IDVD Disk Image - How long does it take?

Hi,
I exported my iMovie to iDVD, added the necessary effects and am now trying to save it as a disk image for ripping out DVDs later. How long does the "Save as Disk Image" process normally take? Mine has been at it for over 2 hours now. It seems to be stuck in the "Process Menus" stage and says "Rendering menu video asset...". Last time it got stuck at this same place , so I cancelled it and rebooted the machine. Now it seems to be stuck again at the same place. Any ideas how long this typically takes?
Thanks.

depending on processor (G4, 5, quad, dualcore, Intel), MHz/GHz, size of RAM, speed of hd … you have to calculate between realtime and 10x length of project.... (1h project=10h rendering)
reading in your specs "macbook": make sure, 10 - 20 GB are free on internal drive to make iDVD working smooth..........

Similar Messages

  • "How long does it take to do a dist-upgrade on your distro?"

    Yesterday there was a question in the USALUG.org "How long does it take to do a dist-upgrade on your distro?"
    This question was a good question, so I decide to make the ultimate test. I have a lot of computers standing here around, and remembered that on one of them was have already Archlinux installation. I was right, when I booted, the system check said me, that the system was 253 days not checked anymore. I got so excited that I forgot to check was it one of my 0.7.2 Gimmick or 0.8 Voodoo installations.
    The Computer
    Dell OptiPlex GX110
    [jada@arch-02 ~]$ cat /proc/cpuinfo
    processor : 0
    vendor_id : GenuineIntel
    cpu family : 6
    model : 8
    model name : Pentium III (Coppermine)
    stepping : 6
    cpu MHz : 797.452
    cache size : 256 KB
    fdiv_bug : no
    hlt_bug : no
    f00f_bug : no
    coma_bug : no
    fpu : yes
    fpu_exception : yes
    cpuid level : 2
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat p se36 mmx fxsr sse up
    bogomips : 1596.45
    clflush size : 32
    [jada@arch-02 ~]$
    I used the following command for the update
    $ time pacman -Syu
    The Test
    first update pacman
    [root@arch-02 jada]# pacman -Syu
    warning: current locale is invalid; using default "C" locale
    :: Synchronizing package databases...
    core 23.8K 80.0K/s 00:00:00 [#####################] 100%
    extra 310.5K 292.3K/s 00:00:01 [#####################] 100%
    community 341.0K 295.8K/s 00:00:01 [#####################] 100%
    :: Starting full system upgrade...
    :: Replace mktemp with core/coreutils? [Y/n] y
    :: Replace mpg321 with extra/mpg123? [Y/n] y
    warning: bind: forcing upgrade to version 9.4.2-1
    warning: cpufrequtils: forcing upgrade to version 002-3
    warning: dnsutils: forcing upgrade to version 9.4.2-1
    warning: flex: forcing upgrade to version 2.5.33-4
    warning: opera: forcing upgrade to version 9.25-2
    :: pacman has detected a newer version of the "pacman" package.
    :: It is recommended that you allow pacman to upgrade itself
    :: first, then you can re-run the operation with the newer version.
    :: Upgrade pacman first? [Y/n] y
    resolving dependencies... done.
    looking for inter-conflicts... done.
    Targets: libarchive-2.4.11-1 libdownload-1.3-1 pacman-3.1.1-1
    Total Package Size: 1.19 MB
    Proceed with installation? [Y/n] y
    :: Retrieving packages from core...
    libarchive 314.8K 253.4K/s 00:00:01 [#####################] 100%
    libdownload 49.4K 97.9K/s 00:00:01 [#####################] 100%
    pacman 855.2K 460.4K/s 00:00:02 [#####################] 100%
    checking package integrity... done.
    cleaning up... done.
    (3/3) checking for file conflicts [#####################] 100%
    (1/3) upgrading libarchive [#####################] 100%
    (2/3) upgrading libdownload [#####################] 100%
