IDVD and DVD-R

I'm new to iDVD but i've succeeded to create a iDVD movie. My problem is that when my Mac asks to put in a empty DVD-R and I do, he eject the DVD and asks to put in a empty DVD. I'm sure that the DVD is empty because when I insert the DVD (while IDVD is not running) he recognize the DVD as empty.
Anyone who can help me?

Are you really using DVD-R? Not DVD+R, DVD-RW, DVD+RW. Some older Macs only recognized DVD-R.
Also, I recommend using only DVD-R for player compatibility. Verbatim is a good brand.

Similar Messages

IDVD and DVD Studio Pro hang and crash since 10.5.6 update

Seems like there are a lot of problems since this 10.5.6 update... I came here b/c of a prob with iDVD and DVD Studio Pro not working anymore. Was just trying to "Share/Export" an iMovie project to iDVD (and then tried again with DVD Studio Pro) and the program just hung and crashed and also wouldn't let me Restart or Shutdown very easily either. What gives?

nmctech,
Have you tried to reset the SMU/PRAM?
http://support.apple.com/kb/HT1436?viewlocale=en_US
Chris
Message was edited by: 2point5

IDVD and DVD+R media

Hi all,
I was wondering if someone could help me. Recently I bought a whole pile of DVD+R discs, however, I find that whenever I go to burn an iDVD project using the DVD+R disc it brings up an error message after it has burnt the disc. I have also noticed that it takes forever to write the 'Lead-in'.
My PowerBook Superdrive definitely supports the DVD+R media as I can backup using the Finder as well as read DVD+R discs burnt using my Acer.
Thanks in advance,
Stu

Stu,
then I'm going to go out and purchase another brand of DVD+R to see if it makes a difference.
What's your fascination for DVD+R? DVD-R and DVD+R are just format wars equally royalties for companies... As I mentioned, DVD-R has been more compatible with DVD players. This advantage is being reduced with newer DVD players built to play both formats; much like the DVD-Audio and SACD format war is leading to "universal" players.

Thoughts on BEST COMPRESSION for use with iDVD and DVD Studio Pro...

Hi all...
I'm having an issue with some visual artifacts that are present after burning a dvd using either idvd or dvd studio pro.
My sequence containts footage (h.264) and photographs with titles. The photos (w/moves) look great, very crisp. So do the titles.
However, the video looks awful. Pans and tilts creating streaking, so does any action with the frame.
I don't see this streaking while viewing in the qt window or when previewing the dvd...
I'm exporting as a qt reference using the dv/dvc pro setting, when I check the dvd on an ntsc monitor, the image is very streaky.
Any ideas?
Thanks,
Mark

Are you using FCP?? Then I see why you said QT reference movie... which is the best way. Being more descriptive about your setting when posting a question will return more helpful answers. (editing tool, source materials, machine spec...etc) You said that your footage was h264 and you posted your question in iMovie forum so I couldn't have guessed FCP and DV...
If your sequence is DV on FCP I can't think of anything else but QT reference movie route. I don't understand why your video won't show interlacing in QT player or DVD preview, but perhaps they force deinterlacing for preview, who knows.
You said your DVD looks 'very streaky' on ntsc tv. Is it to the point that it looks unnatural? Is overall motion jerky? If so, perhaps the field order had been messed with and changed. But I'm not quite sure about the exact nature of your problem. Visual problem in a subjective verbal description can be hard to communicate

IDVD and DVD Studio Pro

Is there a way to import a theme from iDVD into DVD Studio Pro? I want to use a theme on iDVD called Revolution, but in iDVD it only has one drop zone for pictures. I have seen this theme used with multiple pictures so there has to be a way to do it. I was wondering if you can somehow get that template into DVD Studio Pro for more customization options.

