IDVD 5.0.1 mulitplexing/burning errors

Here goes, my factory installed combo drive broke, so I got a new CD/DVD Burner : (company installed)
Manufacturer:     _NEC
Model:     _NEC DVD_RW ND-1300A
Revision:     1.05
Drive Type:     CD-RW/DVD-RW
Disc Burning:     Vendor Supported
My iDVD 3 worked once, then would not work, it wouldn't open properly and had to force quit every time.
I asked our IT dept to re-install it. They couldn't find the software re-install disc. Sooo they got out the iLife disc and installed iLife with iDVD 5.0.1.
It won't work either.
When I try to burn a DVD, it proceeds like it is encoding, then at the end, it gives me an error message; Errors in Burning Process. I hit ok then it says: Multiplex Error, problem during multiplexing/burning. I am left with a blank DVD and lots of frustration.
I try to bring up old DVD projects I've previously made with iDVD 3, but it keeps trying to find files that it cannot find. Even though I have all the files saved.
I have Quicktime 7.0 that I installed a while ago and iDVD 3 did fine with those exported files.
I have FCP HD 4.5, I usually export as a Quicktime file, same as source, creating new media (stand alone file). Never had a problem before with iDVD 3 and my old combo drive.
I have Mac OS X (10.3.9). I have 40 Gb available on my start up drive (Mac HD).
As I said before, I sucessfully burned one or 2 discs before iDVD 3 started acting up on me and led me to install iDVD 5.0.1.
Here's my console report from today's attempt:
Contents:     Mac OS X Version 10.3.9 (Build 7W98)
2005-10-21 10:13:17 -0700
iDVD: Burn started, Fri Oct 21 10:39:55 2005
iDVD: Burning to DVD-R media with DAO strategy in _NEC DVD_RW ND-1300A 1.05 via ATAPI.
iDVD: Requested DVD burn speed was 2x, actual burn speed is 1x.
iDVD: Burn underrun protection is supported, and enabled.
iDVD: Burn failed, Fri Oct 21 10:39:56 2005
iDVD: Burn sense: 5/30/05 Illegal Request, Cannot write medium, incompatible format
iDVD: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
I've read some of the threads on this problem already, with no luck so far.
Any suggestions appreciated.
Thanks,
JBT

I am having a similar problem burning via IDVD 4. However, in my case the Superdrive in the installed original on a year old PowerMac G5. This is the second of two similar FCE projects each 90min. The first burned fine but the second one gets to stage 4 and stalls. The striped progress bar moves but the burning never takes place even after hours. Hitting the cancel button has occasionally given the message "errors were found during the burning process. Logical end-of-file reached during read operation".
I have tried the follwing remedies without success:
1) taping the video back to the camcorder and reimporting it into IMovie. It looked fine even in the IDVD preview but would not burn
2) I did an archive and install of the OS including the ILife apps
Even more perplexing is the fact that a short segment of the project in question burned just fine did a two hour long video saved as a disc image.
I would greatly appreciate any assistance. Thanks, Jay

Similar Messages

  • Burning error on iDVD

    I am trying to burn a DVD that includes pictures and music. I have most of the slideshows done, but when I tried a test-run burn--it won't complete it.
    It says something about a multiplexing/burning error. I click ok, and then it shows me an error message that says:
    Burning finished.
    Errors were found during the burning process.
    Error #536890198
    Can anyone tell me what the problem is? I'm using DVD+R discs. I looked, and my iMAC supports DVD+/-R or RW and DL as well. I'm semi-new to mac and super new to iDVD.
    Any suggestions??
    THANKS!
    iMAC--intel   Mac OS X (10.4.5)  

