IDVD cannot burn DVD-RW.

I'm running iDVD3. tried to make a dvd on a DVD-RW but media is rejected and message asking for "DVD-R" appear. What can I do to make rewritable DVDs? I have superdrive Pioneer DVD-RW-109 installed.
Thanks in advance.
Juan.

The iDVD forums are here: http://discussions.apple.com/category.jspa?categoryID=128
This is the Final Cut Pro forum.
-DH

Similar Messages

Problem with iDVD - cannot burn DVD.

Problem with iDVD - cannot burn DVD.
Self has a MacBook Pro, which al new software.
My problem is, when my burn a slideshow, prop process ever before burning.
Box show: Multiflexing and burning: write Lead-in, then the process stops and ejects the disc.
I have burn a Movie test – no problems.
Self use Verbatim DVD-R
Who can help - what should I do?

How did you create the slideshow and get it in iDVD?
As a general comment try following this workflow to separate the encoding and burning processes:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Power Mac G5 Dual 2.5 GHz running 10.5.8 cannot burn DVD+R

Hello all-
I have a Power Mac G5 Dual 2.5 GHz running 10.5.8 and I cannot burn DVD+R. Does that make sense?
If I insert a DVD+R into the drive, it just spits it back out. I've tried several discs so it's not a faulty DVD.
Help.
Thank you.

I've tried several discs so it's not a faulty DVD
I trust that is several different brands, not several different discs from the same spindle/pack?
Media varies.
http://www.digitalfaq.com/media/dvdmedia.htm
If you haven't tried a different brand, try a Verbatim or Taiyo Yuden.
You might also try burning in a new user account to rule out account software troubles.

Cannot burn DVD compilation

cannot burn DVD compilation on 2 different sets of media using toast,get these errors,have a screen shot,but we cannot submit attachments??
"ILLEGAL REQUEST
BUFFER OVER RUN
sense code=0x21,0x02
"

Please take the time to be very specific as to exactly what you are trying to do.
Give us a step by step of the content and exactly what you are doing and what you have tried.
Check the correct choice. DATA AUDIO VIDEO
Have you created a folder .
If you have your settings wrong for the files you are trying to burn, in other words if you are trying to burn AUDIO and your set to DATA. and visa versa.
Tell us more.
Cheers Don

Internal super drive cannot burn DVD from iDVD

I using MacBook pro 15" from 2010, when I using iDVD brun my DVD when the process go to multiplexing the disc kick out from super drive cannot complete the burning, but I used another mac to burn is work, I think is my Macbook pro super drive got a problem, so how can I fix the super drive problem, I try to download the super drive framware 3.0 but got the message said the update not for my macbook pro, I buy the new extenal super drive, go the message the super drive not support for my mac, I really need help. please please.

See Bengt Wärleby's post in this topic: Multiplexing Error
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

I cannot burn DVDs in either iDVD or iMovie.

The DVD ejects before the process ends, and is blank.
I have an iMac running Lion. Significantly, nothing at akll comes up about disc burning in the 'About My Mac' utility.

Hi again Frank - I am happy to report that I solved the problem and managed to burn DVDs that I can view in my DVD player.
The solution required a certain amount of lateral thought, as follows
(dramatic pause)
- if at first you can't burn DVDs on your own iMac, use your wife's iMac instead.
Mrs Cromercrox1 has an iMac that's a more recent model than mine, so I decided to give it a go (I asked her first, of course.) So I exported the m4v file from my own iMac onto a memory stick, loaded it onto my wife's iMac, formatted it in iMovie, prettified it in iDVD and burned the discs.
The video quality was rather poor but the audio was better - but I am not really complaining as I was just so pleased to have been able to have burned the darned things at all. So all's well that end's well

Cannot burn dvd without theme

I cannot do what would seem to be the simplest step in imovie and idvd. I have created my customize movie in imovie (no canned themes or audio) and when I go to the shre menu and choose idvd so I can burn my movie, I cannot burn a dvd without first choosing a theme. I don't need a theme...I wnat my movie just the way it is. Please help. This is so frustrating.
barb

've been a Mac user for 18 years and I'm disappointed and surprised with Apple.
Why...? You accomplished what you wanted to do. It just took you some time to find that.
iDVD 6 Getting Started
Apple's iMovie Learning Site
Apple's iDVD Learning Site
General Learning Center
Ken Stone: Authoring in iDVD 6
My favorite, by far:
iMovie HD & iDVD 6: The Missing Manual
You can download Chapter four: Camcorder Meets Mac.
iPhoto 6: The Missing Manual

New mac mini - cannot burn dvd

I have recently purchased a mac mini. I already had an external dvd burner, but I can't burn dvd projects from iMovie since no idvd is on the mac. HELP!

