IDVD 5 and various players

I'm about to burn my cinematic opus to disc using iDVD..
I tried yesterday, and basically succeeded, except that the disc was "unreadable" on our Playstation, which we use to play store-bought movies on DVD.
Is there something I can do in prepping this project or burning it which will ensure compatibility with the greatest number of players out there?
thanks!
r

You may want to try saving as disk image to test before burning-
http://docs.info.apple.com/article.html?artnum=164927
I use Verbatim DVD-R ands have never had a problem...
Sue

Similar Messages

IMovie - iDVD and a NTSC versus PAL question

I have some questions about creating iMovie for use in iDVD and about the various formats. Here goes:
I have a large number of travel photos taken in various cities that I need to use to create a project in iMovie. In addition, I have a couple of smallish video segments that go with each of these cities. I want to be able to get to any section from the DVD menus. The sections being defined as the either the videos or the photos for each individual city. Also, I need to be able to create both NTSC and PAL formatted DVD's from this exercise.
Now, as I understand it, there's several ways I can approach this:
First, I can use iMovie to create discreet projects for each segment. The individual city videos being one type. The photo shows of the individual cities being another type. Then export each of these via the media browser and import them individually into iDVD. But that then begs the question of NTSC versus PAL. Since I have to choose a project format in iMovie (NTSC or PAL), does that imply that I've got to have separate projects for each one of the cities NTSC or PAL versions? Or can I just use the NTSC project and cut the DVD in either NTSC or PAL format based on the settings in iDVD? If I use this route, what's the best export format to use for optimal appearance on the finished DVD?
Second, I can create one long project in iMovie. Put chapter markers in it and export it to the media browser. Then, import it into iDVD and use the chapter markers referenced from the various menu picks. If I go this route, once again, how do I account for the NTSC versus PAL differences? And again, what's the best export settings for optimal viewing?
I guess much of this question relates to the issue of having to specify a format in both iMovie and iDVD. If I choose NTSC in iMovie, but use PAL in iDVD, other than the obvious format mismatch, what actually happens by doing this? Or, turn it around. Use PAL in iMovie and NTSC in iDVD. Again, what's the ramifications of doing this?
Just trying to figure out the best way of going about this and what the tradeoffs are for each approach. Any insight you can offer would be greatly appreciated. Oh... and sorry to have been so long winded.
Many thanks in advance,
Tom

Hi
Oh Dear. Is this an assigned task from an editing turor. Then He/She is mean.
a. If You want a DVD - Then You should not use iMovie'08 or 09 or 11 as they can not export interlaced video to iDVD as it needs but discard every second line resulting in a less quality DVD. Use (for SlideShows and Movies)
• iMovie up to HD6 (SlideShows or Movie) - or -
• FinalCut any version (SlideShows or Movie) - or -
• FotoMagico (if You make only a SlideShow - can not do movies)
If persisting with iMovie'08-11 - Then DO NOT use "Share to iDVD" from within any version of iMovie (not 3 - HD6 either) as they do a bad job. But in iM'08-11 "Share to Media Browser" and as Large. In iM HD6 or FCE/P Save as QuickTime .mov and import this into iDVD.
b. NTSC and PAL - If DVD is to be sent to EU (PAL) - then most DVD-players also playback NTSC so conversion is not needed (mostly).
There are NO way to make a combo version PAL & NTSC - They do not exist.
If You make a PAL iMovie /FC project - then DO NOT let iDVD convert to NTSC (or other way either)
• it can do so - BUT Result is severely BAD
I use JES_Deinterlacer to make the conversion and it's so much better. (free on internet)
But absolutly best result is by doing two versions in the movie-editor - one PAL and one NTSC version.
c. Use High quality DVD brand - I only use Verbatim DVD-R
and set down burn speed to x4 - Less burn errors and plays on many more Players.
Just to start with.
Take one Q at a time and we can fix this.
Yours Bengt W

IDVD and region code???