    (3/3) upgrading pacman [#####################] 100%
    >>> The makepkg.conf syntax has changed, please note the new format
    >>> when merging the pacnew file with your old configuration.
    >>>
    >>> The pacman.conf default file has changed. Please update your
    >>> config to use the single mirrorlist, and any additional files
    >>> in /etc/pacman.d/ (core, extra, etc.) can be deleted.
    >>>
    >>> The location of sync DBs has moved from /var/lib/pacman/ to
    >>> /var/lib/pacman/sync/ for several reasons. To delete older
    >>> DBs, please run pacman -Sc and follow the instructions.
    >>> You will also have to run pacman -Sy to refresh the sync DBs.
    >>>
    >>> abs is no longer included; please install the 'abs' package
    >>> to use abs. You may need to edit abs.conf to re-enable repos.
    [root@arch-02 jada]#
    restart pacman 3.1.1 and update the packages
    [root@arch-02 jada]# time pacman -Syu
    :: Synchronizing package databases...
    core 23.8K 80.3K/s 00:00:00 [#####################] 100%
    extra 310.5K 261.1K/s 00:00:01 [#####################] 100%
    community 341.0K 302.5K/s 00:00:01 [#####################] 100%
    :: Starting full system upgrade...
    :: Replace mktemp with core/coreutils? [Y/n] y
    :: Replace mpg321 with extra/mpg123? [Y/n] y
    warning: bind: forcing upgrade to version 9.4.2-1
    warning: cpufrequtils: forcing upgrade to version 002-3
    warning: dnsutils: forcing upgrade to version 9.4.2-1
    warning: flex: forcing upgrade to version 2.5.33-4
    warning: opera: forcing upgrade to version 9.25-2
    resolving dependencies...
    warning: dependency cycle detected:
    warning: bash will be installed before its glibc dependency
    warning: dependency cycle detected:
    warning: readline will be installed before its glibc dependency
    warning: dependency cycle detected:
    warning: ncurses will be installed before its glibc dependency
    warning: dependency cycle detected:
    warning: db will be installed before its coreutils dependency
    looking for inter-conflicts...
    Remove: mktemp mpg321
    Total Removed Size: 0.08 MB
    Targets: ncurses-5.6-6 readline-5.2-7 bash-3.2.033-2
    kernel-headers-2.6.23.1-2 tzdata-2007k-1 glibc-2.7-7 attr-2.4.39-2
    acl-2.2.45-2 cracklib-2.8.10-5 gcc-libs-4.2.3-3 db-4.6.21-2
    pam-0.99.9.0-2 shadow-4.0.18.2-2 coreutils-6.10-2 libtool-1.5.26-1
    mpg123-1.2.0-1 fontconfig-2.5.0-1 zlib-1.2.3-4 libpng-1.2.24-1
    cairo-1.4.14-1 libtasn1-1.3-1 lzo2-2.02-3 libgpg-error-1.6-1
    libgcrypt-1.4.0-1.1 opencdk-0.6.6-1 gnutls-2.0.4-1 libcups-1.3.5-1
    pcre-7.6-2 glib2-2.14.5-1 pango-1.18.4-1 gtk2-2.12.7-1
    binutils-2.18-5 gmp-4.2.2-2 mpfr-2.3.1-1 gcc-4.2.3-1
    glproto-1.4.9-1 libgl-7.0.3rc1-1 mesa-7.0.3rc1-1 acroread-8.1.2-1
    dialog-1.1_20071028-1 pciutils-2.2.8-3 alsa-utils-1.0.15-2
    e2fsprogs-1.40.4-1 apr-1.2.12-1 gdbm-1.8.3-5 apr-util-1.2.12-1
    openssl-0.9.8g-2 apache-2.2.8-1 jack-audio-connection-kit-0.109.0-1
    kde-common-3.5.8-3 libxmu-1.0.4-1 qt3-3.3.8-6.1 arts-1.5.8-2
    diffutils-2.8.1-5 gawk-3.1.6-2 m4-1.4.10-3 autoconf-2.61-3
    perl-5.8.8-9 automake-1.10.1-2 filesystem-2007.11-6 avahi-0.6.20-3
    bftpd-2.1-1 bin86-0.16.17-3 dnsutils-9.4.2-1 bind-9.4.2-1
    bison-2.3-4 bluez-libs-3.24-1 libusb-0.1.12-3 bluez-utils-3.24-2
    bridge-utils-1.2-2 bzip2-1.0.4-3 cairomm-1.4.6-1 cmake-2.4.8-1
    cpio-2.9-3 sysfsutils-2.1.0-4 cpufrequtils-002-3
    device-mapper-1.02.24-1 popt-1.10.6-3 cryptsetup-1.0.5-5
    csup-20060318-5 cups-1.3.5-1 curl-7.18.0-1 dbus-qt3-0.62-3
    dcron-3.2-3 dhcpcd-3.2.0-1 dmapi-2.2.8-3 libxml2-2.6.31-1
    docbook-xsl-1.73.2-1 dosfstools-2.11-2 dvd+rw-tools-7.0-4 ed-0.8-3
    enlightenment-0.16.8.11-1 gnome-desktop-2.20.3-1 eog-2.20.4-1
    libidl2-0.8.10-1 mozilla-common-1.1-2 xulrunner-1.8.1.11-1
    epiphany-2.20.3-1 eventlog-0.2.5-2 ghostscript-8.61-1
