IDVD can't finish multiplexing and burning

Hi,
I recently upgraded for Maverics, from snow lepard. I am trying to burn my project in iDVD. It's dual layer dvd and project is two video files with 6 scenes selections of the lenth of 3hrs alltogether. I did similar burning few weeks ago on snow lepard with 2.5hrs long video no problemo..
This time I am spending 2nd day getting just negative responses from iDVD.
I am burning it PAL, 16:9, 7.7GB dual layer dvd and I tried profesional quality, didn't work, than both other options with same result. Tried to cut down to smallest file and retry still without success.
Is it just too big, or another problem with file..? or could that be Maverics not working the way it should?
In activity monitor I noticed that Pro transcoder tool is red not responding as well as enconder and thumbnail server and codec 32bit red out also..
Please any advices? I am thinking of downgrading back to snow lepard.., or do you have another advice??
Thanks very much for your reply guys!

Revert to your SL backup and do the burning. Simpler than trying to solve it with Mavericks, especially since Apple dropped iDVD from iLife.

Similar Messages

IDVD ejects disk during multiplexing and burning

Having burnt many DVDs previously, I have suddenly started struggling.
Having edited in FCE HD v3.5.1, I export to Quicktime and then build the dvd as normal in iDVD.
The project has no errors and then I burn it using Verbatim 16x certified 4.7GB/120 min Advanced AZO+ DVD-R disks.
During Multiplexing and burning (with between 1 and 3 mins left, it ejects the disk saying saying done but nothing is burnt.
To try to remedy this, I have set the burn speed to both 2x and 1x. I have also turned the computer off, removed all cables and battery, held down the power button for 10secs then rebuilt and retried. Still nothing.
I saved a disk image but I don't know how to then make that into a burnt dvd. Any advice on that would be appreciated but moreover, I'm sure I shouldn't have to jump through so many hoops to burn a dvd - Mac's should just work shouldn't they.....?!

Here's even more of an update, with no joy....
to refresh, I have a macbook pro 15" - the older one with the silver keys.
I make 3 min movies in FCE then export using quick time conversion and try to burn with iDVD.
The problem: I can burn data CDs but i can't burn a DVD anymore. This seemed to start after the update to 10.5.7. At that point I tried to fix it with no joy so due to deadlines, used another machine! Now a few months later, i come back to it and still no joy.
I have reset the PRAM
I have reset the CMR
I have upgraded to Snow Leopard
I have sprayed compressed air into the drive
I have reduced the burn speed to 1x
But still I can't burn a dvd. When iDVD goes through the stages, everything is OK until it gets to multiplexing and burning, it says it is 'writing lead in' and has 1 min left (or 2 mins when burning at 1x). Then the blue status line suddenly goes all along and the machine spits the dvd out saying done. (although iDVD does not revert to beginning of the process, it kind of freezes).
idvd version 7.04 if I hadn't said before.
Please help, I'm despairing....

IDVD ejects during multiplexing and burning

Hi folks,
I've used iDVD previously (several times) to create DVDs of movies I've created in FCE4. Today, the program goes so far, then ejects the disk during the "multiplexing and burning" / "writing lead-in" portion. When I check, there's nothing on the disk. Anyone every experience this? And, if you know, please advise as to how I might fix the problem.
Thanks very much for your expertise.
Vic

Multiplexing Error
Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

IDVD stuck at multiplexing and Burn ("about one minute left" for hours)

Hello,
Well my problem is pretty simple, I am trying to create a simple DVD in iDVD with a *.mov file and a *.m4v file.
Everything goes well and pretty quick untill the last step (multiplexing and burning). One one line of the sceen it says "done" one line below that it says "about one minute left" and it stays there, the burn never finishes.
It counts down very good for the last 5 minutes left, and than it stops at "about one minute left".
Does anyone have an idea what can solve this ?
Thnx.

May be You find help in my collection on Multiplex Error
*Multiplexing Error*
*PART One.*
Use of strange video/audio material eg .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio = .aiff (as on audio-CDs) (else coverted to this .aff 48KHz)
Using strange letters in video project name eg +,/; etc. keep to a-z and 0-9
strange letters in project name eg +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
*PART Two.*
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly eg x1
This gives good DVDs
*PART Three.*
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in:". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutly needed.
eg external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing widescreen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taio Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From: Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the uneditited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
Yours Bengt W

Idvd ejects the disk during the "multiplexing and burning" / "writing lead-in" portion. When I check, there's nothing on the disk

idvd ejects the disk during the "multiplexing and burning" / "writing lead-in" portion. When I check, there's nothing on the disk.