I started a project in iDVD and created/burnt a DVD. I live in Germany and sent this DVD to a friend of mine who lives in USA. Half a year ago I already sent her a DVD which I had created in iDVD - she could watch the DVD without any problem (no region code question appeared). But with my last DVD this question suddenly appeard !!!!!!!! What the ....?
Questions:
1.) Does anybody else have this problem?
2.) Dows anybody know what to do so there is no question for a regional code for a DVD which was created in iDVD??
Thanks for your help.
greez
fenderkicker

Hi Fenderkicker and welcome to the forums!
DVDs made with iDVD are so-called 'Region 0" (no specific region) and will play anywhere without upsetting region settings.
In the USA they use NTSC (29.75 fps) whilst in Europe we use PAL (25 fps). Most freestanding DVD players sold in Europe will happily play back both, but this is not the case in the US where few DVD players are set for PAL playback.
Could this be the issue? That your first DVD was in NTSC and the second in PAL?

Is there some DVD software available on the Mac that can be played universally across Windows and DVD players?

I am struggling to play DVD slideshows on other windows computers and DVD players?
Thanks
Toni

As far as Windows computers they must have software that can play commercial DVDs.
What you can do to improve the compatibility of your iDVD disks is to follow this workflow to help ensure the best quality final product:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

I made a slide show using imovie. When I play it back on my imac, the slideshow looks perfect. However when I burned in via iDVD and play the disc, the resolution drops off. The video appears fuzzy and not sharp. Any ideas why?

I made a slide show using imovie. When I play it back on my imac, the slide show is crystal clear and sharp. I burned a disc of the slide show using iDVD. When I played the dvd the resolution is very poor. Fuzzy and shakey images. I tried various solutions, Apple tec told me to go to preferences on iDVD and select "professional" to get higher resolution. Tried that but results still the same. Any ideas?

When you play on your Mac, you can have resolution up to 1920x1080.
When you burn to iDVD you convert to 640x480.

IDVD and aftermarket DVD burners

I don't have a SuperDrive on my mac. Can I use iDVD and burn to an external DVD burner? I am so new to all of this so any help is appreciated.

Having hung around this forum for a few years, I would agree that LaCie is a very wise choice. That said, a number of LaCie users, even since iDVD5 came out, have come to this forum looking for support. A LaCie Tech, that frequents this forum (http://discussions.apple.com/profile.jspa?userID=93299) or other users have usually been able to help them out, but a number have needed updated disk burning profiles. Just search this forum for LaCie. They may be all inlcuded in 10.4.x, but many users are still using 10.3 and prior, where profiles may be needed.
And I still say the image route has other advantages you are overlooking. 1) the ability to view the final encoded product, 2)the ability to burn at slower speeds for greater reliability on other DVD players, and 3) the ability to do whatever you like while iDVD is encoding, and then let Disk Utility or Toast have your machine to itself while burning. Plus I archive my images on other external drives.
I think the LaCie tech himself has said as much here:
http://discussions.apple.com/thread.jspa?messageID=1017511&#1017511
Cache cleaning is certainly a good idea, but I don't usually do it for every burn (or image encode).
John B.
G5dual2GHz, 550TiBook, 9600>G3Upgraded Mac OS X (10.4.2) 1TB+ Storage

IDVD and DVD Studio Pro hang and crash since 10.5.6 update

Seems like there are a lot of problems since this 10.5.6 update... I came here b/c of a prob with iDVD and DVD Studio Pro not working anymore. Was just trying to "Share/Export" an iMovie project to iDVD (and then tried again with DVD Studio Pro) and the program just hung and crashed and also wouldn't let me Restart or Shutdown very easily either. What gives?

nmctech,
Have you tried to reset the SMU/PRAM?
http://support.apple.com/kb/HT1436?viewlocale=en_US
Chris
Message was edited by: 2point5

After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

DVD's are only 640 x 480 (interlaced), so yes, the quality is not nearly as good. You should probably create your .mov in DV format to best match the DVD format

I am trying to send an iMovie project to iDVD and I keep getting the following error msg. "Unable to prepare subject for publishing: The project could not be prepared for publishing because an error occurred. (-43)"

I am trying to send an iMovie project to iDVD and I keep getting the following error msg. "Unable to prepare subject for publishing: The project could not be prepared for publishing because an error occurred. (-43)"

Check out this thread: https://discussions.apple.com/thread/1421870
It may mean you either your Event or your Project. Have you moved any of the files in the Finder by any chance? That error may come up if you moved anything outside of iMovie. Do you get an error message when you choose Share>Export to iMovie (choose medium size) and save it to the Desktop? If you can export it to the desktop, you can pull that file into iDVD separately and still make it work.

