IDVD continues to quit, posts error message

Whenever I try to open iDVD, wether it be in the doc or through finder, it automatically quits and comes up with an error message asking if it should send the report to apple. I have tried relaunching it several times and have restarted my computer as well, but nothing seems to work. I would like to avoid re-installing the disk with iLife on it (that came with my computer) but do I have any other options?

Take a look at my several recommendations in this thread: http://discussions.apple.com/message.jspa?messageID=5929010#5929010

Similar Messages

  • "Adobe Illustrator cs5 quit unexpectedly" error message. After I upgratded my imac to Mavericks I can't open Illustrater CS5. Help pls.

    "Adobe Illustrator cs5 quit unexpectedly" error message.
    After I upgrated my imac from Snow Leopard to Mavericks I can't open Illustrator CS5. (No problem with PS)
    Every opening attemp crashes. May this be possible because of third party plug-ins. (eg. Esko Artwork)
    Help pls.
    Thank you.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
    DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    ☞ If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    ☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • My power light continually blinks bu no error messages on PC

    My Deskjet 3745, after several years of satisfactory operation has suddenly stopped printing.  The power light constantly flashes, no error messages on my PC.  No paper blockages, ink cartridges OK. What could it be?  Will not print test sheets or any other diagnostic tools? Help!

    Hi @jonathonleslie,
    Welcome to the HP Forums! 
    I noticed that your HP Deskjet 3745 power light is continually blinking but no error messages are showing on the PC. I am happy to help you with this error!
    Please see this guide, Blinking Power Light, I would also visit this guide, just in case. The HP Product Stops Printing and the Power Light Blinks or 'Mechanism Error' Displays on the Comput....
    Hope these guides will help, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • K9AGM2 Mobo PS2 Mouse POST Error Message

    Bios AMI v02.61
    Recently the USB mouse connected to the system died and I had to  temporarily attach a PS2 mouse to install a replacement and all this works fine. However when I turn on the PC now I get a POST error message "PS2 mouse not found press F1 to continue". How can I I get rid of this tiny annoyance? I have searched the bios options and reset the CMOS to no avail.
    TIA,
    Colin

    Quote from: corkyboy on 26-November-07, 16:31:31
    I read the Moan Guide but could not find any references that were helpful. As to the origin of the board, it was purchased from a retailer here in Australia and the manual describes it as a K9AGM2(MS-7327 SERIES) and has the AMD 690G/690V chipset. Have to say in all respects it is a great little mobo.
    Colin
    "I read the Moan Guide but could not find any references that were helpful."
    We need Full details about your system, Moan Guide shows what we need. Example in my signature.
    Please provide full details about your system. ID board with Everest:
    http://www.lavalys.com:8081/beta/everestultimate_build_1180_y1obfjxk7ls.zip
    or look here how to ID board: https://forum-en.msi.com/index.php?topic=107777.msg798546#msg798546

  • K9AGM3 Mobo PS2 Mouse POST Error Message

    I connected a wireless USB combo mouse+keyboard and every time I turn on the PC, I get a POST error message:
    "PS2 mouse not found. Press F1 to continue"
    I tried to update BIOS using the Live update Series but it informed me that I had the lattest version
    Also, there is no halt on errors option in BIOS menu
    How can I get rid of this annoyance?

    Quote from: dpanteli on 12-January-08, 18:17:06
    I connected a wireless USB combo mouse+keyboard and every time I turn on the PC, I get a POST error message:
    "PS2 mouse not found. Press F1 to continue"
    I tried to update BIOS using the Live update Series but it informed me that I had the lattest version
    Also, there is no halt on errors option in BIOS menu
    How can I get rid of this annoyance?
    I have K9AGM3-FIH board, and it's suposed to be HTPC board, and what I get, I can't normally run my home theater without keyboard and mouse , because of "Press F1 to continue". How can I press F1 with remote  ??? Every cheapest MB has halt on error option in bios. C'mon MSI, make a proper bios for this board.

  • I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

    I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

    Hi
    And if You change view - in main "window/view field" so that You see the box-plot structure.
    No exclamation marks there either ?
    and non at the front page ?
    iDVD do not copy Your material - only points to where it is stored. So if on any external hard disks, USB-memories, CDs or DVDs are missing - assetts are broken.
    Or if You changed location of any material or directed iPhoto or iTunes or GarageBand to a new Library - Then iMovie/iDVD also get's lost.
    Yours Bengt W

  • When i try to copy books to my nook, with every single title i continue to get an error message that says 'copy not allowed - no permission to copy the book'. any suggestions on how to fix this?

    when i try to copy books to my nook, with every single title i continue to get an error message that says 'copy not allowed - no permission to copy the book'. any suggestions on how to fix this?

    I had recently updated from Windows 7 to Windows 8.1 and thus had to re download Adobe Digital Editions. I downloaded Version 4.0 but the problem seemed to be with the authorization between the e-reader and the computer. While in ADE click the help button and click erase authorization then re do your user id and password. It worked for me.

  • After my successful download of iTunes 64 bit,I continue to get an error message that it's missing Apple Application Support. What am I doing wrong?

