IDVD 08 quits and reports "Formatting error"

I've made new DVDs since installing 08 and carried forward older projects, but today both projects report "formatting error" when they reach some point in the burn. Any suggestions? Thanks.
JFT

Question #1: What is the source of this movie? Is it from a minidv camera via firewire? ..... USB 2? ...... or something else?
Most of the time updates and most upgrades proceed rather smoothly when it comes to apple's i-apps / software (But not always). I prefer never to update in the middle of a project. I'll often wait, finish the project with the older version, and then update.
Question # 2: Have you already tried exporting as a QT movie / file and then over to iDvd?

Similar Messages

Smartform output not displaying, no formatting affected on output and shows formatting Error.

Hi Guys,
I am new to SAP and working in Smartforms now. I am facing an issue that the output screen is not showing any formatting done during the design phase. Not even font changes are displaying, instead only showing the default Courier font. No Bold as well as italics too. And borders also showing some problems.
It was working properly till the last day and suddenly it gone faulty. Hence I cannot run the form and when I try to run it, it displays nothing. I have been designing a Tax Invoice. When I tried to execute the smartform from the form itself, it was showing Formatting Error.
What is the solution for this? I am using ECC 6. Please share your views.

Hi Sanjeev,
I've not made any changes to the formatting (Fonts and Borders) and I cross checked it many times.
Everything is fine and Times used everywhere as Font. It is showing the same in the design too but in the output, it comes as Courier !! (May be default settings in case there is some exceptions, I don't know)
I tried another report, pick list form, which too showing the same things. As we have developed only two reports, we cannot check more. The standard SAP forms are displaying as is, but the problem is with the newly designed ones.(Standard forms too are displaying in Courier font)
I think it might be any problem related to the output graphical properties of the smart forms...!!! I am not sure but I need expert advice from you if there is any such scenarios...

XI R2 To 3.1 Sp2 migration and report format issues

Hello,
is there a way to fix or troubleshoot report format issues after migrating to 3.1?
We have a heavy report that the format (the way the report looks) is very important. In crytal Reports 2008 sp2 the format is OK.
But from BOE CMC or from url reporting the report format have problems.
Thank you
Edited by: RUHVER BARENGI on May 18, 2010 9:47 AM
Edited by: RUHVER BARENGI on May 18, 2010 9:48 AM

Hi Ruhver,
Crystal Report documents are heavily dependant on the printer driver for formatting. If you design the report using a specific default driver than it will be dependant on that printer driver for formatting. When you publish it to Enterprise, the same printer driver may not exist so the report will be re-formated to fit the default driver on the server, or if no driver exists, it will use an internal method to format the report.
Try this as a test.
1) Open your report in the CR 2008 designer.
2) Click on the File/Page Setup.
3) Select the "No Printer" option. This tells the report to use this internal method to format the report
4) Save this document as "Title - No Printer"
5) Export it to Enterprise
6) Test this report again. Formatting should be identical in BOE vs CR.
Keep in mind that when you change the driver in step 3, the report in the designer will re-format. You may need to tweak the report again in order for the formatting to be as desired.
Test this out and if you require further assistance with this, I would suggest opening a message. This is a common issue and a support engineer could likely help you with this pretty easily.
Hope this helps,
Jb

The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook - error message

I applied Exchange Server 2013 SP1 and since then some users are getting error message:
'The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook' on their MS Outlook.
Have tried a number of options including repairing the affected user accounts to no avail.
Any idea on how to resolve this will be appreciated.
NB: This error was not there before applying SP1.

kindly need help. i have same message "'The Microsoft Exchange Administrator has made a change that requires
you quit and restart Outlook' on their MS Outlook"
this is comes after applying 2013 sp1

IDVD keeps giving Unsupported format error

When importing jpegs into iDVD I keep getting the error "Unsupported File Type"... I have checked permissions and all seems to be in order

Where are the photos being imported located? Whare are you importing to in iDVD?
What system and iDVD versions are you using?
What type of jpeg are they? Have they been edited by an image editor?
OT

Itunes installs and then says it has to close and report an error

Well yeah. I keep installing and uninstalling itunes but when it's finished the installation process it comes up with an error report message. Similarly when I attempt to open it it comes up with the same message. HELP PLEASE!!!
Acer TravelMate 4600 Windows XP Pro

hiya!
Itunes has encountered a problem and needs to close
the first thing that i check for when people report getting that message when they try to launch their itunes is a broken QuickTime.
try to open your QuickTime. does it launch properly, or do you get an error message?
if you get an error message, the first thing we'll try is a careful standalone QT 7.1 reinstall.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
love, b

IDVD 6 and "menu duration" error

I have created an iMovie and then an iDVD project. When I attempt to burn an .img file I got an error: "Total menu duration exceeds 15 minutes" The Loop Duration goes to 12:14 minutes. How do I correct this? I'm really getting frustrated on this.
Pete French

I apparently missed this.

