IDVD does not advance slides in preview

I created a slideshow in iDVD on my PowerMac. When
imported into my new MacBook Pro, the slides appear
fine in editing mode, but when previewed, the slides
do not advance, though the audio track plays. Any
suggestions would be much appreciated.
Do you mean you created an iDVD project, an iDVD project archieve, a disk image, or burned a DVD using your PowerMac?
Really, the ONLY way to move an iDVD project from one computer to another is via the iDVD archieve project method. Both computers should have the same version of iDVD. The reason? Only the iDVD project archive contains all the 'raw' elements that went into, and are necessary to recreate, the project.

Similar Messages

Submit button in Cap 7 quiz does not advance learner to next quiz slide

I created a 5 question MC quiz in Cap 7. When I take the quiz in the preview mode, I am able to advance to the next slide by clicking on the submit button. Well, when I click on the submit button, a pop up appears that says: Correct - click anywhere or press 'y' to continue. Once I click anywhere, *then* I am taken to the next question.
However, when I take the quiz in a web browser, I cannot advance to the next slide, even when I answer the question correctly. I click the submit button. The same pop up appears as in the preview mode: Correct - click anywhere or press 'y' to continue. So, I click anywhere but nothing happens. The slide does not advance.
I've created a few quizzes before in Cap 7 using the same settings so I was stumped when the quiz didn't work this time. Maybe I accidentally changed a setting??

The jump to slide works great. Yes, the user goes right back to the quiz after remediation. The user can then change her answer and click submit. However, she can not advance forward. Sigh.
I am a freelancer who inherited the template from the former freelancer. I was told to use her template to create the trainings. So I am. I was supposed to use all the settings she used, too. That's why the Required is set to: User must answer every question'
I can try your idea and the Requirements in the settings.
What's odd, though, is that I've developed a Quiz using these same exact settings and it worked perfectly. That's why it's odd that the Quiz is no longer working correctly.
Okay, let me try to change the Required settings.
By the way, the submit button works fine in the Preview mode, just not the Web Browser mode.

Project does not advance after taking quiz.

After taking a 3 question quiz I set the project to jump to a specific page when the Continue button is pressed. The project does not advance to the chosen slide.

I'm having the same issue. The project (swf file) keeps freezing on the second quiz question. if i start the project on another slide, it still freezes on the second question slide presented.
I have cleared the cashe, tried setting it to a survey question. tried rebuilding the question slide.
I have no clue why it wont play thru.
Any suggestions? I need to get this project published today.
There are 6 quiz questions in the project total.
Thanks,
Stephanie

My iMovie & iDVD does not work properly at all.

When I try to share a movie in iMovie, it says "Unable to prepare project for publishing". As well as "The project could not be prepared for publishing because an error occurred. (Error in user parameter list)". Also, it wont import any videos no matter what the format is. I have uninstalled the program & re-installed it but nothing seems to work.
iDVD does not let me create a project and edit it. It also does not let me create a DVD.
I have an '07 Macbook w/ Snow Leopard operating system and I have run out of ideas as to why these 2 programs are not working for me.
Please help!!!

First try Resetting it: Hold down the home and sleep button, ignore the red OFF slider, wait for the Apple logo then let go.
If that does not work, Restore your iPhone in iTunes from your backup.
If that still does not fix it, Restore your iPhone and a new phone (not from backup) and see how it works. If it is doing fine you have a app you are using that is probably causing your problem. Load them one and a time until the problems recur and you will have found the one that is a problem.