    Hello Kholt,
    I would recommend the following steps:
    1. iDVD is NOT a disc burning app, so leave that work to software designed for it. Instead use iDVD's "Save as Disc Image" option (File > Save as Disk image). This creates an .img file on your HDD, that can be stored for future use and gives you the option to preview your DVD on your Mac before burning to disc.
    2. Use Disc Utility or Toast to burn your DVD at slow speed. 4x is acceptable, 2x (... or even 1x) is better.
    3. Use high quality DVD-R (not DVD+R) media (e.g. Verbatim) to minimize burn errors and compatibility issues. Make sure the DVD is compatible with slow burn speed (e.g. 1x-4x)
    Also: iDVD likes to have the project(s) on your startup disc with 15 - 20 GB of available disc space
    hope this helps
    mish

  • IDVD keeps reporting Burn Error #-1

    Ok, I've checked previous posts regarding Burn errors, only found one relating to error 1 which said it was due to audio overrun on the movie.
    My question is how does this occur when the movie and audio are imported together? The audio has not been extracted and the end of the film has been edited out. (Split video at current frame, and move excess not required out of the timeline)
    This has been ongoing now for three weeks. This is what I have done:
    1. Imported hi-8 90 min movie from camera thru Canopus ADVC55 into iMovie. (First time this was done got one clip, second time got two clips but first was over 60min, last time I restricted import to max 50min clips). Project is located on my external WD MyDisc reformatted for HFS. Cleared 50Gb of free space from Macintosh startup drive.
    2. Added clips to timeline. Saved three frames as JPEG's to use in iDVD menu. No chapter markers, transitions etc. just the raw movie. Saved iMovie project
    3. In iDVD created a new project (on Wd drive same directory as iMovie project) set the theme to Scrapbook (V5.0 theme) edited the drop zone to add the JPEGS saved earlier
    4. Added the movie file from the Media page and dragged the movie onto the menu.
    5. Edited the title on the menu.
    6. Save iDVD project
    7. Save as Disk Image on WD external drive (same directory as iDVD project)
    8 Encodes for 3 hours and comes up with error, haven't managed to catch the change from Encoding movie to encoding audio to see if it gets past this.
    9. Repeated exercise using 5 min movie. This worked fine.
    10. Trashed iDVD preferences - no effect
    11. Trashed iMovie, iDVD and Quicktime - reloaded iMovie and iDVD from installation disks and downloaded Quicktime. Rebooted - no effect.
    12. Shut down and reconfigured my set-up. WD HDD was at end of Firewire chain
    MAC->USB Hub (2 FW)->Iomega HDD->Lacie d2 DVD writer->WD HDD
    to
    MAC->USB Hub->Iomega HDD->WD HDD
    anything else i can try?

    Hi
    a. Yes it most often was related to stray audio fragments outside movie duration
    but it is a general error so there might be many more origins
    b. USB-hubb FW (FireWire connections) Sounds strange to me but might fall back to my ignorance.
    I would try to keep as few item connected as possibly and stay away from any form
    of Daisy Chaining.
    *Not knowing the origin to Your problem - General approach when in trouble is as follows:*
    • Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
    • Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
    • Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
    • Program miss-match: iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK - DON’T work under Leopard
    • Program miss-match: iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
    • Program miss-match: iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
    • iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
    iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
    iDVD pref file resides: Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
    and is named: com.apple.iDVD.plist
    While iDVD is NOT RUNNING - move this file out to desk-top.
    Now restart iDVD.
    Yours Bengt W

  • Burning errors using IDVD 3.0.1

    I export a video from Final Cut Express HD to the desktop. I then open IDVD version 3.0.1 and dragged the movie into IDVD and then started the burn process. I get the following error
    Error during the recording process
    #-2147352539

    Did you get this fixed? Could be any number of thing and we would need a bit more info to really help out... is this a self contained movie? How long is it (iDVD 3 will do 90-minutes max)? Does it playback in QT OK? and so on. A few things to try of the cuff: Make sure you are using DVD-R (minus R) NOT DVD+R (plus R) . There is a difference and iDVD 3 will only use -R. Save your sequence some place other than the desktop & make sure you have at least 10gigs of free hard drive space. It's a place to start.
    Good Luck,
    Mike

  • Disk Utility: Burn error: 0x80020022 The device failed to respond...