Tbirdvet, thanks for the suggestion. That is what I planned to do today unless someone can suggest another idea. I can always use a usb extended Mac keyboard anyway. And a mouse is certainly cheap enough.

IDVD Finishes Burning DVD, but DVD is not recognizable?

Hello,
I'm working on a big school project and tried to use iDVD to burn a 5 minute project I made in iMovie to a DVD. I do not have a SuperDrive so I used the Plextor PX-740UF external DVD burner. Everything appeared to be working fine with the DVD-burn process, however at the end it said "Errors found during disc burn" or something to that effect, and then it said "Error during multiplex burning" or something to that effect. I tried this DVD in both of my DVD players on different TV's - it didn't work. When I put it in my Mac mini Combo Drive it wouldn't work, didn't appear on the Desktop, and I had to restart my computer to get it to eject. I tried again and no error message occurred, the DVD was ejected from the Plextor device... but iDVD froze with the message "DVD burned successfully". This disc would not work in a DVD player either. Note that these were both burned with a FireWire connection.
Do you know what I did wrong or where the fault lies?
Thank you,
Mitch

Hi Mitchell
No I don't but I know how I would go on.
a. You are using iDVD 5 then make a disk image (File menu and down)
b. When You got this test it with Apple DVD-player. OK ?
c. Then there has to been a program to Your ext DVD-burner. Can it be set
to make a DVD disk. If so then use it and the disk image You just did do.
(If not there are buy-programs. I use Roxio Toast™ and like it very much)
on the new DVD there should only be two folders:
- audio_TS (and this is empty and has to be there anyhow)
- video_TS
Yours Bengt W

Suddenly I cannot burn DVD on my Pioneer DVD-RW DVR-112D

Hi, bought 100 DVD's of a brand I always used and suddenly I cannot burn these DVD's. Tried it with the Mac utility, Disk utility and Roxio Toast Titanium 10. No success. These DVD's do burn on myMacBook Pro running under the same MacOSX 10.6.8.
Re-installed the OS, ran Applejack to repair any errors, but no success. Phoned Mac in Holland, no idea. What could be the cause and how do I repair it. I have 2 SuperDrives and both exhibit the same behaviour. Pioneer has several Firmupdates but only for PC, not for Mac.
Regards,
arnold

Later (higher speed) DVD-Rs can require the latest firmware update in older drives to burn successfully. I believe the DVR-112D is up to v.1.28: look here:
http://www.pioneer.eu/uk/support/software/tax/950/index.html
Even if there's only a "PC" updater, you still need to do the update. Easiest way - temporarily install the drive in an external USB case, and connect it to a PC, and run the update from there. A pain, but necessary.

Cannot burn DVD (Domain users)

Am experiencing a problem in my employer's network with regards to burning DVDs from Final Cut Pro X.
When we click Share > DVD and hit go, the program starts "Processing", and once this bar fills up, it disappears without burning. The disc drive does not even spin up. I can tell why this is, becuase the Sharing Center window does not open.
This only affects our domain users - logging on as a domain admin or a local admin on the same mac works fine and sharing centre will open. When logged on as a domain USER, the button to open sharing center isnt even present, its just entirely missing.
We have to use domain user accounts, and right now they cannot burn from FCPX!! Does anyone know a solution for this one? I can only think its some kind of permission issue, but I can't think where to look to try anything.

Why not simply "burning to HD" and then use an external tool (i.e. Toast) to burn the actual DVD? I always write to HD first for a final quality check.

IDVD 08 burn DVD project ERROR!?

Trying to burn my project that i've made in iMovie HD, export it to .mov file, then opened 3 .mov files in iDVD project, added some pictures and music, played with chapter and tried to BURN DVD.
Everything is OK when I click preview, everything is OK with ENCODING in Background=done, NTFS, 4,2,GB but only 3GB project, 16:9...all fine. Then I click *BURN DVD*:
_There were warnings during the project validation. It is recommended that you fix these problems before burning the project._
I click *CONTINUE BURNING*, proces menus, proces slideshows, proces movies - everything OK, *burn DVD* - *the program just shut down*.
*What should I do?*
I've tried burn VIDEO_TS folder - same thing.
Now trying save as disk image...hope this works.

