IDVD doesn't respond after it says "Done" at the end of Burning

Firstly, I have burn many, many, MANY DVD's before in iDVD (for school camps, special occasions, etc.) and have met this problem before, but in a different way. Those times I was burning about 20 copies, and after about 7 or 8, it would say this problem. My solution was to press cancel, then start burning again IMMEDIATELY, and it would work again.
The Problem: that when burning a DVD (it's a project on Apple as a company. Kinda ironic, because it's all about how fantastic they are, and then this happens). What happens, is that iDVD processes the movies, menus, slideshows, etc. and then gets to the "Burn" part of the burning. Here, the process bar is slowly moving forward, and after about 5 minutes of burning (very normal for my mac) it ejects; BUT!: the menu left on iDVD stays on the "Done" screen forever (at the end of the burning, the remaining time is Done). I checked on my other computer and again on my mac, and it is positively blank (the drive also didn't make as much noise as it usually does when burning). This may have something to do with that it is the first time I have exported a Keynote to a QuickTime, and then put it into iDVD (and I also put some "Get a Mac" ads off the Apple website on it). I asked a good friend of mine about this, and suggested that I put the ads into iMovie '09 and then export into iDVD, just so that they are all definitely the same format, but it didn't work AGAIN! So I put the ads into Keynote, deleted them from iDVD, re-exported them and failed to burn AGAIN X 2! HHEELLPP!!!!!!!!!!!!!!!!!

Update: The problem still occurs, but I had the project due in today, so I put the quicktime of the Keynote on a flash-drive and ran it off my School computer (not a mac... unfortunatley).

Similar Messages

Edge Animate doesn't respond to trigger, auto-plays to the end while previewing in the browser.

I've this strange problem with EA.
I was working on a project which was doing pretty well. You may see it over here.
This afternoon I wanted to make some progress, opened the file, clicked preview in browser. What I saw was the auto-play of animation from start to end. No regard to triggers whatsoever. So, I downloaded the original file from the web server (which obviously is working as you can see from the above link), reopened in AE and tried to preview in the browser, same thing happened, doesn't respond to triggers, just auto-plays start to finish in one go. I hit publish again (with no edits, just loaded up the originals from server, saved and published.), and re-uploaded to the web server to see if it had anything to do with my local settings. It behaved same as the preview, auto play, as if there was no triggers.
Am i doing something wrong here? or is this a known bug? if so, is there a work around to this issue?
Thanks!
PS: I restarted the PC and reinstalled EA, that didn't help either.

Must be a problem with the graphics drivers or operating system.. Any other system malfunctioning reported ?
If yes, kindly contact your system admin and format your OS...
Must be a problem with compatibility, so please do the the above
Happy browsing

IDVD '08 doesn't respond anymore when trying to browse the media files

I created a new project, selected a theme and then clicked "Media" to drop the Media files into my DVD project. For some reason, after that, iDVD doesn't respond anymore. I see no disk activity (with iostat) and I see iDVD consuming a lot of CPU cycles (with top) .
Any idea why this might be happening? It is getting a bit frustrating.

tell us about the content you are trying to use within iDvd'08.
Might you have any Non-standard QT plugins on your mac (ie, Perian or Divx)?
also tell us how much available hard drive space is remaining on the boot volume / your main HD.
Take a look in your console log /crash reports and post the info on this forum.
apple > about this mac > more info > Software > Logs
http://docs.info.apple.com/article.html?artnum=302988
http://discussions.apple.com/thread.jspa?messageID=6682333&#6682333
Message was edited by: SDMacuser

My taskbar is blank in Firefox. It simply says 'Done' in the bottom l/h side. When I go back to windows the taskbar reappears with icons at r/h side.

My taskbar is blank in Firefox. It simply says 'Done' in the bottom l/h side. When I go back to windows the taskbar reappears with all icons at r/h side.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Delivery is to be done at the end user location not at the storage location

Hai Gurus.
I have a problem
I am working for a construction industry.. I had a storage location at say" X":. And in case of emergency for the material to the end user at different locations, delivery is to be done at the end user location not at the storage location.. Where to give the end user location address .As delivery address in PO item details will be plant address. pl help
regards
chandrasekhar

As i underdstand from your description of issue .You dont want to recive the material in the storage location of your main plant but you want to recive the goods directly to the end user from the vendor.This is typical scenario of Third party PO ..so kindly traise third part PO to vendor ..by changing the item category ...and so the delivery addfres popolutaed in ur PO will be directly from the ship to address from your sales order.rathewr than the storgae location you wd have specified in ur material master

TS1436 Why don't the song titles burn onto the CD

Why don't the song titles burn onto the CD

Even when you burn an audio CD with the CD Text option enabled you may well find that the CD player you use to listen to the CD doesn't support the feature, so it appears to have been unsuccessful.
tt2

I've downloaded adobe after effects and now at the end of downloading it appears "errot extracting t

I've downloaded adobe after effects and now at the end of downloading it appears "errot extracting the product installer (error 101). check for availbale disc space on your computer and try downloading the product again. I have 193 GB of free space in my system. ????

