IDVD application does not launch. quits unexpectedly during loading

The iDVD application "unexpectedly quits" when being launched. What can I do to correct this? Penny

iDVD '08: The application may unexpectedly quit when opened for the first time
http://docs.info.apple.com/article.html?artnum=306290
Remember also to delete this file:
com.apple.iDVD.plist
Good luck!

Similar Messages

NI-CAN Bus Monitor Application does not launch

I have just installed a PCI-CAN Series-2 Card. I tested the card installtion through MAX (by running the Self Test). The card passes the test. However, when I try to launch the Bus Monitor Application, there is no response. No error message is displayed, and the application does not launch.
Does anybody know why this would occur? Something that I am missing out during the installation?
Any help will be greatly appreciated.
Thanks.

Hello,
Generally to get the Bus Monitor Application open, all you have to do is right click on the CAN interface that you want to monitor (in MAX) and click on Bus Monitor. If this is what is failing for you, consider trying the following things:
-First, make sure that you have updated information about installed hardware in MAX by pressing the F5 key.
-Run NI-Spy to see if any CAN calls are being made to the NI-CAN Driver. See information about using NI-Spy here: http://zone.ni.com/devzone/conceptd.nsf/webmain/C31BC5FB34DBC0EF86256ADF007B8A47?opendocument
-What version and revision of the CAN driver is currently installed? You check this in Measurement and Automation by expanding the Software branch and clicking on NI-CAN.
-If you can watch your
processes as you try to start Bus Monitor, does a process named nican_bm.exe ever start?
-Additionally, try starting bus monitor from the command prompt by running C:\Program Files\National Instruments\NI-CAN\bin\nican_bm with parameter CAN0 so your command is (without quotes): "nican_bm CAN0".
-If you have a 2 port card, have you successfully been able to run Obj2Obj? I'm curious if your CAN interface is working properly at all. From the NI-CAN\utilities directory, run obj2obj.exe with a correctly terminated cable connecting both ports of your CAN card.
Let me know the results of this if you are still having problems.
Thanks,
Scott B.
Applications Engineer
National Instruments

HT1941 Hi i have recently updated my version of iTunes in order to sync music from my macbook air to my new ipod shuffle. After a successful installation the application does not launch and I am unable to oepn iTunes of access my music! Someone please hel

Hi,
I have recently updated my iTunes to the latest version in order to sync music onto my new ipod shuffle. However after a successful installation the application does not launch or open? There are no error messages. The application is just unresponsive.
I have already checked the compatibility with Safari, my operating system and checked my firewall is not blocking it - all is fine.
Does anyone have any other resolutions?
Many thanks

Hi Carolyn,
Thank you for your time and response. The trouble is I am unable to launch iTunes? I have restarted my macbook air a number of times to try and initiate the application but the issue persists and the application remains unresponsive. Will not launch?
Thanks

After upgrading to iTunes 11 application does not launch and is disrupting other programs

Hello!
I have trying to solve this problem all day:
After updating to iTunes 11 this morning, the application does not launch.
Furthermore, Windows Media Player, Win DVD8 and my Email Program fail to launch as well.
I have been through all support pages on iTunes, on support pages on the Windows 7 Forum, and I
read the answers given in the discussion.
I have tried and applied the solutions given, but none of them worked.
What happenes is iTunes tries to launch for a second, then stops, but the process keeps running
in the task manager.
All methods through MSCONFIG failed. Uninstalling and re-installing (in the correct order) iTunes, related
programs and QuickTime failed as well.
I am on a Windows 7 Home Premium 65 bit desktop computer.
Up until the update this morning everything was running fine.
Any suggestions are welcome.
Thank you very much in advance.

Solved it.
I had a program running in the background, which did not get picked up by MSCONFIG.
I looked at the services on CCCleaner and there they were, many instances of this program, slowing the
computer down and preventing other programs (including iTunes) from functioning.
Turned them all off, and iTunes and all other pgms work again.

Email application does not launch

Hi,
I am using abode reader x, windows 7 & outlook 2010. When I attach a pdf to an email through the abdoe program & press attach, it reads "launching email applciation", but nothing then happens.
Can anyone assist me with this please?
I have already uninstalled and reinstalled and played with the default program settings.
Thoughts?
Thank you.

Thank you for responding.
Yes, outlook is running.
Some additional information:
Outlook & Word 2010. Excel 2000. I have a program that I have to use that is not compatible with excel 2010. I have tried to rename the mapi32.dll to mapi32old.dll, but Windows 7 prohibited me from making that change. I have also have tried to use fixmapi.exe, but the application does not run, despite the fact that I have administrator settings.
I had the exact same configuration on my previous computer (which was new, but returned for other reasons) and I was able to email from word & adobe.

