IDVD does not recognize chapters

Using iDVD '08 (7.0.2) on OS X 10.5.4, iMac 24" 2.8GHz C2D.
I created a video using FCP 5.1.4 and exported to QT Movie. I did not "Make Movie Self-Contained." I did select "All Markers" to be exported (I made sure to also create the <CHAPTER> tag for each marker). When I view the resulting movie in QT Player, I can see the chapter markers (there are two). However, when importing into iDVD, no chapter submenus are created (I am using the "Forever" theme), and pressing the chapter forward/back buttons in the preview player just take me to the end/beginning of the video, respectively.
Any idea what is wrong here, and how I can get a chapter submenu to be created? Thanks for any assistance.

Final Cut Studio: "All Markers" option does not include DVD Chapter Markers at http://support.apple.com/kb/TS1233 says it all "When you export a QuickTime movie from Final Cut Pro, choosing the "All Markers" option does not include chapter markers that will function in DVD Studio Pro or iDVD."
When having problems, checking the Apple Knowledge Base is always the best first step.

Similar Messages

Idvd does not recognize superdrive

i have a macbook pro 15" and it has a superdrive, but just now when i opened idvd to burn a dvd an error message popped up saying that "this machine does not have a superdrive so i will not be able to burn a dvd?" then i quit idvd and opened it again and was able to burn the dvd. does any one know what happened? or what caused that. i just received my computer back today from a repair that was done concerning the screen and the computer freezing. but now im paranoid that its not recognizing the superdrive.

"this machine does not have a superdrive so i will not be able to burn a dvd?"
Don't be paranoid. It's actually normal. When Apple Certified Techs open or go into the guts of your laptop and open up the machine completely, they often test items as a whole and also individually which means they need to disconnect various items and then put them back the way they were.
If you got this error message when you opened iDVD, it's very possible they had to remove a component or perhaps the S-Drive and put it back in when they were done. If they did this while the system was powered up, then next time the app is opened it will remember it didn't have the drive at that particular time. So next time it's powerd up one would get a message saying there is no S-Drive. If you see the message again, then I'd be concerned. That would indicate the device was not properly reinstalled and may have a loose connection.
SDMacuser

IDVD does not recognise chapters added in Quicktime Pro

I bought Quicktime Pro in order to add chapters to my DV file, using the instructions provided by Apple.
When I then inport this file in iDVD 08, the chapters are not recognised, and no submenu is created. When previewing the file in iDVD however, the chapters do appear. How can I get it to recognise the chapters and create the submenu? I don't want to have to buy additional software if possible.
Thanks,

Ziatron,
Thank you for that information. I agree about having the chapter markers. I'm desperately trying to figure out a way to do it without trashing all the work I've done so far.
I read in the discussion/support groups that when moving an iMovie 06 project to iDVD 08, you lose titles, still images and music. Is that true in your experience? If so -- I would essentially lose all my work since I make movies out of still photos with only a few video clips imposed here and there.
I've also read that you can put chapters in by exporting the iMovie08 project to Garbage Band. But -- then I read that you can lose your audio and that quality is severely impacted in iDVD using this approach.
If I use iMovie06, it appears that I will have to recreate my entire project, since it won't recognize my iMovie08 project (at least as far as I've been able to figure out). I've spent literally days and nights on it - selecting out of thousands of photos, doing Ken Burns effects, selecting music, etc.
I might test a small movie using iMovie HD 06 to see how it goes with photos -- and will use it in the future if that works.
I've spent the morning trying to find answers to the problem with the Scene Selection option in iDVD08. I just can't figure out why it's not working! It's great on the computer preview, but just doesn't work when burned or through disk image tests. Each time I burn (disk or image) it takes three hours -- so way frustrating.

Ibook does not recognize blank DVD - profiler looks suspicious

I have an ibook g4 1.42GHz running OS 10.4.11 purchased used about 10 months ago.
All of the literature says it should have a SuperDrive which should be able to burn DVD (SuperDrive DVD±RW/CD-RW). However I cannot get it to recognize a blank DVD. Plus iDVD brings up a message saying "your macintosh does not have a supported Superdrive...you will not be able to burn a dvd"
Doing some digging, the System Profiler looks like it thinks i shouldn't be able to either:
MATSHITA CD-RW CW-8124:
Firmware Revision: DB0D
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
Burn Underrun Protection CD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw
Media: No
Says nothing about being able to burn dvd?
I am not aware that this model ever came NOT able to burn dvd. The only explanation i see is that the person i bought it from may have had it refurbished for some reason and they put in the wrong optical drive? Is that possible?
Or does anyone have any other explanation or fix?

