IDVD cannot write medium !!!!

error message:
the recording device reported the illegal request
cannot write medium + incompatible format. (0x30,0x05)
I have ibook G4 bought in 2004 November. OS is OS10.3.9
I burned DVD by iDVD (iLife '04 I guess) then I get this error:
I used DVD -R 8x for medium
What is wrong ??

Welcome to discussions.
Could it be a defective disc? Try another. Most people seem to use DVD-R 4X but 8X should work if it is good quality.

Similar Messages

Formatting Failed: Cannot Write Medium...

Hi There,
I've been trying to burn a particular DVD now for some time. I've had nothing but problems with Compressor and DVDSP creating video artifacting (and yes, my audio is an AC3 file). This was never a problem in the older version though.
Anyways, I bought Sorenson Squeeze because it will encode MPEG 2 files as well as I need it for Flash. After I created a .MPV file from Squeeze I brought it into DVDSP and everything seems fine - until I went to format the disc I got the following error:
Formatting Failed
The recording device reported the not ready error:
Cannot write medium - incompatible format (0x30, 0x05.)
I tried burning the disc in Toast and got a formatting failed error there too. I'm trying to burn picture only right now so there are no audio files to screw any of this up.
Does anyone have any suggestions?
Thanks,
K

Hi Kristin:
Before trying to burn directly from DVDSP, did you build the project in your hard drive? I mean go to Format and select Destination > Output Device > Hard Drive. That will create an .img file (a DVD image file) that first: you can mount double clickig it and test it with DVD player, and second, you can take it and just drop into Toast icon (or drop the .img file into the Copy section of Toast)and burn the final video DVD.
In that way you use DVDSP for creating the complete final DVD structure and Toast to burn it. It could help in case that DVDSP doesn't "like" your media.

Cannot write medium - incompatible format

Keep getting this message "the recording device reported the not ready error. Cannot write medium - incompatible format (0x30, 0x05)
Any suggestions?

If you more details on the project, the burner you are using, how you are writing the project, the DVD-R (is that what it is?), the set up of your computer (says PowerMac 7.3? and which OS of 10.4) it can help narrow it down
Also some threads
http://discussions.apple.com/thread.jspa?messageID=1090247&#1090247
http://discussions.apple.com/thread.jspa?messageID=1192904&#1192904
http://discussions.apple.com/thread.jspa?messageID=1087561&#1087561

Cannot write medium

I used sony dvd-r. when i attempted to burn a project that was previously burned this is the message i get: Formatting failed- the recording device reported the not ready error: cannot write medium- incompatible format.(0x30),(0x5). I used i'd compressor to encode the video. i trahed the prefs. i am using fcp hd
thanks in advanced
scott

Are you sure this was a writable DVD you were using
and not a CD??
After an awesome weekend of troubleshooting, trips to the genius bar, and alot of reinstalling. problem solved the super drive could use only 8x or lower dvds
thanks for your replies, i really appreciate them
scott

Burning error, cannot write medium

error says cannot write medium incompatable format, any ideas?
G5 Mac OS X (10.3)

Hi HGW2:
Look at these articles.
http://docs.info.apple.com/article.html?artnum=25750
http://docs.info.apple.com/article.html?artnum=151900
http://docs.info.apple.com/article.html?artnum=%2025480
Also, this is regarding high-speed media:
http://docs.info.apple.com/article.html?artnum=86130
Sue

Cannot write medium-incompatiable format

I have recieved this error message both times trying to burn a music cd with toast 7.1. The error happens at the same time both times. Right near the end of the cd. The cd will still play when its ejected and tried in a stereo. Near the end however you get digital distortion noise. Im using sony cd-r discs which I believe are good quality and have the speed set to best in my toast pref box. Applecare lady I got today had no solution and told me to burn with itunes. I would rather a software application specific for burning myself. I hope its not a matter of what kind of disc etc. etc. even my crappy pc burns fine everytime on any disc. Any help would be much appreciated my friends!
thanks

You haven't said if your drive will burn successfully using iTunes or a different application. Until you try this we won't know if the problem is with your drive or just your software.
First you should check the source material to make the mp3/aiff/wave file is not corrupted and plays correctly. If it is ripped from a cd make sure the cd still plays all the way through. If it turns out to be software related you should check if there is an upgrade for your version of Toast. If you cannot burn anything satisfactorily then get in touch with Applecare again and tell them your drive fails to burn anything.
One point to be aware of is that even though you consider your blanks to be good quality they might just be a bad batch. I've returned whole spindles of blanks after five or six have failed in a row, replaced them with the same brand (and from the same store) and had no problems with the new batch.
Hopefully this is all your problem is.
MacBook Pro 15" Mac OS X (10.4.9) 1.83 GHz Intel Core Duo

Problem with iDVD - cannot burn DVD.

