IDVD disk reading problem on MacBook Pro

When I burn a movie using iDVD v.7.0.3, I'm not able to play it on my MacBook Pro. When I burn the same movie on another machine using iDVD v.6.0.4, I can play it on the MacBook Pro with no problem. Please advise.
Thanks, Greg

Hi
The origin to this is most often.
A - Burn speed so high that there are to many write errors. Set it down in iDVD pref.
I use x1.
B - Use of cheap DVD - most often the origin - to little organic dye in them.
I use only Verbatim DVD-R disks (no +R or +/-RW)
C - Less than 5Gb free space on internal boot hard disk. Other external hard disks
doesn't count at all. iDVD can only use the boot disk for it's scratch files.
I secure a minimum of 25Gb free when readdy to burn (SD 4x3 video, 16x9 HD I guess
needs about 5 times more)
D - The DVD-burner needs to be cleaned from time to time.
I use a Cleaning DVD disk to do this.
Yours Bengt W

Similar Messages

Disk space problems on Macbook Pro

Hi
I have started getting messages that the startup disk is full and that I should delete files etc. I have deleted some photos, emptied i photo trash and the regular trash. This has got me back to 694 MB available on the HDD. When I loom at the HDD and list the properties by file size, it says that i photo is using 111.9 GB.
When I open i photo and click on events or photo's, it says that it has 8953 photo's and is using 36.3Gb of space. I shoot in Raw, so my average file size is around 25MB. I don't understand why it is giving this different figure. Any ideas how I can free off some significant space?
I upgraded to Snow Leopard 10.6.3 this week to work with my new GoPro camera software, could this have any bearing on things? I have attempted to download some video to Cineform studio to edit some clips, but due to the lack of space it obviously wouldn't have it.
Any advice gratefully received. Thanks.

"...This has got me back to 694 MB available on the HDD...."
You should try to have at least 15% free hard drive space. 694 MB is what percent of your total hard drive capacity?

Problems reformatting MacBook Pro recovery disk missing

Hacing problems reformatting MacBook pro. Tried startup with option key but recovery disk option missing. Then tried the Mac os x disc that came with the MacBook Pro however when I get to the selection of where I want to install no HD option appears. Start up disk also appears to be missing. Can only start Mac in safe mode.

Remind them at this time you don't desire a service account, just desire a disc. The only reason you would want an account is if you wanted them to help you with actual troubleshooting.

Problem description: (MacBook Pro 15" late 2008, OSX Yosemite 10.10.2 installed, no pending updates) computer is running very slow - takes 2-3 minutes to open apps such as Pages, even when no other apps are open. Randomly freezes and becomes unrespo

Problem description:
(MacBook Pro 15” late 2008, OSX Yosemite 10.10.2 installed, no pending updates) computer is running very slow - takes 2-3 minutes to open apps such as Pages, even when no other apps are open. Randomly freezes and becomes unresponsive, requiring forced power down. Randomly logs off. Removed Kodak AIO software via Clean My Mac2, but BonjourAgent still there and requesting access. Cleaned weekly with Clean My Mac2 and running Sophos AntiVirus. 2GB memory installed. Currently 169.99 GB available of 249.2 GB capacity.
Help?
EtreCheck version: 2.1.8 (121)
Report generated March 21, 2015 at 11:35:35 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (15-inch, Late 2008) (Technical Specifications)
    MacBook Pro - model: MacBookPro5,1
    1 2.4 GHz Intel Core 2 Duo CPU: 2-core
    2 GB RAM Upgradeable
        BANK 0/DIMM0
            1 GB DDR3 1067 MHz ok
        BANK 0/DIMM1
            1 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 59
Video Information: ℹ️
    NVIDIA GeForce 9400M - VRAM: 256 MB
        Color LCD 1440 x 900
    NVIDIA GeForce 9600M GT - VRAM: 256 MB
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 0:13:37
Disk Information: ℹ️
    Hitachi HTS543225L9SA02 disk0 : (250.06 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 249.20 GB (168.91 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    HL-DT-ST DVDRW GS21N
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple, Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Extensions
    [not loaded]    com.leapfrog.driver.LfConnectDriver (1.11.1 - SDK 10.10) [Click for support]
    [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
    [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.leapfrog.codeless.kext (2) [Click for support]
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.kodak.BonjourAgent.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.sophos.uiserver.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.leapfrog.connect.authdaemon.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.sophos.common.servicemanager.plist [Click for support]
User Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
User Login Items: ℹ️
    Dropbox    Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
    AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
    AmazonMP3DownloaderPlugin1017265: Version: AmazonMP3DownloaderPlugin 1.0.17 [Click for support]
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
    AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.94 [Click for support]
    Google Earth Web Plug-in: Version: 6.0 [Click for support]
Safari Extensions: ℹ️
    AdBlock
    Disconnect
    Add To Amazon Wish List
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Java [Click for support]
    Tuxera NTFS [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 249.20 GB Disk used: 80.29 GB
    Destinations:
        Backup [Local]
        Total size: 63.67 GB
        Total number of backups: 1
        Oldest backup: 2015-02-23 16:16:08 +0000
        Last backup: 2015-02-23 16:16:08 +0000
        Size of backup disk: Too small
            Backup size 63.67 GB < (Disk used 80.29 GB X 3)
Top Processes by CPU: ℹ️
         5%    WindowServer
         1%    loginwindow
         0%    AppleSpell
         0%    SophosUIServer
         0%    SophosAntiVirus
Top Processes by Memory: ℹ️
    118 MB    InterCheck
    101 MB    SophosScanD
    60 MB    Dropbox
    54 MB    mds_stores
    41 MB    SophosAntiVirus
Virtual Memory Information: ℹ️
    49 MB    Free RAM
    682 MB    Active RAM
    652 MB    Inactive RAM
    315 MB    Wired RAM
    1.49 GB    Page-ins
    2 MB    Page-outs
Diagnostics Information: ℹ️
    Mar 21, 2015, 11:18:52 AM    Self test - passed
    Mar 21, 2015, 10:53:03 AM    /Library/Logs/DiagnosticReports/SophosUIServer_2015-03-21-105303_[redacted].cra sh
    Mar 19, 2015, 07:59:03 PM    /Library/Logs/DiagnosticReports/CalNCService_2015-03-19-195903_[redacted].crash