ArchiveLink and Report Format

Hi,
newbie question on archivelink
Does ArchiveLink support saving SAP R/3 generated reports in external content server? If yes then in what format? If no then what's the alternative?
-Y

Hi Yasir,
SAP R/3 generated reports are supported by ArchiveLink and therefore can be stored in an external content server. There are even reports that allow an indexed storage in the external content server (the classical example is RFBELJ00).
But, any report can be archived. The FORMAT is an SAP proprietary format called ALF.
Best regards
Torsten

Quantity and Date format error in bapi_material_availability .

Dear Experts,
I'm facing a small problem in bapi_material_availability .When I'm Giving input to this BAPI like PLANT,Material,Unit,Check Rule etc...then after execution in the returning table 'WMDVEX' having fied COM_QTY is showing the the value like '4000' instead of '4.000' because it simply concatenating the decimals points..I also checked the user settings..It is perfect..
So plz suggest me to rectify this error.
Thanking you
Sudarsan

Dear Experts,
I'm facing a small problem in bapi_material_availability .When I'm Giving input to this BAPI like PLANT,Material,Unit,Check Rule etc...then after execution in the returning table 'WMDVEX' having fied COM_QTY is showing the the value like '4000' instead of '4.000' because it simply concatenating the decimals points..I also checked the user settings..It is perfect..
So plz suggest me to rectify this error.
Thanking you
Sudarsan

Trying to convert a pdf to a word doc using Acrobat XI Pro. I am getting formatting errors and scrambled text, especially right below headings. Not all headings affected, just some, but all the same paragraph tag. Any ideas?

I am trying to convert a pdf to a word doc. The pdf was created in Framemaker. I am using Acrobat XI Pro and getting formatting errors and scrambled (or missing) text, especially below a heading. Any fixes?

Hi pakbecker,
Please try updating to Acrobat 11.0.7 and check.
In case you still face issues, i would like to have a look at th doucment.
Send me an email at [email protected]
Regards,
Rave

Why does idvd quit when i try to add media from iphoto?

In iDVD, whenever I click Media & then click Photos, it looks like i should be able to select items from iPhoto: But if I click any of the top-level items listed like Events or Photos, iDVD quits/closes without any error messages. This happens in both new & existing iDVD projects (I've never actually used iDVD before today). Also, in iMovie I can ony see older Events & photos in iPhoto when I try to add photos to a project. This makes me think there might be something up with my iPhoto software or its data.
I'm pretty sure I'm using the latest versions of iDVD & iPhoto from the old iLife ('08) included with my MacBook Pro: iDVD version 7.1.2 (1158), iMovie version 8.0.6 (821), & iPhoto version 8.1.2 (424), running on Mac OS X version 10.6.8. I assume the Apple Software Update app automatically installed whatever updates I have over the versions that shipped with my computer.

Try this basic troubleshooting fix :
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iDVD folder.
Click to view full size
3 - launch IDVD and try again.
OT

Jsp trial - nitrox reports tiles error

Hi,
I just downloaded the nitrox trial version to use with Eclipse 3.0.1. I have a project that makes use of Java Server Faces and Tiles (an ibm sample from http://www-128.ibm.com/developerworks/java/library/j-jsf2/). To gain access to Tiles, I use the struts.jar and struts-el.jar libraries. I don't, however, use struts (i.e. there is no struts-config.xml).
I can build and execute the code under Tomcat 5.0.25 and it works fine.
The problem
Nitrox, however, reports the following error with index.jsp in the Eclipse Problems tab at the bottom of the screen:
"The tile ".index" cannot be found in the Struts tiles config files for this module."
I suspect that tiles-def.xml is not being found. If I rename tiles-def.xml to tiles-def-mod.xml, I still get the same index.jsp error.
Any idea why Nitrox is reporting this error?
Details
1. Tomcat-5.0\conf\server.xml has this line:
<Context debug="0" docBase="C:\MyProjects\eclipse\cdstore\WebContent" path="/cdstore" reloadable="true"/>
2. index.jsp and tiles-def.xml are located in:
C:\MyProjects\eclipse\cdstore\WebContent\index.jsp
C:\MyProjects\eclipse\cdstore\WebContent\WEB-INF\tiles-def.xml
C:\MyProjects\eclipse\cdstore\WebContent\WEB-INF\web.xml
3. index.jsp has two lines:
<%@ taglib prefix="t" uri="http://jakarta.apache.org/struts/tags-tiles" %>
<t:insert definition=".index" />
4. web.xml has:
<servlet>
<servlet-name>tiles</servlet-name>
<servlet-class>org.apache.struts.tiles.TilesServlet</servlet-class>
<init-param>
<param-name>definitions-config</param-name>
<param-value>/WEB-INF/tiles-defs.xml</param-value>
</init-param>
<init-param>
<param-name>definitions-parser-validate</param-name>
<param-value>true</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>