Problem with iDVD - cannot burn DVD.
Self has a MacBook Pro, which al new software.
My problem is, when my burn a slideshow, prop process ever before burning.
Box show: Multiflexing and burning: write Lead-in, then the process stops and ejects the disc.
I have burn a Movie test – no problems.
Self use Verbatim DVD-R
Who can help - what should I do?

How did you create the slideshow and get it in iDVD?
As a general comment try following this workflow to separate the encoding and burning processes:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Mid 2007 iMac SSD in optical bay - cannot write to last block of device

Hi All,
I've just replaced my optical drive in my 20" mid 2007 iMac (Dual core, 2.4 Ghz, 2 Gb RAM running Mavericks) with a solid state drive (Crucial MX100). The plan is to transfer my boot disk to this drive while keeping my 1 Tb HDD for media and such.
I followed the ifixit guide and it all went smoothly, however when I try to partition or erase the new SSD using Disk Utility, it tells me "Operation failed - cannot write to last block of the device". After googling, I found some answers here that suggested the optical bay cable may be faulty, so I bought a replacement and swapped it in, but no such luck, same problem. I also saw some threads suggesting that the boot disk should be in the original hard drive spot, but since this isn't the boot disk (yet) this shouldn't be the issue.
My computer recognizes the new SSD but won't allow me to partition it. Any suggestions on how to proceed?
Thanks!

ds store wrote:
3. The new disk is just bad.
OK. If that's the case, I'll just get another disk.
Lots of problems with that hybrid drives on Mac's on these forums, get another one that's 7,200 RPM and from Western Digital, not Seagate.
With a 7,200 RPM you get more performance across the entire drive, not just what's cached in the small flash portion of the hybrid.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/
1. Hybrid drives: I'm on number 8 in 6 different machines, no problems at all, what happens when you try?
2. The OP is not using a Hybrid.
3. Lot's of problems with WD drives not booting on these forums though.

"write medium error" when trying to burn a music cd

i've tried a few different times to burn a cd on my itunes and the same thing happens every time: i insert a black disk and my computer begins to make a noise that sounds not unlike grinding. the progress bar at the top of the itunes box says it is checking the songs, then initializing the burn, which it does for a couple minutes. then it says it is finalizing the burn, and spits the cd back out at me. a message then pops up on the screen which tells me that the cd was unable to burn because of a "write medium error." any help in this area will be greatly appreciated.
p.s. i also tried downloading and installing the new itunes, as well as restarting my computer, all with the same effect.
p.p.s. i'm using a macbook pro.

seenabeena,
Same exact thing was happening to me and was very frustrating. I was able to burn anything on from my itunes and then for whatever reason I started experiencing the same issues you are having. Don't know why it made a difference but someone here suggested using different brand of CD's. Guess the cheaper CD's are harder to read when it comes to the laser calibration. This isn't a endorsement at all but seems I've been able to burn anything again on the "imation" brand CD blanks. I hope this helps. Also, make sure you don't burn at anything higher than 8X when you start.
Carl

Cannot write to transaction log "C:\Program Files (x86)\SAP BusinessObjects\sqlanywhere\database\BI4_Audit.log

Hi friends,
My server Intelligence Agent (SIA) can not start because the database service "SQLAnywhereForBI" can't start also. I got the following error :
"I . 08/09 20:35:06. A read failed with error code: (1392), Le fichier ou le répertoire est endommagé et illisible.
E. 08/09 20:35:06. Fatal error: cannot write to transaction log "C:\Program Files (x86)\SAP BusinessObjects\sqlanywhere\database\BI4_Audit.log"
E. 08/09 20:35:06. unable to start database "C:\Program Files (x86)\SAP BusinessObjects\sqlanywhere\database\BI4_CMS.db"
E. 08/09 20:35:06. Error writing to transaction log file
I. 08/09 20:35:06. Database server shutdown due to startup error "
inside the database log file.
Please, can you help me

