IDT Audio ((((Missing Enhancements Tab )))) in Windows Sound Speaker Properties

I have owned a HP Pavilion G4 2129TX  core i7 3632QM windows 7 ultimate 64 bit.
last week, my computer crashed in a big way so I reinstalled Windows 7. I figured out all of my drivers and my Sound Works fine. The only problem is that I no longer have access to the   Enhancements Tab in my Windows Sound...
now my speaker seems too low in terms of sound not like as before.. my IDT driver is already updated but nothing changes. ..Any help to get it back would be appreciated.  

Hi,
Whether you have an enhancement tab in the Sound properties window depends on the particular audio driver loaded - some give this option and some don't.
Try the following.
First of all, uninstall your current IDT driver from its entry in Programs and Features and when done, restart the notebook.
When windows has fully reloaded, download and install the version on the following link.
http://ftp.hp.com/pub/softpaq/sp55501-56000/sp55977.exe
When the installation has completed, restart the notebook again before checking if the enhancements tab is now available.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • No "Enhancements" Tab in Windows 8, Recording Device Properties

    Hi, I just bought my HP laptop, a HP ENVY 15-q008TX, Windows 8.1. Whenever I'm using the microphone, I've found that the microphone automatically lowers its volume when it's too loud. It's obvious there's some auto-leveling going on in the background, be it by my audio driver or Windows. I don't want that and it's problematic when I'm recording audio for work.
    Searching for answers on the internet gave me these common answers:
    1) Turn off auto-audio adjustment in Skype -- Done. However, the auto-leveling issue I'm facing happens in other software, even when I'm not using Skype. So it's not a Skype issue.
    2) Go to Control Panel > Sound > Select "Do nothing" for communications activity. Done, but issue persists.
    3) Go to Control Panel > Sound > Recording Devices > Properties > Advanced > Unselect "Allow applications to take exclusive control of this device". Done, but issue persists.
    4) The last solution I've found is to go to the "Enhancements" tab of Speakers Properties AND Microphone Properties and check "Disable all sound effects". This sounds like a possible solution except that my Windows 8.1 has no Enhancements tab at all for both Speaker and Microphone Properties.
    I then tried checking the Beats Audio Control Panel (that's the audio software my laptop came with) which has barely any options.
    In the "Listening Experience" tab, it doesn't show any auto-leveling option. 
    In the "Recording Experience" tab, it asks me to attach audio device when my headset microphone is clearly attached and it's working and detected by my Windows and other software.
    So at this point I don't know what to do. I suspect there's some audio software issue going on. Any advice is appreciated.

    I do not have any issue connecting a microphone. That connecting error in the screenshot seems to be something wrong with the Beats software itself than any issue between my microphone and the HP laptop.
    To clarify:
    1) My microphone works perfectly and it shows up in Windows Control Panel.
    2) I have used my microphone over Skype with no issues.
    3) I have recorded many audio recordings with my microphone with no issues.
    Where I do have an issue with the microphone, as I have outlined in my original ticket, is that there seems to be an autoleveling or loudness equalization going on where any input audio that goes beyond a certain volume will automatically be softened for 10 seconds, before the microphone increases volume again. I have found this issue reported many times in other forums and apparently it's a common issue, and the solution seems to be to disable the loudness equalization in my Speaker/Mic properties in my audio control panel.
    The issue here is that I cannot find this option to disable loudness equalization at all in my audio control panel, be it in Windows or in Beats audio panel (as I have cited in my original ticket). I would like some help to know where exactly I can find and disable the loudness equalization option in my computer because it has to be somewhere since it has been operating in the background.
    The manufacturer is Sennheiser.

  • Windows Vista Speaker Propert

    Hi guys i have a Audigy 2 ZS sound card and using latest beta 4 drivers with it..... could plz tell me what are the best settings For the Speaker Properties & for Sample rate, so that i could get good sound quality. I hear a lot of mp3 songs & watch dvd-rip movies.......... And i'm using a Logtech Z-2300 speakers with it........