IDVD does not start

With the launching of iDVD6, the loading of the topics the programe stop.
I am obliged to force to leave (iDVD does not answer any more)
Have you a sollution
Thank you and excuse me for the bad language I am French

Hi N
iDVD takes a while to start up.
How do you know that iDVD doesn't answer any more ? Using activity monitor ?
Well Activity monitor isn't to rely on in all circumstances. When rendering in
iMovie and coding in iDVD it indicates that either of them is not answering but
they are running as normal as ever. Just wait.
If iDVD doesn't start up the most common origin is that the user has installed
new programs but not run "repair permissions" with Apple Util tool.
As no:2 I would locate iDVD pref file and move it to desktop Then restart iDVD.
Still not working: I would start a new account, logg-out of this-one and into
the new one (it forces Mac OS to create several new pref files).
Now it should run.
What Mac are You using, processor, speed, RAM, free space on hard disk,
Mac OS version, iDVD version and QT version ?
Yours Bengt W

Idvd does not burn dvd

idvd does not burn project to dvd

You're going to give us a lot more information that that.
What version of iDVD do you have?
What happens when you try to burn the iDVD project?
Any messages or warnings?
What type of content do you have, i.e. movies, photos for slideshows?
What brand of DVD disk are your using?
If you get to the point of starting a burn what speed do you select.
OT

My iDVD does not burn the movie. It ejects DVD before finishing burning.

My iDVD does not burn movie on DVD. It ejects the the DVD before the burning is finished! Does anyone know what the problem is?

Try cleaning the Superdrive and performing a SMC reset:
Resetting the SMC (System Management Controller) on Intel-based Macs:
http://support.apple.com/kb/ht3964 and
http://support.apple.com/kb/HT1237?viewlocale=en_US
Resetting your Mac's PRAM and NVRAM:
http://support.apple.com/kb/ht1379
If you are using a Wireless Keyboard:
http://support.apple.com/kb/TS3273
Then reboot your Mac and try again.

In the Program Panel, when I click the Spacebar (i.e., "Play"), the image does not advance.

In the Program Panel, when I click the Spacebar (i.e., "Play"), the image does not advance. When I click "Play" again (i.e., "Stop"), the still image confirms that we have moved on. Please, What must I do so that when I click the Spacebar (i.e., "Play"), the image does indeed advance? Thanks!

This pertains to Adobe Premiere Pro CS6:
Thanks for your prompt reply. This is my first post and I appreciate your patience. I imported media into the Project Panel. From there, I placed a few clips into a sequence in the Timeline. In the Timeline, I clicked on a clip. I then double clicked in Program Panel, and could then see the clip. However, when I click on the space bar, (i.e., "Play") in the Program Panel, the image in that panel does not advance. When I click "Play" again (i.e., "Stop"), the still image confirms that we have moved on a bit in the footage. (The audio plays normally, confirming that we are advancing in time. )
I want to be able to press the space bar in the Program Panel and to see the "motion picture" in the Program Panel.
Please, What must I do so that when I click the Spacebar (i.e., "Play") in the Program Panel, the image does indeed advance? Thanks!
Not sure I yet have the capabibility of providing a URL of the problem.
Thanks for your guidance,
David

I changed my browser fill and the update does not show in the preview mode

I changed my browser fill and the update does not show in the preview mode. I saved and restarted muse but the problem is still there. Any thing else I can do? Could it be something that changed in the file?

Hello,
What did you put in the "browser fill" area, an image or a color? WIth gradient or with solid color? Also, does it show fine if you "Preview in Browser"?
Screenshots showing the Browser fill section (like this: http://screencast.com/t/RHqdVPP4) and the display in Preview mode would also be helpful.
Cheers
Parikshit

Setting it up so that after a song finishes it does not advance to next????

I have many files that I need to play, though I want it setup so that after a song is done playing it does not advance to the next track. Is there anyway to do this? The only way I have found to do this is by making each and every song a separate playlist, however this will take a LONG time.
Thanks.

So if I create a playlist with songs that I want to play and place tracks in between each song and uncheck the ones that are in between, will it play the song that I want to play and stop when it gets to the unchecked song and then wait until I skip to the next song that is checked to play?
No. iTunes doesn't stop when it reaches an unchecked song, it skips over it. So in your scenario it will skip over the unchecked song, go to the next checked song and play that. If you want to play one song and then stop, uncheck all the songs. Then there are no other songs for iTunes to play next and it will stop after playing the one you specifically selected.

Imovie (and idvd) does not seem to read my mpeg files ?

imovie and idvd does not seem to read my collection of mpeg movies. Do they need to be converted to some other format ?