I made and burned a slideshow in iDVD and gave a copy to a friend with a Mac notebook. Is there a way she can put it on her hard drive to make copies of it? Does she need to have iDVD?

I made and burned a slideshow in iDVD and gave a copy to a friend with a Mac notebook. She would like to made copies of it. Can she do it if she doesn't have iDVD?

She can easily make copies of the DVD using Finder:
How to copy previously-burned DVD-R video discs
http://support.apple.com/kb/HT2059

How do i transfer itunes from my old laptop which is broken on to my new laptop. i have set up itunes on my new laptop but not able to access my hot favourites and various apps so want to be able to transfer all info on to new laptop.mark aberdeen.

how do i transfer my itunes account which has hot favourites and various apps from my old laptop on to my new laptop. my old laptop recently broke down and has since been repaired but i am having trouble accessing my itunes. my daughter has set up itunes on the new laptop but we are not able to access all the original details i.e favourites/apps.

Welcome to the discussions and Merry Christmas!
http://discussions.apple.com/thread.jspa?messageID=797534&#797534
The link should do the trick.
JC

I updated my OS from 10.6.4., to 10.8.2 I want to buy iDVD and I Movie, but bought iPhoto and can't get it to work yet. Hesistant to buy the others without now having the original applications on my laptop. Do I need to buy the older versions first?

I updated my OS from 10.6.4., to 10.8.2. I want to buy iDVD and iMovie, but I bought iPhoto and can't get it to work yet. I'm hesitant to buy the others without now having the original applications on my laptop. Do I need to buy the older versions first? They are probably on my Snow Leopard install disc, but I am now running Mt Lion that I bought, and downloaded a few days ago...so I don't want to insert the old OS disc, thinking it might want to reinstall the old OS... Thanks,
KathyH-P

Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Video and audio players will not show in Firefox. Players show in Safari and Chrome. (Mac computers). Do I need a plug-in?

Tested on 3 apple mac computers:
Mac Pro, Mini Mac and Macbook Pro.
Each computer running Mountain Lion and Firefox 11.8.800.94
Video and audio players not showing on website (video player is JWPlayer)
Error on video player placeholder says 'No video with supported format and MIME type found'
When the same site is access via either Chrome or Safari then the video and audio players show with all of the controls.

You get this error if the video tag is used and not an object or embed tag that specifies a Flash player.<br />
So this doesn't look like a problem with the Flash player as it is most likely not used in this case.<br />
If there is fall back code to use a Flash player then it isn't working.
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"

I was having problems burning DVDs' fro iDVD and it turned out my burner is at fault I have a 27 inch iMac using a OPTIARC DVD RW AD-5680H. Where can I buy a replacement in UK?

I was having problems burning DVDs' from iDVD and it turned out my burner is at fault.
I have a 27 inch iMac using a OPTIARC DVD RW AD-5680H. Where can I buy a replacement in UK? I have seen these with SATA is this the correct cable for my mac?
I have also tried the Mac superdrive but my imac wont recognise it as it's been configured for macbook air and mini mac. I know I can "make" it work by doing something or other in com.apple/plist, but dont want to mess about in there.
I'm also told an external drive would work but does "mac compatible" mean only for air and mini as their own superdrive is or all macs?
Any help appreciated before I convince myself mac is no better than windows pc!

Thanks but this didn't really help.
I can buy the drives at a dozen places but none of them seem to know what connection is correct (SATA etc) and that includes the apple store. It was the store who told me buy the superdrive and all my problems would be over. Wrong! It isn't recognised by imac as it's confifured for air and mini mac. Only way to make it work is as i said in earlier post. (Would you be happy buying a car you were told would start and then discover you have to open the bottome and fiddle to make it go?)
The apple store I would not even consider taking it to. Days without the pc, over priced and don't have a good reputation for actually fixing things!
But thanks

Installed iDVD and now I have lost iPhoto

I have an iMac 27" late 2013. I was wanting to burn some dvd's and installed iDVD, while working with iDVD I received a notice that iPhoto could not be opened because it may be damaged or incomplete...Can I get it back???

Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. For iPhoto 9.4.3 and earlier select Size = Medium or Large. For iPhoto 9.5 and later selct 480p.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailer like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.

IDVD 5 and various players

Similar Messages

Maybe you are looking for