Linc Davis wrote:
Slow performance after installing Yosemite on an older Mac is often caused by inadequate memory. Although you can install the upgrade on a Mac with 2 GB of memory, experience has shown that at least 4 GB is needed for full performance.
Select About This Mac from the Apple menu. If you have less than 4 GB of memory, and your model has upgradable memory, install as much as it can take, or at least that much. Any reputable RAM vendor will have a web form in which you can select the Mac model and be directed to compatible parts.
Memory in the MacBook Air is not upgradable. If that's what you have, you should restore the previous system from a backup, or replace the machine. Ask if you need guidance.
The Etrecheck report clearly shows that SylvieRose has a Macbook Pro, not a Macbook Air and that there are only 2 GB RAM installed. The Etrecheck report can be very informative if one takes the time to examine it.
Ciao.

Installing Photoshop CS4 from original Disk onto my new Macbook Pro. Serial number accepted but now asks for the serial number of a previous version e.g. CS3 which I no longer keep. How do I resolve ?

Installing Photoshop CS4 from original Disk onto my new Macbook Pro. Serial number accepted but now asks for the serial number of a previous version e.g. CS3 which I no longer keep. How do I resolve ?

Tina Hadley did you migrate/transfer your applications over to your new Macintosh? If so this could cause problems with your serial number being recognized. Please run the available uninstallers located in Applications/Utilities/Adobe Installers folder. Once this is done you will also want to run the CC Cleaner Tool. Details on the use of the CC Cleaner Tool can be found at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

How can i clean up my disk space on my MacBook Pro

how can i clean up my disk space on my MacBook Pro something like a disk cleanup on a pc?

Those things you did on your PC you need not worry about on your Mac. Most is done behind the scenes.
Kappy's Personal Suggestions About OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.)
If you are using a pre-Leopard version of OS X, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. (These utilities have limited or no functionality with Snow Leopard, Lion, or Mountain Lion and should not be installed.)
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. (There is no confirmation that this version also works with Lion or later.)
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner.
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Always have a current backup before performing any system updates or upgrades.
Additional suggestions will be found in:
      1. Mac Maintenance Quick Assist,
      2. Mac OS X speed FAQ,
      3. Speeding up Macs,
      4. Macintosh OS X Routine Maintenance,
      5. Essential Mac Maintenance: Get set up,
      6. Essential Mac Maintenance: Rev up your routines,
      7. Maintaining OS X,
      8. Five Mac maintenance myths,
      9. How to Speed up Macs, and
    10. Myths of required versus not required maintenance for Mac OS X.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity or 20 GBs, whichever is greater, as free space.