Welcome to the  Discussion Forums.
Mpeg1 and 2 files will need converting (Mpegstreamclip can do this - QT mpeg2 playback component required for mpeg2)
Mpeg 4 files will generally be OK but some may need converting.

After the trial period I bought when starting an application, but does not advance. As I can activate it?

After the trial period I bought when starting an application, but does not advance. As I can activate it?

Hi,
Do you get any error while activating Muse, or could you please provide some more details.

IDVD will not burn DVD or preview

I made a DVD in IDVD and burned a DVD last week. I went back into IDVD to replace some photos and movies and when I tried to burn another DVD, the wheel spins and the progress screen comes up but does not progress or burn. I tried different DVDs but same result.
When I am in IDVD, I am also unable to preview the DVD project. I can open up the individual folders and see the photos & movies but when I go to preview it, nothing happens. Is the problem with IDVD? I have 5.01.
Thanks
G4/Dual 867. 768MB RAM/40 GB HD. 10.3.9

BD3188,
Welcome to the iDVD forum....
Try these steps first:
delete the iDVD plist file "com.apple.iDVD.plist"
repair disk permissions with disk utility
make sure you have 15-20GB of free space on your startup drive
try again....
john

Color does not match printing in preview

Printing a photo directly from iPhoto ('08) does not match the color on screen. Using an Epson 2200.
The colors are dark and saturated. Maybe the problem is setting color management in the advanced dialog box- I have it set to: "No Color Adjustment" as per Epson.
Is there a setting that is recommended? I can't find any help in help.
I'm well aware of color management problems printing via Photoshop with the Epson printer.

Hi McJPP,
You're using one of the built in color setups for Photoshop, so no big deal there. Since you have your monitor properly calibrated and profiled, ColorSync shouldn't be having an issue handling the difference between the image's color space and your monitor's. Questions though. Is the image RGB? Does it have an embedded profile? If so, is it Adobe RGB 1998? I'm assuming that it does since that's your working RGB color space in Photoshop.
The grab on the left is the preview copy using:
By preview, do you mean the Preview button on the print dialogue box at the bottom left next the the PDF button? I'm guessing yes since I can produce the same kind of result. It's a bit hard to explain, but I'll try.
I took a simple grayscale image and made it RGB. I then did the same thing you did. Left image is Photoshop handling color for an Epson Stylus Pro 4000, using a profile I made for a DuPont paper. Then clicking the Preview button when the print dialogue comes up. Right image is letting the printer handle color and clicking Preview. The result is below.
Believe it or not, there's nothing wrong. Photoshop (more accurately, ColorSync) is showing you what it had to do to the pixel color values to adjust for how the inks perform on the chosen paper. The end result, with proper profiles, is that the printed image looks like what you see in Photoshop regardless of how it shows in Preview mode. The Epson driver doesn't make this visible cue even though you've turned ColorSync on there, so it simply shows you the same thing you see in Photoshop, even though it's making the same adjustment to the pixel color values.
You should get essentially the same final output no matter which way you print the image.

IDVD does not recognize chapters

Using iDVD '08 (7.0.2) on OS X 10.5.4, iMac 24" 2.8GHz C2D.
I created a video using FCP 5.1.4 and exported to QT Movie. I did not "Make Movie Self-Contained." I did select "All Markers" to be exported (I made sure to also create the <CHAPTER> tag for each marker). When I view the resulting movie in QT Player, I can see the chapter markers (there are two). However, when importing into iDVD, no chapter submenus are created (I am using the "Forever" theme), and pressing the chapter forward/back buttons in the preview player just take me to the end/beginning of the video, respectively.
Any idea what is wrong here, and how I can get a chapter submenu to be created? Thanks for any assistance.

Final Cut Studio: "All Markers" option does not include DVD Chapter Markers at http://support.apple.com/kb/TS1233 says it all "When you export a QuickTime movie from Final Cut Pro, choosing the "All Markers" option does not include chapter markers that will function in DVD Studio Pro or iDVD."
When having problems, checking the Apple Knowledge Base is always the best first step.

IDVD does not advance slides in preview

Similar Messages

Maybe you are looking for