Idvd audio troubles

When burning a slideshow from iDVD, which includes some movie clips from our Canon camera, the audio from the last movie clip starts in the middle of the slide show. I have other music loaded from my itunes library, but the audio from the movie clips overrides all other audio. This only happens after burning. It works and sounds great when reviewing in iDVD. Is there anything i can do to prevent this?

I burned the music to a CD, reimported using the AIFF format, and used the Disk Utility Manager to save the file to my desktop and then burned the DVD using the Disk Manager....still no luck. The movie clip audio still cuts in about half way through, overriding all other audio on the DVD. Sounds and looks fine while in iDVD. Any suggestions?

Similar Messages

Audio trouble

Hello friends!
I have a mystery here.
After last update (10/03/05 - kernel 26-2.6.13.2-1) my audio doesnt work more.
I try:
- run alsaconf
- run alsamixer, unmute all channels e set all volumes for 100%
- load manually sound module (snd-via82xx)
- add my user to audio group
- follow alsa guide in arch wiki
- search in this forum and follow all tips has i found
- run alsactl store and restore
- run alsa daemon
- change rc.conf
- run hwd e follow his instructions
- up the volume in the speakers (deeeeerrr )
When I play a sound with any application (shel or X) i dont have none alert or error message, but i dont have any sound! Nothing!!!!
Dmesg message:
CS4232 soundcard not found or device busy
CS4232 soundcard not found or device busy
No WaveFront cards found or devices busy
No WaveFront cards found or devices busy
lsmod message:
snd_ac97_codec 85116 1 snd_via82xx
snd_pcm_oss 51104 0
snd_mixer_oss 18432 1 snd_pcm_oss
snd_pcm 84868 4 snd_cs4231_lib,snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_timer 22660 3 snd_opl3_lib,snd_cs4231_lib,snd_pcm
snd_page_alloc 8840 3 snd_cs4231_lib,snd_via82xx,snd_pcm
snd_mpu401_uart 6656 2 snd_mpu401,snd_via82xx
snd_rawmidi 21408 1 snd_mpu401_uart
snd_seq_device 7436 2 snd_opl3_lib,snd_rawmidi
snd 49380 13 snd_mpu401,snd_opl3_lib,snd_hwdep,snd_cs4231_lib,snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 8032 1 snd
daemon log
modprobe: FATAL: Error inserting snd_cs4232 (/lib/modules/2.6.13-ARCH/kernel/sound/isa/cs423x/snd-cs4232.ko): No such device
modprobe: FATAL: Error inserting snd_cs4232 (/lib/modules/2.6.13-ARCH/kernel/sound/isa/cs423x/snd-cs4232.ko): No such device
modprobe: FATAL: Error inserting snd_wavefront (/lib/modules/2.6.13-ARCH/kernel/sound/isa/wavefront/snd-wavefront.ko): No such device
modprobe: FATAL: Error inserting snd_wavefront (/lib/modules/2.6.13-ARCH/kernel/sound/isa/wavefront/snd-wavefront.ko): No such device
Mb: Asus a7v8x
In windows (arght) the sound works fine.
Root dont have sound too.
Any ideias?
Thanks!!!
Rag

Hi @coributler20
Welcome to the HP support Forums!
I am happy to help you with your audio troubles. Firstly please post the full product number. See the following:
How Do I Find My Model Number or Product Number?
Without that, I can give you some more general help that may work. If the sound was working before, then what I would try is a system restore to go back to a known good configuration.
Using Microsoft System Restore (Windows 8)
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

IDVD audio won't work after installing Audacity

Can you help please?
I am using iDVD 4.0 and installed a 3rd party audio software, Audacity. That's when the trouble started. iDVD kept crashing when I was editing existing projects, and the audio did not work at all in iDVD. I uninstalled Audacity, re-installed iDVD, and am still getting no audio. The audio files appear within the project, but I just can't hear them.
Is there a preference or other file that needs to be removed to fix this? Any other suggestions would be greatly appreciated.
G5 Mac OS X (10.3.8)

Assuming you've first checked Software Update to see if there are any updated drivers and it's still not working, you could try resetting the printing system.
System Preferences>Print & Scan, Control+Click or Right Click on a printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again.

