IDVD 6 problems - crashes and bizarre memory error

I've got an iMovie project that I'm trying to put to disc with iDVD. On my MDD G4 with an ATI9800 it just crashes out after a certain period of time whilst doing the menus.
EXCBADACCESS (0x0001)
KERNPROTECTIONFAILURE (0x0002) at 0x00000000
Thread 12 Crashed:
0 CFUniCharDecompose + 208
1 CFStringGetFileSystemRepresentation + 432
2 _CFStringGetFileSystemRepresentation + 16
3 -[NSFileManager getFileSystemRepresentation:maxLength:withPath:] + 92
4 -[NSFileManager fileSystemRepresentationWithPath:] + 176
5 +[NSFileAttributes attributesAtPath:traverseLink:] + 164
6 -[MediaGrabberiMovie _createMediaFolderForPath:] + 608
7 -[MediaGrabberiMovie _createMediaFolderForPath:] + 1592
8 -[MediaGrabberiMovie _createMediaFolderForPath:] + 1592
9 -[MediaGrabberiMovie _createMediaFolderForPath:] + 1592
Same every time. I then tried on my G4 mini. Very slow, but it did get further. However, once it tried to render the movie it aborted. Trying again it claimed there was insufficient disk space.
Here's a screenshot: http://weatherley.net/pics/idvd.png
Any ideas on how to fit 17,126,309,111 GB of storage into a mini? Or perhaps Apple could fix iDVD so that it works on my poor old G4s.
G4 MDD, G4 mini Mac OS X (10.4.8)

The iMovie project that I'm sending to iDVD is about an hour of PAL DV. The free space on the mini is as claimed in the error dialog I posted, about 26GB. The MDD has shedloads of space (>100GB), but always crashes early on with the stacktrace I posted earlier.
All the source material and iLife tools are on the MDD. I was running things across the network from the mini, and attempting to save the diskimage generated by iDVD on the mini itself.

Similar Messages

IPad Air crashes with low memory error in Google Translate Web Site

My new iPad Air crashes with low memory error every time I try to use my Phrasebook in Google Translate Web site. This is rather disapointing considering that my old Nexus 10, that iPad Air is supposed to replace, works flawlessly in Google Translate Web site. Perhaps this has to do with the rather limited RAM (1GB) that iPad Air is equippoed with.
I would appreciate any recommendation, Thanks in advance.

See this topic in
https://discussions.apple.com/message/24758170?ac_cid=tw123456#24758170
And other threads
Good luck.

No sound in Browsers and low memory errors for Snood and Ultimate Solitaire

No sound in Browsers and low memory errors for Snood and Ultimate Solitaire. Those are what I'm experiancing. The no sound happens in Safari, Firefox and Opera. Both Snood and Ultimate Solitaire won't load because of 'Not Enough Memory' yet I have 2gigs. Other applications work fine with sound. ie iTunes, GarageBand, etc are ok. I've deleted Snood Prefs with no effect. Any ideas?
thanks

No sound in Browsers and low memory errors for Snood and Ultimate Solitaire. Those are what I'm experiancing. The no sound happens in Safari, Firefox and Opera. Both Snood and Ultimate Solitaire won't load because of 'Not Enough Memory' yet I have 2gigs. Other applications work fine with sound. ie iTunes, GarageBand, etc are ok. I've deleted Snood Prefs with no effect. Any ideas?
thanks

Remote Control crashes randomly with memory error

During authentication, but most usually during disconnection Remote Control (using Consoleone) will crash with the following error:
RCConsole.exe - Application Error
The instruction at "0x10002834" referenced memory at "0x0000000c". The memory could not be "read".
Click on OK to terminate the program
Click on CANCEL to debug the program
OK Cancel
I tries searching Google and a few other engines with no luck, has anyone seen this before?

The only time that I've seen the error that's listed below is from running ConsoleOne from a UNC path. Try copying all files and folders from \\servername\SYS\PUBLIC\mgmt\ConsoleOne\1.2 to c:\1.2, and then try running c:\1.2\bin\consoleone.exe. Doing so has fixed this error for me in the past
Tim
Originally Posted by bsecrist
During authentication, but most usually during disconnection Remote Control (using Consoleone) will crash with the following error:
RCConsole.exe - Application Error
The instruction at "0x10002834" referenced memory at "0x0000000c". The memory could not be "read".
Click on OK to terminate the program
Click on CANCEL to debug the program
OK Cancel
I tries searching Google and a few other engines with no luck, has anyone seen this before?