Applications will not open, "quit unexpectedly"

This all started a few months ago after my macbook pro began being extremely slow, giving me the color wheel for literally everything. This propted me to send it into apple care through geeksquad. The repair notes stated "replaced units defective top case, LCD and hard drive, unit is no longer slow or damaged. Passed all MRI tests."
My macbook pro was working fine for a few weeks and then suddenly it would not start up "Spotify" and the error message popped up as "Spotify quit unexpectedly. This report will be sent to apple.", and would repeat if the "Re-Open" button was clicked. I was ignored this and lived life without Spotify.
The same thing started happening with other apps as well though, including Skype and the Facebook iChat. I ignored this too because my warranty had just run out. Now the same thing is happening with my Adobe Flash Player and I can't even watch Youtube videos... On top of that, my computer is beginning to give me the color wheel again, and i'm scared
I just want my computer to work again, does anybody know what is going on?

Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|n Cause: -' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.

BSP Application does not launch in SAP R/3 4.7

Hi Experts,
We are trying to create a BSP application in SAP R/3 4.7. We are using the MVC architecture for the same. However, we are failing to launch the BSP pages. When the URL is launced either from SAP or directly in IE, the password prompt appears, after entering the user name and password it reappears again for 3 times and then throws a message invalid user name or password. This happens for all User Names. The passwords are correct though.
We have similar BSP Application in our SAP CRM 4.0 box and it works. I do not have much expertise in BSP, thus would want to know whether there are any BASIS settings that could be required in the system before we proceed. How do we know whether the system is compatible to BSP applications. We have even activated the BSP Application in SICF (Default_host -> SAP -> BC -> BSP -> SAP -> <BSP Application Name>). The current Support Pack version on the system are as follows,
SAP_BASIS Release 620 SAPKB62065; SAP_ABA Release 620 SAPKA62065.
Even if we try to launch the standard example BSP applications in the box, even they do not launch. The same problem appears. Do we need to make changes to User Roles level? All these user IDs have SAP ALL access though.
Please let me know how can I sort this out. Also let me know if you would need any further details.
Thanks for your help in advance.
Regards,
Subhrangsu

Hi Subbie,
in transaction SICF navigate to the service default_host->sap->public->ping. Right-click and select "Test Service". If this works then the BSP runtime is working okay.
Then navigate to the service sap->bc->bsp->sap->sbspext_htmlb and try the same there. On this service you will need to enter a username and password.
If all this works then you need to look clser at what you are doing.
Cheers
Graham Robbo

What to do when an application does not launch?

My iTunes Store on my phone keep failing to launch, please help if know what to do

Force Quit.
Press command + option + esc keys together at the same time for about three seconds
Wait.
When Force Quit window appears, select application, if not already.
Press Force Quit button at the bottom of the window.
Wait. Application will quit.
More on this:
http://support.apple.com/kb/HT3411
Activity Monitor ( Task Manager)
Applications > Utilities > Activity Monitor

App-v 4.6: Internet explorer application sequenced, when Internet Explorer is started, application does not launch

Hi,
We have this app-v application which contains an activex component in Internet explorer.
I created a shortcut on Q:\application to Internet Explorer during sequencing what works fine.
The App-v application works fine as long as no Internet Explorer is started. When it IS started, it closes directly.
Please advise.
J.
Jan Hoedt
Update: this is the app-v application log:
[01/11/2014 10:19:25:437 SWAP INF] {hap=2AF:app=Our Application 11.5:tid=195C:usr=marco}
App shut down
[01/11/2014 10:19:29:117 ???? INF] {tid=10E8:usr=marco}
An error occurred while opening the virtual registry (section: 9), rc: 07B01F0C-0000004A
[01/11/2014 10:19:29:157 ???? INF] {tid=10E8}
An error occurred while opening the virtual registry (section: 9), rc: 07B01F0C-0000004A
[01/11/2014 10:19:29:177 SWAP INF] {hap=2B1:app=Our Application 11.5:tid=10E8:usr=marco}
Elapsed time for upload: 0.109 seconds
[01/11/2014 10:19:29:532 SWAP INF] {hap=2B1:app=Our Application 11.5:tid=10E8:usr=marco}
Elapsed time for launch: 0.546 seconds
[01/11/2014 10:19:29:762 SWAP INF] {hap=2B1:app=Our Application 11.5:tid=10E8:usr=marco}
App shut down

Hello,
Add the start-up switch -noframemerging to avoid reusing existing IE sessions.
Details;
http://msdn.microsoft.com/en-us/library/ie/hh826025(v=vs.85).aspx
Nicke Källén | The Knack| Twitter:
@Znackattack

Citrix application does not launch in MAC using Firefox 2.0 and new version not compatible with MAC i am using.Please advice.

