IDVD Encoding/Rendering Error

I've started having a problem burning dvds from iMovie using iDVD. PowerMac G5, 10.4.11, iDVD 6.0.4 and iMovie 6.0.3.
About 60% through the Menu rendering, I get the folllowing Error message:
"Error during rendering/encoding, there was an error during rendering/encoding of the menu/slideshows. Burning process cancelled."
I logged into a different account and it worked fine. Back in the original account, I trashed the iDVD plist but to no avail. I still get the error. I've also used Onyx to repair permissions and optomize the system, but the problem still persists.
Any ideas would be appreciated.

An internet connection makes updating your mac so much easier. I wish I had a dollar for every time I found separate user accounts on the same machine acting completely different from one another .... more times than I can shake a stick at.
I'm currently running iLife'09 on this particular mac so I can't be of much help for iDvd6 updates at this moment.
I'm guessing the most current version is iDVD 6.0.4
Is this what you run on all your macs?
Message was edited by: SDMacuser

Similar Messages

  • IDVD 6 project rendering error

    I have done over 40 DVDs on my old powerbook, never had problem. Got my MBP 2.2 a week ago, tonight I render an image file as usual, it stops at 30% and shows rendering error message, what could be the problem? Thanks Alex

    I tried it again and same error message
    Error during rendering/encoding
    There was an error during rendering/encoding of the menus/slideshows. Burning process canceled.
    I am not burning the Dvd yet, this is how I do it. When my iDVD project is complete, I hit Shift+Apple key+R to render and make an image file, after that I burn DVD. I render this project on the MPB harddrive not my lacie hd, I do not have slideshows on this project either. Like I said, I have done the same thing too many times on PB without a single problem, any other thoughts? Thanks Alex
    Macbook Pro 15.4'' SR 2.2Ghz   Mac OS X (10.4.10)   Mini iPod / Lacie D2 triple 250 ext. drive/ Lacie D2 DVD±RW
    Macbook Pro 15.4'' SR 2.2Ghz   Mac OS X (10.4.10)   Mini iPod / Lacie D2 triple 250 ext. drive/ Lacie D2 DVD±RW
    Macbook Pro 15.4'' SR 2.2Ghz   Mac OS X (10.4.10)   Mini iPod / Lacie D2 triple 250 ext. drive/ Lacie D2 DVD±RW

  • Adobe Media Encoder Unknown Error

    I'm trying to export an Adobe Premier Pro file on Adobe Media Encoder. Each time I try, it gets about halfway through, then this error message comes up:
    - Source File: /Users/A25/Library/Caches/TemporaryItems/Incubus Trailer Rough Cut.prproj
    - Output File: /Users/A25/Desktop/Odyne Theatrical Trailer.mp4
    - Preset Used: HDTV 1080p 25 High Quality
    - Video: PAL, 1920x1080, 25 [fps], Progressive
    - Audio: AAC, 160 [kbps], 48 kHz, Stereo
    - Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
    - Encoding Time: 00:07:07
    Mon Apr 15 12:48:21 2013 : Encoding Failed
    Error compiling movie.
    Unknown error.
    I've tried different video presets (1440x1080, 1920x1080 etc), but this message has appeard every time. Any ideas how to export it?
    Thanks

    Please read here:
    "Error compiling movie" when rendering or exporting with Premiere Pro CS3, CS4, CS5, CS5.5, CS6
    and here:
    Adobe Forums: FAQ: What information should I provide when asking a question on this forum?
    Jeff

  • After Effects & Adobe Media Encoder Rendering Issue

    Hi,
    First of all,  just to give a background, I am running Windows 8 and Adobe After Effects CC. We had purchased the computer 2 weeks ago and I was working on a video and everything was fine in After Effects. I then went to render it using Adobe Media Encoder to get the H.264 file type that AE CC doesn't have anymore. AME rendered the first time but I had to make more changes. I went to render it a second time and AME crashed and my computer blue screened. Now when I go to Add compsition to media encoder the program shows the splash screen but then it crashes every time. So after some research I found that there were output settings that you can check to allow AE to render H.264. I rendered my video the first time and it worked fine. I had some mismatched audio so I had to make some changes to it again. I went to render it a second time this morning and I got an error message that said " After Effects Error: Rendering error while writing file...unable to delete existing file." This also crashed and blue screened my computer, now it won't let me render at all in either program. Are there any fixes to this problem?
    Thank You!
    Frank