N8 problems crashing and freezing

My N8 is very unstable, keeps crashing and freezing, anyone have this problem?

Yes, it always hang and crash different applications. Often helps anly restart the phone. Often when I run the application displays the white console window, running with words and numbers and have to restart the phone

Power Mac G4 MDD problems with Hardware test Memory errors

I have been troubleshooting slowness and unexplained lockups on my Power Mac G4 MDD. I've had the system since 2002. I tried to run hardware test (the disk that came with my system), and I get an error message at startup:
Invalid Memory Access at %SRRO: 00034870
%SRR1: 00003030
I run mac-boot, and get another memory error
Invalid Memory Access at:
%SRRO: 056106dc
%SRR1: 00003030
Does this mean my memory has gone bad? I don't get any other screens for testing hardware.
The lockups are varied, but many seem to deal with Safari. I have also repaired disk permissions and repaired disk. I then get security error messages when I restart, and I choose to fix them, and things are fine for a while, but then it slows down some and starts locking up again.
Thanks for any suggestions,
Marbot61

Hi Marbot61,
You might be interested in the thread "error when booting from AHT CD" on this forum. Since four different users have had the same error message in two days, perhaps ram chips are actually ok, and there is something else going on with the AHT CD boot process.

HT1338 my macbook crashes and cant send error report, when i try, it says "error report failed"

My macbook crashes and when I start it again, there's a crash report and I click on send to apple, after a minute or so it says failed to send to apple. It has happened many times and I think it's getting worse since I can't send any reports.
What should I do?

Hello Firah,
Don't worry or even bother sending the report, Apple doesn't want to hear about 10.5.x at all... if they eer did.
Copy & Paste a few lines here, maybe a couple dozen, we'll take a look.

Windows 8 crashes and with the error "kernel_security_check_failure" after installing Boot Camp drivers.

Hi!
I've got a new 27" iMac (late 2013), and I was going to install Windows 8.1 (64-bit) to be able to play a few games.
Everything went smoothly (installed normally via Boot Camp Assistant), and after the Windows setup, the Boot Camp drivers needed to be installed. After this, the computer rebooted, but crashed at a blue screen with the error called "kernel_security_check_failure".
It rebooted a few times on its own, but after a few times, I got some options, and I chose to "refresh" the Windows 8 install, meaning it would reset the install while keeping my files (even though I didn't have any, as I never got to use it). This took some time, but it worked, and it booted into W8.
The Boot Camp drivers had been removed though, so I had to reinstall them. After they had reinstalled, the computer rebooted and the same blue screen with the same error hit me.
Something tells me that some of the BC drivers are messing things up. I can't find any information on this elsewhere.
Would it be possible to install only selected drivers, to eventually find out which driver is causing the problem?
All help is greatly appreciated!