    I've been working on archiving a ton of video to DVD. I'm using Dual-Layer discs to minimize the amount of physical storage space needed for the finished project. I burned several discs in iDVD in July and regularly received errors. Then the drive suddenly stopped loading any type of media. Anything I inserted would spin briefly and then eject. Repaired permissions and followed steps outlined here and here. Took the Mac back to the store where I bought it (sadly, not an Apple Store - nearest one is 12 hrs away) where naturally it performed flawlessly for the store rep.
    So I took it home and resumed burning, now saving as a disc image (ignoring iDVD's warning about the performance of DVDs burned this way) and using Disk Utility, since iDVD didn't seem to be reliable. Burned about 25 discs, error-free, in this fashion, then three days ago, got the error: "Unable to burn “Disc 19.img”. (The device failed to respond properly, unable to recover or retry.)"
    Retried the same image, and it worked. Then burned two more in the same fashion with no errors. Today I got the same error again. Logs are identical for each failed burn, except for the time span between certain lines.
    Price of DL media being what it is, I'd hate to keep ruining discs if there's something I can do to avoid it. I suppose it could be bad media, but it seems odd that I'd get two bum discs that close together after burning so many without issue. Checked the site and the forums, and there doesn't seem to be any answers. Does anyone have any ideas? (Other than "try a different brand of media." I've got a buttload of these discs and it's too late to return them now.) Even if it just helps determine where the issue lies. Warranty will be up soon, so if it's hardware related, I need to get it taken care of quick.
    Media: Philips DVD+R DL 8x
    *Drive info:*
    HL-DT-ST DVDRW GS21N:
    Firmware Revision: SA15
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: Insert media and refresh to show available burn speeds
    DiscUtility.log:
    2009-10-03 08:54:01 -0600: Burning Image “Disc 22.img”
    2009-10-03 08:55:15 -0600: Image name: “Disc 22.img”
    2009-10-03 08:55:15 -0600: Burn disc in: “HL-DT-ST DVDRW GS21N”
    2009-10-03 08:55:15 -0600: Erase disc before burning: No
    2009-10-03 08:55:15 -0600: Leave disc appendable: No
    2009-10-03 08:55:15 -0600: Verify burned data after burning: Yes
    2009-10-03 08:55:15 -0600: Eject disc after burning
    2009-10-03 08:55:15 -0600:
    2009-10-03 08:55:15 -0600: Preparing data for burn
    2009-10-03 08:56:30 -0600: Opening session
    2009-10-03 08:56:35 -0600: Opening track
    2009-10-03 08:56:35 -0600: Writing track
    2009-10-03 09:01:37 -0600: Finishing burn
    2009-10-03 09:02:37 -0600: Closing session
    2009-10-03 09:02:38 -0600: Finishing burn
    2009-10-03 09:38:37 -0600: Burn failed
    2009-10-03 09:38:37 -0600: The device failed to respond properly, unable to recover or retry.
    2009-10-03 09:38:37 -0600: Additional information can be found in the ~/Library/Logs/DiscRecording.log log file.
    2009-10-03 09:38:37 -0600: Unable to burn “Disc 22.img”. (The device failed to respond properly, unable to recover or retry.)
    DiscRecording.log:
    Disk Utility: Burn started, Sat Oct 3 08:55:15 2009
    Disk Utility: Burning to DVD+R DL (CMC MAG D03) media with DAO strategy in HL-DT-ST DVDRW GS21N SA15 via ATAPI.
    Disk Utility: Requested burn speed was 47x, actual burn speed is 4x.
    Disk Utility: Burn failed, Sat Oct 3 09:37:15 2009
    Disk Utility: Burn sense: 4/44/90 Hardware Error,
    Disk Utility: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
    Message was edited by: Weasel42