We cannot know. You are not telling us anything about your system. This error usually occurs due to running out of temporary disk space in the relevant folders. Check this:
Installation Preparations
Important Directories
Other than that, refer to this:
Troubleshoot Adobe Download Assistant
In short: Do a little housekeeping, download again.
Mylenium

Idvd doesn't open after update

I just updated iDVD and it doesn't open. I'm running the current OSX. Has anyone out there had this problem? And, Solved it.
Thanks

I'm not sure what you mean by "without mains"
Without the plug in the Wall - Main electricity inlet.
Dodn't see What Mac You were using - for Lap-tops one also takes out the battery for same time.
More general ideas.
Not knowing the origin to Your problem - General approach when in trouble is as follows.
• Delete iDVD pref file - or rather start a new user/account - log into this and re-try
iDVD pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named.
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple’s Disk Utilities application)
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK will work under Leopard)
• Program miss-match. iDVD’09 v. 7.0.4, Mac OS X.5.8 AND QuickTime 7.6.4 - is OK (does work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
Macintosh HD/Library/Application Support/iDVD/Themes/ zzzzzzzzzz
or
Macintosh HD/Users/Your log-in//Library/Application Support/iDVD/Installed Themes/ zzzzzzzzzz
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
No of Colors - must be set to millions
EdinSF writes that, The 10.6.3 update with an Open GL fix seems to have taken care of the problem.
Yours Bengt W

Comes up with a blank page and says done at the bottom. Have tried to clear cookies and cashe, doesn't help.

when I go to web site it says on the bottom bar waiting for stockhouse.com after a period of time it gives me a blank page and the bottom bar says done.While I am waiting for it to come up I can open internet explore and go to the same web site and connect with out problem.I have used Firefox for years but this is causing me to use internet explorer more than I want to. Thanks Dan

Many thanks, solved issue I have had for weeks

IDVD doesn't open after iMovie renders

We just finished rendering a movie in iMovie 11. The tutorial said that iDVD would open automatically and it just sits there. IDVD doesn't do a darned thing. The project is due in 3 days, so if anyone has the inside scoop, please let me know..
Thanks,
Sean...

Seems like a glitch in the process somewhere -- try these instructions from Apple to Share the movie:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mova719fafd.html
You mention the project was created in iTunes, but I assume you meant iMovie?
"Rendering" typically happens behind the scenes -- which command are you using in iMovie to render multiple times?
John

After Firefox updates I can see my tool bars, but the screen below is blank and I can't do anything in Firefox. I says "Done" in the lower left corner. What's up?

Following the automatic update of Firefox, which happens when I open it, it often occurs that I can't do anything in Firefox. All the tool bars appear, but below is a white screen. When I click on a bookmark, nothing happens except the word "Done" appears in the lower left corner and the screen remains white.

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
See also:
* http://kb.mozillazine.org/Browser_will_not_start_up
* http://kb.mozillazine.org/Error_loading_websites - "Error_loading_some_websites"

My macbook air doesn't respond after it sleeps automatically?

Basically, I set my macbook air to autosleep after one minute, but after autosleeping, I tried touching the trackpad and pressed the shut down button and nearly every button to open it but nothing worked. I ended up having to switch it off and restart it. Is there something wrong? :/

There's also a Facebook group which puts this issue in a more open public forum.
As stated quite a few times in the various forum discussions, Apple do not pay attention to what's going on here, so come and join us on Facebook as they can't ignore that :-)
https://www.facebook.com/groups/326421004166133/

When i select a pdf file for download in a webpage instead of automatically downloading the file and opening it using adobe acrobat I get a new blank window in the browser and it says done in the bottom left corner

when I select a pdf file within a webpage and click to download instead of getting the "download" window and the file automatically opening after download using adobe reader I get a blank webpage (in the same tab) and in the bottom left corner it says"done". No file is downloaded and if I click "back" I just return to the webpage containing the link.

Aha! The properties for the plugin file nppdf32.dll for Adobe Reader indicate the file is for Adobe Acrobat. This misidentification is then used by SeaMonkey as a label in the helper application list.
Adobe Reader 11.0.3.37: nppdf32.dll has version 11.0.3.37. This is the version in SeaMonkey's plugins folder.
Adobe Acrobat 7.0.8.218: nppdf32.dll has version 7.0.9.50.
As for having both Adobe Reader and Adobe Acrobat on the same PC, this generally works providing Reader is installed AFTER Acrobat. Reader is freeware, and I want to keep it current. Acrobat is purchaseware, and I cannot afford to keep buying upgrades or newer versions.

Revoke release of Plant maintenance order after change is done to the order

Hi
I need to know if thorugh some configuration I could enable the feature which revokes the release of a plant maintenance order after certain change is done to the order. Please help.
Thanks,
Ankbat

hi
you cannot revoke the status of released after changing the order. you can explore the use of user status profile
regards
thyagarajan

IDVD Doesn't Open after iMovie Encoding...

When I'm ready to Share my movie to iDVD, I do it. After a couple of minutes of encoding, after its complete (and it does finish), nothing happens. iDVD (which use to open every time after the encoding when selecting share to iDVD), now just sits on my dock lifeless. I've restarted my comp and checked to make sure the original ripped videos are there.

started a new project and it worked

IDVD doesn't respond after it says "Done" at the end of Burning

Similar Messages

Maybe you are looking for