Hi
What you mean exactly? Does the drive does not recognize content on the media or there is problem if you want to burn data on DVD-R media?
Can you please explain all this a little bit more preciously?
Just for info: I use TDK empty medias almost 5 years and I can say that TDK is very good manufacturer for this stuff.

After downloading lion does not recognize blank discs or dvd´s cannot burn anything

I downloaded Lion and now my mac does not recognize any blank cd or dvd and I cannot burn anything, not with Toast 10, or with iDvd still not recognized. Can someone help me??

Hello
I have been trying to fix a similar issue on my wife's PowerBookG4. I cannot pin point when it started, but she noticed it a couple weeks ago when she tried burning a disc. We have come to discover that her drive will no longer mount any discs at all (blank or otherwise burned discs or software). If I had to make a guess it had to have started in the last month or so after some recent update. Maybe 10.5.2? I am not sure.
I am getting extremely frustrated with Apple though on this matter because I have been browsing multiple forums and seeing this exact issue over and over again and nobody seems to have a solution or correct diagnostic for it.
I have tried zapping PRAM, I have tried many types of discs, brands, etc. and nothing works. I know this is a Software issue, it has to be. There are a LOT of people reporting this issue. If necessary I will start linking to all the different posts that I found in the last few days.
Please post some help, ASAP. This has been a major inconvenience and I cannot believe that Apple hasn't discovered the problem with how many people have been reporting it.
Thanks

We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?

We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?

You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/

"Find my iPhone does not recognize New iPhone 5

I use my AppleID to "Find my iPhone" successfully on iPhone 4, iPhone4S, iPad, iMac. All show up. New iPhone5 iOS 6.0.2 uses same AppleID in the General iCloud settings, Contacts,email,photostream,safari bookmarks,reminders,notes, are all synced fine. I can even see how much storage is available in my iCloud account on the new iPhone5. The Problem is that "Find my iPhone" does not recognize the new iPhone 5. Yes location services is turned on. The iPhone5 can find its location in the map app, can find all other devices in "Find my iPhone" just not itself in "Find my iPhone" I tried a hard reset.
ANY IDEAS?

How about when the passcode is correct but not recognized?
I was prompted to enter a password to unlock the device when I downloaded IOS 7 several months ago.
Entered the password every single day for months, never a problem.
Yesterday I attempted to download the most recent IOS version and I was asked for a passcode before I could do that (my phone was unlocked). Online I found out the passcode is the unlocking password. It did not work and I was unable to use the phone for several minutes after 5 attempts. I just stored the phone and when home I charged it overnight.
This morning I unlocked the phone as usual and used it without a problem for emails, phone calls. etc.. Now, after not having used it for a while, I am asked for the passcode to unlock it as usual, and although I am sure I entered the right code, it is not recognized. I am unable to unlock my phone, although I have done it for months.
This is not a case of forgotten passcode! And I see it has happened to many others that use 4s and 5s iphones.
i could attempt the iTune connection fix, but it troubles me that all solutions are presented for forgotten pascodes, and in many cases actually the passcodes are not recognized. Which means, it will keep happening unless Apple offers a solution.

My computer does not recognize my printer

Dear Sir/Madam please can you help me my computer does not recognize my printer either by wireless or usb cable although I used to use it and it was good thanks ayman

Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.

PSE 10 does not recognize my printer

PSE does not recognize my printer.

Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.

My mac air does not recognize my printer.

My wife's mac recognizes our Epson Printer but mine will not. I have reset the printer settings and it does not recognizes any printers. Would love some help on this. Thanks.

My wife's mac recognizes our Epson Printer but mine will not. I have reset the printer settings and it does not recognizes any printers. Would love some help on this. Thanks.

My iPad does not recognize my printer (HP officejet 5510 All-in-One). What can I do?

My iPad does not recognize my printer (HP officejet 5510 All-in-One). What can I do?