    I have encountered the same problem. I have a Mac Book Pro from 2007, and it has gone through 3 DVD writers so far, all of which have ruined DVD+R DL disks. I have occasionally been able to burn one, but usually during verify, I get this error message:
    Communication to the disk drive failed: 0x8002022
    And disk utility fails with a "Invalid B-tree node size" error
    Oddly, when I try to burn a disk near capacity (6.5Gb or more) it is more likely to fail than if I burn a smaller disk.
    I've been using Memorex DVD+R DL disks, but I have used other brands in the past but they have failed, too. Out of about 50 disks so far, I have had success with about 5.

  • IDVD ejects during multiplexing and burning

    Hi folks,
    I've used iDVD previously (several times) to create DVDs of movies I've created in FCE4. Today, the program goes so far, then ejects the disk during the "multiplexing and burning" / "writing lead-in" portion. When I check, there's nothing on the disk. Anyone every experience this? And, if you know, please advise as to how I might fix the problem.
    Thanks very much for your expertise.
    Vic

    Multiplexing Error
    Hi
    Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
    So first - turn on TV-Safe area and move any object well inside of this.
    Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
    Now my long long list on Multiplex Error
    LONG LONG LONG LIST
    Multiplexing Error
    PART One.
    Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
    I only use.
    Video - StreamingDV (miniDV tape via FireWire) and
    Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
    Photo - .jpg (.bmp known problematic)
    Chapters !
    A.    Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
    as described by Donnyboy69.  Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
    B.    Location of Chapters
    • Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
    • Not in a transition (or within 2-3 seconds from it)
    Important when from iMovie HD6 or previous - Now also observed when using FCE 4
    PART Two.
    from Robert Modero.
    "Multiplexing Error. Problem during initialization of tracks"
    Simply remember to add subtitles to your Quicktime files and menu buttons.
    Once I did that, I was back in business.
    from Boise Jim
    Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    I always makes a DiskImage first and test this so that it runs OK
    I use only - Verbatim DVDs
    I use only - DVD-R
    I burn at an as slow speed possibly e.g. x1
    This gives good DVDs
    PART Three.
    Multiplex Error
    Chuck, Chicago 2/7/2009.
    Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
    2. Disconnect any other external devices not absolutely needed.
    e.g. external USB/USB2 hard disks, other FW hard disks etc.
    3 Chapter marks in transitions - minimum 2 sec from
    FROM Bev.
    (Not a 'guy' but I will answer!)
    First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
    Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
    Also, choose a slower burn speed, 4x or less.
    Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
    From. Boise, Idaho
    I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    It worked, and I got a clean burn from iDVD.
    Hopefully this can help other people.
    by dheb0422
    Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
    One user more writes
    To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
    Video from both passed from FCE 4.01 with chapters
    One project worked fine in creating disk image file
    The other gave Multiplex Errors
    I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
    Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
    Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
    This time multiplex errors gone
    So had something to do with chapters
    So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
    After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
    That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
    When I removed "bad" chapter mark (and others in), no multiplex error
    As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
    I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
    Rich839
    In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
    Russ One - suggest this
    Multiplex Error-There was an error during muxing preparation
    One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
    Summary - What to try
    1. Chapters
    • Only A to Z and 0 to 9 in chapter title
    • No Chapter mark at very beginning of movie
    • No Chapter mark in or within 2 seconds from any transition in movie
    2. TV-safe area for buttons (no one outside this)
    3. Safe re-boot
    4. No other external devices connected - that are not needed
    SDMacuser adds to this
    • On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
    Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
    5. Minimum of 25Gb free space on Start-up hard disk
    6. Make a DiskImage first - reduces where problem originates
    7. Trash iDVD pref. file
    8. Make a new iDVD project
    9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
    10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
    Yours Bengt W

  • DVD Burning Error: Unknown device error. (0x73, 0x03.)