I found the solution by following the advice given on the following forum:
http://evtechnologies.com/transaction-logs-on-sybase-sql-anywhere-and-sap-businessobjects-bi-4-1
In fact, I crushed the BI4_Audit.db and BI4_Audit.log files and I replaced with others that I got from another machine where I installed BO again and where the files are not corrupted . After I logged in to the CMS database by executing the command in the command line:
dbisql -c "UID = DBA; PWD = mypassword; BI4 Server =; DBF = C: \ Program Files (x86) \ SAP BusinessObjects \ sqlanywhere \ database \ BI4_CMS.db."
Once connected, I start the command:
alter database 'C: \ Program Files (x86) \ SAP BusinessObjects \ sqlanywhere \ database \ BI4_Audit.db' alter log off;
The query runs successfully.
And that's good, I can be connected to BO smoothly.
Thank you again Eric

My first gen ipod mini does no longer sync with itunes 11.0. It says "cannot write or read". Ist this the end?

My first gen ipod mini (that I use in my car) does no longer sync with itunes 11.0. It basically says "cannot write or read". Is this the "end of life" of that ipod?

You mean you can't get to the Summary pane?
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar

Cannot Write or Read to disk Error during iPhone 3g 3.1 sync

Searched the forum with no luck. Just upgraded to 3.1 on my 3G and I cannot sync without it stopping with the error - Cannot write or read disk. It seems like its almost random on what file it picks to stop on - the file plays fine in iTunes 9. Any suggestions?

Hi,
Restore the Touch. There is no easy way to remove files from an iPod as it classes media on the iPod as "read-only" - There are software products that can be used to remove media from an iPod, but it is not an official method and you risk causing more damage.
If you really need the files on the Touch then use Google to find a program to remove files, there are a few, but do so at your own risk!
Kind regards,
Peter.

Trying to install itunes on my new windows 8 laptop and getting an error message cannot write to file?

error message cannot write to file when trying to install itunes on windows 8 laptop.

Hi Stacy,
Welcome to Apple Support Communities.
Take a look at the article below, it provides a lot of great tips that will resolve most iTunes installation issues.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
If you run into any issues, just reply with details about the step you're on and what you're seeing.
-Jason

Cannot Write to USB Drive after it wakes up

I have a couple of external USB drives. Once one of them goes to sleep, I cannot write to it or eject it when it spins back up. When I try to copy and file to it the files seems to copy ok and when it's just about finished it errors out. This happens with the finder and with Pathfinder as well. If the drive sits and OS X spins it down I can't write to it or eject it when it spins back up. I just get the usual drive is busy, can't eject and any write attempt fails. I have to force disconnect it and reconnect it for it to function normally again. Tried a permission repair and that found no problems.
Any ideas?

Ok. More details. Apologies for the lack of them to start with.
The Case is a Vantech USB/SATA HD Dock. It has it's own power (i.e. it is not powered by the bus). The Drive in it is a Western Digital 1TB Caviar Green. It has done this on all USB ports and with any computer it has been connected to. Mac computers any way, I have connected it to a windows box at work, but not long enough for the problem to manifest it self. Unfortunately I don't have a Mac I can hook it up to directly via SATA to see if it is the enclosure. I found another SATA enclosure here at work to try it with tonight. It's not the computer going to sleep that is causing the problem. It the OS spinning down the drive.
I get this in the console log when I try and unmount the drive via the finder:
20/07/09 11:17:00 AM /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[3426] StatusMonitor::volumesChangedCallBack returned -47

Cannot Write to USB Stick

I can copy from USB sticks but cannot write to USB stick.
I have tried various USB sticks to ensure I wasn't using an old stick or a damaged stick but nothing works.
I have tried formatting the sticks differently, i.e. FAT32, Mac OS Extended etc but still doesn't work.
The files I am trying to copy are only 200KB onto an empty, newly formatted 16GB stick.
I have checked and permissions for the stick is Read/Write.
Any help appreciated.
Thanks.

Does nobody read OP anymore? USB had the Arch installer on it, which involves some non-standard partitioning.
@radoslav192
Manually re-partition your thumb drive with fdisk, etc., then format the partition.
Edit: had to remove the log from my eye.
Last edited by alphaniner (2014-03-04 19:33:12)

IDVD cannot write medium !!!!

Similar Messages

Maybe you are looking for