Time Machine couldn't complete the backup to "Time Capsule. The backup disk image /Volumes/Data/MacBook Pro.sparsebundle could not be created (error 60)"

We are Mountain Lion using Time Machine to backup to Time Capsule. When the backup tries to run, an error appears after a couple of minutes saying "The disk you inserted was not readable by this computer." Then an error shows up saying "Time Machine couldn't complete the backup to "Time Capsule.The backup disk image /Volumes/Data/MacBook Pro.sparsebundle could not be created (error 60)"
I low level reformatted the Time Capsule and that didn't fix it. I then tried using Time Machine on another computer to back up to that same Time Capsule and it worked- so I'm doubting it's the Time Capsule.
I've noticed that when Time Machine runs, that a folder called Data at /Volumes/ appears while Time Machine is trying to back up. I think it's making the sparsebundle to transfer to the Time Capsule.
However, after a couple of minutes- it comes back saying that the disk is unreadable.
I think it's something wrong with either creating the sparsebundle or opening the disk image that seems to be a part of the Time Machine backup process on the local drive.
I am able to create a disk image with Disk Utilitiy without any problem on that system. I've repaired the disk and disk permissions with Disk Utility and replaced the directory with Disk Warrior. I've trashed what preference files I could find and restarted. I've completely removed the backup destination from the computer and added it back again.
Help!
Thanks,
Neil

neillhowell wrote:
I've noticed that when Time Machine runs, that a folder called Data at /Volumes/ appears while Time Machine is trying to back up. I think it's making the sparsebundle to transfer to the Time Capsule.
Yes, exactly. It makes one sparse bundle per Mac.
It's possible the TC's disk is too full for a new sparse bundle, or there may be some other problem.
Via the Finder, locate the existing sparse bundle (see the pink box in Time Machine - Frequently Asked Question #17 if you're not sure how to do that). See how large it is (plus how large anything else that may be there). If the total is very near the size of the TC, that may be the problem.
If not, a clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate the backup in question (probably the first one displayed), then copy and post all the messages here.

I have a problem with macbook pro OS 10.5.8 and cannot play youtube anymore, before Yes

i have a problem with macbook pro mac os 10.5.8 and cannot play youtube but before ther is no problem abou this. now there is warning sign to install adobe flash player, but when i install adobe it said cannot be compatible, and I went to the apple store, they sid need to upgrade the system to mac IOS 10.6 and i dont want to spend much... somebody to help me this

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
This, Adobe Flash Player 12.0.0.70, is the current version of Flash. It should work with Snow Leopard or later.

The image of backup disk "/Volumes/Data-1/MacBook Pro di Marco .sparsebundle" is used already. And I can't access to my time machine... :(

Hi, today my time capsule has restarted a new backup, I don't know why, and also it has appeared this message: The image of backup disk “/Volumes/Data-1/MacBook Pro di Marco .sparsebundle” is used already. And I can't access to my time machine...
Does anybody know what I've to do?
Tnx!

Yes, please check out this Pondini article for further details on how to solve this problem.

Can't use Install Disk to repair my MacBook Pro HD

Hi,
I ran the Mac Disk Utility on my MacBook Pro's HD and I got this screen:
http://i99.photobucket.com/albums/l320/brunotapia/help.gif
[IMG]http://i99.photobucket.com/albums/l320/brunotapia/help.gif[/IMG]
So I inserted the install disk so that I could boot up from the CD and run disk utility to repair my HD.
But the MacBook Pro keeps spitting out the disk. It reads other disks fine and this install disk reads on my friends computer so I know that both the MacBook Pro drive and the install disk are ok. So what could be causing my problem?
I have also tried to boot the computer from the disc holding the "C" key down, but the computer spits out the disk and boots up from the HD.
How can I repair the HD if I can't get the OS to boot from the install disk? What else can I do? Can I boot from another HD or Thumb drive? How about an iPod?
Any information would be greatly appreciated.
Bruno