    I have been trying to burn a home movie using iDVD. I transferred the media successfully to my computer, followed all the steps, and was finally ready to burn the DVD. After waiting almost an hour through the burn process, it spit the DVD back out of my Macbook Pro and gave me the following message.
    *Errors were found during the burning process:*
    *The recording device reported the media error: Unknown device error. (0x73, 0x03.)*
    I don't really know what this means. Was the media corrupt? Or is there a problem with my DVD player? I have supplied my DVD and computer information below. I would appreciate all the help I can get. Thank you in advance!
    Courtney
    *MATSHITA DVD-R UJ-857D:*
    Firmware Revision: KCVB
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +R DL, +RW
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    Media: Insert media and refresh to show available burn speeds
    *Hardware Overview:*
    Model Name: MacBook Pro 15"
    Model Identifier: MacBookPro2,2
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.16 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 1 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MBP22.00A5.B07
    SMC Version (system): 1.12f5

    Using the same media I've used for years (Verbatim 4x InkJet printable) and all of a sudden can't burn from the internal drive. I do have an external burner (7 disc standalone replicator with USB/FireWire 400) and hooked that up and burned to a disc from the same spindle with no problem, and then made a 3x replicate with the same media. So it's looking like my MacBook Pro's drive is failing?
    Laptop is plugged in and fully charged.
    DVD Studio Pro: Burn started, Fri Oct 23 22:42:55 2009
    DVD Studio Pro: Burning to DVD-R (MCC 01RG20) media with DAO strategy in MATSHITA DVD-R UJ-857E ZA0E via ATAPI.
    DVD Studio Pro: Requested burn speed was 4x, actual burn speed is 4x.
    DVD Studio Pro: Burn underrun protection is supported, and enabled.
    DVD Studio Pro: Write (10), block: 0, count: 64 -> 3/73/03 Medium Error, Power calibration area error
    DVD Studio Pro: Burn failed, Fri Oct 23 22:44:13 2009
    DVD Studio Pro: Burn sense: 3/73/03 Medium Error, Power calibration area error
    DVD Studio Pro: Burn error: 0x8002006D The device failed to calibrate the laser power level for this media.
    DVD Studio Pro: Burn started, Fri Oct 23 22:55:50 2009
    DVD Studio Pro: Burning to DVD-R (MCC 01RG20) media with DAO strategy in MATSHITA DVD-R UJ-857E ZA0E via ATAPI.
    DVD Studio Pro: Requested burn speed was 4x, actual burn speed is 4x.
    DVD Studio Pro: Burn underrun protection is supported, and enabled.
    DVD Studio Pro: Write (10), block: 0, count: 64 -> 3/73/03 Medium Error, Power calibration area error
    DVD Studio Pro: Burn failed, Fri Oct 23 22:57:08 2009
    DVD Studio Pro: Burn sense: 3/73/03 Medium Error, Power calibration area error
    DVD Studio Pro: Burn error: 0x8002006D The device failed to calibrate the laser power level for this media.

  • Multiplexing & Burning Error

    I am new to idvd and have made one short movie successfully. Now I have one that is 137 min and 4.29gb. I am trying to get it to burn on DVD+R DL. I spent 2 days on it and it pops out the DVD and says multiplexing & burning error.This happened a couple of times. The status still shows 7 plus minutes, but the disc is out. I am not sure what is going on. Any ideas? I reviewed it all and have 21 scenes,and everything seems like it should work. Any help is appreciated. Thanks!!