What brand and type of disk are you using? What speed are you burning at? Are you able to create a disk image of the project?
Try this basic troubleshooting fix:
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iDVD folder.
3 - launch IDVD and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.

Burning ejects during "multiplexing and burning"

When I burn a dvd it goes the whole way and then with 10 minutes left when it is doing the "multiplexing and burning" part, it ejects before finished and I get a blank DVD. Tried a 1000 times. Has anyone else experienced this?
I've burned dvds before and had no problem.

Hi
My list on this
*Multiplexing Error*
PART One.
Use of strange video/audio material eg .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio = .aiff (as on audio-CDs) (else coverted to this .aff 48KHz)
*Chapters !*
A. *Using strange letters* in video project name eg +,/; etc. keep to a-z and 0-9 strange letters in project name eg +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. *Location of Chapters*
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly eg x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutly needed.
eg external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing widescreen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taio Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the uneditited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
*One user more writes*
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous trys, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no mulitplex error
As a final experiment, I moved "bad" chapter mark about 5-10 secs beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplexer Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Yours Bengt W

When my project is in the multiplexing and burning stage, with 3 minutes left, it will eject the dvd. what do I need to do different of fix?

When my project is in the multiplexing and burning stage, with 3 minutes left, it will eject the dvd. what do I need to do different of fix?
I've tried it a couple different movies and it has done this each time with 3 minutes left. What do I do??

Hi
Where did the original movie come from
• miniDV tape Camera
• other Camera - in what codec if so
• from download - in what codec if so
and
How did You go from this
• via iMovie - how
• via FinalCut - how
• direct into iDVD ?
Did it play OK in iDVD Preview ?
Did You Save as a DiskImage ? Did this work OK ?
DVD - type used
DVD - Brand used
Did You set down burn speed ?
Free space on Start-Up (Mac OS) hard disk - How much ?
You see there are so much more info needed to be able to pin the culprit.
Yours Bengt W

I need a program that I can download home videos and burn to a dvd

I need a program that I can download home videos and burn to a dvd to watch on TV.

I don't know what you mean by "download home video" but there are several DVD burner apps in the MAS. Just search burn DVD and you'll see them.

Dvd keeps ejecting during multiplexing and burning in idvd

Ok, I realize a lot of other people have had this problem and somehow managed to resolve it. I have done a lot of reading and experimenting but so far NOTHING has worked. So, to recount everything that I have tried and all the details to this problem:
First of all, I would like to mention that I have successfully burned a number of DVDs in idvd in the past. Then suddenly it just stopped working.
I have run a verify/ repair disk permissions. I have deleted all the idvd files off my computer, the .plist and preferences file, restarted, and reinstalled iDVD TWICE with a custom install. I have 500 gb of free space on my boot drive. I used a cleaning disc on my SuperDrive, and my regular DVD player. I switched to a better brand of blank dvd. I am now using Sony DVD-r, 4.7 gb discs although memorex DVD+r always worked just fine before. The project I am burning fits on the disc. I am not using chapters. I tried turning on the tv safe area and made sure everything was inside it, but still the same problem. I tried booting up in safe-mode then restarting. Still, same issue. I am burning at 2x speed, using professional quality setting. The project preview works just fine. It goes through the whole idvd process just fine, until the burning and multiplexing. After burning about 10 minutes of the project, the disc ejects suddenly. Idvd says "done" but then at the bottom it says "about one minute left" and the little burning wheel symbol is still spinning. The disc plays fine in my DVD player till about ten minutes in, then freezes and eventually goes back to the main menu. I can see on the disc that it is only partially burned.
Oh, and I have also tried saving to a disc image and burning with toast and disc utility. Once, this actually did work with toast and resulted in a playable DVD. The weird part was that I still got the error sense key message in toast and thought I had made another coaster, but when I tested the DVD it worked fine in my regular dvd player only (it was not readable in my xbox or ps2). Since that one fluke, however, it hasn't been successful. Disk utility did not work for burning the disc image. I am absolutely at a loss here...somebody PLEASE help.