    24bit is nice, but current Audigy Vista drivers (beta and those really, really nasty 2.2.0002 ones) have various issues.
    Sometimes when you play media, then after play games, the sound will distort. Earlier drivers just stop producing sounds after a while.
    It's a shame because the current beta drivers sound really crisp with 24bit audio sources.

  • Elitebook 2540p Motherboard changed. Integrated motherboard IDT audio device missing in windows 7.

    Hi,
     Old situation:
    (I recently changed motherboard for my computer Elitebook 2540p. When i installed windows 7 to my computer the computer doesn't list any audio devices in device manager page. I've checked bios for any faulty settings and they are all set right. Theres no yellow marks in device list either and all drivers seems to be installed.)
    New situation:
    Installed windows 7 again and computer found / installed audio devices normally. I tested computer for hours to play audio from it and everything worked fine. I restarted computer several times / re installed battery to the computer. On one restart the computers audio quick mute button below the screen appeared to be orange and the sound speaker icon in windows was marked as X. I check device list again from device manager and there was no audio devices listed (No sound devices at all). After that i restarted computer and before the computer started downloadin windows i pressed the mute button and it turned blue. I then went to windows and sound devices / sound was working again.
     Old situation:
    I have motherboard integrated IDT audio device.
    When i try to install audio drivers from hp site for 2540p i get "Your system does not meet the minimum requirements for this update." And the device manager doesnt list any IDT audio devices.
     I then installed xp and the computer found IDT audio device normally and the sounds are working correct.
    New situation:
    After i did new windows 7 install and all my audio drivers installed / devices showed in device list / audio worked i downloaded audio drivers from HP driver site and installed them to the computer.
    Audio problems has not been occured again after my HP screen mute button turned to orange / Windows sound speaker was marked as X / Computer didn´t find any audio devices.
    Currently waiting if the problem occurs again and trying to think what would cause this ( Hardware problem or software)? And how to fix it permanently.
    Any help for this problem?
    BIOS is updated to newest version from HP driver download center.
    All windows drivers are installed.
    Motherboard info: Product Number VB841AV
    Product Model BU RCTO i7-640LM fMdm 2540p
    598762-001 MB SYS W/PROC CORE2 DUO 2.13 GHZ

    Hi Jarppi,
    Welcome to the HP Support Forums! To get your issue more exposure I would suggest posting in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
    I hope this helps!
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Speaker Properties, Custom Tab is missi

    When i go in to my speaker properties i'm missing the Custom Tab to enable digital audio ... I'm using the X-FI ExtremeGamer card in Vista-32 with the latest drivers. Has anyone found a fix for the problem Thanks, Indetroit

    Hi,
    Whether you have an enhancement tab in the Sound properties window depends on the particular audio driver loaded - some give this option and some don't.
    Try the following.
    First of all, uninstall your current IDT driver from its entry in Programs and Features and when done, restart the notebook.
    When windows has fully reloaded, download and install the version on the following link.
    http://ftp.hp.com/pub/softpaq/sp55501-56000/sp55977.exe
    When the installation has completed, restart the notebook again before checking if the enhancements tab is now available.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Updated IDT Audio Driver now sound and microphone are not working Hp Elitebook 8540w

    Hi,
    I updated my IDT audio drivers using the HP Support Assistant now I cannot get sound or microphone working on my laptop. the windows volume control shows "No Audio Device is Instialled" although I can see IDT High Definition Audio Codec is installed and enabled in the device manager. I have tried rolling back the driver and updated BIOS and chipset, but the issue persists.
    my system:
    HP Elitebook 8540w
    running Windows 7 Pro
    Help please

    Hi AndrewBC,
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums. I would try.
    1. Right click speaker icon (right hand corner)
    2. Select Playback devices
    3. Right click Speakers
    4. Enable it and set as Default
    5. Click Apply/Ok
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Beats/IDT Audio not working on Pavilion dv6 running Windows 7

    A few months ago my speakers would stop responding midway through audion or video. I assumed a restart was in order and did just that. Problem solved, many times over. Tonight, however, my audio would not work upon restart plus iTunes wouldn't open claiming an issue with my computer's sound properties. I uninstalled/reinstalled IDT audio, tried updating the drivers, updated just about everything else on my computer yet still no sound. My computer relates to me that everything is okay and in perfect working order while the diagnostics state that my sound is not working. 
    Headphones also don't work. Any thoughts?