    gnome-keyring-2.20.3-1 libsasl-2.1.22-5 libldap-2.3.39-2
    smbclient-3.0.28A-1 gnome-vfs-2.20.1-1 libdjvu-3.5.20-1
    poppler-0.6.3-1 poppler-glib-0.6.3-1 evince-2.20.2-1 evms-2.5.5-5
    libsoup-2.2.104-1 evolution-data-server-1.12.3-1 exiv2-0.15-1
    faad2-2.6-1 grep-2.5.3-3 sed-4.1.5-3 fakeroot-1.9.2-1 fbset-2.1-2
    file-4.23-1 file-roller-2.20.3-1 findutils-4.2.32-1
    firefox-2.0.0.12-1 flashplugin-9.0.115.0-2 flex-2.5.33-4
    font-bitstream-speedo-1.0.0-4 font-misc-ethiopic-1.0.0-4
    font-misc-meltho-1.0.0-4 freeglut-2.4.0-3 freetype1-1.3.1-4
    glib-1.2.10-7 gtk-1.2.10-8 imlib-1.9.15-4 libstroke-0.5.1-2
    fvwm-2.4.20-2 gail-1.20.2-1 gc-7.0-2 gdb-6.7.1-1
    gtksourceview2-2.0.2-1 libgnomecups-0.2.3-1 libgnomeprint-2.18.3-1
    libgnomeprintui-2.18.2-1 python-2.5.1-5 pygobject-2.14.1-1
    pygtk-2.12.1-1 gedit-2.20.4-1 gen-init-cpio-2.6.17-3
    gettext-0.17-1 librsvg-2.20.0-1 gimp-2.4.4-1 gkrellm-2.3.1-2
    glibmm-2.14.2-1 gmime-2.2.16-1 gnokii-0.6.22-3
    gnome-menus-2.20.3-1 libwnck-2.20.3-1 gnome-panel-2.20.3-1
    gstreamer0.10-0.10.15-1 gstreamer0.10-base-0.10.15-1
    gstreamer0.10-alsa-0.10.15-1 gucharmap-1.10.2-1 libgtop-2.20.1-1
    gnome-applets-2.20.1-1 metacity-2.20.2-1 libbeagle-0.3.0-3
    nautilus-2.20.0-4 gnome-control-center-2.20.3-1
    gnome-python-2.20.1-1 gnome-python-desktop-2.20.0-3 guile-1.8.3-1
    gnome-games-2.20.3-1 gnome-power-manager-2.20.2-1
    tcp_wrappers-7.6-8 gnome-session-2.20.3-1 gtkmm-2.12.3-1
    gnome-system-monitor-2.20.2-1 vte-0.16.12-1 gnome-terminal-2.18.4-1
    gnome-utils-2.20.0.1-2 gnupg-1.4.8-1 libassuan-1.0.4-1
    gnupg2-2.0.8-1 gpgme-1.1.6-1 gpm-1.20.1-7 groff-1.19.2-4
    grub-0.97-9 gstreamer0.10-cdparanoia-0.10.15-1
    gstreamer0.10-gnomevfs-0.10.15-1 gstreamer0.10-ogg-0.10.15-1
    gstreamer0.10-vorbis-0.10.15-1 gtkhtml-3.16.3-1 gutenprint-5.0.2-1
    vi-7.1.228-1 vim-7.1.228-1 gvim-7.1.228-1 gzip-1.3.12-4
    hal-info-0.20071212-1 hdparm-7.7-3 usbutils-0.73-5 wget-1.11-1
    hwd-5.3.2-1 hwdetect-0.9-1 icewm-1.2.35-1 ifenslave-1.1.0-3
    imagemagick-6.3.8.0-1 intltool-0.37.0-1 iproute-070710-3
    iptables-1.3.8-2 iputils-20070202-4 isdn4k-utils-3.2p1-3
    jfsutils-1.1.12-2 jre-6u3-2 kbd-1.12.20070827-2 kdelibs-3.5.8-4
    lm_sensors-3.0.1-1 xorg-xauth-1.0.2-1 kdebase-3.5.8-3
    qscintilla-qt3-1.7.1-2 kdebindings-3.5.8-2 libgphoto2-2.4.0-4
    poppler-qt3-0.6.3-1 kdegraphics-3.5.8-3 sqlite3-3.5.6-1
    libopensync-0.34-1 kdepim-3.5.8-2 klibc-1.5-3 klibc-extras-2.3-1
    klibc-udev-116-2 klibc-module-init-tools-3.2.2-1
    mkinitcpio-0.5.17-2 module-init-tools-3.2.2-5 kernel26-2.6.24.1-2
    less-418-1 lftp-3.6.3-1 libao-0.8.8-2 orbit2-2.14.12-1
    libbonobo-2.20.3-1 libcdio-0.79-1 libelf-0.8.10-3 libevent-1.3d-2
    libgdiplus-1.2.6-1 libmikmod-3.1.12-1 libmysqlclient-5.0.51-2
    libpcap-0.9.8-2 libsamplerate-0.1.2-4 libtar-1.2.11-3
    libxfont-1.3.1-2 licenses-2.3-1 lilo-22.8-2 links-2.1pre33-1
    logrotate-3.7.5-1 lua-5.1.3-1 lvm2-2.02.33-1 mailx-8.1.1-5
    make-3.81-3 man-1.6f-2 man-pages-2.77-1 mdadm-2.6.4-1
    mono-1.2.6-1 mutt-1.5.17-4 mysql-clients-5.0.51-3 mysql-5.0.51-3
    nano-2.0.7-1 net-tools-1.60-13 netkit-ftp-0.17-4
    netkit-telnet-0.17-7 nfsidmap-0.20-2 portmap-6.0-2
    nfs-utils-1.1.0-3 ngrep-1.45-4 nmap-4.53-1 ntp-4.2.4p4-4
    openssh-4.7p1-6 openvpn-2.0.9-3 opera-9.25-2 orca-2.20.3-1
    patch-2.5.4-4 pcmciautils-014-3 php-5.2.5-3 pilot-link-0.12.3-1
    pine-4.64-4 pkgconfig-0.22-3 procps-3.2.7-4 libx86-0.99-1
    vbetool-1.0-2 pm-utils-0.99.4-1 qt-4.3.3-4 poppler-qt-0.6.3-1
    postgresql-libs-8.2.6-1 postgresql-8.2.6-1 ppp-2.4.4-6
    procinfo-19-2 psmisc-22.6-1 qca-2.0.0.svn744387-1.1 qca-qt3-1.0-1
    qca-tls-1.0-5 qscintilla-2.1-3 reiserfsprogs-3.6.20-3
    rp-pppoe-3.8-2 rsync-2.6.9-4 samba-3.0.28A-1 screen-4.0.3-5