I folowed your suggestions and added the struts stuff to my web.xml and placed an empty struts-config.xml under WEB-INF. I'm still receiving the same Nitrox error messages.
I intentionally removed the end bracket and changed the <struts-config> tag to <struts-config. Nitrox picked this up and reported the error.
When I made the same change to <tiles-definitions in the tiles-defs.xml file, Nitrox did not pick up the error.
My struts-config.xml file
<?xml version="1.0" encoding="ISO-8859-1" ?>
<!DOCTYPE struts-config PUBLIC
"-//Apache Software Foundation//DTD Struts Configuration 1.1//EN"
"http://jakarta.apache.org/struts/dtds/struts-config_1_1.dtd">
<struts-config>
</struts-config>

Receiving an "Unknown Format" error code when submitting a form

Product: Adobe Acrobat 9 Pro Extended
Hi, I'm trying to find out what exactly is Acrobat expecting as a return value on its form submission.
two parts to my setup:
1. The form. It is a garden vaiety form with a button on it which set up as follows:
Action -> Mouse Up -> Submit a form -> PDF The complete document
2. The receiver. This is a REST based service, expecting a HTTP Post.
For the most part, the whole setup works like a charm - the form is posted by the client, the server receives the file, creates a local copy and processes it correctly. After the post is successfully received, the last step on server is to send a reply to the client. This is where I’m getting stuck.
If I return an HttpStatusCode.Ok and a blank SOAP.Fault, I’m getting and “Unknown Format” error on the client side. I tried several different combinations/values/etc, including sending the result code only, but since I don’t know what exactly is acrobat expecting, I’m just shooting in the dark. Other error codes I’ve seen include “Invalid Server Response”.
Unfortunately I can’t find any guidance from Adobe on what Acrobat is expecting in return for the submit functionality, so any help/pointers are greatly appreciated.
Thanks everyone!

Here is the contents of a sample FDF that will cause a popup to display when it is imported:
%FDF-1.2
1 0 obj
<< /FDF << /Status (Your message goes here.) >> >>
endobj
trailer
<< /Root 1 0 R >>
%%EOF
Replace "Your message goes here." with the text you want to display, and don't change anything else in the sample. The value of the /Status key in the FDF is a PDF string, so it has to follow the rules described in the PDF standard (ISO 32000) for strings. So read up on it so you know how to properly escape/encode PDF strings.
Note that the server needs to set the MIME type of the response in the "Content-type" HTTP header to "application/vnd.fdf".

5.0 won't work - extensions message is "localized string not found". When I force it to try to load a new window it shows a gray screen with the bookmarks on top then immediately closes and wants to report the error. Has been this way since 5.0 came out.

I first tried downloading Safari when the 5.0 update came out last year. When I choose the app in the dock, I get the blue top bar (Safari, File, etc) but nothing else loads. I uninstalled the app and tried again several times, but no success. For over a year now I've used Firefox as a result. Today I thought I'd try again, but same results. When I choose "new window" in the file menu, I get a small gray window with my bookmarks on top, then in a few seconds, the app quits unexpectedly and the report an error screen appears. I've unchecked all the languages in the information area for the app, cleared all history, cookies, and cache. Still the extensions tab in the preferences area has "LOCALIZED STRING NOT FOUND" in 4 places. It won't show what that means when I click the "?". Will I ever be able to use Safari again?

Perform the suggestions mentioned in the following articles:
* [[Firefox is already running but is not responding]]
-> Profile in use
* [http://kb.mozillazine.org/Profile_in_use]
Check and tell if its working.

Issue on How to mimic Deski document from CMS to local machine, pass parameter, execute and save in a mutiple report format then store in a network drive.

Post Author: usaitconsultant
CA Forum: JAVA
Would you know if there's a way to mimic Deski
document from BOXI server(CMS) to local machine, pass parameter, execute and
save in a mutiple report format then store in a local drive or network
drive? Most examples and tutorials in BO XI R2 I've seen are scheduling while drilling report is for web intelligence only and not desktop intelligence. Please let me know your ideas. I would really appreciate your help. Thanks.

Post Author: usaitconsultant
CA Forum: JAVA
Hi Ted,
Thanks for the reply.The file is not available in the server. Though, I checked CMS and I found an instance in history tab and the status is failed with error below.
Error Message:
A variable prevented the data provider Query 1 with BANRRD30 from being refreshed. (DMA0008).When I checked my codes, I found out that the object Im using is for web intelligence data provider. However, I cannot find any documentation and example for passing parameter values in desktop intelligence data provider. Any idea on this? You think this is not suported by Report Engine SDK?Thanks.

IDVD 08 quits and reports "Formatting error"

Similar Messages

Maybe you are looking for