    Hi,
    The following package is for Windows 7 64bit:
        http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59882.exe
    for both 32bit and 64bit (older):
       http://ftp.hp.com/pub/softpaq/sp56501-57000/sp56996.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • No sound, probably due to IDT Audio Codec

    There i s no sound at my laptop. The loudspeakers are on, Windows says they are working fine. All the volumes are high, sound is not muted etc. But I have no sound anywhere. I uninstalled the drivers on IDT Audio Codec, reset the values in my bios to their original ones (if they even weren't to start with). I have been running the audioplayback diagnosis from windows. Moved back to old version of my registry but nothing seems to work.
    I went through this forum and did what some of the people adviced but still it is not functioning. Although windows says that IDT Audio Codec is working fine, I get an errormessage Not able to play test tone (or that is the translation from Dutch). Also Windows Media player doesn't work and lands me on the page with error C00D11B1. Also playing a DVD doesn't work. And when trying to update the IDT Audio Codec driver, it says it is up-to-date. Also put all the sound settings (like sound quality to standard settings).
    I think that I removed the driver when cleaning up with CCleaner so that is probably the reason. Also after checking with this forum I launched two driverpackages SP59291 and SP6355 but unfortunately that they didn't work and they probably not the right version for my setup. Alhtough the letter of the two did bring back windows system signals during start-up etc.  The current version of the driver is 6.10.6329.0. I checked the HP-website to find the specific version for my laptop but couldn't find it, anyone any idea what I could do? Many thanks!
    This question was solved.
    View Solution.

    HI @HenriBlommers 
    Thank you for your inquiry, I will do my best to assist you!
    Please remember to include your exact model on notebook when posting to enable us to assist you more efficiently.
    I grasp that you have no sound on your notebook. Device manage states it is enabled and working.
    As I don't know your exact model of notebook I can not search for the driver, however you can restore the original driver using the recovery manager.
    Here is a link to HP Notebook PCs - Resolving No Sound or Audio Problems in Windows 7. There is a section on restoring the original driver to assist you.
    Have you ran the Windows troubleshooter to assist you?
    Here is a link to MSFix it that may also help.
    Have you checked for viruses or malware?   Microsoft Malicious Software Removal Tool
    Have you ran the HP Support Assistant  to aid with HP updates?
    To manually look for HP updates please input your exact model and follow the  prompts to display your drivers and any updates for your system.
    Heres is the link to  HP Drivers & Downloads.
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Could not download this driver: IDT High-Defin​ition Audio CODEC Driver for Microsoft Windows 7.

    Tried to download this driver:  IDT High-Definition Audio CODEC Driver for Microsoft Windows 7.
    It would not download - said it was not compatble with my operating system.
    I run Windows 7,   64 bit.
    I'm trying to increse the sound volume from the monitor.
    I have increased the sound to 100 from the monitor and in Windows .  It is still barely audible. . .

    Hello again valens-mom,
    Thank you for responding to my post requesting additional information. I can tell you that according to Product Specifications page for your HP Pavilion w2338h is a 23-inch wide-screen HDMI monitor, your monitor has 2 watts oer speaker integrated speakers. A pair of reasonably sensitive speakers deliver the following decibel levels at a distance of about one meter.
    Power/ Decibels
    2 Watts = 93 decibels
    4 Watts = 96 decibels
    8 Watts = 99 decibels
    16 Watts = 102 decibels
    32 Watts = 105 decibels
    64 Watts = 108 decibels
    128 Watts = 111 decibels
    256 Watts = 114 decibels
    512 Watts= 117 decibels
    1024 Watts = 120 decibels
    For Comparison
    10db = normal human breathing
    60db = normal human conversation
    110db = power saw, car horn, shouting in ear,
    120db = jet aircraft close by, emergency vehicle siren, rock concert
    Now as to whether installing the IDT High-Definition Audio CODEC Driver for Microsoft Windows 7 will give you the audio level you are seeking will depend on what computer you have and what audio drivers are installed. To provide you with more accurate information I would need to know additional information concerning your computer. Is this an HP computer? If it is not the driver question would be better answered by the computer manufacturer. If this is an HP computer could you please provide the product number for it so I can take a look into what drivers work on that computer?
    How Do I Find My Model Number or Product Number?
    Please if you require additional help in this re-post with the requested information and I would be happy to provide you with further assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • No windows sound after updating the IDT High definition Codec!! HELP!!!