    seahorse-2.20.3-1 shared-mime-info-0.23-1 sudo-1.6.9p12-1
    sysklogd-1.5-1 syslog-ng-2.0.6-1 util-linux-ng-2.13.0.1-2
    sysvinit-2.86-4 taglib-1.4.0.svn744384-1 tar-1.19-2 tcl-8.5.1-1
    tcpdump-3.9.8-1 tcsh-6.15.01-1 thunderbird-2.0.0.9-2 tk-8.5.1-1
    totem-plparser-2.21.91-1 totem-2.20.1-3 ttf-dejavu-2.23-1
    udev-116-3 unichrome-dri-7.0.3rc1-1 unzip-5.52-3
    vorbis-tools-1.1.1-7 which-2.19-2 whois-4.7.24-1
    wireless_tools-29-2 wireshark-0.99.7-1 wpa_supplicant-0.5.9-1
    xaw3d-1.5-4 xchat-2.8.4-2 xf86-input-evdev-1.2.0-1
    xf86-input-joystick-1.3.1-1 xf86-video-ati-6.7.197-2
    xf86-video-mga-1.9.100-2 xf86-video-nv-2.1.7-1
    xf86-video-s3virge-1.9.1-9 xf86-video-savage-2.1.3-2
    xf86-video-sis-0.9.4-2 xfsprogs-2.9.4-2 xfsdump-2.2.46-3
    wavpack-4.41.0-3 xine-lib-1.1.10-1 xinetd-2.3.14-3
    xkeyboard-config-1.1-1 xmms-1.2.11-1 xorg-server-1.4.0.90-6
    xorg-xinit-1.0.7-3 xscreensaver-5.04-2 yelp-2.20.0-3
    zenity-2.20.1-1
    Total Download Size: 743.90 MB
    Total Installed Size: 748.87 MB
    Proceed with installation? [Y/n]
    Proceed with installation? [Y/n] y
    :: Retrieving packages from core...
    ncurses-5.6-6-i686 1738.2K 518.0K/s 00:00:03 [#####################] 100%
    readline-5.2-7-i686 271.5K 228.3K/s 00:00:01 [#####################] 100%
    bash-3.2.033-2-i686 407.1K 299.1K/s 00:00:01 [#####################] 100%
    kernel-headers-2.6.2... 621.6K 376.8K/s 00:00:02 [#####################] 100%
    tzdata-2007k-1-i686 610.7K 329.0K/s 00:00:02 [#####################] 100%
    xorg-server-1.4.0.90... 7.4M 659.0K/s 00:00:11 [#####################] 100%
    xorg-xinit-1.0.7-3-i686 14.4K 56.9K/s 00:00:00 [#####################] 100%
    xscreensaver-5.04-2-... 8.0M 655.2K/s 00:00:13 [#####################] 100%
    yelp-2.20.0-3-i686 603.4K 356.7K/s 00:00:02 [#####################] 100%
    zenity-2.20.1-1-i686 1896.3K 546.6K/s 00:00:03 [#####################] 100%
    :: Retrieving packages from community...
    freetype1-1.3.1-4 119.9K 129.5K/s 00:00:01 [#####################] 100%
    gkrellm-2.3.1-2 724.3K 411.1K/s 00:00:02 [#####################] 100%
    xmms-1.2.11-1 1945.1K 557.0K/s 00:00:03 [#####################] 100%
    checking package integrity...
    (349/349) checking for file conflicts [#####################] 100%
    ( 1/349) upgrading ncurses [#####################] 100%
    ( 2/349) upgrading readline [#####################] 100%
    ( 3/349) upgrading bash [#####################] 100%
    ( 4/349) upgrading kernel-headers [#####################] 100%
    ( 5/349) upgrading tzdata [#####################] 100%
    ( 6/349) upgrading glibc [#####################] 100%
    (340/349) installing wavpack [#####################] 100%
    (341/349) upgrading xine-lib [#####################] 100%
    (342/349) upgrading xinetd [#####################] 100%
    (343/349) upgrading xkeyboard-config [#####################] 100%
    (344/349) upgrading xmms [#####################] 100%
    (345/349) upgrading xorg-server [#####################] 100%
    :: Could not detect nvidia-utils on system
    :: Will attempt to use built-in libwfb
    (346/349) upgrading xorg-xinit [#####################] 100%
    (347/349) upgrading xscreensaver [#####################] 100%
    (348/349) upgrading yelp [#####################] 100%
    (349/349) upgrading zenity [#####################] 100%
    real 56m46.062s
    user 4m25.013s
    sys 1m46.520s
    [root@arch-02 jada]#
    And for your tread question.
    How long does it take to do a dist-upgrade on your distro?
    one hour
    real    56m46.062s
    user    4m25.013s
    sys     1m46.520s
    After reboot the system loads all new applications with out any problem. Later I replaced the intel-video driver "xf86-video-i810 1.7.4-6" with the driver xf86-video-intel 2.2.0-2. No problems at all.
    Archlinux rocks

