IDVD cuts out audio when burned.

I've created about an hour and half movie in iMovie, added an audio narration track, and rendered it to Garage Band. I added chapters and shared it with iDVD. The layout is great, everything works well. When watching in iDVD, everything, including the audio plays. The disc I'm using has enough space to burn the whole thing, and I don't receive an error message. However, it cuts the last four minutes of audio out every time. The audio is in two different chapters. It hits a certain point in the second to last chapter and cuts it. I created a disc image and have the same problem. I'm on a deadline for work and need some help. Thanks.

Don,
Slides in iDVD created slideshows are considered to be Chapters and many/most set top DVD players drop the audio on Chapter changes. (Many also pause or quit after every 99th image for the same reason).
F Shippey

Similar Messages

Gaps in audio when burning on dvds and cd

When I burn a dvd and add audio, I have gaps in the playback on the audio only.

Hello BCRC,
What make / model computer are you using?
What operating system?
What program are you using to burn the DVD's and CDs?
By gaps are you meaning that there is a gap from one track to the next and you are looking to burn gapless discs, or are you referring to the audio actually skipping parts of the audio when burning?
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Audio volume cuts out voice when bass hits.

i have a hp 2000 an i listen to music some songs the vocals cut out when the bass hits but not others. are the files currupt or what? how can i fix this?

Hi Vince420,
I understand you are having an issue with the sound on your HP 2000 Notebook. Here is a fix you could try.
1. Right click speaker icon (right hand corner)
2. Select Playback devices
3. Right click Speakers
4. Enable it and set as Default
5. Click Apply/Ok
If you require further assistance I would need the model number and current operating system.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

IDVD 3 calibration problems when burning

Help! I'm having calibration error messages when burning iDVD-R discs in iDVD 3. I've had success in the past with Maxell DVD-R 8X discs but other brands and other speeds won't work. I can't find Maxell DVD-R 8X discs anymore. Do I need to update the iDVD software? I'm at a loss to figure this one out.
Swen

hi sue,
i purchased the verbatim dvd-r and burned 1 dvd successfully. unfortunately, it will not burn again and i am prompted with the same error message: Power calibration area error: (0x73, 0x03). what is weird is that when i tried to burn a .mov file using toast, i was prompted with an error similar to the idvd error (0x73, 0x03). Could this be a problem with both idvd and imovie? i am able to burn data onto dvds within toast, just not files that i have created using imovie and idvd. i hope this makes sense!
thanks

Adobe cutting out audio while I'm ripping vinyl

Im using Windows Vista on a Dell Inspiron Laptop
Adobe Audition Version 3.0
While I'm recording vinyl, Audition will cut out occasionally, for just a split second. It is not a problem with my phono plug, as this is never an issue when using Audacity. Only Audition. I have all programs shut off while I'm ripping vinyl, so it shouldn't be a problem with my computer being overloaded. Is there a setting in Audition that's making the program overwhelmed or something? Any ideas on how to fix this? Thanks

Audition and Vista really don't get on that well. I'd upgrade either to XP (which Audition was designed to use) or W7, which appears to be rather better. On the only machine I ever ran Vista on with Audition (only as an experiment) I discovered that when I replaced it with XP, just about everything ran about 30% faster and with less hiccups. Quite frankly, Vista is a complete waste of space - it's the new Windows ME, only worse.

My 3GS 32gb Iphone has just started cutting out even when battery is almost charged - I have to charge it for a short time to prompt it back into action - I now have to watch apps with the charger connected no problems then?

I have just started getting a problem with my 17 month old 3GS 32gb Iphone (no heavy use) in the sense that it keeps randomly cutting out and it requires a short boost charge to get it started again even when the battery is charged between 70 to 90%.
Any suggestions?

Have you tried any of the Basic Troubleshooting Procedures...
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to your Local Apple Store is the Next Step... Be sure to make an appointment first...

Hi Can anyone help. I'm having problem with FaceTime on my IPAD .It connects but cuts out Simolarly when someone calls me it connects , then cuts out ThanksBrian

Hi Having problem with FACETIME on my IPAD Connects to call but then cuts out , similarly calls in connect & cut out Can someone help. Brian

My ipad is doing the same thing to it won't let me except a incoming call on Facebook and I don't know what to do

Photo's out order when burned to disc

Hi, my photo's are in numbered order in the library but when burned to disc are all random,
they have been edited from 3 cards and saved as a smart colllection, how can I get them
to burn in order as library shows them !! thanks steve

You use the Export Dialog by clicking on <Export> bottom - left in the Library Module. See Screen shot:
This will open the Export Dialog. The second section from the top is <File Naming>. Click on the small triangle, see screen shot:
And select <Edit> from the list.
This will bring up the <File name Editor> where you can specify various parameters for renaming. i would suggest that you add sequential numbers in front of the file name to preserve the order of images. In the screen shot below I have selected a sequential number that will go from 1 to 10000 plus the existing file name.
Then click <Done> and <OK> and export your images to a location of your choice.
Since you are a newbie to Lr it would be good if you would watch some of the video tutorials on Adobe's website. Lr is a complex program and without the tutorials you will make mistakes and get frustrated. The links for the video tutorials are on the main page of this forum, to the right where it says <getting Started with Lightroom 4>.
Go to this link http://tv.adobe.com/show/learn-lightroom-4/ and at the bottom you will find specific tutorials for exporting.