    Hi all
    I really need ur help now
    I have updated IDT High Definitio Audio Codec several days ago
    after i reboot my notebook, I couldn't hear my windows sound anymore
    than i reboot till 2 times, n the windows sounds was heard again
    However, after I turn it on the next day, i found that i have no windows sounds again
    but i can play media players, such as winamp, n could hear msn sound
    After i reboot my PC, the sound was heard. But after turning it on for the 2nd times, i couldn't hear the windows sound again!!!
    Help me please
    How could I fix this?
    I have rollback driver, but i doesn't work. Coz before updating IDT audio by windows update, I have updated IDT audio through HP support assistant
    N i am a little bit afraid of doing system restore...
    PLEASE HELP ME
    THX

    Hi,
    Download correct audio driver.
    How to find it on HP sites?
    1. Click on Support & Drivers link. (Upper part of this page.)
    2. Choose option: Download drivers and software (and firmware)
    3. In form:
           Enter a product name / number
           For product provide Your p/n. (How to find correct p/n informations here.)
    4. Click on Go and choose system which You are using now.
    Disconnect from Internet.
    Uninstall from Your system IDT audio drivers.
    Resources:
    Uninstalling Software in Windows 7
    Uninstall or change a program in Windows 7
    Restart Your system:
    On boot press ' F8 ' and choose ' Safe mode '.
    Go to Control Panel -> Devices Manager -> Audio, Video and Games Controllers 
    and find there Audio card. Click on it with right button of Your mouse and choose uninstall driver.
    Restart Your system and this time start it in normally.
    Install this driver which You downloaded.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • A black airplay info window floats around on my HDTV screen when sending audio content via airplay up to sound system w Apple TV.  How can I get rid of this?

    A black airplay info window floats around on my HDTV screen when sending audio content via airplay up to sound system w Apple TV.  How can I get rid of this?

    Had this happen to me after a recent update, was super annoying.  To turn off, go to Settings > AirPlay > Conference Room Display > Off.

  • Beats audio software missing after I installed windows 8.1

     Beats audio software missing after I installed windows 8.1 
    my laptop: HP pavilion p011sv 

    Hi @Boukou ,
    Thank you for your  inquiry.
    I understand that after updating to Windows 8.1 you no longer have the Beats Audio software.
    You should be able to download an updated audio driver from HP Pavilion 15-p011sv Software & Drivers page .
    This should reinstall your Beats software.
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • No enhancements tab for loudness equalization

    Hi, 
    I've watched several youtube videos and read the same instructions here, on how to increase overall system volume through the enhancements tab and "loudness equalization".  When I go through the steps, both of these are missing.
    I checked to make sure I have the latest sound driver installed, and I do.  (IDT High Definition Audio CODEC). I think I read  that a previous version had access to this tab, but I have no idea how to install older drivers.
    Can anyone help to do that, or is there another way to maximize sound with this model? Why do the factory settings come so low? Is it to get people to buy extenal speakers?
    Thanks

    HI @musiclyrics ,
    Welcome to the HP Forums!
    It is a wonderful  place to find answers and suggestions!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that your audio is very low and you are unable to increase the overall volume on the system.
    Here are two links I think may help.
    High Definition Audio Driver will not Install until the Microsoft UAA Bus Driver is Installed
    No Sound from the Speakers (Windows 7)
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Problems loading generic Windows sound driver/Envy 14t-1000