I finally gave up, reloaded everything, this time, using WIn 8.1 Pro, not Enterprise. After I did the updates, patches, Norton 360, shut computer down and connected the external drives, and booted up...and got the BSOD. This time, I went to Microsoft and downloaded the Windows Debugger, and think I may have found the problem...NORTON!
Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
Am conrtacting them, but, here's the Debugger output:
Microsoft (R) Windows Debugger Version 6.3.9600.17029 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Dump\MEMORY.DMP]
Kernel Bitmap Dump File: Only kernel address space is available
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
Machine Name:
Kernel base = 0xfffff802`0f87e000 PsLoadedModuleList = 0xfffff802`0fb482d0
Debug session time: Tue Jun 17 00:48:52.131 2014 (UTC - 6:00)
System Uptime: 0 days 0:03:09.864
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis                                    *
Use !analyze -v to get detailed debugging information.
BugCheck 139, {3, ffffd0002852d3e0, ffffd0002852d338, 0}
*** ERROR: Module load completed but symbols could not be loaded for SYMDS64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEFA64.SYS
Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
Followup: MachineOwner
6: kd> !analyze -v
*                        Bugcheck Analysis                                    *
KERNEL_SECURITY_CHECK_FAILURE (139)
A kernel component has corrupted a critical data structure. The corruption
could potentially allow a malicious user to gain control of this machine.
Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: ffffd0002852d3e0, Address of the trap frame for the exception that caused the bugcheck
Arg3: ffffd0002852d338, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved
Debugging Details:
TRAP_FRAME: ffffd0002852d3e0 -- (.trap 0xffffd0002852d3e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffffe00059c129f0 rbx=0000000000000000 rcx=0000000000000003
rdx=ffffe0005718d2a0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8020f9e8cdb rsp=ffffd0002852d570 rbp=0000000000000000
r8=0000000000005aa0 r9=00000000000007ff r10=ffffd00066cc8000
r11=ffffe00059963040 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe cy
nt! ?? ::FNODOBFM::`string'+0x682b:
fffff802`0f9e8cdb cd29            int     29h
Resetting default scope
EXCEPTION_RECORD: ffffd0002852d338 -- (.exr 0xffffd0002852d338)
ExceptionAddress: fffff8020f9e8cdb (nt! ?? ::FNODOBFM::`string'+0x000000000000682b)
   ExceptionCode: c0000409 (Security check failure or stack buffer overrun)
ExceptionFlags: 00000001
NumberParameters: 1
   Parameter[0]: 0000000000000003
DEFAULT_BUCKET_ID: LIST_ENTRY_CORRUPT
BUGCHECK_STR: 0x139
PROCESS_NAME: System
CURRENT_IRQL: 2
ERROR_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_PARAMETER1: 0000000000000003
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
LAST_CONTROL_TRANSFER: from fffff8020f9ddae9 to fffff8020f9d1fa0
STACK_TEXT:
ffffd000`2852d0b8 fffff802`0f9ddae9 : 00000000`00000139 00000000`00000003 ffffd000`2852d3e0 ffffd000`2852d338 : nt!KeBugCheckEx
ffffd000`2852d0c0 fffff802`0f9dde10 : ffffe000`59c8cc40 00000000`00000000 ffffe000`54b71040 fffff800`1d6d40b6 : nt!KiBugCheckDispatch+0x69
ffffd000`2852d200 fffff802`0f9dd034 : 00000000`00000000 00000000`00000000 ffff6d2d`50094127 fffff802`0f81458f : nt!KiFastFailDispatch+0xd0
ffffd000`2852d3e0 fffff802`0f9e8cdb : ffffc000`061df4e0 ffffc000`061df4e0 ffffc000`061dfbf8 00000000`00000000 : nt!KiRaiseSecurityCheckFailure+0xf4
ffffd000`2852d570 fffff800`1d7a0be6 : ffffe000`59e10120 fffff800`1d794388 ffffe000`54dfe9c8 fffff800`1d735f7c : nt! ?? ::FNODOBFM::`string'+0x682b
ffffd000`2852d5a0 fffff800`1d7a54e2 : ffffc000`061df4e0 ffffc000`061dfbf8 ffffc000`061df550 fffff800`1d7367ea : SYMDS64+0x71be6
ffffd000`2852d5d0 fffff800`1d737f20 : ffffc000`061df378 ffffc000`061dfbf8 00000000`00000000 ffffc000`05a9bf18 : SYMDS64+0x764e2
ffffd000`2852d620 fffff800`1d73e171 : ffffc000`051e6a88 ffffc000`05a9bf18 ffffc000`05a9bf18 ffffe000`5988cb00 : SYMDS64+0x8f20
ffffd000`2852d650 fffff800`1d782027 : ffffc000`061ea018 00000000`00000000 ffffe000`58409008 fffff800`1d794388 : SYMDS64+0xf171
ffffd000`2852d680 fffff800`1d79af21 : ffffc000`061ea018 ffffd000`2852d8c9 ffffe000`58409008 00000000`10000004 : SYMDS64+0x53027
ffffd000`2852d6c0 fffff800`1d9a3bb3 : ffffe000`58409078 fffff800`1d98b3e8 ffffe000`58409008 ffffd000`2852d8c9 : SYMDS64+0x6bf21
ffffd000`2852d6f0 fffff800`1d9a91fa : ffffe000`5840a1a8 ffffe000`58409008 00000000`00000000 ffffe000`00000000 : SYMEFA64+0xe9bb3
ffffd000`2852d720 fffff800`1d9ae015 : 00000000`00000000 00000000`00000000 ffffd000`2852d8c9 ffffe000`58a10e60 : SYMEFA64+0xef1fa
ffffd000`2852d760 fffff800`1d9adf4c : 00000000`01820201 ffffe000`58a10e60 ffffe000`58a10e60 ffffe000`58a10be0 : SYMEFA64+0xf4015
ffffd000`2852d790 fffff800`1d9b294c : ffffe000`59e0a150 ffffe000`58a10e60 ffffe000`5988ca80 ffffe000`58a10e60 : SYMEFA64+0xf3f4c
ffffd000`2852d7c0 fffff800`1d9a2435 : ffffd000`2852d8a0 ffffe000`599a4010 ffffd000`00000000 ffffe000`59e0a010 : SYMEFA64+0xf894c
ffffd000`2852d7f0 fffff800`1d6d528a : 00000000`00000000 ffffe000`59e0a070 ffffe000`5604e300 ffffe000`58a10e60 : SYMEFA64+0xe8435
ffffd000`2852d820 fffff800`1d71bf76 : ffffd000`2852d960 00000000`00000000 ffffe000`5604f900 ffffe000`571dab10 : fltmgr!FltpPerformPreCallbacks+0x31a
ffffd000`2852d930 fffff800`1d6d413a : ffffe000`57170dd0 ffffe000`571dabd0 ffffe000`59cf18c0 fffff802`0fd411a7 : fltmgr!FltpProcessShutdownRequest+0x122
ffffd000`2852d9b0 fffff802`0fbf7518 : ffffe000`57170dd0 00000000`00000001 ffffe000`571dabd0 fffff802`0fb54a90 : fltmgr!FltpDispatch+0x13a
ffffd000`2852da10 fffff802`0fbf7273 : 00000000`00000001 00000000`00000000 00000000`00000001 00000000`00000000 : nt!IopShutdownBaseFileSystems+0xb8
ffffd000`2852da90 fffff802`0fbfb722 : fffff802`0fbfb4b0 00000000`00000000 ffffe000`59963040 ffffe000`59963040 : nt!IoShutdownSystem+0x127
ffffd000`2852db10 fffff802`0f8d1adb : fffff802`0fbfb4b0 ffffd000`2852dbd0 00000000`00000000 ffffe000`59963040 : nt!PopGracefulShutdown+0x272
ffffd000`2852db50 fffff802`0f94d794 : ffffe000`59965800 ffffe000`59963040 ffffe000`59963040 ffffe000`54b71040 : nt!ExpWorkerThread+0x293
ffffd000`2852dc00 fffff802`0f9d85c6 : ffffd000`66c40180 ffffe000`59963040 ffffe000`59965800 00000000`00000000 : nt!PspSystemThreadStartup+0x58
ffffd000`2852dc60 00000000`00000000 : ffffd000`2852e000 ffffd000`28528000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
SYMDS64+71be6
fffff800`1d7a0be6 33d2            xor     edx,edx
SYMBOL_STACK_INDEX: 5
SYMBOL_NAME: SYMDS64+71be6
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: SYMDS64
IMAGE_NAME: SYMDS64.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 51f84c44
FAILURE_BUCKET_ID: 0x139_3_SYMDS64+71be6
BUCKET_ID: 0x139_3_SYMDS64+71be6
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x139_3_symds64+71be6
FAILURE_ID_HASH: {bf9be68b-5f04-08d4-3152-3d420dc362f6}
Followup: MachineOwner