Importing iDVD Projects and Themes:
DVD Studio Pro 4 can import projects from iDVD 3 and iDVD 4. You can import an iDVD theme by using the theme in a project within iDVD and importing the project into DVD Studio Pro. When creating the project within iDVD, you do not need to use the final assets or make a complete project.
Note: DVD Studio Pro will not import projects from iDVD 1, iDVD 2, and iDVD 5.
In general, iDVD needs to be installed on the same system as DVD Studio Pro. An exception is if you import an iDVD 4 archive project.
To import an iDVD project or archived project into DVD Studio Pro:
1 Do one of the following:
• Choose File > Open.
• Press Command-O.
2 Locate and select the iDVD project or iDVD 4 archive project in the Open dialog, then click Open.
DVD Studio Pro imports the iDVD project.
About the iDVD Project Import:
When DVD Studio Pro imports an iDVD 3 or iDVD 4 project or iDVD 4 archive project, it has standard locations it looks for to find the assets and themes used in the project. This is especially important if the project uses custom themes.
The standard locations that DVD Studio Pro uses are (in this order):
• iDVD project bundle: This is the file created when you save the project.
• [user]/Library/iDVD/Favorites: This folder is located in your home folder.
• [root]/Library/iDVD/Favorites: This folder is located at the root of your disk.
• /Network/Library/iDVD/Favorites: This folder is on a network system specifically configured by your system administrator for this purpose. (This is not the same as having a server networked into your computer.)
• iDVD application bundle: This is the iDVD application file that contains the default theme elements.
Note: When you create an archive project in iDVD 4, you can choose to include the themes and encoded files. For the best portability, you should include both options. This results in a larger archive file, but ensures you can take the file to any DVD Studio Pro system and import it without missing assets. If you do not choose to include the themes and encoded files in the archive file, those assets must be available in one of the standard locations. If your project will have automatically-created chapter index (scene selection) menus based on markers embedded in the video, it can be easier to create these within iDVD prior to importing the project into DVD Studio Pro. This ensures the chapter index menus use the selected theme’s background and include arrow buttons to navigate between the menus.
Important: To ensure all iDVD menu elements import correctly into DVD Studio Pro, you must navigate to each chapter index menu within iDVD before saving the project. This is also true for any menus you add to your iDVD project by clicking the Folder button.
Issues With Importing iDVD Projects:
There are some issues to be aware of when you import iDVD projects:
• If you import an iDVD project with DVD-ROM content, DVD Studio Pro does not update the settings in the Disc Inspector’s General tab to reflect the DVD-ROM content. You must manually select the DVD-ROM layout and choose the folder to include.
• When you create a slideshow in iDVD, you can add arrow buttons to each still to provide viewers with an additional method of jumping to the previous and next stills. These arrow buttons are not imported when you import an iDVD project into DVD Studio Pro. The viewer must use the Previous and Next buttons on the DVD player’s remote control to jump between stills.
• The button highlights used in iDVD may look different when imported into
DVD Studio Pro. In most cases, the text in the buttons is set to be included in the highlight. Additionally, buttons that use an underline in iDVD will not have an underline when imported into DVD Studio Pro.
• When you import an iDVD project, you may find that the button that is highlighted by default on some menus changes. During the project import, DVD Studio Pro numbers the buttons on each menu and highlights button 1 by default. You can assign any button on a menu to be the default button in the Menu tab in the Menu Inspector.
• If you import an iDVD project that contains a drop zone configured as a slideshow and has multiple slides assigned to it, DVD Studio Pro only shows the slideshow’s first slide in the drop zone.
Source: +DVD Studio Pro user manual.+

Quality differences between iDVD and DVD Pro

Are there any differences in viewing quality between using iDVD or DVD pro?
I like using iDVD when I don't need a lot of menues.
Thanks for answers.
Robert

What I need to know if it is a dramatic different in quality that I should use DVD Pro instead of iDVD.
If you want a DRAMATIC improvement in quality, shoot sharp, high quality content like Hollywood (usually on film) and have it compressed by high quality hardware encoders.
There is a good reason Hollywood DVDs look better than iDVD/DVD Studio Pro DVDs.
F Shippey

Completed QT movie changes format when imported into iDVD and DVD Studio

I made a few movies and I simply want them on a DVD. I convert them into QT movies and everything looks great. I filmed both movie using my Canon Vixia M30 in 60i and maximum quality. When I move the files into iDVD, it squishes the actual movie into 4:3 even though the original QT movie is 16:9 and iDVD is set up for 16:9 and the quality is horrible. I check the "Project Info" and my 3.1GB file has shrunk down to a 376MB file. I tried to put the file into DVD Studio and the same thing happened.This has happened with the last two movies I made. I'm really getting frustrated. What am I doing wrong? Help!!

A DVD uses the highly compressed MPEG2 codec. So it is impossible to have it look exactly the same.
Nothing you can do about that, the DVD video specification is strictly set out.
First of all, export from FCP. Self contained with Current Settings (same as the Timeline).
Bring that file into Compressor and apply one of the time based DVD presets that the running time of your video fits into -for example: *DVD 90 mins Best Quality 16:9*. Import the resulting MPEG2 and AC3 files into DVD Studio Pro. You must also tell DVD SP that your film is 16:9.

Does iDVD and DVD Studio Pro use the same encoder?

