IDVD aspect ratio

The Quick Time movie on my Desktop is 16:9 and plays fine. When I imported into iDVD the image becomes squeezed (verticaly). I have iDVD version 2.1. I could not find anything in the help manu. Is there a way to change the aspect ratio in iDVD?

What happens if you actually burn the DVD and play that?
iDVD version 4 didn't have support for wide screen aspect ratios. However, if you pull on in while it may be displayed in iDVD all squished up, it might burn to a DVD in that ratio. But I don't know that for sure so you might have to sacrifice a DVD blank to find out.
If you try it, please post back and let us know what happens.
Patrick

Similar Messages

FCS2 export to iDVD aspect ratio problems...

Hi all. Usually would use DVD studio but just wanted a quick test from iDVD. Pretty recent version but can't get 16:9 exports from FCS2 to show in a 16:9 iDVD project. When you play the film it is always 4:3. Any suggestions?

I use a program (script actually) called anamorphisizer.
http://homepage.mac.com/sith33/FileSharing34.html
Drop your file onto that scrip and then take the resulting file into iDVD.
CaptM

Aspect ratio issues in iDVD with mov files exported from FCE

Please help. I believe this is an iDVD bug. I have found some relevant discussion of it on online forums - but have not found a solution that works for me. I am looking for a workaround.
http://discussions.apple.com/thread.jspa?threadID=1356500&tstart=31
PROBLEM STATEMENT:
My 4:3 movies, exported from FCE in QT-with-conversion formats (any 4:3 format) - appear in iDVD with gray side-pillars (as expected for 4:3) AND with a black line (letter-boxing) at top and bottom - as would be for 16:9. It appears the aspect ratio is also distorted i.e. 16:9. (The iDVD project is set to 4:3.)
1- A 4:3 mov file exported from FCE using Quicktime Movie format (no conversion) does not have the problem, but I cannot de-interlace the video using this export mode.
2) A 4:3 mov file exported using QT-with-conversion mode (any 4:3 format) DOES have the problem. I need to use this mode in order to get de-interlace.
(Exception: 640x480 VGA mode does not have the black lines, and it displays correctly in dvd player on my computer screen - but on the TV screen, it crops content from the top and bottom of the movie, so this is not an option.)
3) In Finder, if you click on mov file exported QT-only (no conversion), it opens in the FCE viewer. If you click on mov file exported in any other 4:3 mode, it opens in Quicktime viewer (i.e. there is absolutely something different in the header/ID of these files.)
4) All mov files, regardless of export mode, show correctly in Quicktime viewer - no black line, no distortion. The problem does not occur outside of iDvd.
5) I tried passing the QT-with-conversion mov files through an Inverse-Anamorphicizer (per suggestion on forum - this apparently fixed the problem for some people) but the resulting output mov (i.e. the inverted product) still had the same problem.
I am, so far, left with this trade-off: Give up the de-interlacing, or live with the letter-boxing/ distortion. Neither is acceptable.
I am looking for a workaround:
1) A way to export de-interlaced 4:3 mov from FCE that shows in correct ratio in iDVD
2) A way to "convert" / re-head mov file after exported so that it displays corrrectly (inverse-anamorphicize) so that iDVD reads it correctly
3) Can the mov be de-interlaced after the fact (so I could use QT export without conversion)?
4) Something besides iDVD to put this together - that doesn't have this problem? (I like and want to use the iDVD menu/theme.)
5) Other?????
I also notice that all the QT-with-conversion mov files are 1/3 to 1/2 the size of the QT-only mov file, which is valuable and preferable to me. (I don't see any quality difference in the display...)

In the Preview window > top frame > middle button
do you have correct for pixel aspect ratio checked or not?
!http://i533.photobucket.com/albums/ee340/gogiangigo/Picture1-4.png!

IDVD is producing DVDs which chop the edges off my video. I have tried changing the aspect ratio between 4:3 and 16:9 but it hasn't helped. My TV is definitely on the correct settings. How can I solve this?

iDVD is producing DVDs which chop the edges off my video. I have tried changing the aspect ratio between 4:3 and 16:9 but it hasn't helped. My TV is definitely on the correct settings. How can I solve this?

