothing there
to trigger alarms...there are quite a few idle threads still and the heap and
the cpu utilization seem OK. On doing a thread dump, Is see that all the other
threads seem to be in a state where they are waiting for data from LDAP and it
is basically read only data that they are waiting on.
Does anyone know what it is going on and help point me in the right direction.
-Ayub

LDAP/AD Role group user login issue in sharepoint 2010 FBA with LDAP

Hi.
I created sharepoint 2010 site with LDAP FBA.If I add the AD user as form based user and try to login to my site its working very well but if I add a AD Group in to my site and try to login with one of the AD user of this group its say "Access
Denied".
In my project we want add AD group in sharepoin Groups not a individual AD users.
Can anyone help me with this please its urgant?

I added both LDAP membership and LDAP Role provider.And I can also find groups in people picker in my Central Admin and FBA Web app site colleciton.
<add name="ADMembers"
type="Microsoft.Office.Server.Security.LDAPMembershipProvider, Microsoft.Office.Server, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71E9BCE111E9429C"
server="company.com"
port="389"
useSSL="false"
userNameAttribute="sAMAccountName"
userContainer="DC=company,DC=com"
userObjectClass="person"
userFilter="(|(ObjectCategory=group)(ObjectClass=person))"
userDNAttribute="distinguishedName"
scope="Subtree"
enableSearchMethods="true"
otherRequiredUserAttributes="sn,givenname,cn"
/>
<add name="ADRoles"
type="Microsoft.Office.Server.Security.LdapRoleProvider, Microsoft.Office.Server, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
server="Company.com"
port="389"
useSSL="false"
groupContainer="DC=Company,DC=com"
groupNameAttribute="cn"
groupNameAlternateSearchAttribute="samAccountName"
groupMemberAttribute="member"
userNameAttribute="sAMAccountName"
dnAttribute="distinguishedName"
groupFilter="(ObjectClass=group)"
userFilter="(ObjectClass=person)"
scope="Subtree" />

Issue with LDAP login authentication in CMC console

We have a existing issues with Business Objects BOE XIR2 SP2 and LDAP authentication with the BOE CMC Console.
We use websphere as the application server and it is installed on the same machine (Solaris) as BOE.
We have this issue on both our production and our recently rebuilt development environment to duplicate the issue.
Both environment have configured LDAP over SSL and we can login to BOE Infoview Reports with LDAP and we can map groups and users if we login to CMC but we can not login to CMC with secLDAP.
The specific error still being shown is "Security plugin error: Failed to set parameters on plugin".
Both environments (DEV and PROD) are fresh installs of BOE XIR2 SP2.
Any ideas are much appreciated
Thankyou

The CMC in XIR2 used com components for the SSL (rather than java like infoview) and I'm betting the WAS deployment is not finding them. Is WAS on a seperate server or is BOE installed there as well?
I'm not familiar with any regular fixes for an issue like this. If no other replies I'd recommend opening a case with either deployment(WAS on "nix") or authentication(WAS on windows) to see if they can trace down the problem.
Regards,
Tim