I am unable to launch citrix application in MAC using firefox 2.0 and when we try to upgrade Firefox it gives a mssage that new version is not compatible with the MAC i am using.
Please advice as to what can be done and the MAC i am using is a old one.

We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste that into the "Post a Reply" box. (Please don't take a screenshot of your crashes, just copy and paste the ID's. The below image is just an example of what your Firefox screen should look like)
[[Image:aboutcrashesFx29|width=520]]
<br><br>
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article.

Flash Player does not launch full screen upon Windows restart

We have a Flash application file (flash.exe file) saved on the Desktop of our client's 46" touchscreen. We've created a shortcut to the application in the Windows Start/All Programs/Startup menu as we have 4 reboots scheduled during the day for this application. Upon reboot, the application does not launch full screen but if I cancel out of the application through the Task Manager and go to the Startup menu and double click the shortcut to the exe file, the application launches full screen. The size of the screen and application is 1920x1080.
Other information:
Windows XP SP3
Flash Player 10
(Please note I have fixed the Window System Error that you see in this screen shot)
Thank you for your help!

Do you have set it to Maximized ?

Unable to launch PSE12, I sign in, but app does not launch

I double click on the shortcut, I am asked to sign in and when I do, the box disappears and application does not launch.
I have updated the PSE using the Adobe updater, I cleared the preferences file and nothings.
Any suggestions?

If you launch the editor and organizer directly from the .exe/application files do they work?

App-V 5.0 standalone, application executable not launching

Hi
I have sequenced Mozilla firefox using App-v 5.0 sequencer. When I publish the application in standalone mode the application and launch he shortcut the application does not launch. When i check the process i can see that the application process , in this
case 'firefox', has launched but the shortcut to the application does launch in GUI.
I did some test's on the issue and below are the results.
1) If I copy the Root file of my application and paste them some place on the desktop the executable starts to launch.
2) I opened up the bubble and saw that there is a small cross mark on the application executable, which means as per my knowledge that the application exe has not streamed , but I am using the client in standalone mode and not publishing the app from server
so the exe should not have a streaming issue.
3) I tried capturing the application in both VFS and MNT mode but it does not help.
Any suggestions what I can try or what could be the issue here.

if you are running in standalone mode... what is the source of your package. The cross means indeed that the package is not 100% mounted, so:
Add-AppvClientPackage packagae.appv | Publish-AppvClientPackage | Mount-AppvClientPackage
and try again.

Changing Settings for Adobe Crash Reporter -CS4- app does not launch

Attempting to follow instructions on http://kb2.adobe.com/cps/508/cpsid_50879.html
The application does not launch and the page has no directions on what to do then. Reinstall Photoshop?
Thanks in advance.
Photoshop 11.0.4 — 2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.
Wo Tai Lao Le
我太老了

Thank you for the prompt response, guru Cox.
Deleting the com.adobe.crashreporter.plist file had no effect. I have never changed files inside any application bundle; however…
…I was able to launch the Adobe Crash Reporter successfully from inside the Bridge CS4 application bundle. The preferences were already set as desired. Comparing the two Adobe Crash Reporter app icons, I noticed that the one inside the CS4 app bundle (the one that will not launch) has its Owner set to system, while the one inside the Bridge app bundle that launches successfully has it set to myusername. Changing that ownership on the non-launching copy of the crash reporter had no effect. I had Repaired Permissions on the disk a couple of times today, with no effect.
Now I wonder whether it's more prudent to leave things as they are, inasmuch as (1) I can't even remember the last time Photoshop crashed on me (the last time Bridge crashed was in March) and (2) now I know the preferences are set as desired.
Later today I'll try re-installing Ps 11 without un-installing first, and I'll report back.
Thanks again.
Wo Tai Lao Le
我太老了

Launched software update on MacBook v. 10.5.8 during restart, update stalled now nothing will launch-quits unexpectedly. Help!

Launched software update on MacBook v. 10.5.8 during restart, update stalled now nothing will launch-quits unexpectedly. Help!

As long as the report ends up with 'Permissions repair complete' then, as far as permissions go, you are fine. You can ignore the various statements in the report:
Permissions you can ignore on 10.5 onwards:
http://support.apple.com/kb/TS1448
Some general advice on updating Leopard:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).
Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
http://support.apple.com/kb/TS1541?viewlocale=en_US

IDVD application does not launch. quits unexpectedly during loading

Similar Messages

Maybe you are looking for