One way to to put the videos into an iDVD slideshow
and set iDVD's Slideshow preferences to always scale slides to TV Safe Area.
However, some users have reported that the audio quality using this method is lessened. I've not noticed it but then I don't have a good ear when it comes to that sort of thing. If you add more than one video in the same slideshow do not select any transition.
OT

Aspect Ratio Problems with iDVD

I am putting together a video presentation with video from several different sources. I have had a whale of a time getting the video to display uniformly at the same aspect ratio. I put all my separate clips into Quicktime Pro and set the aspect ratio to 960 X 540. FINALLY, in Quicktime Pro I was able to assemble the full video so that ALL the footage played in 960 X 540 and looked seamless. I thought I was in great shape.
Then......I thought I would test the video in iDVD because I need to burn about 40 copies of this presentation. Lo and behold, iDVD takes part of the video footage and somehow changes the aspect ratio of certain footage. Part of the video plays in a small postage stamp area in the upper left of the screen, while other segments play in full widescreen just fine. Obviously, my aspect ratios are still messed up somehow, even though the the entire video plays in full 960 X 540 glory in Quicktime Pro. I'm stumped.
Anybody run across this problem in iDVD before?

Wow, nobody qualified to help me with this problem?
I'm finding out, thanks to more research on my part, that iDVD does not like the aspect ratio of 960 X 540. The only reason I used that setting is because part of of my video has an iMovie 9 "trailer" and iMovie 9's "large" export is set to 960 X 540. The weird thing is iDVD handles segments of my video that is 960X540 just fine, but it completely bungles up the iMovie 9 trailer segment that is 960 X 540.
I have also found in further testing that iDVD does like a .move file in 853 X 480 and displays that aspect ratio in full widescreen glory.
Hopefully this information will help somebody someday avoid the headaches I have had.

Aspect ratio issue when watching 16'9 idvd created DVDs on regular players

I am having problems with the aspect ratio of any DVDs that I burn in iDVD as 16'9 - The original video is 16'9 and edited as such in FCP, then exported with current settings selected and then in iDVD I select a widescreen project - preview of the project is fine and when the DVD is done it plays with the correct aspect ratio if I watch on the computer's internal DVD player - but my issue is when I watch on any regular DVD player (on a widescreen tv of course) all the video looks tall and skinny, including the menu. The only way I found to get the video to look like it's natural proportion is to switch the settings to 4'3 on the DVD player, then it creates almost a "super-widescreen" look where there are bars at the top and bottom of the screen. On the otherhand, when i used to shoot in 4'3 and create DVDs as 4'3 projects, I NEVER had this problem when watching on a regular DVD player on widescreen TV! It would take up the whole screen and look normal (I know it must stretch it to fit, but it wasn't noticable). I thought creating a 16'9 video I should be able to watch on a widescreen TV and it should take up the whole screen and look normal. Please help!

No, that is not the way it should work. This may help:
iDVD: DV widescreen 16:9 workflow from Final Cut Pro
http://support.apple.com/kb/TS2179?viewlocale=en_US
Final Cut Express: DV widescreen 16:9 workflow for iDVD at http://support.apple.com/kb/TS1611
and
Preparing your Final Cut Express or Final Cut Pro movie to work with iDVD at http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6652.html

IDVD gets 4:3 aspect ratio wrong

I am using iDVD 7.1.2 with 10.9.5 on a macbook pro.
I'm trying to make a 4:3 DVD (legacy material, it's 4:3 from old VHS tapes).
I output a .mov file from Final Cut Express. The file plays correctly in Quicktime. I.e. I get the right (4:3) aspect ratio. Quicktime inspector reports the movie format as DV/DVCPRO - NTSC 720x480 ( 853 x 480).
I create a new DVD project, select 4:3 aspect ratio.
I import the movie and it is squeezed horizontally. I.e. the aspect ratio is 3:3 (maybe not precisely, but darned close). Everything is tall and skinny.
I tried changing the project to 16:9, hoping that would stretch things out, but all it did was add dark space on the sides of the video.
I've tried various different output sizes (using quicktime conversion in FCE), to no avail. I always get a 3:3 aspect ratio in iDVD.
I also burned to a disk image and played it with DVDplayer just to make sure that the preview in iDVD wasn't fooling me. It's 3:3, also.
Any ideas on what to do??????? I have a lot of old VHS to convert and would like to get a flow down pretty quick.