    I have found that the DVD+R discs don't work for me, I found that only DVD-R worked. Try that, and if that doesn't work post here again and I'll see what else I can dig up for you

  • IDVD having problems "during multiplexing/burning"

    Help please:
    iDVD is not burning DVDs for me.
    it goes through the whole process seemingly fine, then at the end shows the error message: "problem during multiplexing/burning".
    I have a G4 emac. 800 Mhz 10.3.9
    external Lacie dvd burner (that burns fine on wife's imac)
    I was having this problem earlier, then erased the hard drive to start clean. Didn't seem to help.
    I upgraded the Lacie driver, etc too.
    thoughts?
    R

    Ah then if Toast has a connection issue and iDVD is having issues when burning, it would appear that your issue is unrelated to iDVD and instead a system or hardware problem. Unfortunately that might be too hard to diagnose here in this forum, at least not with a ton of non-iDVD related back and forth questions and answers.
    Did you play the disc image on your computer to see if the titles made it into the disk image? My guess if they didn't make it onto the DVD blank, then they are not in the disk image either, although maybe they were?
    Patrick

  • IDvd freezes during 2nd -3rd burn

    When burning DVDs with IDVD the first dvd burns ok
    but on the 2nd -3rd try the process freezes up. The Dvd is ejected but not completely burned. I have to force quit and start the entire process over- takes hour+
    The problem started after upgrading to iLife 06. Can this be apart of the issue?
    Any ideas?
    Thanks!

    Hello Tony,
    glad you got it up and working.
    I'm surpised since the superdrive is a new one, barely 3 months old
    I have never had this problem, but I don't think it depends on the age of the burner or is an indication of a malfunction .... you're just pushing the burner a bit to hard.
    Should I upgrade to 10.4.4? If so, what is the name of the upgrade package?
    I would recommend upgrading to Tiger (OS X 10.4). You'll have to buy the new OS, then get the updates (if necessary). I believe the most recent is 10.4.7.
    I will try the disc image process...
    That is definitely the way to work in iDVD. Not only does it minmize burn errors, but it also produces a file that can be stored on your HDD for future burns.
    hope this helps
    mish

  • Why does iDVD keep giving me a multiplexing error and ejects my DVD?

    I have tried several times to create a simple movie with iMovie and iDVD. Both are from the iLife 6.0 series. Each time, the movie imports to iDVD okay, goes through all the asset encoding just fine, and when it get to multiplexing and burning, it stops with a message saying there was something wrong with the multiplexing or asset encoding and ejects the DVD. Help. I am at my wits end with this.
    dennis

