Idvd does not see video in movies folder

I copied video from my camera to imac using Image browser ex . I edited the footage and saved it in my movies folder . i started to create a dvd . Everything was fine until i wanted to add the video to the drop zone . I clicked on movies and nothing was there . I went to finder and the video was saved in movies and i could play it no problem . I went back to idvd and under file i imported  from the movies folder . Everything worked ok . Just wondering why I had to import when i thought if i clicked on movies in idvd and it would show
Thanks
Happy new Year everyone

How did You - Share to MediaBrowser ?
as MEDIUM ?
And when iMovie is closed and iDVD opened - It's not under Media button / Movies ?
So very strange !
I would
_ Create a new user account (Apple menu down to Preferenses/Accounts)
_ Log into this one and Create a small test movie
_ Share to MediaBrowser - and as MEDIUM
_ Close iMovie
_ Open iDVD and set up a project IN SAME frame-rate e.g. 29.97 fps/NTSC or 25 fps/PAL (same as it's material is recorded as and edited in iMovie)
_ NOW - under Media buton / Movies - is it still Lost ?
BTW - can You please explain - step by step what You mean/do by this
but since i used image browser ex to edit and save the movie
"image browser ex" - is this a specific program / application ?
Save the movie - How and into what folder and into WHAT - Video-Codec - one that iDVD can use or not ?
Yours Bengt W

Similar Messages

  • Aperture Does Not Import Videos using IMPORT FOLDER AS PROJECTS

    SOLVED - Aperture 3.2.1 does not import videos using "Import Folder as Project"
    After 2 days of trying to figure this out (actually around 2 hours total) I've finally managed to import all my photos & videos last year. 200 Gigs 54,000 files. First few tries resulted with referenced photos only, no videos. I had no luck with Google, even tried moving a couple of .plist as mentioned from this thread: https://discussions.apple.com/message/11188017?messageID=11188017#11188017 - this worked for some but not for me. Some issues were solved by NOT selecting "Raw Only", this will cause Aperture to skip your videos.
    Thank you to these people who took time to share. In return I am posting my micro contribution to the Aperture Community. FILE > SWITCH TO LIBRARY > then create a new library. You should be able to import your photos with videos in folders.
    I hope this gets into Google soon. :-)

    , I see only the file, where these photos are, not the photo names or thumbs inside the file (Aperture import path).
    You mean in the Aperture Import panel the folder, where the jpegs should be, is empty?
    Then you may have excluded jpegs from import in your "Import Settings".
    Check the above settings in the "Import Settings" options in the "Import Window". I.e-make sure the Raw+Jpeg Pairs option is set to "Both", even if you do not import raws.
    After reassembled all the programs to a new hard drive in Mac Pro
    Is this new Harddrive your system volume? And are the jpegs you wat to import located on this drive? Or are the on another external volume? If yes, how is this volume formatted?
    Have you checked the permissions and ownership of the jpegs?

  • Encoder 3.1 on Windows 7 64bit does not see video card

    hi
    any help or suggestions would be greatly appreciated;
    We are running Newtek's VT[5] on a windows machine and have been
    very successful running Flash Media Live Encoder 3.1, streaming Live
    to a server.
    Recently we were upgraded from XP and 32bit to Windows 7 and 64bit;
    Now the encoder does NOT see the video, although it recognizes both
    the VT video device and VT audio device. My understanding is that
    Flash Media Live Encoder 3.1 should run on the operating system
    and with Newtek VT[5] (even though the VT capture card is not on Adobe's
    official list)
    http://www.adobe.com/support/documentation/en/flashmediaencoder/FMLE_DeviceMatrix3.1.pdf
    Of course....Adobe wants me to purchase a contract for tier-2 support to answer
    the question of whether the encoder will work on our 'new' setup.
    again,
    any help or suggestions would be greatly appreciated;
    calvin tullos
    space telescope science institute
    [email protected]

    Are you sure that correct and latest device drivers are installed on that machine?
    Please check the video device settings. If FMLE is able to detect the device it should get the signal and work with that.