OK, I played around with this long enough that I think I have it.
The problem is actually the way I set up the sequence defaults in Final Cut Express (probably would work the same in FCP). I didn't realize I had the sequence set to "DV-NTSC anamorphic". It should have been set to "DV-NTSC".
The result was that I imported a 4:3 .mov file into FCE, where it seemed OK, even in that sequence. However, FCE had inserted black space on the right and left of the 4:3 video, creating a 16:9 video with a 4:3 inside of it and the black bars surrounding the video. When that was imported into iDVD, iDVD forced the whole thing to 4:3, which of course, forced the actual 4:3 video to 3:3. Changing the sequence preset too NTSC solved that problem completely.
One of the things that confused me was that two other DVD authoring programs handled this without obvious problems. Torch and Wondershare DVD converter both displayed the video at 4:3. Also, quicktime displayed it correctly. There were the black bars on the side, but the aspect ratio of the actual picture was correct.
I'm putting this here because I can imagine that some other beginner will confront this someday, and at least here is a record of the problem and the solution.

16x9 aspect ratio quicktime movie switches to 4x3 in idvd

I have a quicktime movie that has a 16x9 aspect ratio. In Info the dimensions show up as 720x480 (853x480) and when opened in Quicktime it is opening in the correct aspect ratio it was created. After bringing the Quicktime movie into an idvd project that was set up for 16x9, when I click on the movie, it shows up as a 4x3 movie, and the images are noticeably distorted. Any ideas on how to resolve this? Thanks.

A solution is to use something called Anamorphizer that sets the file's widescreen flag so that it is recognized as anamorphically squeezed widescreen.
Get Anamorphizer at http://homepage.mac.com/sith33/FileSharing34.html
Make sure Quicktime 7 is open before you try Anamorphizer. (NOTE: You MUST use Quicktime 7 and NOT Quicktime X)
Place a copy of your movie clip in a new folder and drag that clip over the Anamorphizer icon. This should create a second file in that folder that start with Anamorphic- This is the reference movie you drag-and-drop into iDVD. Note that your clip in that folder (which is the movie the reference movie points to, must not be moved or deleted).

Preserving 720x480 square aspect ratio in iDVD

Hi, I posted this question in the iDVD group and was told there might be a FCP answer.
I'm importing a 720x480 (3:2) aspect ratio movie with square pixels into iDVD. iDVD scrunches it up and makes everyone look too tall and thin, though the movie looks fine in QT. Are there any special settings in FCP when exporting that can assure the proper aspect ratio in iDVD? (I was told iDVD only supports 4:3 and 16:9, which may make this a moot question.)
thanks,
Scott

Denis Murphy wrote:
Where did you get this footage by the way? If you're creating square-pixel assets (in photoshop or after effects for example) for a SD NTSC project, you should create them at 720x534 (for 4:3) or 864x480 (for 16:9).
I created it from a FCP sequence with 720x480, square pixels, 24 frames per second. My goal is to output the sequence as a series of Targa still images which can be output to 35mm film. That's why I want the 3:2 ratio rather than 4:3, and I've discovered if I don't use square pixels the Targa still images are distorted.
I was able to get what I wanted in iDVD by 1) outputting my original 720x480 square sequence to quicktime; 2) reimporting it into FCP and inserting it in a 640x480 NTSC-CCIR 601 pixel aspect ratio (kind of like you suggested), 3) exporting that again as quicktime, and 4) importing that file into iDVD. The funny thing is, in the FCP 4:3 sequence the image looks distorted (scrunched from the sides so everyone looks too tall and thin), but when I import it into iDVD it stretches back out to normal again. (When I changed the pixels to square in the Browser before dropping it in the sequence, it looked fine in the sequence but stretched sideways in iDVD. Go figure.)
What a lot of back and forth! But I got what I want, and I thank you for your suggestion.
Now I'd like to figure out how to deal with what I suspect is frame slippage on the DVD from my original 24fps, but I think I can deal with that, as DVD is not the final output.
thanks!
Scott

