IDVD 5 import from iMovie HD audio is garbled

When I use the Create an iDVD project from iMovie HD my audio sounds like it is stretched out (garbled) when I play the preview in iDVD. It seems like everything else is working good. I also get a major hang on the audio encoding but that is another issue as I have read. Why does my audio sound wierd from iDVD when it was fine in iMovie HD? Thanks.

Just to let you know, I think I figured out what to do. I ended up sharing the iMovie HD as a Quicktime movie. Then I opened up iDVD and imported that Quicktime movie. The sound is good on the DVD. I do think there is a problem with the audio encoding between these programs and that is a real issue Apple must address. Let me know if you have solved this issue too. Thanks, Reid

Similar Messages

Importing from iMovie 09

I have iMovie 09 and I just bought Final Cut Express. I created a simple movie in iMovie 09. I exported it as Final Cut XML. I imported the file in Final Cut Express. All as described in the Final Cut Express video tutorial.
However, I just get a "Media Offline" message... the import doesn't seem to work. I have tried this multiple times.
I have tried reconnecting the files, but it doesn't seem to let me select the right file...
Very confused... Is there anything I can do to get this working? (Preferably without having to attempt to reconnect the files)
Thanks!

Thanks Tom.
In the video tutorial it appears as if you do not need to reconnect the files. I assumed that this would only be necessary if the files had been moved, but I didn't move them. I thought that the XML files would include directions to where the video clips are stored. Do you have to manually point to the files every time that you import from iMovie?
My iMovie project is a screen recording. It consists of several .mov files. I have tried removing all the titles / fades / transitions but it still cannot see the video clips when I import them to FCE.
The movie's about 8 minutes long. It's in widescreen. I haven't changed any settings.

Importing from iMovie to FC Express

I have attepted to import AVCHD files from my Canon XA20 Camcorder to FC Express with no success. I then attepted to import the same files into iMovie with success.
I have 2 questions.
1. How can I import AVCHD files direct int FC Express.
2. To import from iMovie to FC Express I cannot find where iMovie video file are on the system. In FCE you can nominate a drive for the files to be put.

That is PAL 25 fps?
The data rate should be fine.
AVCHD is possible to ingest directly to FCE.
Make sure you set the comatching Easy Setup BEFORE trying to capture.
Use Log and transfer over USB cable.
Al

Importing from iMovie 06, lose capture dates

When I import old iMovie 06 movies, the capture dates gets lost. Here is one of the original clips in iMovie 06:
However, after importing in iMovie 11, the capture dates are lost. I tried many variations, like import the iMovie 06 project, or cd to the *.iMovieProject directory and import the actual clips, etc.
Now, good iMovie11 clips have the capture date imbedded in the file name (as in clip-2010-03-14 hh;mm;ss.dv). However, the ones imported from iMovie 06 end up in iMovie 11 with simple names such as clip55.dv. So it's not surprising I cannot see the capture dates in iMovie 11.
So I looked inside the *.iMovieProject directory hoping to find the capture dates either in the file name or in a plist, but I couldn't (nothing in the plists below)
... Jan 23 2010 Cache/Thumbnails.plist
... Jan 23 2010 Cache/Timeline Movie Data.plist
... Jan 23 2010 Cache/Timeline Movie.mov
... Nov 8 2009 Media/Clip55.dv
etc
Finally, I opened Clip55.dv in QuickTime and looked at MovieInspector, but I could not see any capture date (similar to exif in jpegs).
So obviously I missed them. My question is where in the iMovie 06 project can I find them? If accessible, I can write a script to fix the clips imported in iMovie11 by changing their names. I tried it manually, and it worked.
Thanks in advance

Hi - Couple of things.
Click on the offending clip that you imported from iMovie in your FCP Bin and type Command + 9 to see the item properties. Either report those item properties, or if easier, take a screen shot of the item properties and post that.
Then click any where on the timeline you are having trouble with and type Command + 0 (Zero) to see the sequence settings. Either report those settings or take a screen shot of the Sequence Settings window and post that.
In order for FCP to use the video without rendering, both the items properties of the source clip, and the sequence settings must match - and both must be within standard production parameters.
Also, you can click on the source clip in the FCP Bin, then control-click on the clip and select Reveal in Finder from the drop down menu. Once that file is revealed, open it in Quicktime 7 and see if if plays correctly there.
Hope this helps.
MtD

I am trying out Final Cut Pro X and trying desperately to import a project from iMovie 11 (version 9.0.9). There is no export to FCPX in iMovie 11 nor is there import from iMovie in FCPX.