  • HT1390 I downloaded a movie but it does not appear in my movie folder

    I downloaded a movie from iTunes (confirmed that my account was charged for it) but it does not appear in my iTunes library.  (I have done this before - the movie automatically appeared in my Movies folder the last time.  This time, it did not.)

    Phil0124 wrote:
    Tap on this icon:
    All Downloaded movies and shows will appear there.
    Yes. I know where downloaded movies can be found. And the question has already been marked as solved.

  • IMovie "does not see" videos from my Canon Vixia HF M32 and shuts down. Any ideas?

    Lately, I have not been able to download videos as I used to from my Canon Vixia HF M32. My iMovie would not see the camera and would often close unexpectedly. It then gives an incomprehensible error message. I have no idea why this is happening or what to do. I was able to dowload some videos using a pc and a different software. Any clue?
    Thanks

    iMovie HD (version 5 and 6) works only with Firewire cameras, DV or HDV.
    Footage from other types of cameras can be converted for use. Try VoltaicHD and convert to Apple Intermediate Codec (1080i or 720p) for HD footage or DV for SD (Standard Definition) footage.
    If all you want to do is creating a DVD, go for SD footage in the DV format. A DVD is always SD.

  • N8 video editor does not see my songs/videos

    Hi
    after buying my n8 a month ago I started exploring the video editor and immediatly a problem appeared:  
    I open a new project to create a video and the video editor
    does show e some videos captured with the device, so I choose a video
     , trim it and so on, add some transitions and texts in between and 
    here the proble begins - I go to "choose a music for background" and the
    list of song availiablefor adding is empty, that means the N8 does not see
    any mp3/ogg/acc etc files which are supposed to be added to the video film i'm making=(
    However it is possible to make an audio record with the audio recorded and such file can be seen
    as a possible for background music in the video-editor.
    So, what can I do make N8 video-editor to see files from my music collection stored on the phone so that i could
    use my songs in y video-films created on MY N8?
    Solved!
    Go to Solution.

    the solution is found:
    if your videoeditor does not see your mp3 and video files and thus you cant create adn edit movies do this - place all your music files into Sound Clips foldr and not in the folder you usually like to store them in; place video files to your Video Clips  -> thus the video editor will see all the files.
    Happy **bleep** new year everyone...coz being on new year in a hospital is sucks=(

  • HT201269 itunes cannot see my iphone backup.  I have a backup of the backup on an external HD, but even tech support cannot figure this one out.  I copy and paste backups into the correct folder but itunes still does not see it.  All I need are my contact

    Sorry for short novel I am writing.  I just wanted to cover as much backround as possible.
    So, here it goes.  I backed up my iphone 4 after renting a movie.  The movie only played the starting credits before I was called on for daddy duty.  A few days later the movie would not play, so I restored my phone from my backup.  The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie.  I then had a problem with my contacts showing up twice in the contacts list after the restore.  So I attempted another restore.  All was well at this point.  I then started having trouble with my pc and decided to copy the internal drive to an external source.  A week later I had a system failure and did a factory restore on my computer.  I re-installed itunes and tried to copy and paste the old backup into the new itunes.  Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh).  Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck.  The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine).  We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive.  Ok, this is where it gets weird.  We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files.  Whoohoo, itunes now see's a backup folder full of old files, or so we thought.  The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders.  When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored).  This left tech support and I both scratching our heads.  My service issue was escalated to the next level.  I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through.  As usual, apple disappoints again.  I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s.  I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files.  Any ideas or support in retrieving my contacts would be greatly appreciated. 

    Sorry for short novel I am writing.  I just wanted to cover as much backround as possible.
    So, here it goes.  I backed up my iphone 4 after renting a movie.  The movie only played the starting credits before I was called on for daddy duty.  A few days later the movie would not play, so I restored my phone from my backup.  The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie.  I then had a problem with my contacts showing up twice in the contacts list after the restore.  So I attempted another restore.  All was well at this point.  I then started having trouble with my pc and decided to copy the internal drive to an external source.  A week later I had a system failure and did a factory restore on my computer.  I re-installed itunes and tried to copy and paste the old backup into the new itunes.  Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh).  Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck.  The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine).  We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive.  Ok, this is where it gets weird.  We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files.  Whoohoo, itunes now see's a backup folder full of old files, or so we thought.  The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders.  When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored).  This left tech support and I both scratching our heads.  My service issue was escalated to the next level.  I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through.  As usual, apple disappoints again.  I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s.  I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files.  Any ideas or support in retrieving my contacts would be greatly appreciated. 