    Did you re-boot? Did you try re-booting in safe mode? Did you add anything to your computer or run any updates between the first render and the time this problem started?
    Did you try creating a new comp, adding a single solid, and then rendering? If that works tell us about your source files including type and compression.
    If that fails then  make sure that you have run all the updates. Then, make sure you have not installed any 3rd party codec packs. Then, dig up the error log and look for anything you can find that starts with "unable" or "crash" and that may give you a hint.

  • Compressor 4.1 video rendering error 3 ?

    I'm getting compressor 4.1 video rendering error 3 while trying to process a file to output to 1080p
    Any help would be appreciated.

    Hi Russ,
    Thanks for your reply.
    I was using FCPx 10.1 and clicked on "Send to Compressor" to encode the video at 1080p before uploading to
    YouTube but each time I tried it processed for about 5 minutes (transcoding) and then failed (with Error 3)
    I fixed the problem by exporting the video from FCPX to a .MOV file and subsequently using that file as input to Compressor and outputing a 1080p file for upload to YouTube.
    Regards,
    Frank.

  • I'm getting Video rendering error: -50 and can't load my videos to youtube, or in a file.

    I can't share any video anywhere and am getting this error message:
    Video rendering error: -50
    Any help?
    I'm using iMovie.

    Have you tried to export Master File and use Compressor to encode. There are presets there ?

  • Media Encoder rendering MP4 files with AAC and M4V files leftover

    Hey all,
    Just a quick question. My computers' media encoder has started rendering mp4 files and leaving the m4v and aac files there once the render is complete. The mp4 is fine but it's a bit anoying and messy that it's not deleting the files afterwards. Anyone familiar with this issue?
    Thanks

    Sorry my computer AND media encover version. I run Creative Cloud on a new Mac Pro
    File seems to render fine
    Log info:
    - Source File: ***
    - Output File: ***
    - Preset Used: Match Source - High bitrate
    - Video: 1920x1080 (1.0), 25 fps, Progressive, 00:00:42:17
    - Audio: AAC, 320 kbps, 48 kHz, Stereo
    - Bitrate: VBR, 1 pass, Target 10.00 Mbps, Max 12.00 Mbps
    - Encoding Time: 00:13:13
    04/27/2015 03:55:51 PM : File Successfully Encoded
    No errors reported.
    And this is what I end up with.
    Is that helpful?

  • Adobe Media Encoder renders in Lossless, such as After Effects?

    Adobe Media Encoder renders Lossless like After Effects too?

    There are multiple codecs that can losslessly encode video. One example is the PNG video codec in a QuickTime container. Another example (which matches the After Effects output module named Lossless) is the Animation video codec in a QuickTime container.

  • SSRS 2008 R2 rendering error when executing a report

    The value '1' is invalid. Valid values are between '0' and '1'. (rrRenderingError)
    I am receiving the above error when running the report in SSRS 2008 R2. It has run find in the 2005 version. After research, I read that this issue caused by tablix split on a new page or something. However, I have not found anything to be the resolution. I
    installed the latest hotfix that I thought addressed this issue but still not working. Any suggestions outside of touching the report?Sonya

    The value '1' is invalid. Valid values are between '0' and '1'. (rrRenderingError)
    I am receiving the above error when running the report in SSRS 2008 R2. It has run find in the 2005 version. After research, I read that this issue caused by tablix split on a new page or something. However, I have not found anything to be the resolution. I
    installed the latest hotfix that I thought addressed this issue but still not working. Any suggestions outside of touching the report?
    Sonya
    We too are encountering this problem with reports migrated from 2005 to 2008. We are getting the rendering error only when trying to use the paging controls to navigate forward through the report. This is on SSRS 2008 R2 running SharePoint Integration. When
    the result set is empty we get the tablix errors mentioned instead. The reports ran fine prior to migration to SSRS2008.