Can someone please help me?
I am trying out Final Cut Pro X on a 30 day trial. So far so good.
I am now trying desperately to import a project from iMovie 11 (version 9.0.9) into FCPX.
I have read multiple posts on this subject and they all recommend File/import/ from iMovie project in FCPX
However there is NO such option under File/import in FCPX - nor is there an option to export to FCPX in iMovie 11
Can anyone please enlighten me.

The current version of FCPX does not work with that version of iMovie. You need version 10.0.3, which allows you to send a project to FCP.

Audio tracks are lost after importing from iMovie...

After importing my movie from iMovie I lost my audio tracks. What is the problem ?

Hello kropacd (and Karsten;)):
I realize at this late time that this will be a pain..but you might want to try to extract your audio prior to exporting (sharing) to iDVD to se if that helps...
The only other thing I can imagine is that you used 12-bit audio in your video instead of 16-bit? It really needs to be 16-bit-check the setting on your camera.
Sue

Importing XLM from iMovie one audio track

Can someone please help me?
When I import my XLM file from iMovie into FCP and open it ... I get one audio track.
This is really weird because in iMovie it's stereo and even the videos in QT are stereo.
Any ideas ?
Thanks in advance.

Hi Michael,
Yes, sorry. I'm using version 4.5, I've not seen this problem before.
I tried extracting and then importing the track in again but that didn't work. I can extract it to a separate clip but there is a lot of editing to be done with lots of changes and continually having to edit a second track would make the job longer.
I was hoping to find a solution in QuickTime where I could change the track ID.
Any thoughts on the version I'm using?
Regards Alan

Importing from Imovie 08 to FCE 4 - problems

Hi
Why cant I import projects from Imovie 08 into FCE 4. According to the manuel it should be possible. All I get is a "File error, wrong type" ????
The manuel:
To open an iMovie project:
1 In Final Cut Express, choose File > Open.
2 In the dialog that appears, select the iMovie project you want to open.
The iMovie project opens in the Browser and contains the sequence and the clips as
they appeared in the iMovie Clips pane.
Important: Final Cut Express does not import iMovie sound effects, audio levels, or
transitions. All other applied effects are imported.
3 Double-click the sequence to open the iMovie project in the Timeline.
4 Render the sequence.

Look at FCE tutorial page:
http://www.apple.com/finalcutexpress/tutorials/
Michel Boissonneault

Can't import from iMovie HD

I can't import my iMovieProject files from iMovie HD (the one that came pre-installed with tiger in '06)
It creates a blank file in iMovie '08.
Any ideas?

Unfortunately you can't. I tried this awhile back and it actually messed up my imovie file completely (good thing I had it back up).
You can still take your iMovie HD project and put it into the new iDVD but you have to export it into a Quicktime movie first.
I hope this helps,
-HookedonMac

When importing from Canon XL2, audio is delayed by 5 seconds

When I import from Canon XL2, the audio track is there, but it is off by a few seconds. At first it was only about 1 or 2 seconds, but when I re-imported it got worse. It's fine when I import through iMovie, but I lose my multiple audio tracks.
I know I can re align on the timeline, but that's not the point!
Thanks for help

You may have nearly filled up your hard disc.
1 hour of DV is about 13GB. Trying to capture a 2nd hour would take you up to about 26GB of space used up on your hard disc.
It's better to capture to an internal disc, or to a FireWire-connected external disc, as USB - even USB 2.0 - can't necessarily keep up with the constantly sustained data throughput speeds which DV needs.
A Mac needs about 10% of your total hard disc space to be empty, to allow for its internal 'housekeeping', log files, virtual memory files, etc. So if you have an 80GB internal disc, with, say, 13GB of operating system & programs, plus, say, 20GB of pictures, plus, say, 13GB of documents, and you add 13GB (1 hour's worth) of video, that's 59GB, and you'll need about 8GB of free space, that's 67GB accounted for, leaving about 13GB empty for your 2nd hour.
But that spare 13GB of spare space may be scattered around the disc, and not all in one sequential region, which may be why you're getting stuttering.
Not only that, but there may be 'dropouts' on the tape (brief signal disappearance) which may not show on the camcorder (..because many camcorders substitute a previous frame of video for any damaged frame..) but may only show up when you try importing. This may happen if, for instance, you recorded at a slower than normal speed, e.g; LP speed instead of Standard Play speed.
So check, first, how much empty space you have on your internal disc, and see if your external disc can be attached by FireWire, instead of the - what's becoming almost ubiquitous - USB connection.