  • HT201302 I have a large video on my ipad that I would like to transfer to a computer.  But my computer (using various software that came with Windows 7) does not see this video, although it sees all the other videos on my ipad.  This video is too big to t

    I have a large video on my ipad that I need to transfer to my PC (a window 7).  I could also use a windows 8 if that would help.  But all of the applications I have tried do not see this large video (52 mins) even though they transfer smaller videos fine.  The ipad will not let me trim the video, saying it is too large.  This is true even though I only want to trim the original, and not create a new video.  (Actually it refuses before it gets to the choice of creating something new or just eliminating something from the original).  I have been to an Apple store, but the people there only could recommend that I try some alternate applications to do the transfer (Kodak EasyShare).  I don't have much faith this will work.  I think I have this application on an old PC, and it is not something I want on my new computers.
    Is it possibled the size of this video just violates the transfer formats for files over USB?  If so, I will just delete the video and move on.  But the video is really something I wanted to save.  I would be happy to eliminate most of the video, but the ipad will not let me trim it.
    I also tried to import the video with Windows Moviemaker (free with W7).  It also does not see this file, but works fine on the other videos on the ipad.

    How to Transfer Photos from an iPad to a Computer
    http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
    Importing Personal Photos and videos from your iOS device to your computer.
    http://support.apple.com/kb/HT4083
    iTunes: Frequently asked questions about viewing and syncing videos
    http://support.apple.com/kb/HT2729
    Also check out the Photo Manager Pro app.
    https://itunes.apple.com/us/app/photo-manager-pro/id393858562
     Cheers, Tom

  • HT204291 Using Azul media player app on my ipad  Apple tv will only display sound but not video from movies.  Any ideas on a fix.  I set mirroring to on but it still does not display video.  It will display photos and video recorded from my iphone.

    Using Azul media player app on my ipad  Apple tv will only display sound but not video from movies.  Any ideas on a fix.  I set mirroring to on but it still does not display video.  It will display photos and video recorded from my iphone.

    Here are the steps for AirPlay:
    Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
    On your iPhone 4S/5 or iPad 2 or 3, double-click the Home  Button to view your recently-used apps.
    Swipe all the way to the right to until you see the  icon.
    Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
    Tap the  icon to see the list of available AirPlay devices.
    Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
    Now you should be seeing your iPad/iPhone on your TV.
    Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
    When you do that you will see an Orange screen
    Now click "Done" and play the video you want to watch and it will AirPlay

  • I am trying to import i frame from an SD90 video camera to iMovie, but it does not see the camera. Footage goes to i photo Why?

    I am trying to import video ( i frame) from an sd90 ( listed for mac) but i movie does not see the camera. It imports into i photo. Is this normal ?

    If you quit iPhoto and iMovie (with the camera still attached) then put the camera into VCR playback mode. Then launch iMovie and see if it can see the camera. If not, get out the power adapter for the camera and plug it into the wall, plug the camera into the power adapter. Reboot your Mac and wait for iPhoto to launch again automatically. Don't let it import the clips, just say No, quit the program. Then put the camrea int VCR/Playback mode, launch iMovie and check again to see if it can see the camera. Once iMovie sees it the first time it should be quicker to recognize it in future. But iPhoto does try to race in there and grab everything first.
    To turn this off go to iPhoto Menu in iPhoto > Preferences > Look for Connecting camera opens: (click on the pulldown menu and choose No Application) This effectively turns off iPhoto when you first attach the camera. And it opens the way to iMovie recognizing it quicker.