    Hi
    Multiplex Error - is one of the most complex error to run into - can be so much
    see (especially new info at end of list)
    MULTIPLEX ERROR !
    Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
    So first - turn on TV-Safe area and move any object well inside of this.
    Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
    Now my long long list on Multiplex Error
    LONG LONG LONG LIST
    Multiplexing Error
    PART One.
    Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
    I only use.
    Video - StreamingDV (miniDV tape via FireWire) and
    Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
    Photo - .jpg (.bmp known problematic)
    Chapters !
    A.    Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
    as described by Donnyboy69.  Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
    B.    Location of Chapters
    • Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
    • Not in a transition (or within 2-3 seconds from it)
    Important when from iMovie HD6 or previous - Now also observed when using FCE 4
    PART Two.
    from Robert Modero.
    "Multiplexing Error. Problem during initialization of tracks"
    Simply remember to add subtitles to your Quicktime files and menu buttons.
    Once I did that, I was back in business.
    from Boise Jim
    Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    I always makes a DiskImage first and test this so that it runs OK
    I use only - Verbatim DVDs
    I use only - DVD-R
    I burn at an as slow speed possibly e.g. x1
    This gives good DVDs
    PART Three.
    Multiplex Error
    Chuck, Chicago 2/7/2009.
    Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
    2. Disconnect any other external devices not absolutely needed.
    e.g. external USB/USB2 hard disks, other FW hard disks etc.
    3 Chapter marks in transitions - minimum 2 sec from
    FROM Bev. (Not a 'guy' but I will answer!)
    First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
    Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
    Also, choose a slower burn speed, 4x or less.
    Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
    From. Boise, Idaho
    I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    It worked, and I got a clean burn from iDVD.
    Hopefully this can help other people.
    by dheb0422
    Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
    One user more writes
    To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
    Video from both passed from FCE 4.01 with chapters
    One project worked fine in creating disk image file
    The other gave Multiplex Errors
    I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
    Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
    Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
    This time multiplex errors gone
    So had something to do with chapters
    So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
    After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
    That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
    When I removed "bad" chapter mark (and others in), no multiplex error
    As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
    I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
    Rich839
    In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
    Russ One - suggest this
    Multiplex Error-There was an error during muxing preparation
    One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
    Summary - What to try
    1. Chapters
    • Only A to Z and 0 to 9 in chapter title
    • No Chapter mark at very beginning of movie
    • No Chapter mark in or within 2 seconds from any transition in movie
    2. TV-safe area for buttons (no one outside this)
    3. Safe re-boot
    4. No other external devices connected - that are not needed
    SDMacuser adds to this
    • On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
    Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
    5. Minimum of 25Gb free space on Start-up hard disk
    6. Make a DiskImage first - reduces where problem originates
    7. Trash iDVD pref. file
    8. Make a new iDVD project
    9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
    10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
    Max Mccarty
    Mar 29, 2013 7:55 PM
    I've made literally hundreds of DVD's using iDVD and I occasionally get the dreaded "Multiplex Error". In the past changing the position of chapter markers has worked, but sometimes the only way I can get the DVD to burn is to remove all the chapter markers (not a great solution).
    Recently, I've discovered a bug in iDVD that creates the "Muliplex Error" message and it may be the cause of some of my previous problems. Sometimes when you export a movie to iDVD with chapters, it will create chapter menus with incredibly long playing times. My most recent "Multiplex Error" project had two chapter menus. I have a 38 second audio clip that I use for my DVD menus and the first menu showed the correct time of 38 seconds (select View>Show Inspector). The second menu with the same audio clip showed 13 minutes and 42 seconds! When I went to the Project Info window (select Project>Project Info) it now showed the total size of my DVD as 4.8 GB, too big for iDVD to encode. So, I manually adjusted the time of the second menu to 38 seconds. This time without changing anything else, iDVD  burned the disk perfectly.
    The interesting thing is that when I began the burn, the project info showed under 4GB for my disk. So, from now on I'll check the playing times of each menu before I burn.
    Yours Bengt W

  • IDVD always fails on 2nd burn

    IDVD 5 (OSX 10.4.2 on Dual 2.3Ghz G5) always completes first encode and burn without issue. When it's done I pop in the 2nd disk. It attempts to write (Disc is not touched) and then pops it out with "Finished recording" and the Beachball spins forever making me force quit.
    Anybody else seeing this and/or know how to fix it. Yes I know the workarounds about burning a disk image but I'm wondering what's causing the issue in the first place.
    Here's what the Console Reports. You can see the successful attempt is at 4X (although they're Verbatim 8x discs) and the second attempt is at 8X.
    iDVD: Burn started, Wed Aug 31 21:36:15 2005
    iDVD: Burning to DVD-R media with DAO strategy in PIONEER DVD-RW DVR-109 A912 via ATAPI.
    iDVD: Requested burn speed was 4x, actual burn speed is 4x.
    iDVD: Burn underrun protection is supported, and enabled.
    iDVD: Burn finished, Wed Aug 31 21:40:24 2005
    iDVD: Verify started, Wed Aug 31 21:40:24 2005
    iDVD: Verify finished, Wed Aug 31 21:40:24 2005
    iDVD: Burn started, Wed Aug 31 21:43:01 2005
    iDVD: Burning to DVD-R media with DAO strategy in PIONEER DVD-RW DVR-109 A912 via ATAPI.
    iDVD: Requested burn speed was 8x, actual burn speed is 8x.
    iDVD: Burn underrun protection is supported, and enabled.
    iDVD: Write (10), block: 768, count: 64 -> 3/0C/00 Medium Error, Write error
    iDVD: Burn failed, Wed Aug 31 21:45:29 2005
    iDVD: Burn sense: 3/0C/00 Medium Error, Write error
    iDVD: Burn error: 0x8002006E The burn failed because of a medium write error.