    Info: HP Envy 14t-1000 CTO, Windows 7 (updated to latest SP).
    So, I recently tried updating my video drivers and unfortunately it messed with my audio settings (normally I'd do a system restore, but for whatever reason I forgot to create a restore point before updating...). At this point, I suspect that I accidentally re-installed the IDT High Definition Audio Codec, which leads me to my issue - I've been trying to uninstall Beats audio (and the IDT codec)  and use the generic audio driver that comes with Windows, and have followed the instructions listed here:
    http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/REMOVE-BEATS-AUDIO-LOAD-GENERIC-SOUND-DRIVE...
    However, no matter what directions I follow, after rebooting, the IDT codec reinstalls (that is, even after unchecking IDT Audio from the list of start-up programs and uninstalling the codec in device manager) instead of the generic Windows sound driver and IDT Audio is back in the list of start-up programs; the result is that I'm still getting the same rubbish sound. Is there a solution to this? I'm assuming that there is in fact a generic audio driver that I can revert to?
    Many thanks.

    Hi @frran ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY 14t-1000 CTO Notebook and having issues with the sound. Here is a link to the HP Support Assistant. Just download and run the application and it will help with uninstalling any software and drivers on your system that were originally installed.
    Here is a document that has troubleshooting for the sound. There could be an update for the BIOS. That might be needed.
    You could try this fix as it has helped with the Beats Audio.
    1. Right click the Speaker icon in the bottom right corner by your time.
    2. Click Playback Devices.
    3. Click Speakers.
    4. Click properties.
    5. Click the advanced tab on the Properties window.
    6. Change the Default Format drop-down to the highest quality.
    7. Apply the properties.
    8. Click OK to close the properties window.
    Hope this helps. 
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • No Equalizer (AKA Enhancements tab) For SoundMax Driver

    Is there a way I can get the Enhancements tab For my Lenovo ThinkPad T60p?
    I really only want an equalizer for when I'm watching YouTube videos and other things that do not have an equalizer.
    Also, my graphics card crashes a lot, is this because it is old, I overpower it (I play 3D games), or a combination?

    HI @musiclyrics ,
    Welcome to the HP Forums!
    It is a wonderful  place to find answers and suggestions!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that your audio is very low and you are unable to increase the overall volume on the system.
    Here are two links I think may help.
    High Definition Audio Driver will not Install until the Microsoft UAA Bus Driver is Installed
    No Sound from the Speakers (Windows 7)
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Maybe you are looking for

  • Can I install an OEM version of Windows 7 on my Mac?

    I am completely unfamiliar with windows terminology. I ordered a copy of Windows 7 64-bit and when it came it said OEM on it and had all these warnings that it had to be preinstalled on a computer and I assumed it was like the software that comes wit

  • Applet read server prop

    Hello I cannot figure out how to get an applet, to read a simple properties file that is at the same directory level as the html/jsp file that loads it. I have tried below and it fails with fnf, even though if I put in the full url name in the browse

  • If i install the Crystal Reports Server on server machine

    i have CR XI R2 edition ,if i intigrate with VS.Net will i be using VS Designer or crystal reports designer Edited by: kolahalam kathyaini on Nov 25, 2008 12:04 PM

  • Folder in NAS appears empty

    Hi, taking first steps with my new iMac. Newbee question, probably. Have a working Linksys network with 1 NAS and 1 Mediahub, set up under Windows. Worked fine, could read all the files on my Mac too. However, now the Downloads folder seems empty, bu

  • [svn] 2406: Merge 3.0.3 [2395] - 3.1.0

    Revision: 2406 Author: [email protected] Date: 2008-07-09 07:43:02 -0700 (Wed, 09 Jul 2008) Log Message: Merge 3.0.3 [2395] -> 3.1.0 Merging Flash Player 10 Beta 2 SWF support to 3.1.0's swfutils library. Modified Paths: flex/sdk/branches/3.1.0/modul