IDVD problem burning and multiplexing - gets stuck but ejects the DVD and the DVD doesn't play

I am having trouble burning DVDs. Everything seems to be working fine during the iDVD project creation. I can watch the movie and select scenes within iDVD. Then, when I go to burn the DVD, it gets stuck at the burning/multiplexing stage - the wheel just keeps spinning and says there is about a minute left. Yet it ejects the DVD and the DVD won't play when inserted into a DVD player. It will show the intro and the scene selection pages but when you click on one of the scenes, it gets stuck and doesn't play. I have already uninstalled and reinstalled iDVD. The problem persists. It seems like the burner itself is the problem. What can I do to fix it? I have Mac OS X Version 10.6.8 with a 2.8 GHzintel Core 2 Duo and iDVD version 7.0.4.

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

LabView Crashing and compile server error.

Hi,
I'm having some errors when I compile code for my FPGA (PXI-7831R). I am using LabView 8.2.1.
Sometimes labView crashes completely and sometimes it comes up with a compile server error.
My code contains 3 VI's. The first send sends digital output and reads digital input 10 times and then called another VI to save these results. The second VI repeats the first VI 10 times.
When the first VI is compiled on its own it works (including the saving data VI which saves it to a FIFO) but when the second VI is compiled, that is when it errors.
I have attached the compile server errors and the screen dumps of when labView crashes.
Can anyone suggest what I am doing wrong?
Thanks.