IMovie iDVD Incorrect aspect ratio of movie within dvd

This query has previously been raised elsewhere in the forum but the proposed solution looks quite complex for an iMac novice like myself.
In summary the movie looks fine when previewed in iDVd however, when burned to disk and then played on my DVD player the sides of the movie have been cropped.
Is there a 'simple' solution to maintaining the original aspect ratio of the footage from iMovie to iDVD?
Is there any s/ware available?
Thanks in advance

Open your Movies Folder. Create a new folder. Name it PROJECTNAME – TS FILES (where ‘projectname’ is the name of your project!). Close the folder. You can of course call it anything you like, but this aids identification.
Now double-click the disk image on your desktop. It contains two folders: AUDIO_TS (which is empty, but please pretend that it isn’t) and VIDEO_TS. Drag and drop these to the folder you created in your Movies Folder. (This takes a moment).
Click on the AUDIO_TS folder and go to Get Info in the file menu. Right down the bottom is where you have to change the permissions. Under ‘Ownership & Permissions’ change this from Read Only to Read & Write. Click the small triangle next to Details, scroll down and click on ‘Apply to enclosed items’. You will be asked for your root password. Close the get info window, and now click on the VIDEO_TS folder and do the same. Close the Projectname-TS Files folder. You have now allowed yourself to change the properties of the contents of those folders, which leads us to the next all-important step.
Open myDVDedit. Go to File and open the projectname TS Files folder. By all means stare at it shock and awe, but don’t bother finding out what it can do, except for the following:
Top left you fill see a list of files. Lower centre you have a large window. On the vertical menu to the left of that, click IFO.
In the window at the top left, ignore ‘First Play’ (if there was anything to correct in that, myDVDedit will have done so and told you).
Click on VMG Menu en (English). Now the whole thing springs to life.
Set Coding Mode to MPEG-2 (if it isn’t already)
Set Standard to PAL (or NTSC if that is what you want)
Set Aspect to 16:9 (not any of the other options)
Now save the file.
Click on VTS Menu 1 en (English) and repeat as above.
Click on VTS Menu 2 and repeat as above.
You have now permanently ‘fixed’ the entire contents of the TS folder (the disk image) in 16:9 aspect. Close myDVDedit – you won’t need it again until the next project!

Aspect Ratio and Chapter Issues in iDVD

HI there,
I may be being particularly dense here and missing something but I'm being driven avsolutely mad by this.
Firstly, I have a Movie which is 16:9, correctly flagged in Quicktime as 16:9, and plays in 16:9 until I add it to a project (a 16:9 themed project) in iDVD whereupon it gets sqaushed to 4:3. This is ridiculous.
The only workaround I found was to imprt the whole movie into iMovie and 'Share' it then to iDVD which preserved the aspect ratio but took rather a long time to process,
The second issue I'm having is with inserting Chapter markers. I see that you can insert these regularly every 4 minutes or whatever, but what if you actually want to insert them at the start of a scene ? I wouldn't have thought it was beyond the ken of man to allow you to specify a particular timecode for each chapter marker ?
Hopefully I'm missing something that someone can put me right on, either that or iDVD is really missing a trick.
Thanks in advance for your help
Richard

You create the chapter markers in iMovie before going to iDVD.

IDVD not keeping 4:3 aspect ratio

I finished a project in FCP in 4:3, burned a QT that is 4:3, and brought it into iDVD. I tried using a theme that is widescreen (and keeping my 4:3 aspect ratio when prompted to choose 4:3 or 16:9), and I made sure that 4:3 was selected in the iDVD project information; but the preview and burned DVD were 16:9 and distorted. I then tried using an older iDVD theme that is 4:3, checking the project info again, and the preview, and DVD burned, were also 16:9.
what gives?

Thank you for clarifying, but I tried that first, after I originally read the instructions. They read that I'll "get a second file in the same folder with Anamorphic added to the file name", which did not happen, so I thought that perhaps I had done it wrong, and that perhaps I needed to "open" the application.
I am dragging a QT movie that I've exported from FCP. I assume that is correct; the Inverse-Anamorphic directions are a little vague in that area: "Export your video from FCP like you normally would for going to iDVD. Drag and drop it on the Anamorphicizer."
What do you mean by a "reference movie"?
Thanks.