    JaDa wrote:Archlinux rocks
    definitely. By contrast, here's a regular upgrade on my debian box -- out of the blue it's having some problem with one of the packages, and it's turning into a regular recursive nightmare.
    root@moe:~ # apt-get upgrade
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    You might want to run 'apt-get -f install' to correct these.
    The following packages have unmet dependencies.
    E: Unmet dependencies. Try using -f.
    root@moe:~ # apt-get -f install
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    Correcting dependencies...Done
    The following extra packages will be installed:
    exim4-base exim4-daemon-light
    Suggested packages:
    exim4-doc-html exim4-doc-info eximon4 libmail-spf-query-perl
    The following packages will be upgraded:
    exim4-base exim4-daemon-light
    2 upgraded, 0 newly installed, 0 to remove and 64 not upgraded.
    1 not fully installed or removed.
    Need to get 0B/1391kB of archives.
    After unpacking 8192B of additional disk space will be used.
    Do you want to continue [Y/n]?
    Preconfiguring packages ...
    dpkg: exim4-daemon-light: dependency problems, but removing anyway as you request:
    exim4 depends on exim4-daemon-light | exim4-daemon-heavy | exim4-daemon-custom; however:
    Package exim4-daemon-light is to be removed.
    Package exim4-daemon-heavy is not installed.
    Package exim4-daemon-custom is not installed.
    dpkg: error processing exim4-daemon-light (--remove):
    Package is in a very bad inconsistent state - you should
    reinstall it before attempting a removal.
    Errors were encountered while processing:
    exim4-daemon-light
    [ Rootkit Hunter version 1.3.0 ]
    File updated: searched for 152 files, found 131
    E: Sub-process /usr/bin/dpkg returned an error code (1)
    root@moe:~ # apt-get install exim4-daemon-light
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    You might want to run 'apt-get -f install' to correct these:
    The following packages have unmet dependencies.
    exim4-daemon-light: Depends: exim4-base (>= 4.69) but 4.68-2 is to be installed
    E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
    root@moe:~ #
    It's so "delicate" and temperamental compared to the no-nonsense, straightforward approach of Arch. If one little thing is off, the entire system has a hissy-fit and won't do anything until you hunt the internet high and low searching for a solution, encountering all the debian hawks along the way who are ready to rip your head off at the first suggestion that debian isn't directly from god and could have a problem. Imo, Arch is the best linx distro hands down. Nothing else even comes close.