ok. Let me try and make my problem a little clearer....
I have now combined all the VI's into one.
It is supposed to write to the digital output and read from the digital outputs 10times at a rate of 10us and store the data to the FIFO. This process is then repeated at a rate of 80ms for 8 times.
I have attached a word document with an explanation on the error.
Attachments:
lvlog07-26-07-12-04-50.txt ‏3 KB
Problem Explaination.doc ‏61 KB
f623_appcompat.txt ‏93 KB

PHP 5.0.0RC3 and Oracle Memory Errors

I have been getting Apache.exe Application Errors as I am testing PHP5. The exact error message is: The instruction at "0x77f83aed" referenced memory at "0x00080000". The memory could not be "written".
Environment:
OS: Windows XP Professional with SP1
Server: Apache 1.3.31 (Win32)
PHP Version: 5.0.0RC3
DB: Oracle 8.4.7 on Unix machine.
Script Instructions:
If I run this script and refresh my browser a few times so that this script is re-executed, I will get the error. Please try this out if you have a similar environment and let me know if you see this problem.
Script:
<?php
class Test {
var $_results;
var $_ncount;
function display() {
$conn = oci_connect("scott", "tiger", "your-host-name");
$stmt = oci_parse($conn, "select ENAME from emp");
oci_execute($stmt);
$this->_ncount = oci_fetch_all($stmt, $this->_results);
oci_free_statement($stmt);
oci_close($conn);
for ($i = 0; $i < $this->_ncount; $i++) {
echo $this->_results["ENAME"][$i];
$test = new Test();
$test->display();
?>
My Initial Observation:
It appears that the oci calls in conjunction with a loop functions in php can cause the memory problems. When I remove the for loop. I do not get the problem and if I manually assign the array to $_results without making the call to the oci functions, then I don't get the error.
I would be interested in hearing from any of you that are testing your code against php5.
Regards,
Ben

I have the same problem.
We are running Apache 1.3.31 on W2k and PHP 5.0.1 with simplified code:
<?
$db = oci_connect("scott", "tiger", "");
oci_close($db);
?>
The first time of execution works well. Clicking "Refresh" in the browser leads to the described error.
At first we tested on Apache2, but ist seems to be a problem with the new php_oci8.dll in PHP 5.0.1

Crashing and unresponsive script errors with FF 4 and Yahoo Mail.

When using the new beta version of Yahoo mail I keep getting unresponsive script errors and sometimes it just crashes FF and when I force quit I'm told FF is "not responding".
This only happens with Yahoo mail and only since I've upgraded to FF 4.

Yahoo have posted a solution to this problem on their site.
Hopefully this works.
[http://help.yahoo.com/l/us/yahoo/mail/yahoomail/settings/technical-13.html]

Xfinity Video Online keeps crashing and giving me error on other attempts.

Here is a common message I keep getting while trying to load a show on Xfinity online: An error occurred while processing your request.Reference #97.55f64317.1436221249.155e7e48 *On occasion, the video will start but then will crash at various points. Any one have or know how to fix this issue.

Let's try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

IDVD 2 crashing and updating?

I'm trying to make a DVD, my first, at home. But every time I press delete in iDVD 2 the program crashes though I worked through that. Now when I try to burn the project it crashes too during the encoding phase. I would like to just update the application but I can't find anything that updates from 2. Is it possible to update from 2 to 6 or to 3 to 4 to 5 to 6? Cause none of the 3-6 updates work/recognize the old application. Thank you.

Hi fireant:
Actually, the only way to upgrade to another iDVD is to purchase the entire iLife package associated with the version you want.
Apple does not directly sell the older versions now-iLife 06 is all they offer. But you can still find older ilife versions on a Google search.
Just be careful if you are planning to upgrade to iLife 06. Check out these requirements:
http://docs.info.apple.com/article.html?artnum=93634
and especially:
http://docs.info.apple.com/article.html?artnum=303683
Sue

IDVD 08 quits and reports "Formatting error"

I've made new DVDs since installing 08 and carried forward older projects, but today both projects report "formatting error" when they reach some point in the burn. Any suggestions? Thanks.
JFT

Question #1: What is the source of this movie? Is it from a minidv camera via firewire? ..... USB 2? ...... or something else?
Most of the time updates and most upgrades proceed rather smoothly when it comes to apple's i-apps / software (But not always). I prefer never to update in the middle of a project. I'll often wait, finish the project with the older version, and then update.
Question # 2: Have you already tried exporting as a QT movie / file and then over to iDvd?

IDVD 6 problems - crashes and bizarre memory error

Similar Messages

Maybe you are looking for