I believe I have finally fixed the problem but I am going to post what I went through just in case someone else ever runs into these same issues, maybe I can save them some time. I went through so much troubleshooting and each problem solved seemed to result in new problems, so, let me recap.
First, computer was working fine. Burned a DVD, it worked. Then a few days later, tried to burn another DVD. It didn't work. I tried different brands of discs, different types of discs, (-r and +r) sometimes there was a partial burn, sometimes no luck at all and an unusable, unplayable disc. The disc would eject early during the burning phase, giving me simultaneous contradictory messages that it was both "done" and had " about one minute left".
I tried running a verify/ repair disk permissions. Everything came out fine, but still no burned DVDs. I tried uninstalling and reinstalling idvd. I tried a cleaning disc. Still no go. Sometimes idvd would crash or freeze on me or give me error messages. Result varied depending on what i tried, but were never good.
Then I bought an external drive and tried saving my DVD project as a disc image and burning with toast as many people have suggested. This worked! So, I concluded that my SuperDrive was faulty but I'm not going to bother getting it replaced right now because the external works just fine. I thought my problem was finally solved, but then...
I noticed that upon restarting, my computer would display a white-gray screen as is normal, with the familiar apple symbol, but now a new addition: a very annoying loading bar that took 5-10 minutes to load. Unacceptable!!! Also, I noticed shortly after that iTunes did not work. It wouldn't even open, but crashed due to an error and asked if it could send a report. I tried deleting and uninstalling iTunes but that didn't work.
I ran another verify disc permissions with disc utility, and I got a very bad error message. It said there were errors on the drive and it could not be repaired and it said I needed to start up from the Mac OS X install disc and use disc utility to repair the volume. Problem with that...my install disc says it can't install on this computer. I soon learned from one (finally) helpful apple support guy that the reason for this was that I am running snow leopard 10.6.8 and the disc that came with my computer was for 10.5.2 or something.
On a side note: I had called apple support before and specifically asked if the reason the disc didn't work was because it was for a different version and the guy said he had no idea if that was the reason or not. Jerk. CLEARLY, that was the reason and my ignorant butt didn't know any better and he wanted me to pay 19.99 just to answer that question for me.
So, I went to the apple store and purchased snow leopard. It was delivered today, I started my computer from the new snow leopard disc and repaired my drive. Restarted. A bit slow restarting but no more loading bar and not as bad as before...iTunes still didn't work but I completely uninstalled a reinstalled it again and this time it seems to be working fine. Idvd is working, I saved another movie to disc might. And am assuming it will still burn fine with toast in the external drive.
During my arduous troubleshooting I discovered that I most probably have the seagate 1 tb hard drive that was recalled by apple due to its tendency to fail...whether this has been the root of my computer's troubles from the start, I still don't know for sure. But, everything seems to be functioning correctly now at least and since my computer has lasted this long without hard drive failures, maybe it will be ok. It's possible that I somehow caused the errors while I was fiddling around on the computer trying to fix idvd and iTunes. Hope this is helpful to somebody, someday. I did gain a lot of advice from various forums on the web and found many people having one or more of the issues I was running into, so I thought I should record my process here for others as well.

IDVD - what brand of disk and burn speed?

I have an ibook and bought a Sony DVD burner. I have OS 10.3.9, and the Sony DVD burner said it was MAC compatible for OS 10.4 or later. So I got Patchburn and the DVD works. However, I've got a really crappy burn when i watch it on a DVD player. I read somewhere on here that it could be the make of the blank DVD, that Verbatim's are best (why?), and that it might be my recording speed...instead of 20x perhaps 1x would be better (I believe that's what I read). My questions are this: what are good DVDs to purchase for recording, and how do I control the burning speed for the Sony or is it within iDVD?

Verbatim discs are highly recommended around here; I also like Sony discs. Higher quality discs have fewer manufacturing errors, and the better dyes are more durable/compatible. Here's a discussion:
www.digitalfaq.com/media/burnquality.htm
Slower burn speeds also mean fewer errors on the final disc. Most of the time it takes to "burn" a DVD is actually encoding the video files, so the extra time it takes to burn at 1x or 2x isn't that much different than 8x (that must be quite a burner at 20x DVDs).
To best control the burn speed, there are two options but both involve creating a disc image (in iDVD, Save a Disc Image). This virtual DVD can then be tested, and if it works well, you'll then copy the DVD onto your media. Burning the copy is accomplished with Roxio Toast or Apple's Disk Utility.
John

My idvd is not completing multiplexing and writting

my idvd is not working anymore, as when i burn it cannot complete multiplexing and writing

Regarding the multiplexing errors read this post by Bengt Wärleby: Multiplexing Error
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

IDVD or iDVDHD to make and burn new movies???