  • How long does it take to show changed cover_artwork?

    Two weeks ago I changed my coverart for my podcast.  I did it through using the Blubrry Plugin for WP.
    How long does it take to make the change in Itunes as my old coverart is still showing?
    thanks!
    Jeremy

    The image is correctly referenced in that feed. However searching on the title in the Store brings up two podcasts. One is using a feed at
    http://carolinaadi.audioacrobat.com/rss/athlete_by_design.xml
    and the Store page is at https://itunes.apple.com/gb/podcast/athlete-by-design/id323625134?mt=2
    which has only one episode with no media, and so appears empty in the Store:
    the other is using the feed at
    http://www.athletebydesign.com/category/athetebydesignpodcast/feed
    and the Store page is at https://itunes.apple.com/gb/podcast/athlete-by-design-athlete/id553110811?mt=2
    which has a different collection of episodes from the feed you linked to though the latest episode is the same. The image is correctly referenced here as well, so it's going to be just a question of waiting.

  • HT1444 How long does it take to download Mountain Lion

    How long does it take to download Mountain Lion

    Just as an example, on a 15Mbps download speed, approximately 2 to 2-1/2 hours.
    Keep in mind, for downloading Mountain Lion from the App Store, a high speed (broadband) internet connection is strongly recommended by Apple as noted here > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
    If you need to reinstall OS X or repair the the startup disk using Mountain Lion Recovery, that requires broadband access to the internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the internet form Apple when OS X Recovery is used for reinstallation.