IDVD Audio from another Project

We have a G5 that is shared among multiple users, each one has their own account on the computer. We've been experiencing a problem where when one of our users creates and burns a iDVD project, then another user under their own account creates and burns a iDVD project, the audio from last/other project gets multiplexed with the current project.
I've tried repairing permissions in the disk utility, deleting the encoded assets within iDVD and to go as far as deleting the users home folders, trashing the preferences, but the problem keeps popping up.
Anyone experience the same problem and have any success in repairing the problem?
Thanks!
TM

Read iDVD: Wrong music after switching users at http://docs.info.apple.com/article.html?artnum=301642 for the solution to your problem.
F Shippey

IDVD audio issues

When I burn an iDVD video made in iMovie, this particular one has an audio delay of about a second. When previewing it, in both iDVD and iMoie it seems ok. I have burnt it 3 times creating a different project in iDVD and the same thing is happening. I am a relative Newbie using iDVD but my previous few projects have been fine....???

Welcome to the iDVD forum!
Try gong back to iMovie and "Extract Audio" and then try again in iDVD.
See this post for more info if that doesn't work:
http://discussions.apple.com/message.jspa?messageID=2536944#2536944
John B

I have audio trouble,right output not working

I have an Iphone 4s..
At first i thought that my headphone jack is not working good,because the left earphone is working and the right one isn't,when i jack it in...
I tryied many headphones just to make shore that it's not something else,but after many tries i realised that the jack is out..
and this evening i went to iStyle to try some Audio Docks,and when i put the phone on it it does play music,but only on the left speaker...
I thought maybe it's the dock,but then i tried three more and it was the same on all of them.. only the left one was working..And now i would like to know please what could be the trouble,and how can i solve it?
Thank you!
PS: the problem with the jack was there even before i updated to 7.0....

Well it sounds like a hardwrae issue to me but you could troubleshoot the software
Reset the phone first by holding the power button and the home button until it shuts down then turn it back on and try again.
If it persists then backup your phone to iTunes and set it up as new.
If it still happens then it is a hardware issue, and you will need service.
If it does NOT happen when you set up as new, then restore from your backup. if the issue comes back then there is something wrong with your backup and you need to set it up as new again and start from scratch.

IDVD audio problems

out of 25 dvds 3 work properly. My problems now are: the movie plays fine and then in sum spots my audio sounds garbled, I've tried different DVDs with same results, some work some don't. I have set the properties to encode "professional" with same resluts. I just need one good copy so i can take it somwhere else to burn a lot.

As I said, the setting in is iDVD preferences, not a project setting.
Go to the iDVD menu, and select Preferences.
Click on the 'Advanced' gear wheel icon.
There is a Preferred DVD burning speed setting drop down list, reduce the speed.

IPhoto Slideshow to iDVD - Audio problem

I created a slideshow in iPhoto and added music from iTunes. The slidewhow is about 40 minutes long and I set the length of the slideshow to match the music (about 10 songs). I shred the show from iPhoto to iDVD using the Share option. When I preview the slideshow in iDVD there is only 1 or 2 songs of audio depending on the time I shared it (I tried a few times). The slideshow keeps running, but with no audio. Any help is appreciated.
- Derek

You can get the songs you rip from your CD to export into iTunes by the following:
1. iTunes - Pref - Advanced - Import. Change import using to MP3.
Now all new songs you rip from CD will export with iPhoto
To correct those songs already in iTunes so they will export, do the following:
1. highlight song in iTunes Library
2. Toolbar go to Advanced - Click Convert Selection to MP3
3.Now you will have a duplicate of that song in your library. The one just added that you converted, add MP3 to title
4.Use MP3 song in your slide show.
5. Audio should export with photos.
Sue

IDVD Audio

Just finished a FCE (v 3.5.1) project on a Mac G-4 (OS 10.4.8) which included video and photo clips with audio sourced from the video clip or microphone. Exported to QT where both video and audio tracks were OK, then burned the DVD. On some DVD players there was no audio for the first video clip. Audio on the remainder of DVD (which included video clips from the same video camera) was fine.No problem with the video player using other DVD's. I have made many DVD's using the same software and hardware but this is a first. Anyone care to comment? Many thanks, JA