ITunes Cuts Out Periodically When Using Airport Express

I have a new Airport Express (with current software) hooked up to my Bose Home Theater system. I am streaming iTunes the Stereo but it periodically cuts out. Apple Help had me reset my Extreme and 2x Expresses to Channel 6. Still cuts out periodically, but much less than before. Anyone else seen this and can offer what to do?
Thanks,

i just bought a brand new airport express from apple and hooked it up to my brand new speakers. it also started periodically cutting out. so i followed apple's advice and tried different channels on my router. i went from 1 to 11 and still had the same problem.
then i tried decreasing my security down to WEP 40-bit. still had the same problem.
then i tried moving the airport to the middle of the room, about 6 feet away from both router and macbook pro. still the same problem. btw - i was using an optical cable from airport to speakers.
then i removed all security from my belkin router - and it worked. in the end i sent it back to apple for a refund. there's no way i can have my router running without security.

Out of sync audio when burning a DVD with iDVD

Hello Folks,
I'm trying to burn 3 - 1 minute quicktime files to a DVD using iDVD 7.1.2 and everytime I burn a disc the sound is out of sync. It seems to speed up and finish about 10 seconds earlier than the video. When previewed all is fine. I have checked the 3 quicktime files and they are perfectly in sync when played. Any suggestions ?
Thanks

Hi Bengt,
Thanks for replying ! I spoke with tech support and we tried everything including saving it as a disk image but after the burn it still was out of sync.
Then we tried creating a project in i Movie and then imported (shared) the project into i DVD and it worked !
This was a frustrating issue to tackle but I'm ready for it if it happens again.
Thank you very much for your help. Have a great day.
Best regards,
Joe F

Garbled audio when burning to idvd 08

I have idvd 7.0.1 and imovie 6.0.3. Everytime I burn my present project it burns seemingly without errors. But then when i put it in my mac it just spits it the dvd without playing it. I've then taken the dvd and put it in a dell laptop and the dvd video plays fine but the audio is garbled. Any suggestions on what might be wrong and how to fix the problem? Thanks in advance for your help.

Hi
Three thoughts.
• free space on internal (start-up) hard disk ? 25Gb or more ?
• How did You go from iMovie to iDVD ? via Share/Export to iDVD" within iMovie ?
I don't I close iMovie and open iDVD then either drop the movie icon (with a Star on it)
or import it into iDVD.
• Upgraded to QuickTime 7.5 - seems to give problems in many cases
Yours Bengt W

No audio when burning from idvd 6.01

I have been watching this discussion point for several days as I have had exactly the same problem. I have created a 40 minute iMovie with 10 audio tracks then went to share it with iDVD. The movie came across but the audio didn't - just a horrible crackling noise. I just kept trying and on the 6th attempt it came through with the sound attached - I did lock the audio tracks to the relevant playheads as someone had suggested. But then I came to burn the dvd and idvd 6.01 went all the way to the encoding process then hung on the very last audio encoding forcing me to Force Quit.
So with the newly aquired tip about burning a disk image instead of burning direct from iDVD I first deleted the encoded assets - also kindly suggested on this forum then using Disk Utility I selected my disk image ann hit burn.
Hey Presto!! It worked, I now have all my underwater video set to music that I can bore everyone (except me) with. Thanks to everyone who takes the time to offer help and suggestions on this forum. It clearly is a bug that Apple needs to fix but at least I have been lucky enough to get around the problem.

I can bore everyone (except me) with

No audio when burning a DVD from iMovie to iDVD

Hope someone can help me here, I'm not getting any audio on the DVD I've burnt even though it's working fine in the preview screen on my desktop. Even the audio from the theme I've chosen isn't coming through.
I'm using iMovie HD 5.0.2 and iDVD 5.0.1

even though it's working fine in the preview screen on my desktop.
You can't really depend on the preview function to pick up problems with a burn. That is the reason that saving to disc image is recommended. If that works, then the burned DVD will be ok.

E205 Audio cuts out occasionally when opening laptop

I think this happens, say, 25% of the time. I'll close the laptop, and later open it, and until I reboot, I won't have any audio, I have the latest audio drivers installed from Realtek, so I can't put my finger on what it could be. Anybody else getting this problem?

In 'alsamixer' I have a setting called ''Headphone Jack Sense' which if enabled mutes the speaker when a headphone jack is inserted.
What's the output of
amixer get 'Headphone Jack Sense'
When posting configs, code or command output, please use [ code ] tags, not [ quote ] tags https://bbs.archlinux.org/help.php#bbcode
like this
It makes the code more readable and - in case of longer listings - more convenient to scroll through.

Missing Audio When Burning A DVD For Grandma

I've created a short 8 minute video with an audio track on top of it. The 8 minutes consists of a 2 minute video opening created in quicktime. 4 minute slide show imported from iPhoto and 2 minutes of closing credits created in iMovie. The 8 minute soundtrack was created in garage band using several iTunes tracks. (I'M TRYING TO BE ALL APPLE!!)
Everything looks great when I preview in iDVD. However, when I burn the dvd the audio drops out about 3 minutes into the video and then starts up again at the very end (out of synch of course).
I've tried everything I can think of - created an image in iDVD and burned using disc utilities , swapped out the audio tracks, changed the photos...still nothing works.
Any suggestions?? We have a first birthday coming up and we really want to get this to Grandma. Thanks.

Hi
Can be audio from iTunes or strange file formats eg .mp3 etc.
iTunes - Copy out as an Audio-CD .aiff
Other audio formats - convert to .aiff 48kHz 16-bit
Use this and it most probably works.
Yours Bengt W

IDVD cuts out audio when burned.

Similar Messages

Maybe you are looking for