Importing from iMovie to FCP -- Timeline

I've been using iMovie and am about to upgrade to FCP. If I import an iMovie project file into FCP, does it import the clips and the timeline/editorial layout? In other words, will I be able to see my layout/edits in the FCP timeline, or will FCP only import the actual clip files into the browser, and then I have to manually reorder everything?
Powerbook G4 Mac OS X (10.4)

1) If I wanted to give it a try and pull my iMovie into FCP, will the timeline also import?
2) If I follow your advice and convert the clips to .mov files...I have one more question: Say I captured a 1 minute clip from my video camera into iMovie. I then trimmed and slipt that clip into a 30 second segment. Is there anyway to access JUST that 30 second segment/new clip and convert to .mov? I can only seem to locate the original 1 minute dv file I imported.
Thanks!

Importing from iMovie HD project

I bought a new iMac and i'm importing in iMovie 08 a project from iMovie06.
But i have 2 problems: first not all the clips are imported and second that the clips that are imported are not in the same order of the original projct.
Does anyone have any ideas?

If in iMovie 06 have a project with 20 clip in iMovie 08 found less clips but everyone is complete. Entire clips are missing.
1) If you are counting "rendered" clips in the "Project.PKG > Media folder," they are not included in the import. You will have o move them manually if you want them.
2) If you are counting clips included in the source bin, then I don't know if they are supposed to import or not. (I.e., I don't use the built-in HD import option in iMovie '08.) You can check and see if these are your missing clips. if they are, then add them to the HD project before import and see if they are imported to iMovie '08. If they aren't, then you may need to send a feedback to Apple regarding this issue.
And the order in which are imported is not the same as in the original project
Editing and rendering in an iMovie HD project will change the clip names which, in turn, may re-order the files as the finder "sees" them. (I.e., they are ordered alphabetically in the project media folder.) So, if they are imported in alphabetical order, they would be out of their original "source" or timeline order.

Importing from imovie to HD

Im sorry if this is has been already answered, but its 4am here in aus and I just want to finish this schoolies project and then go to bed. Can anyone help me? When I try to import my movie from imovie to imovie HD this message comes up - The file could not be imported" "the file macintosh HD/users/computername/Movies/iMovie projects/" cannot be imported, quicktime couldn't parse it: -43
anyone got any idea what this means? I would really appreciate an answer. Thanks!

So I decided to export the file to the desktop and hope that that works out, if not then hopefully someone will have suggested another way to get around this problem other then starting the whole project again. Thanks again.

Importing from iMovie HD is not bringing any of my edits!

According to the iMovie 09 help file:
"When you import video from iMovie HD projects:
- All clips from the clip viewer are added to a new Event.
- All clips from the timeline are added to a new project."
But when I import, ALL my work is lost. I get one long event that is the original source and NOTHING else. No new project s created, even though there is stuff in the timeline. (Stuff that took hours to create.) Is the help file lying? Did I really just loose hours of work?

I have exactly the same problem >:-(
The only solution I can think of is exporting each clip, one by one, to full quality QuickTime files, then importing those into iMovie 09. I'm doing that now (roughly 100 clips. Grrrr...)

Importing from iMovie 08 to FCE4 - aspect ratio!!

Hello All,
I have clips recorded in iMovie 08 (captured from built-in iSight cam) which I'm trying to import into FCE4. Using the standard FCP XML export in iMovie and opening in FCE4, the aspect ratio of all clips is lost.
I am using the built-in iSight cam to record a video blog (please don't give me flack about not using a dedicated cam), is there a way to preserve the 16:9 aspect ratio from iMovie? I have used the motion settings on the clips to attempt to restore the original aspect ratio (-33 seems to be close), but this seems terribly unscientific and mostly guess work. Thanks.

In the browser (view as list) check the Anamorphic Flag associated with both the imported clip and your sequence: both should be set. My guess your sequence is not 16:9, in this case you only have to set that flag in the browser to fix it.
Setting Aspect Ratio = -33 in the Motion tab restores the right proportions of the original video but creates top and bottom bands in a standard 4:3 video and reduces the original video vertical resolution. The anamorphic flag, instead, fixes the video aspect ratio without losing video quality.
Hope it works
Piero

IDVD 5 import from iMovie HD audio is garbled

Similar Messages

Maybe you are looking for