Are you using the OS X Installer Disc One that came with your computer? To startup from the installer disc first insert the disc in the optical drive (label side up.) If the computer does not allow the disc to mount on the Desktop then either your optical drive is bad or the installer disc is damaged or is not a valid installer disc for your model.
If the disc mounts on the Desktop then restart the computer and after the chime press and hold down the "C" key until the spinning gear appears beneath the dark gray Apple logo.
If this still doesn't work then boot the computer into single-user mode by restarting and after the chime press and hold down the COMMAND-S keys until the computer starts up to a black screen with white print. At the prompt enter or paste in the following:
/sbin/fsck -yf
Press return and wait. If you receive a message that the drive required repairs, then re-run the above command line until you receive a message that says the filesystem is OK. If you have to repeat the command more than seven times without receiving a filesystem OK message, then that means the drive cannot be repaired by fsck. If you have a utility such as Disk Warrior 4.0 or TechTool Pro 4.5.2 then you can boot from their CDs and attempt to repair the drive. If either or both fail then the drive will need to be reformatted.
I highly recommend backing up.
Yes, you can boot from any external drive provided it has a bootable copy of OS X installed on it. If you have a second Mac with Firewire ports then you can connect it to the MBP via a Firewire cable. Boot the MBP into Target Disk Mode and the other computer normally. The MBP's hard drive should appear on the other computer's Desktop. You can then repair the drive using Disk Utility or other disk repair utility.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Having problems connecting MacBook Pro 2010 TO vizio 60 " tv

having problems connecting MacBook Pro 2010 TO vizio 60 " tv using mini displayport to VGA adapter
non support warning appears pn tv monitor

However, I still don't get a view of anything on the desktop except for the standard Apple swirl.
Can you drag windows to the other display?
In the "Arrangement" tab of "Displays" system preference, you can drag the display pictures to match the actual arrangement, drag the menu bar to the other display, or enable mirroring.

What is the problem on MacBook Pro retina 15"?

I just bought a new MacBook Pro retina 15". After unboxing, I turned it on and there was no any problem. But the second time I turned it on and charge battery, I got 2 problems, 1. The machine made noise loudly and 2. The charging is not working. What is the problem on MacBook Pro retina 15"? However, after about 1 hour, it works normally. Should I still use it or sell it before it has more issues?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Scrolling through PDF files is slow using Adobe Reader on MY MACBOOK pro with retina

Scrolling through PDF file using Adobe reader on my MACBOOK pro is very slow and stuters. That is even for small files. MAC preview and Adobe pro do not have this issue. It is only Adobe ready.
Please advice.

Summarizing the problem specifics and versions for future readers:
There are two separate "slow scrolling" bugs in recent versions of Adobe Reader on Mac OS X. Symptoms: scrolling by mouse or fn + down arrow is very sluggish and laggy. It is not isolated to large or graphically complex documents. This 2 megabyte PDF shows illustrates the problem: http://www.hq.nasa.gov/alsj/nasa-tnd-6846pt.1.pdf
Problem 1: Adobe plug-in for Safari causes slow scrolling when viewing PDF documents within Safari. Solution: remove Adobe plugins from Mac HD/Library/Internet Plug-ins/AdobePDFViewer.plugin. I also deleted AdobePDFViewerNPAPI.plugin. This will cause PDF display within Safari to revert to the built-in Apple PDF renderer, which is very fast. These files will be re-installed anytime you install or upgrade Adobe Reader.
Problem 2: Stand-alone Adobe Reader scrolling is slow starting with version 11.0.01. Version 10.1.4 and earlier are not slow. User CF McBlob did not experience this slowdown, but was also running Acrobat 10.1.7, which might have libraries which prevented the problem. I'll do further testing when possible to try and isolate more details.
Platform specifics: OS X 10.8.4, late 2012 iMac 27", i7 3.4Ghz, 16GB RAM, 3TB Fusion drive, GPU = GTX675MX, 1GB

HT1218 How do I troubleshoot this: Time Capsule cannot complete the backup. The backup disk image "/Volumes/Data/ MacBook Pro.sparsebundle" is already in use.

This is the second time I've encountered this issue with Time Capsule using Time Machine automatic backup. I haven't found the following specific error message in the list of troubleshooting issues: "Time Capsule cannot complete the backup. The backup disk image “/Volumes/Data/MacBook Pro.sparsebundle” is already in use."
I'm not certain what causes this issue. I think it may have something to do with having to force shutdown with apps still open when the beachball hangs and the MacBook has to be rebooted.
Has anyone else dealt with this issue?

Welcome to Apple Support Communities
Restart your Mac and the Time Capsule. In most of the cases, this should solve the problem.
If it doesn't work, see > http://pondini.org/TM/C12.html

Hello, I have a problem, my macbook pro runs slowly when unplugged but if I plugged it, it runs perfectly.

Hello, I have a problem, my macbook pro runs slowly when unplugged but if I plugged it, it runs perfectly.

The battery needs to be replaced, or there is some other hardware problem.

IDVD disk reading problem on MacBook Pro

Similar Messages

Maybe you are looking for