JA - Audio problems can be a symptom of errors during the burning process. High quality media can help (Verbatim is often recommended; I'm very happy with Sony; DVD-R discs should be the most compatible). Burning with a two step process also reduces errors (use Save as Disc Image from iDVD, then copy the resulting virtual DVD to an actual DVD using Roxio Toast or Apple's Disk Utility). Test the disc image to see if it works correctly. When you're finally doing the burn, it's often recommended to slow down the burn speed -- I use 1x or 2x.
John

Win CS5.5 RAMpreview audio troubles

Hi
Hopefully this isn't covered somewhere. I had a bit of a dig, but I couldn't figure any clear search terms and so on.
It's sort of a bug question, sort of a request for advice.
I''ve got this fairly large project I just moved over from AE7 (!) on a different machine.
I used RAMpreview to check the edit and audio sync periodically, as you do, and it was slow but fine. I tried the same thing in CS5.5 and it had what my mum would call a pink fit. Sometimes even crashing. Mostly it would grind away for minutes on end, indicating only 'Background Process Status: Loading Projects...", before it even started rendering the frames. Then the preview would seem very confused about which frames it had rendered (green and blue frame cache indicators jumping around and disappearing altogether), the playback would be choppy if at all and the whole program becomes slow-to-unresponsive.
By the way, Previewing is fine. It's only RAM preview with audio that this happens.
The first thing is, turning off multi frame rendering solves the problem and restores the RAMpreview functionality I know and love. So that's cool. But I'm still curious as to what's going wrong. I have checked the memory settings guides and reducing the number of cores to use down to two (Quad core Intel i5 system) and adjusting the RAM balance did have an effect. But the long cruching before rendering and the halting unresponsiveness was still present to some degree. No multiframe at all is still the most reliable by far.
Secondly, the size of the project is probably important. This is a big, messy project. 1080 with lots of media, lots of effects, many nested comps. I just did a much simpler project that had audio synching without any hassles using all four cores (which I'm probably better off not doing, but it worked is the thing). So it's just this project that the problem has appeared in so far.
Is there anything I can or should do about it, some box I haven't ticked somewhere perhaps?
If there's no particular fix, working with multi-frame switched off and then switching it back on for full rendering seems like the thing to do. Would you agree?
My system is an Intel i5 quad core, running Windows 7 premium with 8gb
thanks

Sorry about the delay.
Todd: Yes, disabling the audio (using those two core settings I mentioned) makes it actually start rendering a lot quicker (and the rendering is noticeably faster with multiframe switched on). There is a still a period where the program seems to halt while multiframe rendering, I assume, boots itself up. But I suppose that's normal. RAMpreview rendering with multiframe switched off begins almost instantly, but it wouldn't have to do any special reorganisation of data in that instance I guess.
When it did manage to render in multiframe with the sound on, the sound and the picture were often jittery and out of synch. It does seem to be the audio it's having trouble with, yes.
If it's a known problem then I guess it can't be helped much.
Mylenium: Hmm. I'm not sure I read you right, but for the sake of it I'll say there aren't any effects on this audio track. The project audio settings are the same as the file itself so it shouldn't be being resampled. A decent amount of my footage does still have embedded audio but it should be switched off and all the layers in the master timeline have their audio switched off, so hopefully it's being ignored even if any is on by mistake. That may not be how it works however.
My recent smaller project used pretty much the same working set up and didn't have the same problems. So I think if it was doing the same things at that point, the smaller project footprint meant it didn't hurt RAMpreviewing as much. Unfortunately I don't have an intermediate sized project to test with at the moment.

Idvd having trouble with QT movie

Hi everybody,
So I've exported my FCP 6 project using : Quicktime movie
Setting: Current Settings
Include: Audio & Video
Make movie self contained is checked
It plays fine in QT, there is plenty of space on my G5, but idvd for some reason is playing the movie all jerky. Any ideas?
Thanks for any help!
Sue

Suggestion: Try again but this time uncheck self-contained to see if this helps.
Quick question ... What is the source of your original video?
Open the file/s within QuickTime Player and do a WINDOW > SHOW MOVIE INSPECTOR
Tell us what video and audio formats are shown.
Message was edited by: SDMacuser

