IDVD burned discs won't play on any dvd player

When I burn a dvd using Idvd they will not play on standard dvd players.
Is this a problem with anyone else?
I noticed it was a problem in the early 2000-2003 but apparently something got fixed, because I couldn't find an incident where this problem continued to occur.
I am new to the Mac world and I don't always understand the acronymns used when I read responses. However, here is my problem.
Burning dvd's using Idvd:
1. the burn seems to run and function normally
2. when I insert the burned dvd into a dvd player one of the following things occur:
a) loading takes a very long time, then I get a message saying "wrong disc"
b) loading occurs fast, reads the file as a dvd, the dvd begins playing the music and showing the main menu screen, after accessing a menu option the dvd begins to play the slideshow with the music then after a minute or two, it freezes, and is no longer readable when attempting to reload it, the message is "wrong disc"
3. I've tried using dvd-r, dvd+r, dvd+r dual layer, and changing the burn speed to 8x, then to 4x and then to 2x. Nothing seems to matter.
4. I have noticed that in Idvd the dvd type is for an older version of dvd's such as single layer 4.2 gb and double layer 7.7 gb. I'm wondering whether the Idvd software on my MacMini is up to date, even though when I check for updates under the apple it comes back saying my system is up to date.
I'm using a MacMini running Mac OSX v 10.6.8 with processor 2.26ghz, Intel core 2 duo, memory 2gb 1067 mhz ddr3, and my dvd drive is a pioneer dvd-rw dvrts08, firmware q81f.
I really need help to fix the problem with the IDVD software or to know that I need to purchase another DVD maker software for my Mac. The product below says my Mac is running OS X v 10.7.2 but it isn't it is running v 10.6.8 as I stated.
URGENT!!!!

My macmini is under 2 years old. I reviewed your list of affects and I am going down the list to determine possible cause and effect.
I did try the PRAM process. The DVD still won't play on my DVD player but it did play on my son's Sony blue ray. I burned it at 2x burn rate after the PRAM process completed.
I can assume that's progress. The audio did however skip a couple of times while playing. That is new.
I will continue down the list using different type of blank dvd's etc.
Question: As I was reading through some other issues I'm learning that Mac/Apple is discontinuing IDVD, is that correct?
Are you aware of some other software to purchase that will create dvd's on the mac? If so, I may as well go that route rather than wasting more time using a defunct product. What is your opinion?

Similar Messages

Movie created in iDVD 7.01 won't play in any DVD Players at all

I created a movie in iMovie HD 6 and mastered in iDVD 7.01 it plays OK on my computer but,
it wont play on any other DVD players at all, mine or my friend's, I just get the "Loading" message on my TV. Could this be related to the brand of DVD's I'm using or the encoding that older DVD players are not able to read?
If any one knows what the problem is, Please HELP!!
Thank you so much.
Josh

+Could this be related to the brand of DVD's I'm using or the encoding that older DVD players are not able to read?+
Yes and yes. If it plays in your Mac, it should play in a DVD player. Use DVD-R, not any other format. Verbatim works flawlessly for me.
I recommend a disk image burned to Verbatim DVD-R at 4X or slower using Toast or Disk Utility. You can set burn speed in iDVD '08 if not creating a disc image.
David Pogue also recommends Verbatim on page 356 of his iDVD 6 book:
iMovie HD & iDVD 6: The Missing Manual
Quoting David: "Cheaper brands don't use the same amount of organic dyes and are more likely to suffer premature deaths."
iMovie '08 & iDVD: The Missing Manual.
I buy Verbatim white inkjet printable in stacks of 50. Verbatim's part number: 94971. They have been flawless for me.

CD/DVD R discs won't play in Sony DVD player system.

I have just backed up my music and photos on CD R and DVD R discs on my new Macbook Pro. None will play on my Sony player. I previously purchased CD RW from Verbatim recorded on my Powerbook G4 and they play fine. I know there is technology change here, but what should I buy? For instance, can I still purchase discs that would play in my 4 year old dvd player or is that a waste of time? Do I need a new player?

I'd suspect the player since it is 4 years old and especially since it is a Sony who was slow to embrass that technology in the DVD players.
Before I bought my DVD player to play MP3 , I made a MP3 CDR took it to a store and played the disc in all the different models. Sony were the worst at the time. Heck within the same model one would play the disc and the other not.

Burned DVD-R won't play in domestic DVD player

Why a DVD-R i burn won't play in a common domestic DVD player, even the most recent and good quality ones ? Is there something else i should do before burning ?

How did you burn it? If you dragged the files to the dvd in finder and then hit burn it won't play in a dvd player, but if you used iDVD it should work.

How can I burn a slideshow to play on a dvd player?

I have tried to use simply Iphoto to export the slideshow to the desktop and then burn to a DVD but it won't play on any DVD player. I don't have Idvd and I find IMovie difficult to understand. Help?
Thanks!

YOu need DVD authoring sftware - purchase an iLife disk with iDVD or a package like Toast to author the DVD
LN

Making a disc with iDVD on my Mac won't play on any other player why?

Making a disc with iDVD on my Mac won't play on any other player why?

How about some details on how you made the disc. What sort of media did the project contain? What brand and type of media did you use? What burn speed did you use?
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

DVD SP burned disc won't play on DVD player

I recently compiled a FCP HD project into Standard Defintion 16:9 and imported it into DVD SP 4. I build, format and burned a DVD-R disc without any problems. However the disc won't play on any of the DVD players in my house (1 philips and 1 Pioneer). I checked all settings and can't find anything wrong! Remarkably, just before this I burned an older (SD 4:3) project on the same brand/type disc and that one worked flawless.
What am I missing, pleas help!
Evert

Double check to make sure you did not make an HD DVD (take a look to see what is on the disc, are the folders VIDEO_TS and AUDIO_TS or other name? It can happen where you think you made an SD but it is HD ) Also did you set a first play? Did you somehow make an NTSC (or PAL) and playing it on a machine that is not NTSC/PAL as applicable?
What brand media did you use? Some brands can be inconsistent...