http://docs.info.apple.com/article.html?artnum=302925
1. Make sure your software is up to date - EVERYTHING IS NEW WITH COMPUTER AND UPDATED REGULARY.
2. Make sure you have enough free space on your drive to create a DVD - I HAVE 10,74GB FREE
3. Temporarily disable any non-Apple QuickTime plugins by removing them from /Library/QuickTime/ and ~/Library/QuickTime/ and try burning again. - http://img292.imageshack.us/my.php?image=58969981ax7.jpg TOOK A SCREEN SHOT
4. If you are using a third-party theme in iDVD, try selecting a theme which was included with iDVD instead - USING iDVD THEME 6.0 TRAVEL THEME
5. If the burn failure resulted in a partially burned but unreadable disc, try burning a large amount of data from the Finder or another application to a DVD to see if the issue is isolated to iDVD. For example, try burning a copy of /Library/Fonts/ to a DVD from the Finder. - I’VE BURNED MyGreatDVD.dvdproj AND EVERYTHING WAS FINE USING TOAST SO BURNING DISK IS NOT THE ISSUE
6. If the issue is not isolated to iDVD, run Apple Hardware Test - I WILL TRY EVERYTHING ELSE BEFORE DOING THAT
7. If the issue is isolated to iDVD, make note of what was being displayed in the burn progress dialog when the burn progress stopped. - ERROR WHEN BEEDED TO BE BURN
8. THERE IS NO 8.
9. If the burn fails during Multiplexing or Encoding, try deleting any existing encoded assets from your project. - I DON’T UNDERSTAND??
10. try burning a different project to see if it has the same issue - I WILL BUT THIS IS NONSENCE FINDING NEEDLE IN THE HAY
11. you may want to try burning the DVD to a disc image - I DID AND WAS THE SAME ERROR
Please help...I am so close but also so far away.

Satellite L300D cannot burn DVDs

I have Satellite L300D and Ii have had about a year but I never tried burning DVDs. Now I can burn and read CDs perfectly and read DVDs but when it comes to burning DVDs it have problems as Toshibas programme that came with laptop does not work to burn DVDs and other various programs like Nero and imgburn do not work. I am always getting write error and other things. I was told it was the disks so I went and spent money for verbatim DVDs instead of cheap ones and still it is making coasters out of every disk I try to burn my DVD burner is
HL-DT-ST DVDRAM GSA-T50N ata device
Can anyone help me please have tried everything restoring my factory settings to when I first bought the laptop as new and still no joy desperately need help.
Any answers lol ?

Lot of people have problem installing WXP on new notebook because of missing SATA driver. Without this driver HDD will not be recognized properly and WXP installation cannot start because of missing HDD.
To avoid this SATA settings in BIOS can be changed from AHCI to compatibility. This is OK but HDD will not run on default speed and with full performance. So it is better to install WXP with SATA driver and AHCI settings.
Now when the WXP is installed you cannot change this BIOS settings. it will probably end with blue screen at start up. So if you want to have well working WXP on your notebook you must install WXP again (AHCI mode in BIOS).
In this forum you can find hundreds of threads with good explanation how to do this.
If this will help with DVD I don't know but I don't see any reason why you should not be able to use optical disc drive for burning DVDs.
I have Satellite A300 with WXP Sp3 and NERO. It burns all empty medias.

Satellite Pro L875: Cannot burn DVD in Recovery Media Creator and Win 8

I have a Satellite Pro L875 with Blu-ray Burner.
I tried to create DVD Recovery disc, the burning process stopped and had error prompt asked me to check if the disc was damaged or scratched. After the burning process, the DVD was not blank and had some data written on it.
I tried to burn data disc in windows 8. the burner did not start. I only able to add files to the drive.
I play Blu-ray movies and dvd movies, the blu ray drive was fine.
I found information about the appropriate dvd disc speed that matched the burner speed.
How do I know what speed the burner support?
How to burn DVD or Blu-Ray in windows 8? ( I have looked at Microsoft forum but the solution did not work.)
It would be great if anyone answer and make the drive burn some discs.

At first it will be interesting to see why you cannot create recovery discs.
Have you used empty DVD-R media? If not please use it and buy some high quality product like Verbatim or TDK.
Is there option to create recovery USB stick?
Burning under Win8? Have you tried to use some burning applications like NERO?

Premier Elements 12 Cannot burn DVD Get error message of internal software failure

Cannot butn DVD with Premier Elements 12 Get error message of internal software failure.

Great news JMD103.
There should be a big red pop-up, when one adds a Stop Marker to the end of the Timeline, saying "Do NOT do that!" That Stop Marker will almost always yield a failed Project output to DVD.
Good luck, and happy editing,
Hunt

IDVD cannot burn DVD-RW.

Similar Messages

Maybe you are looking for