The Photosmart 5510 is AirPrint capable. You can find that information linked below. There may be something in the network that is preventing communication. To use AirPrint your router needs to support Bonjour services. Run the download below. It will let you test Bonjour services from your Windows PC. If this app can't see the printer either, then the router's Bonjour services are off, or it does not support Bonjour. Let me know what the app finds. If it can't find the printer, let me know what brand and model router you have, and I'll see if it has Bonjour services at all.
Bonjour Print Services for Windows v2.0.2
HP Web Connected Printers and Supported Cloud Services
I am a printer tech for HP.

I got an iphone 4. I had to update my macbook pro to Lepard just to sync. I updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone.

I upgraded from Iphone 3g to iphone 4. I had to update my macbook pro to Lepard just to sync. the **** thing with the new iphone 4. I bought and updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone before it will sync! It says everything on the phone now will be cleared in order to sync it with my existing info on the computer from my previous iphone. How can I just get everything from my current iphone 4 into itunes, basically add it to the info from my previous iphone 3g that is currently in my itunes? I dont want to lose what I have on my phone currently....I paid money for half the apps for crying out loud.
I was so frustrated by this when I first bought the phone that I just pushed it out of my mind and NEVER synced it. Please help...

Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version. The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.

IMovie 6.0.3 does not recognize built in iSight Camera on new iMac

New iMac, Intel, OS 10.5.4, QT 7.5.
Built in Camera works with Photo Booth, the new iMovie 7.1.3 and iChat.
iMovie HD 6.0.3 or 6.0.4 does not recognize the camera. Opening a new project results in a No Camera Connected error. I have tried selecting various options in the video format drop down when creating a new project. I have repaired permissions, tried it under various users, removed the imovie plist, reinstalled imovie (both 6.0.3 and 6.0.4) without success. All 10 of the new computers are exhibiting this problem.
Any help would be appreciated.

That is not an option that I can select on the imac's. On my iBook under 10.5.4 with iMovie HD 6.0.3 or 6.0.4 I can click on the triangle next to the camera icon and select the built in iSight camera. On the new iMacs that does not work. The built in iSight is not listed as an option.

MSI x48c platinum does not recognize 2 PCIe boards

Hello,
I had the same recycling boot problem as others have noted.
It occured with the Antec Phantom 500 power supply and the Antec Signature 850.
Swtiched to a Cool Master Pro 650 and no more recyling boots.
However, I have 2 PCIe cards that this system board does not recognize in the POST (quick boot disabled) and no new hardware is found under win XP.
Boards are:
Black Magic Design Intensity (HDMI board)
http://www.blackmagic-design.com/products/intensity/techspecs/
United Audio UAD-2 Quad (audio DSP)
http://www.uaudio.com/products/uad/uad2neve128/index.html
Does not matter if they are together, alone or which PCIe slot.
These bpards are needed for my work.
anybody else have baords that the x48c can't see?
These same boards are fine with other motherboards.

i just remember i had once similar problem with a sata driver. the issue is this you can not adjust everything in bios in one go and expect mobo to know about it. what i mean is this for instance you disable the raid then you save it and exit and then when it reboot you go back to bios and reset another another parameter, you save and exit and on reboot you go back to bios and reset another parameter. i got round the prob that way and it worked and mobo saw the sata HDD. give this a shoot good luck and finally make sure raid is disabled
this is what i would do
1- make sure the jumper setting on your IDE Hdd is correct (Y may have to try this twice as there are two different setting on jumper setting for Master)
2- connect the sata HDD
3-click on power
4-go to bios and disable raid save exit
5-on reboot go back to bios
6--on first option click on it then you should see all devices that can be seen by mobo if you do not see sata HDD you have to click on enable for the auto to see the device once it sees the device save and exit. REMEMBER THE JUMPER SETTING ON IDE HDD CAN CAUSE PROB . SO try the other jumper setting for master, repeat this procedure once more hopefully you get it right

I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. Please help

I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. There's only a few things that could be my passcode, but because it disables for an hour, it is time consuming trying to figure it out. What do I do? I do not care about having to erase everything since it's new and there's nothing on it, but it was never synced with iTunes.

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

IDVD does not recognize chapters

Similar Messages

Maybe you are looking for