    How about making a disk image and then burning a DVD from thisone ?
    That's what I'll be doing in the future. Would love to know what's causing the issue though.
    a. Did You do a clean install of OS X.4.2 ?
    New G5 came installed with Tiger. Used Combo Updaters to got to x.4.2 (don't trust software update for OS updates).
    b. Did You do likevice with QT. 7.0.1 ? (or what QT do You use)
    Yes. QT 7.0.1 but that shouldn't affect iDVD.
    c. What iDVD (5.0.2) ?
    5.0.1. That's the latest as far as I know.
    And I trash prefs just to be sure. Issue is odd since it seems from the log that it sees the media varyingly as 8x or 4x. This is Verbatim 8x media and has been reliable for me for a loong time.

  • IDVD crashes right after clicking "BURN" button!!!

    Hello,
    hope anyone could help me with my urgent problem!
    Just bought a new iBook G4 14.1" about a week ago. I've created a project in iMovie. I've added songs cut the seens and so on.......
    THE PROBLEM:
    after exporting to iDVD everything works fine. I've creted a menu scenes,... evrything (took a lot of time).
    Right, when I click the "BURN " button the whole thing(iDVD) crashes and doesnt even produce an error report, nothing. Just a message saying that iDVD has quit and so on...
    VEry desprate and hope someone could have a suggestion.
    The project is about 1:28 (20GB) in iMOvie and about 7GB in iDVD. i have 20GB of free space on my startup disk, hopefully!
    Thanks again for any suggestions!

    1st troubleshooting step with iDVD:
    Delete the iDVD preference (plist) file (com.apple.iDVD.plist)
    Repair Disk Permissions with Disk Utiltiy in Applications>Utilities
    Then try again....
    1:28 (20GB) in iMOvie and about 7GB in iDVD
    Are you trying to burn this on a double layer or single layer DVD? Go to the project info window and set it correctly.
    John B

  • Dvd burn error--need help with error message

    Ok so I have read all the support articles and many of the discussions already posted...but still can not burn a dvd.
    so, I created a project on idvd, it just has two slideshows that I imported from iphoto. I could not burn the dvd directly from idvd, got the multiplexing/burn error message. I successfully created a disk image and was able to play it on my computer using the dvd player, I then tried to burn it using the disk utility and again got an error message after it started the writing proccess...the error said "The devise failed to calibrate the laser power level for this media" Does anyone know what this means??? I have lots of room on my hard drive and am using DVD-R sony dvds. Any help would be greatly appreciated!!!

    Hi Becca:
    Just click on the little  in the upper left-hand corner, click ' About this Mac', More Info..and open your System Profiler. Under ATA you should se something like this:
    MATSHITA DVD-R UJ-825:
    Manufacturer: MATSHITA
    Model: MATSHITA DVD-R UJ-825
    Revision: DBN7
    Serial Number:
    ---> Drive Type: CD-RW/DVD-RW
    Disc Burning: Apple Supported/Shipped
    Removable Media: Yes
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    That will tell you.
    Sue

  • I have FCE 4.0.1 and running OS x 10.7.5  when i burn my movie the audio from my movie clips don't come through .  My Sound effects and music can be heard.  I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it.

    I have FCE 4.0.1 and running OS x 10.7.5  when i burn my movie the audio from my movie clips don't come through .  My Sound effects and music can be heard.  First I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it.  everything sounds great in preview but then ( once again)I lose my audio from my movie clips.

    Try Mixing Down the audio before export.
    This info may help;
    https://discussions.apple.com/message/1060680?messageID=1060680&amp%3b#1060680
    Also serch this forum for Mix Down you should find lots of info.
    Al

Maybe you are looking for