  • Rendering error while writing to file...Quicktime

    Hi all,
    I am brand new here and have an urgent question. I have been getting an error in After Effects CS6 whenever I try to render to a quicktime movie that says "Rendering error while writing to file...An output module failed. The file may be damaged or corrupted."
    I have spent days trying to fix this and I have read other peoples posts with the same question but I have cleared my disk cache and reinstalled quicktime without success.
    Any help would be great I am not super technology advanced so try to keep it simple if you can.
    Computer Specs:
    750gb Hard Drive
    8gb Ram
    Intel Core i5
    Nvidia Geforce GTX 660M graphics

    Start by going through all of the troubleshooting suggestions here:
    http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime-errors-with-after-ef fects.html
    If you need additional help, please provide answers to all of the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

  • Portal rendering errors using IE10

    Hi,
    We've recently patched all of our SAP systems (portal and backend) and checked we're at the requisite level for IE10 support in the PAM.
    We're currently in the process of testing all of our applications for IE10 compliance and have identified two issues which someone may have experienced or can advise upon:
    Issue 1) SAP Transaction iView (ITS) raising following error in popup dialog box 'The application was stopped due to a critical rendering error.  The IE compatibility view is not supported (Note 1586993).'
    This iView connects from our portal (EP 7.0 EHP2 SP14) to a backend SAP ERP (ECC) system patched to NW EHP3 (SP09).
    Note 1586993 is not particularly helpful as it simply states 'The administrator must assure, that IE frame content is compatible and correctly configured'.
    Additional research identified note 1970427 which I have applied to the backend system - subsequently I added application parameter 'sap-ie=EmulateIE8' to the iView (both within the iView config and at runtime) but this made no difference to the behaviour.
    I checked the user's framework page and the 'Browser Document Mode' iView is linked in and has it's property set to 'IE=EmulateIE7'.  I tried moving this iView further up the order sequence (i.e. putting it first) as well as changing it's setting to 'IE=EmulateIE8' but once again this had no effect on the behaviour.
    I notice when logging into the portal, at first the F12 console shows Browser Mode = 'IE10', Document Mode = 'IE5 quirks' but when the problematic iView renders, the Document Mode changes to 'Quirks' which I'm assuming is why the error occurs.
    I'm not sure what I can do to make the iView render in 'IE5 quirks' mode?
    This iView is called dynamically at runtime with some URL parameters that are passed to the backend transaction so I cannot follow the advice in note 1590563.
    Issue 2) BSP iView for 'CRM Web Interaction Centre' - all F4 dialog popups are displaying empty with no content, e.g. Inbox search help for classification field
    This iView connects from our portal (EP 7.0 EHP2 SP14) to a backend SAP CRM system patched to NW EHP2 (SP04).
    I tried setting my user parameter CRM_THTMLB_IE_COMP to 'IE8' but this had no effect.
    Note, if I set the IE10 property 'Display intranet sites in Compatibility View' both issues above are resolved.  We're trying to avoid this as we've had this setting in place for a number of years and it affects the correct operation of non-SAP applications.  Given there are numerous ways of making SAP operate by emulating older compatible IE versions, I expected we could work around needing to do this but it may be a last resort.
    Please offer any advice you can as it will be much appreciated.
    Thanks,
    Alan