  • How long does it take to download mountain lion upgrade?

    how long does it take to download the upgrade for mountain lion

    Keep in mind, for downloading Mountain Lion from the App Store, a high speed (broadband) internet connection is strongly recommended by Apple as noted here > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
    If you need to reinstall OS X or repair the the startup disk using Mountain Lion Recovery, that requires broadband access to the internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the internet form Apple when OS X Recovery is used for reinstallation.

  • How long does it take to create a recovery disc?

    Hi!!!
    I have just bought a Toshiba Portege T110.
    I tried the first time round and cancelled at disc 4 bec i was out of writeable disc.
    Today i am on my 2nd try.  I have mgt disc 1-3.  When at disc 4~~it says is creating Windon Recovery Environment (64bit) and recording.  But the progress bar has been hanging there for the abt 1-2hrs and still not done yet~~
    I tried to cancel the program, but it says is recording and advise me not to cancel as it will take a long time.
    Can some kind soul advise if this is normal?  How long does it takes?  If not, what could be the problem?
    Thank you in advance!!!

    Hi all~~
    i have the answer to my question alrdy~~
    i accidentatly canceled the copying after waiting over 2 hr on disc 4~~
    I restarted the process this morning~~~as i have alrdy done disc 1-3~~i am able to start at disc 4 straight away!!!
    Disc 4 took less then 10 mins to complete. 
    So guys~~ the whole process from disc 1 to 4 takes less than 1 hr.
    All the best to you guys!!
    And Merry Christmas!!

  • So how long does it take to load a 160GB iPod using the Convert Higher ...

    I have a 160GB Gen 5 that I bought when first released back in the day when they were $400. Through a number of changes, the most recent being the advent of the Convert Higher Bitrate Songs to 128bit AAC feature, I decided to look at what more music I could store. After all was said and done, I ended up with a bit of a disaster with cover art not being properly applied to the music being played. I decided to *restore the ipod* based on suggestions in the discussion boards, and equally important was following the hints and tips here.
    http://www.samsoft.org.uk/iTunes/grouping.asp
    The advice is especially important in very large library situations to ensure you have uniqueness in the albums you want to display. Hadn't really given it much thought until I had the ability to see the individual albums for the 40K songs on the iPod via the cover art view.
    Finally the point of the post...
    *So how long does it take to load a 160GB iPod using the Convert Higher Bitrate option now available in iTunes 9.1?* The specs on my computer are not highend by any stretch, but it's no slouch, and neither of the CPUs are ever pegged. At this point I've lost count of how much time it's taken, but the load is going on 3-4 days. With some breaks in between because I need to check each incremental load to verify there is no cover art corruption, correct bad tags and such, but for the most part the loading is visibly slow, and I'm sure the conversion is the cause. I'm not really complaining at this point, but there is clearly room for improvement. And of course unless there is a redo involved in which case I will get quite cranky.
    *I would like to hear the experiences of others.*
    Finally to lend a bit more credence to the performance concern, my 32GB iPhone 3GS for only about say 28GB of music takes about 24 hrs to load from a 2.2GHz dual core intel laptop, again using the convert higher bitrate option.

    With AC power adapter it takes 3-4 hours for a full charge. With the USB charger it takes 9-0 hours for a full charge. I am not happy with them removing the AC charger and other accessoreis at all. It's business but it still stinks.
    I know I would rethink my purchase but would most likely end up buying the Micro anyway

  • HT5071 After submission, how long does it take for a new book to appear in the iBook store?

    How long does it take for a new book to appear in the iBook store after you have submitted it successfully? I submitted a free book last night. No sign of it 6 hours later ... If the delay is because process are being followed, what ate they? Any ideas?

    5-10 days in November.

  • How long does it take for Apple to send the content code for a free upgrade to Mountain Lion?

    Has anyone managed to successfully receive the content code in their email for a free ugprade to Mountain Lion?
    I bought my MBP on 14 July so I qualified for the free upgrade. Went to the website and filled in the form along with my serial number about 2 nights ago. Still haven't received my content code yet. How long does it take? Should I be speaking to someone already? Who?
    Thanks.

    We are being advised it can take up to 72 hours !