  • I-movie does not see i-DVD

    I-movie does not see i-DVD
    I am using a mac mini with system 10.3.7 with 1.47 Ghz Power PC G-4 and 512 MB Ram.
    I was having problems with my I-DVD crashing every time I asked it to burn a DVD or make a disc file.
    Then I reinstalled I-movie 5 and I-DVD 5 but now the imovie does not seem to see the iDVD. It asks for an i-DVD version 4 or higher when I have already installed the version 5. It does not seem to see it.
    I decided to try version 4 but the installation disc that I have for I-life 4 does not allow me to install I-movie and I-DVD from the disc because it says that one of those applications is open. Thus I had to drag the applications from another computer.
    So, I transferred an old version 4 for I-movie and I-DVD from another computer and when I try to make a DVD it comes up with the message that I need an I-DVD version 3 or higher and does not see the version 4 that is there.
    The result is that I can create a DVD from I-movie.
    If I try to create a DVD booting up on my firewire external HD with 10.3.4 and versions 4 of imovie and idvd, I have no problem.
    Ideas?
    Thanks you,
    Robert Najemy

    Hi Robert,
    Mac OS 10.4.2 is now available. Have you considered upgrading your OS?
    Having said that, I will qualify it by also saying that I do not know if that one item will solve your problem but I am wondering if your OS and your applications are now confused?
    Hope this helps.

  • Something went wrong with iPad photo/Video import and now iPhoto on Mac does not see content.

    I just connected my iPad (4.3.2) to my mac (10.5). It launched the synch process for photos and videos and everything went fine. I then clicked on one of the newly imported photos in iPhoto and it choked and ultimately closed the app and gave me message along the lines of "iPhoto quit Unexpectedly." I rebooted the machine and when it came up went to look in iPhoto and saw that the new photos/video were not there. They are still on the iPad (Fortunately!) However when I reconnect the iPad to the Mac it does not see any content to import. In essence it seems to think it did the import and is not aware that it lost the content.
    There's a couple possible solutions I'm interested in. One, are the photos/video somewhere on the Mac and just need to be dug up? I nosed around a bit but found nothing. Then other solution would be is there some way to force iPhoto to reimport what's on the iPad, ignoring that it feels it's already done this?
    Thanks,
    Wil

    Where did these photos come from to begin with? Did you import them from the iPad into iPhoto on your Mac? Is that what you are saying here?

  • My  iDVD  does  not  burn  the  movie.  It  ejects  DVD  before  finishing  burning.

    My iDVD  does  not  burn movie  on  DVD.  It  ejects  the  the  DVD  before  the  burning  is  finished!  Does  anyone  know  what  the  problem  is?

    Try cleaning the Superdrive and performing a SMC reset:
    Resetting the SMC (System Management Controller) on Intel-based Macs:
    http://support.apple.com/kb/ht3964  and
    http://support.apple.com/kb/HT1237?viewlocale=en_US
    Resetting your Mac's PRAM and NVRAM:
    http://support.apple.com/kb/ht1379
    If you are using a Wireless Keyboard:
    http://support.apple.com/kb/TS3273
    Then reboot your Mac and try again.

  • My iMovie on my 2011 iMac does not recognize video taken on my new iPad, is there a way to resolve this?  I would like to take movies on my iPad and make movies in iMovie on my iMac.

    My iMovie on my 2011 iMac does not recognized videos taken on my new iPad.  Is there a way to correct this, or perhaps I am doing something incorrect.  When I connected my iPad to my iMac, iPhoto popped up, but not iMovie.

    You have to import the movie into iTunes via iOS file sharing, then drag the movie from the file sharing window in iTunes to the desktop, then you can import the movie into iMovie. Here are the details.
    http://support.apple.com/kb/HT4792

  • TM Full system recovery does not see my backup folder

    Hello to you all Apple/Mac lovers ,
    So, as the title mentions, I need to do a full system backup after an HD failure. No problem so far my last backup was 11 minutes before the problem happened. Now, I re-installed Leopard and followed the instructions to proceed to a full system recovery. But the recovery software does not detect my external hard-disk or does not see the backup in it ... what's wrong ? What information would you need to help me solve that ? Thanks in advance ,
    Charles

    Are you doing this from within the Leopard installer or is this post installation? If the latter are you trying to migrate from your TM backup in Setup Assistant or are you simply trying to do a basic restore from your TM backup drive? If the latter be sure you change the Computer Name in Sharing preferences to match the one used before your reinstall.

Maybe you are looking for