Trouble with DVCProHD 16x9 aspect ratio in iDVD

I'll probably get flamed for this, but I've scoured the discussion boards and read thru the manuals and I just cannot figure out what the problem is or find the right answers. Okay...
I shot a short with the Panasonic HVX200 in 720p24PN. I cut the film in FCP 5.0.4 and would like to export it to make a DVD with iDVD 5.0.1. (Note: this is not the final version of the film I'm going to be making. I simply need to make a copy of my rough cut to give to my composer). I exported a Quicktime movie using the "current settings" and unchecked the "make movie self contained" box. I created a project in iDVD, dragged the QT movie in and burned it. When played on my computer and my DVD player displayed on my 32" HD widescreen TV, I get small bars on the right and left and the image is squeezed giving it a squashed from the sides picture. So my first question is, can iDVD 5 create a DVD from this source material and maintain the proper aspect ratio (16x9) or is the software too old? In other words, would I have to upgrade to iDVD 8? Or am I missing a step in the process that fixes this? Or is it a case of a plain QT movie not being the proper tool? Do I need to export it using QT Conversion or Compressor and make the aspect ratio custom? I have messed around with this and I don't seem to be getting the magic numbers here. I have a feeling I have the right applications, but I'm mixing and matching the wrong ones to achieve my goal. I know the people I'll be giving the rough cut to will view them on widescreen TV's so I'd love for it to play in full 16x9 for them.
Thanks in advance for your help!

I didn't really feel it was a specific iDVD question since so much of the work begins and involves what you do in FCP first. I posted the question in that forum as well, but I'm just wondering if this is a common situation or rare. Doesn't seem like it would be a rare situation, but that's why I'm asking. Is what I'm trying to do too advanced for a "consumer" grade program like iDVD. And that's not meant as a slam on the program. Anyway, enough about me. What about me?

Problem with Imovie and IDVD 16:9 aspect ratio

I've recently converted to a mac. The main reason for this was to take advantage of the superior video / dvd editing capabilities. However, I have hit upon a problem with the aspect ratio of the final video.
I have connected my video camera (a sony DCR-HC42E PAL which is in theory 16:9 aspect ratio) and imported the DV tape into iMovie. It recognised that this is a DV widescreen (i.e. 16:9)movie and imports the video and then "letterboxes" the video for some time. In the clips window it then shows each clip as it should in a widescreen mode.
I have created a final video then exported this to iDVD for burning to a disc. When it arrives in iDVD it is however elongated - i.e. 4:3 aspect ratio.
Is there any way of avoiding this / working around this problem?
I understand that my camera may not be videoing 16:9 but rather 4:3 then converting it itself - but in previous windows environment this was fine and the pre-loaded free windows movie maker software managed to cope with this - can a mac?
MacBook Pro Mac OS X (10.4.8)

Brilliant!
Thank you very much. I've spent the last 4 hours trying to solve this and also spent a good half hour on to apple care, not even their "teir 2" imovie experts in san fransisco could solve this problem - you are a star!!!!!
I was just about to throw the mac through the window and revert to windows - you have restored the faith!
I've done as you said (although the "auto pillerboxing tick is in "import" tab (not general) on my version 6.0.3 of imovie!) The movie has appeared in 16:9 format as suggested.
I would also comment that for general information, I pressed on with the higer frame setting and edited the full movie with the wrong setting on the macbook all the way through which looked weird - then burned a dvd via idvd and used the 16:9 setting as you suggested and the final video looked fine - therefore, the only place where the movie is incorrect was on the mac screen.
Overall I would agree that this is definatly a imovie "glitch". Thanks again.
MacBook Pro Mac OS X (10.4.8)

IDVD stretches slideshow because of higher aspect ratio

Hi,
i created an slide show with iDVD 6 and aspect ratio 16:9
if i burn the slide show and play it on my iMac, everything is OK, but when i play it on my tv, all images are stretched horizontally. this because the aspect ratio of the tv is 16:10 (i think)
is there a way to preserve the aspect ratio so my images wont stretch up?
thanks,
Dupol

sounds like an adjustment you may need to address on the TV or remote prior to playing the dvd.

IDVD aspect ratio

Similar Messages

Maybe you are looking for