  • Time machine migration, how long does it take?

    Im going to migrate to another mac using time machine, how long does it take (time machine/main hdd in the old mac was at about 700gb capacity)

    There is no way of determining that. The time is dependent on a number of different factors.
    Barry

  • No i'm using iPhone 4 16GB. i want to know how long does it take for "Erase All Content and Settings"?does it affects to iPhone's hardware? and if i want to restore my software in iPhone back, how i can do it?

    no i'm using iPhone 4 16GB. i want to know how long does it take for "Erase All Content and Settings"?does it affects to iPhone's hardware? and if i want to restore my software in iPhone back, how i can do it?

    it takes hours
    it does not damage or wear out hardware
    and you can restore any backup afterwards as yo see fit

  • How long does it take to get my X61 checked from water spill?

    Hi,
    I had spilled some water into my X61 yesterday.
    Though I instantly shut it down and try to clean, I was too stupid to try to boot it in ten minutes.
    Not sure if it is "OK" right now....
    Does anyone have the same experience?
    Could you share how long does it take you to have your laptop shipped and checked at lenovo repair center?
    Thanks a lot!

    do you have accidental damage warranty? if you don't then you will incur a hefty bill. The check up should not take more than 5 days including shipping, provided that no parts need to changed, if there is parts that are required, then depending on the parts availability, you could wait up to a month or two. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • HOW LONG DOES IT TAKE TO GET iPHOTO BOOK?

    I would like to order my first HARD COVER book and since I am not living in USA, my friend would bring the book back to Europe.
    But the only problem is that, she will be there only two days, so the book must be at the address, she will be living on 9th of February.
    When do I need to place the order? How long does it take to get the album?
    Thank you for your help.

    Can't say - no idea where it is going to or what will be going on them
    If it were me I'd say that the extra cost was a cheap insurance policy against external forces messing things up - but you make that decision
    Waiting three days to order and shipping ground rather than express will increase the chances of it not making it - probably still 95% + (guessing of course) that it will but every day you wait makes the chances less and not using the fastest shipping also increases the chances of failure
    If money is the issue then ordering today rather than Wed would be a good idea to me
    Good Luck
    LN

  • How long does it take to get my money back

    Okay...I bought an app which I didn't liked...it cost 3.99 ... Then I reported the app and they send me an email saying ::::Recently you indicated a problem with Photo Director-HD Pro -make picture slide show music video .......by using the report a problem with iTunes. This email confirms that you have been awarded a refund of 4.32 on this purchase.i bought the app on December26,2013 ..
    I have many questions
    How I'm getting my money back?
    How long does it take to get my money back?
    Do I even getting my money back or not?
    Please I need to know!!!! :'(

    I had a similar experience yesterday. The Apple email that I got said:
    "In five to seven business days, a credit of xx USD should be posted to the credit card that appears on the receipt for that purchase."
    Your email should have said the same.
     Cheers, Tom

  • How long does it take to get approval from iTunes Connect and how do I find out if they are working on it?

    How long does it take to get approval from iTunes Connect and how do I find out if they are even working on it? I'm not really sure if my application was even delivered - from the links in IBA. Any suggestions how one might push the right buttons at Apple?
    Also went around in a big circle trying to get beyond the confusion of not having the right Apple ID when I've had it a long time. Confusion abounds and learning this forum also takes a new degree of patience. Humbling to say the least :-)
    Anyone been there done that?

    [email protected]
    [email protected]
    …support phone number call +1 (877) 206-2092.
    Global Phone Support
    We have expanded English-language publisher phone support. To make contacting the iBookstore support even easier, new local phone numbers are now available for Australia, France, Germany, Italy, Netherlands, Spain, and the U.K. Support is available Monday to Friday, from 7 a.m. to 5 p.m. (PT).
    Country
    Phone Number
    Australia
    1300 307 504
    Note that this is a low tariff number.
    France
    0805 540 117
    Germany
    0800 664 5307
    Italy
    800 915 902
    Netherlands
    0800 0201 578
    Spain
    900 812 687
    U.K.
    0800 975 0615
    U.S.
    +1 (877) 206-2092
    Toll-free from U.S. and Canada.

Maybe you are looking for