Install OCS 10.1.2 Infra DB failed with LDAP: error code 16 on Workspaces

during install OCS Infrastructure DB OCS have error:
... processed key-value: logfile=/oracle/product/dbocs/workspaces/logs/cw_config_backend.log
... processed key-value: action=setup_backend
... processed key-value: oh=/oracle/product/dbocs
... processed key-value: oid=oid.domain
... processed key-value: oid_port=389
... processed key-value: oid_user_dn=cn=orcladmin
... processed key-value: oid_passwd=xxxxxx
... processed key-value: db_sn=ocs.domain
... processed key-value: dba_user=sys
... processed key-value: dba_passwd=xxxxxx
... processed key-value: cw_db_passwd=xxxxxx
Attempting to set logfile to: /oracle/product/dbocs/workspaces/logs/cw_config_backend.log
Processed oh=/oracle/product/dbocs
BACKEND installation ...
... Trying to lookup database dn
... Obtain OID connection
...... Can not obtain OID ssl port.
...... OID port = "389"
...... Trying to establish a non-ssl connection. OID host "oid.domain", OID port "389", OID user dn "cn=orcladmin".
... OID connection created.
...... You must specify either db_dn or db_sn.
...... ldap search filter "(&(objectclass=orcldbserver)(orcldbglobalname=ocs.domain))"
...... Succesfully located database dn "cn=ocs,cn=OracleContext".
...... Database dn = "cn=ocs,cn=OracleContext"
... Validating existence and version of CW schema: "CWSYS" in database: "cn=ocs,cn=OracleContext".
... Obtain JDBC connect string
... JDBC connect string = "(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))"
...derived: "jdbc_str=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))".
Opening JDBC connection: "jdbc:oracle:thin:sys/xxxxxx@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))"
Opening JDBC connection: "jdbc:oracle:thin:sys/xxxxxx@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))"
Unlocking schema and setting passwd: "CWSYS/xxxxxx".
Opening JDBC connection: "jdbc:oracle:thin:sys/xxxxxx@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))"
... Checking Workspaces container.
... Container "cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext" already exist.
... Finish checking Workspaces container.
... Trying to create backend application entity in OID
...... Database dn = "cn=ocs,cn=OracleContext"
...... Backend entity name = "ocs"
...... Backend entity dn = "orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext"
... Backend entries already exist. Cleanup old entries.
deregisterProvisioningListener ...
app dn = orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext
subscriber = dc=domain,dc=com
... Trying to remove entity "orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext".
... Deleting "orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext"
Adding Workspaces application entity to: cn=Service Registry Viewers,cn=Groups,cn=OracleContext
Adding Workspaces application entity to: cn=Service Registry Admins,cn=Groups,cn=OracleContext
... Insufficient privilege to create application entity "orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext". Please check the user DN and password.
javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - One or more values for attribute uniquemember does not exist]; remaining name 'cn=Service Registry Admins,cn=Groups,cn=OracleContext'
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3009)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2934)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2740)
at com.sun.jndi.ldap.LdapCtx.c_modifyAttributes(LdapCtx.java:1373)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_modifyAttributes(ComponentDirContext.java:235)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:147)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:136)
at javax.naming.directory.InitialDirContext.modifyAttributes(InitialDirContext.java:136)
at oracle.workspaces.share.util.oid.OIDShareUtil.setEntryAttribute(OIDShareUtil.java:471)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroup(OIDShareUtil.java:420)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroupIgnoreDuplicateMember(OIDShareUtil.java:435)
at oracle.workspaces.install.CwConfigOID.createBackendEntity(CwConfigOID.java:1205)
at oracle.workspaces.install.CwConfigOID.registerBackend(CwConfigOID.java:449)
at oracle.workspaces.install.CwConfig.regBackend(CwConfig.java:320)
at oracle.workspaces.install.CwConfig.run(CwConfig.java:609)
at oracle.workspaces.install.CwConfig.main(CwConfig.java:790)
oracle.workspaces.install.CwCAException: Error while executing action: "setup_backend"
Caused by: javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - One or more values for attribute uniquemember does not exist]
at oracle.workspaces.install.CwConfig.run(CwConfig.java:639)
at oracle.workspaces.install.CwConfig.main(CwConfig.java:790)
Caused by: javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - One or more values for attribute uniquemember does not exist]; remaining name 'cn=Service Registry Admins,cn=Groups,cn=OracleContext'
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3009)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2934)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2740)
at com.sun.jndi.ldap.LdapCtx.c_modifyAttributes(LdapCtx.java:1373)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_modifyAttributes(ComponentDirContext.java:235)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:147)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:136)
at javax.naming.directory.InitialDirContext.modifyAttributes(InitialDirContext.java:136)
at oracle.workspaces.share.util.oid.OIDShareUtil.setEntryAttribute(OIDShareUtil.java:471)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroup(OIDShareUtil.java:420)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroupIgnoreDuplicateMember(OIDShareUtil.java:435)
at oracle.workspaces.install.CwConfigOID.createBackendEntity(CwConfigOID.java:1205)
at oracle.workspaces.install.CwConfigOID.registerBackend(CwConfigOID.java:449)
at oracle.workspaces.install.CwConfig.regBackend(CwConfig.java:320)
at oracle.workspaces.install.CwConfig.run(CwConfig.java:609)
... 1 more
javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - One or more values for attribute uniquemember does not exist]; remaining name 'cn=Service Registry Admins,cn=Groups,cn=OracleContext'
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3009)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2934)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2740)
at com.sun.jndi.ldap.LdapCtx.c_modifyAttributes(LdapCtx.java:1373)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_modifyAttributes(ComponentDirContext.java:235)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:147)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:136)
at javax.naming.directory.InitialDirContext.modifyAttributes(InitialDirContext.java:136)
at oracle.workspaces.share.util.oid.OIDShareUtil.setEntryAttribute(OIDShareUtil.java:471)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroup(OIDShareUtil.java:420)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroupIgnoreDuplicateMember(OIDShareUtil.java:435)
at oracle.workspaces.install.CwConfigOID.createBackendEntity(CwConfigOID.java:1205)
at oracle.workspaces.install.CwConfigOID.registerBackend(CwConfigOID.java:449)
at oracle.workspaces.install.CwConfig.regBackend(CwConfig.java:320)
at oracle.workspaces.install.CwConfig.run(CwConfig.java:609)
at oracle.workspaces.install.CwConfig.main(CwConfig.java:790)
What should i do?
help.
Thanks

closed
Re: Install OCS 10.1.2 Infra DB failed with LDAP: error code 16 on Workspac

External Authentication with LDAP

Has anyone integrated external authentication of Essbase with LDAP? I've searched discussion groups, websites with no luck, and of course, Essbase documentation doesn't help either. Any additional documentation will help.Thanks in advance!

Thanks for the info. Is this sample code part of the default implementation that comes installed with the product (essldap.dll)? Or is this something completely different.Also, has anyone done anything similar in visual basic? We have a shortage of v c++ skills around here.Thanks again!

RSA authentication with LDAP group mapping

Greetings,
I'm trying to set up RSA authentication with LDAP group mapping with ACS Release 4.2(1) Build 15 Patch 3.
The problem I'm having is that my users are in multiple OU's on our AD tree. When I only put our base DN in for User Directory Subtree on ACS, it fails with a "External DB reports about an error condition" error. If I add an OU in front of it, then it will work fine.
As far as I know, you can only use one LDAP configuration with RSA.
Any thoughts on this?

@Tarik
I believe your suggestion is the only way i'm going to get this to work. I ran across a similar method just this week that I have been working on.
I was hoping for dynamic mapping with the original method, but I haven't found any way to make it happen. I have resorted to creating a Radius profile on the RSA appliance for each access group I need. Using the Class attribute, I then pass the desired Group name to the ACS, i.e. OU=Admins, and that seems to work.
Thankfully, I have a small group of users that I am attempting to map. I will only map those who need elevated priviliges to narrow down how many profiles I will have to manually create. Likewise, our Account Admin will have to determine who gets assigned a particular access group.
I would still prefer to do this dynamically.
Scott

Idsync with LDAP replication

Similar Messages

Maybe you are looking for