The DVD I burned won't play on my DVD player

I filmed my son playing a concert on my iPhone. It is about an hour long. I was able to make it into a quick time movie. I figured out how to bun it on to a DVD throught Finder, but the DVD won't play on my DVD player or the Mac DVD player. What am I doing wrong?

Did you use iDVD to create the video DVD for playing?
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailer like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT

Copying/burning a dvd, won't play in a dvd player

Before my disk drive was replaced I could take a dvd, copy it and burn it to a disc (i.e., make a copy for myself), ad it would pla in my dvd player
Since then when I make a copy of something and burn it, it won;t play in ant DVD player. Will play onthe computer though
What settings do I need to change?

Musicwind is right, there's no way to do what you describe without third-party tools. A commercial DVD, like what you'd be using in a DVD player, cannot be copied using the Finder or Disk Utility, due to copy protection issues. Are you using something like Handbrake to rip the DVD, or is this not a commercial DVD that you're copying?

Burned dvd won't play on my dvd player.

Help! I downloaded FREE DVD creator from the APP store. Followed directions on how to burn DVD. Imported video from iMovie ( vacation video ), burned it onto DVD and the playback on my DVD player is very jittery, stutters, and sometimes freezes. The video format was m4v. and the other format was .mov. Am I doing something wrong? Did I miss something? Very frustrating spending all that time editing the video only to have it not play on my DVD player. Do I need to get iDVD or a 3rd party app? Please help.

Hi
Best place to ask is in iDVD forum - but still -
There are lot's of factors determine the resulting DVD quality
Stutter and jittery etc use to be due to
• material is in different frames per second (PAL vs NTSC)
I start with finding out in what format the DVD is supposed to be
PAL (25fps) = EU
NTSC (29.97fps) = US
Most DVD-players in EU can handle both - Few in US can do so
• .m4v or .mov etc are no Video-Codecs but containers - Open the movie file in QuickTime-Player and then open Inspector [cmd+I] to find out Video format and frame-rate
I use JES_Deinterlacer to get all my material into same standard then Import it into iDVD (set to same standard).
By letting iMovie or iDVD do this conversion usually results in STUTTERING and JITTERY results. JES_Deinterlacer does this so much better - AND IT'S FREE !
• Using Cheap DVD brands as Memorex, NoNames etc - usually don't work at all (for VIDEO-DVDs - Data-DVD usually works but they do not play in any DVD-player)
I only use Verbatim
• DVD type used matters - DVD+/-RW usually doesn't work or gives a disastrous result. DVD+R plays on more modern DVD-players - BUT DVD-R plays on older ones too.
I use DVD-R
• BURN SPEED - Full speed usually results in DVDs that doesn't play or only on a few devices.
I always set this down to x2 or x4
So You see there are multiple reasons why this can go wrong.
Yours Bengt W

I created a CD of one track from my library but it won't play on any CD player

I burned a CD of one track from my library and can see the track on the CD but it won't play on any CD player....help! My daughter needs this track to try out for her school talent show.

Did you burn the CD as an audio CD?
If not, that's your problem. Otherwise, without more details I can only guess. You might try a different brand of disk, or if you're using CD-RW try CD-R.
Regards.

.3g2 files won't play in any media player

Hello.
Ever since we updated to OS X Mavericks, any old .3g2 files won't play in any media player on our iMac. When we go to play them, they play button in QuickTime just flashes from pause to play and then back to pause and and nothing happens. I'm not sure if this file type is becoming outdated and therefore is not compatible with the new OS X, but I am just curious if anyone knows if there is a way to fix this.
Thanks.

Did you try VLC?

How do you save and burn a movie to play on a dvd player to show on your tv

I finished a movie, and saved it as a MP4 file. How do you save and burn a movie to play in a dvd player and show on your tv.

I found an iDVD program through Softonic. Do you know anything about reliability and if it is safe to download this one? If not do you have any suggestions for one I might download.

I downloaded a movie with Quicktime 7 Pro onto a DVD, but it won't play in my DVD player.

I downloaded a movie from the internet using Quicktime 7 Pro. I put it on a DVD so that I could watch it on my television. The disc isn't recognized and won't play on my DVD player. What can I do to get it to play?

In addition to what Gary listed - VisualHub (direct download). If you have issues with the direct download, you can obtain VisualHub directly from this site - http://www.wyodor.net/MoreEmbed/embedmedia.html

Burned disc won't play in CD Player

Help Please!
I burned a disc in iTunes.
The disc will play in the computer;
but it won't play in the CD player in
the car or the home stereo.
I suspect it is a file extension issue,
but I don't know how to check or change
anything.
Thanks in advance for your help!

Yes Audio CD should play just about anywhere so if it's not playing then it's not down to the setting you have chosen. It may just be your players, some can be fussy about what they will read, or it could even be the CD media itself. Have you been able to play CDs you've burned before or is this the first time you've had a problem? Have you another brand of blank CDs you can try?
Another thing you could try is reducing the burn speed and see if that helps, especially of you have it set at Maximum Possible. Open iTunes and go to Edit>Preferences>Burning and reduce the Preferred speed down. The packaging for your CD should have a maximum burn speed quoted somewhere, go lower than that. For instance if it's 24x try burning at 16x

IDVD burned discs won't play on any dvd player

Similar Messages

Maybe you are looking for