I have a video I shot in 1080p and it looks great on screen. When I use iDVD to make a quick playable DVD of it (as i have done with many other projects) I'm not happy with the results. It is only about 8 minutes long so there shouldn't be issues with extra compression to get it to fit on the disc.
So I'm thinking of redoing it in DVD Studio Pro, but won't bother if they both use the same MPEG-2 encoding methods. Any thoughts?
Thanks in advance,
Mark

Videodude, Compressor isn't necessary since iDVD will do the compression for you. But I wasn't happy with the standard def quality I was getting so Mish recommended using manual settings in Compressor and exporting the MPEG2 files needed to burn to DVD. Since Compressor created the files I used DVD Studio Pro to master my DVD.
You should be able to burn a HD disc through iDVD if you have a BlueRay burner. But keep in mind that not everyone has BlueRay and the discs aren't cheap. Be a shame if you handed out discs that no one could use.
As a side note, I used Mish's advice and am really happy with the quality of video I'm getting now. I can only guess that iDVD over compressed the video so it could squeeze two hours on a DVD, even though my video was only 10 min.
Mark

After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

DVD's are only 640 x 480 (interlaced), so yes, the quality is not nearly as good. You should probably create your .mov in DV format to best match the DVD format

I am try to burn a dvd from iPhoto in iDVD, when I click burn I get error message I don't have SuperDrive and dvd is ejected. I have burned dvd's before. What am I doing wrong?

I am try to burn a iPhoto slideshow on to a dvd in iDVD, when I click burn I get error message and dvd is ejected. I have burned dvd's before. What am I doing wrong?

error message I don't have SuperDrive and dvd is ejected
If you don't have a SuperDrive you will not be able to burn DVDs.
Did iDVD come preinstalled on your Mac? If it did then you should have a SuperDrive and be able to burn DVDS. Check the Disk Burning section of System Information
to see what you can read and write with your optical drive:
OT

I was having problems burning DVDs' fro iDVD and it turned out my burner is at fault I have a 27 inch iMac using a OPTIARC DVD RW AD-5680H. Where can I buy a replacement in UK?

I was having problems burning DVDs' from iDVD and it turned out my burner is at fault.
I have a 27 inch iMac using a OPTIARC DVD RW AD-5680H. Where can I buy a replacement in UK? I have seen these with SATA is this the correct cable for my mac?
I have also tried the Mac superdrive but my imac wont recognise it as it's been configured for macbook air and mini mac. I know I can "make" it work by doing something or other in com.apple/plist, but dont want to mess about in there.
I'm also told an external drive would work but does "mac compatible" mean only for air and mini as their own superdrive is or all macs?
Any help appreciated before I convince myself mac is no better than windows pc!

Thanks but this didn't really help.
I can buy the drives at a dozen places but none of them seem to know what connection is correct (SATA etc) and that includes the apple store. It was the store who told me buy the superdrive and all my problems would be over. Wrong! It isn't recognised by imac as it's confifured for air and mini mac. Only way to make it work is as i said in earlier post. (Would you be happy buying a car you were told would start and then discover you have to open the bottome and fiddle to make it go?)
The apple store I would not even consider taking it to. Days without the pc, over priced and don't have a good reputation for actually fixing things!
But thanks

After creating a slideshow in iDVD and burning it to a blank DVD-R disk, can I later add another slideshow?

After creating a slideshow with my photos in iDVD and burning it to a bland DVD-R disk, can I used the unused space on the disk to add another slideshow at a later date?

Thanks!

Im making a photo slide show using imovie. how will i make a dvd copy that can play in both pc and dvd player. i dont have an idvd anymore. m using a mbp early 2011 osx 10.8.5

im making a photo slide show using imovie. how will i make a dvd copy that can play in both pc and dvd player. i dont have an idvd anymore. m using a mbp early 2011 osx 10.8.5.
after making the photo slide show, i clicked share>export movie. after which i burned using toast. the file became a .mov. i tried playing it in my mac and it worked. my fear now is will it also play in a regular dvd?... i read from google that mov files won't run in dvd players. what format should i convert it to so it'll play in a dvd player. can you suggest a faster way i can burn my projects for it takes me almost an hour to export. im going to make 28 slideshows for my kids in school. *=( if i need to do this process 28 times, i may not be able to finish it on time. please suggest a software or an alternative as to how i should do this... m more comfortable using imovie than iphoto. thanks and i hope to hear from someone soon *=j

Thank you QuickTimeKirk...used toast to burn project... my project was in .mov, i tried to play it a dvd player, it did play... will try again tomorrow using another dvd player just to be sure it'll will really work with dvd players. thank you again for your reply *=)

Can I create a DVD in iDVD and burn it on a PC

My mac mini doesnt have a dvd burner but I love iDVD and would love to make my dvd in it.
After I create the file can I send it to a PC and somehow burn it there?

Sure you can - use save as disk image.
Then do this with the image file:
http://homepage.mac.com/geerlingguy/macsupport/mac_help/pages/0023-convert_dmg_imgiso.html
John B.

I created in iMovie, and extracted audio from one of the clips to use in the title sequence. All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

I created in iMovie, and extracted audio from one of the clips to use in the title sequence. All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

I am on a MacBook Pro with OS 10.6.7 running iMovie '11 and iDVD 7.1.1. Thanks for any input.

IDVD and DVD-R

Similar Messages

Maybe you are looking for