I am a new owner of a MacBook Pro and am trying to use my built in iSight to make a movie and burn it to a DVD for viewing on a DVD player'd tv. I can record the video on imovieHD however cannot burn a viewable copy. When I try to make a movie on imovie it wont let me use my iSight. Also, I cannot export my movie from imovHD to imovie - it says Quicktime couldn't parse it???
Can anyone offer advice? Thanks!

I am a new owner of a MacBook Pro and am trying to
use my built in iSight to make a movie and burn it to
a DVD for viewing on a DVD player'd tv. I can record
the video on imovieHD however cannot burn a viewable
copy. When I try to make a movie on imovie it wont
let me use my iSight.
We don't all have a MacBook Pro, although I am sure most would like one.
Have you posted this question on the MacBook Pro discussion?
Also, I cannot export my movie
from imovHD to imovie - it says Quicktime couldn't
parse it???
Can anyone offer advice? Thanks!
I am not sure what you mean. iMovieHD to iMovie??? Do you mean iMovieHD to iDVD? If you have made a movie with iMovieHD, you can open iDVD create a simple theme and drag your iMovieHD project to iDVD, check to make sure it will play, then burn your DVD in iDVD.
That should work.

I use Magic iDVD to burn complete movies and have started having a problem multiplexing and burning. I need to know what I can do about it so I can burn my movies.

I have been burning movies with iDVD for several years and once in a while it has trouble multiplexing. Usually I can fix it by doing a combination fix of turning off my laptop and unplugging for 20 minutes. Then when I'm ready to turn it back on, I plug it in, wait five seconds then turn it on. I then clean the disc drive with a dry brush cleaner disc. That has usually done the trick. Not any more. I'm stuck and don't know what else I can try. I have plenty of space on my hard drive, about 70 GB, which has always been sufficient for burning discs. If there is anyone out there whoi can help me, I'd sure appreciate it.

This post by Bengt Wärleby discusses many potential multiplexing issues: Multiplexing Error: Apple Support Communities
Also follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

IDVD Hanging On Disk Image AND Burning

I've been having this problem since upgrading to 10.4.7 (I have iDVD 6.02). I can't burn a DVD and I can't save a disk image. iDVD just hangs up and quits or it just hangs and becomes non-responding.
I restarted and repaired permissions over six times and even tried it running no other applications but iDVD and still have the same issue.
Help!

Hi Leigh:
Did you read the Apple article that Len Goff
suggested?
iDVD appears to be unresponsive when encoding Audio
http://docs.info.apple.com/article.html?artnum=302988
It may just take a lot of time to finish. have you
tried burning overnight?
Sue
I set it up Wednesday Night to burn and at 9 am it was still hanging. I force quit iDVD and restarted my Mini and set it up to burn again and when I got home from work it was hung at the Audio encoding again. I repaired permissions and attempted the process again over night and this time the DVD had been ejected but was still blank when I went to play it. I then read the this forum post and trashed the plist, repaired permissions and attempted again and still no luck! I am about to try it again and see what I get when I get home from work!

16mm movie transferred to dvd - now how can i add music and burn new dvd?

Hi, Sorry...I'm totally a newbie with the software and of course my boss wants me to make magic and fedex her old movies which were transferred to dvd by Helix, a professional photo joint. I don't need to change any thing on the movie itself but would like to add a music loop. I thought I could do this in IDVD but doesn't seem so. I was able to make a copy through disk utility but now stuck. Any helpers out there?!
Message was edited by: kimpio

Yes, I was aware of this but the phrase "Any items imported from audio CDs or acquired from other sources will not copy from your device to the iTunes library." is what worries me. Will this eliminate my Notes, Calendar Events, etc or will it apply mostly just to the music?

IDVD can't finish multiplexing and burning

Similar Messages

Maybe you are looking for