IDVD audio encoding error

I currently have 10 different quicktime files that i've created by exporting 10 different iMovie projects.
I've created an iDvd project and dragged all 10 .dv files in. Everything works well in the preview. the total project is 3.6 out of the 4GB available.
the entire project is on an 250 GB external harddrive attached to a mac laptop (so having available space is not the problem, i have over 130 gigs free)
i press burn, and the encoding begins. everything's running smoothly for two hours, all the videos are encoded. once it reaches "Audio encoding" i come across an error. it recommends me to "Delete Encoded Assets" and try again.
Which i have, and it's still not working.
Something about the Track.
i've created dvd's before with this exact same hardware. I even just created one now, using just one of the quicktime files. For some reason, this big project just won't happen and i'm on the edge of reason here.
I'd appreciate any help.
Mac OS X (10.4.1)

Is there any audio associated with the video?
iDVD 5: Audio encoding error when burning a DVD
http://docs.info.apple.com/article.html?artnum=301876
iDVD: Troubleshooting issues with burning discs
http://docs.info.apple.com/article.html?artnum=302925
Sue

Pavilion p6-2310 audio trouble

Basically, the troubles that I am encountering are that if I'm listening to music or watching a vieo etc. the audio will cut in half. Like I can hear backround music but not vocals. Or when playing games, it seems to cut out all audio. Its not a problem with headphones because I've tested different kinds that I know work and encounter the same problem.
I've read somewhere trying to research this saying that its probably something to do with drives and it said to delete and reinstall the drives but I have know idea how to do that on this computer.
Any help would be appreciated

Hello @vvvuuvvu,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having issues with the audio on your HP Pavilion p6-2310 Desktop PC and you would like some assistance. I am providing you with a link to the HP Pavilion p6-2310 Desktop PC Drivers page, which has all the drivers for your computer. I suggest you choose your operating system from the drop down box and click on Next. Scroll down until you see Driver- Original or Driver - Audio and click on the + sign next to it. You should then see the audio drivers for your computer. Click on the driver to get to the driver download page. Download and install the drivers on your computer.
I would be happy to assist you further if you need it, but first I would encourage you to post which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this I can provide you with accurate information.
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
If needed please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

IDVD AUDIO ENCODING .. APPLE NEEDS TO FIX IT!

It would be nice if they would reply to this. I cannot complete my projects.
After trying EVERY TIP on this 200 + posts on the subject ( except pulling my RAM out ).. I have found only one solution:
Using iMovie .. save back to your camcorder.. then
Open iDVD and use the "OneStep Movie" feature.
Time:
30 min iMovie = 30 min. back to camera + 30 off of camera to iDVD + 30 min for encoding. ( approx )

..also .. when encoding ( video encodes first ) .. as soon it gets to audio encoding .. the Activity Monitor shows iDVD as "Not responding" as well as a 10% or lower ( which seems to be 5% with dual processors ) processing CPU power when the "audio encoding starts" .. this is trhe same thing that HANGS FOR HOURS .. on the SAME video.. but a few short min. later ( if you use OneStep DVD ) the audio finishes ( you wouldnt know from the progress bar, but the Activity Monitor shows iDVD jump starting .. and the processor kicks back in gear) ..and burns the DVD..
What a pain in the *** ... but it works.

IDVD audio sync problems after Lion upgrade

Hi all,
I posted this in the Lion discussion, but thought I might have a go here as well. I'm having problems with iDVD and audio sync as follows...
I often download files from my Beyonwiz PVR, convert them to mpeg and DV files using MPEG Streamclip (with Quicktime MPEG playback component), then burn a disc with iDVD. Since upgrading to Lion, I notice that the audio in these files, and the burnt DVD in particular, can be slightly out-of-sync with the video. Although the effect is slight, I find it very unacceptable - its like trying to watch something that been badly dubbed. I find it to be a very jarring effect to watch voices and intonation out of sync with the picture.
I'm not sure where the problem lies - is it Quicktime, MPEG Streamclip, and/or iDVD ? I never had this problem at all with Snow Leopard.
Fox

I've discovered that the problem appears to be the conversion of the mpeg file to the DV file. The video/audio goes slightly out of sync using MPEG Streamclip under Mac OS Lion. I never had any problem with Snow Leopard. I'll have to try different conversion methods and see what happens...

Idvd audio troubles

Similar Messages

Maybe you are looking for