    Hi Lawrence,
    We have a mixture of custom and SAP standard portal applications developed over the past 10 years.
    UI technologies include: Java Server Pages, Web Dynpro Java, ITS, BSP, Web Dynpro ABAP and BEx.
    Quite honestly, the portal hasn't proved to be the best SAP product in our experience, and we've tried hard to keep it patched up-to-date. OK, it offers integration and navigation but that capability is offered by the Fiori Launchpad, albeit presenting new challenges and possibly some limitations on the integration of existing applications.
    We could have opted to integrate the Fiori Launchpad with the portal but decided it was cleaner to perform a standalone installation on our newly built NetWeaver Gateway server.
    We're starting our Fiori journey by implementing selected SAP delivered apps for the first pilot projects then plan to replace or migrate existing portal applications.
    We'll replace any custom Java apps with UI5 apps built in-house as we need to rationalise UI technologies and this one is a prime candidate given the lack of in-house skills and SAP direction. 
    Our expenses application is currently an SAP ITS transaction iView in the portal but will be replaced with the My Travel and Expenses Fiori app this year.
    CRM Transaction Launch isn't used often so we may kill it off.
    BSP's are solely in the CRM area and I read they're not supported yet in the launchpad - hopefully they will be in a future version (?).
    We have quite a few Web Dynpro ABAP applications so these will take some time to rewrite if required (assuming we cannot port them).
    BEx may be replaced with Business Objects or taken out of the portal in favour of the Excel version we also run (portal offers little value for massive reports so users download to Excel in any case).
    My understanding is that the Fiori Launchpad does support integration of legacy SAP technologies so we'll need to gauge if and when we each a tipping point where any remaining portal applications can either be integrated with the launchpad or replaced with alternative new applications. Obviously all of the above will take time.
    We're working on developing a custom Fiori/UI5 theme and have hit a few snags. We've just patched to SP09 on our development Gateway system but the UI Theme Designer is still a bit flaky (we run the tool there but could also do this on our portal). My colleague is now trying the cloud version to see if that proves a more viable route. In either case we'll be seeking SAP assistance as we really want our UI5 apps to adopt recently developed corporate branding rules. Our portal currently uses a copy of Gold Reflection with simply the SAP logo replaced for our company's logo.
    If you have any further queries just let me know, or similarly advice/experience on the above.
    Hope this helps.
    Alan

  • Rendering Error: CS6 Quicktime crash- error  (-1610153464)

    Hello,
    My employer recently purchased Adobe Suite CS6. I mainly Use After Effects for my job. I have been getting the following error whenever I attempt to render into Quicktime format.:
    "After Effects error: Rendering error while writing to file "C:\Users\User1\Desktop\File_Name.mov". An output module failed. The file may be damaged or corrupted. (-1610153464)"
    I have searched for solutions to this online. Rebooted my machine after reinstalling the latest Quicktime; deleted queued renders; made sure to switch the compatibility for "AfterFX.exe" to Windows 7. I have also grabbed any recent updates.
    One of our clients has asked for files to be delivered in Quicktime format. It would be nice to find a resolution for this issue soon. Thanks for any aguidance with this issue in advance.
    I will be glad to provide any machine specs if necessary.

    Don't worry, K-Lite did not cause this problem. Dave just likes to blindly blame K-Lite for every problem on earth. This is a QuickTime problem as obvious by the error itself and also by the fact that DaftlyPunkish is getting the same error on MacOS.
    Try this
    1) Uninstall QuickTime
    2) Search the Windows ProgramData folders for left-over QT files such as quicktimepreferences.qtp and remove them.
    3) Install QuickTime
    4) Make sure that AE and QT are not blocked by your firewall. Test with your firewall completely disabled.

  • Rendering error whilst writing to file /filename etc./ An output module failed

    I'm trying to render my composition in the latest AE CC 2014.  I get the following error with all composition sizes and with different codecs:  Rendering error whilst writing to file /filename etc./ An output module failed. The file may be damaged or corrupted (-1610153464). Can anyone help me sort this problem?

    AE build number? Codec used? System OS? 

  • After Effects Rendering error (-1610153464)

    I'm trying to render and export a short sequence that I created solely in Adobe After Effects CC.  I immediately get the response: After Effects error: Rendering error while writing to file.... An output module failed.  The file may be damaged or corrupted. (-1610153464).  Not using any external plug ins, tried exporting to desktop and external hard drive.  AE version 12.2.1.5, Mac OS X version 10.9.2, Quicktime version 10.3.  I realise other people have posted this error before but I'm not using external plug ins, any advice appreciated.

    Start here: http://adobe.ly/Uc4dtH

  • I keep getting this msg in iMovie10.0.1: Video rendering error: -50

    My movie stops renedering. I get this msg: Video rendering error: -50

    Dear friend,
    Did you find a solution?
    Best regards
    Ricardo

Maybe you are looking for