    After my successful download of iTunes 64 bit,I continue to get an error message that it's missing Apple Application Support. What am I doing wrong? I've installed it and uninstalled it several times already, but each time I get that error message...

    I've been getting timed out for 2 days now, what finally worked for me was not plugging the phone into the computer and just doing the update through my wifi, worked perfectly, took less than 15 minutes

  • I continue to get an error message when trying to add Header

    I continue to get an error message when trying to add Header & Footer.  Therefore I am unable to add page numbers to my pdf.  Help!!

    Sounds like the PDF has an issue. You can try to save it, close, and reopen to see if that fixes it. If there are no tags or other markup, you could print it to a new PDF and try on the new file.

  • Get 200+mail daily -upon deleting, mail quits with error message.

    New Mac user.Three problems:
    First, I'm receiving approx. 200+ e-mail ads daily.
    Second, upon attempting to delete these simultaneously, mail quits w/ error message indicating the application has encountered an unexpected error.
    When I delete them individually, I'm able to delete around 3 or 4 before the same thing happens.
    And last but not least:
    When I re-open the mail, any ads I hoped were deleted show back up as new. Any help would be appreciated.
    iMac   Mac OS X (10.2.x)   320MB, 333MHZ

    My Yahoo email account worked just fine on my iPhone 4S  for the last 2 months. Then this morning I started receiving the apple.imap.mail,yahoo error.  I tried all of the steps above in solving the yahoo email issue including numerous hard re-sets and deletions of my yahoo account settings without any success. So I gave up trying to use the default Yahoo setup option.  I added my Yahoo account back as an "other" type email account and then had the option to choose to set it up as a "POP" account instead of an IMAP type. I then just used the server settings recommended from Yahoo Help for a Yahoo Plus Email POP (or just google yahoo plus email pop settings). This works and I am back in business.
    I'm not sure if this will work for yahoo mail classic accounts.
    Frustrating that this issue seems to have been going on for quite awhile and Apple still as not made any acknowledgement of this issue or proposed a fix for those of us that can not resolve the issue with a reset.

  • I am unable to load my Facebook account on iPhoto. I continuously get the following error message: "Unknown error occurred. Please try again later".

    I am unable to load my Facebook account to share using iPhoto. I continuously get the following error message when attempting to do so: "Unknown error occurred. Please try again later".

    In iPHoto preferences ==> accounts delete your Facebook account and re-enter it
    LN

  • I continue to recieve the error message "Could not create key: Verify that you have sufficient access to that key" when I am try to down Akamai NetSession Interface that's needed to download the adobe photoshop elements 13 software that I purchased.

    I continue to receive the error message "Could not create key: Verify that you have sufficient access to that key" when I am try to down Akamai NetSession Interface that's needed to download the adobe Photoshop elements 13 software that I purchased.

    cancel the akamai download and download files 1 of 2 and 2 of 2 directly.  put both in the same directory and double click the exe to start installation.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • How do I open safari after quit unexpectedly error message?

    How do I open safari after quit unexpectedly error message?

    Force quit Safari if required, then reopen while holding the Shift key.
    Check the links below for options to remove the Adware
    http://www.adwaremedic.com/index.php
    Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support

  • My Mac is already authorized by iTunes but I continue to get an error message saying it is not.

    My new Mac has been authorized to play my iTunes music, but I continue to get an error message for two songs that were purchased. The error message asks me do I want to authorize my computer, but when I go through the authorization process I get a message that it is already authorized, click OK, and I immediately get a message this computer is not authorized. Any ideas?

    Hey jbarrett
    I've had this problem before but on a Windows machine. I'm hoping this will still work with your Mac.
    Try trashing the SC Info folder which seems to help iTunes play the songs again.
    You'll need to deauthorize > remove the folder > authorize

  • Since yesterday cannot send PDF continue to get an error message

    since yesterday cannot send PDF continue to get an error message
    [email protected]

    Hi saturno50,
    Please let me know what error message you are getting?
    A screenshot will be most helpful.
    Regards,
    Florence

Maybe you are looking for

  • Obtain the determinat​e data from the NI-DAQmx Simulated Device

    Dear All,        How to config in MAX in order to obtain the determinate data from the NI-DAQmx Simulated Device?        For example, the vi will run when the Digital I/O line is High, but using the Simulated Device, the result is  random. In another

  • Adobe Flash issues

    I have both an Imac, mac book air, and mac book, all running ML. When using either Safari or Chrome, and right click and go to the settings for flash, you can't click on anything. It works fine with Firefox. And I also find video chat always lags. Is

  • Vector MSO not vector in iOS7

    Here are the specs: Adobe InDesign CC Latest release of Content Viewer V28 DPS tools, updated APP builder v28 PDF folio v27 iPad 4 iOS7 Multi State Objects in Indesign files are set up correctly to upscale as vector text. In the Content Viewer this w

  • Garbled messages

    We are using JavaMail api to send emails through SMTP. The messages we send are in HTML format. It works fine normally but occassionally we are getting garbled messages. The content itself looks fine (without any special characters etc.). One peculia

  • Userexit in delivery item

    Hi, Can anyone tell me if there is any userexit for updating the delivery line item status for Intercompany billing VBUP-FKIVP to set this as Relevant for billing. Cheers Sumit